4 side planing used for sale

Weibert WJ-FS-41 Top Dressing thickness planing machine Dressing table length 1800mm Planer width 410mm Planer shaft self-adjusting planing knives Thickness height 3-230mm Feed speed 7m/min Professional dressing stop Motor 5.5kW 400V Numerical display of planing height planed dressing and thickness tables Spiral planer knife shaft WJ-300200

Flush planer SCM model F410N : - 410x2610mm tops - shaft D.120mm with 4 knives - control panel on rear pine cone Machine according to CE standards.

Motor power 1.25 kW Power consumption 1.8 kW Shaft speed 6700 rpm Weight 93 kg Connection: 400 V / 50 Hz with integrated filter bag for self-suction

Planing width approx. 490/500 mm (at end position dressing stop) Table width 52 cm Table length 2210 mm Tersa planing shaft (4 knives) Motor power 7.5 kW Table height adjustment electric Thickness table guided on 4 spindles 2 feed speeds manual star-delta switch Emergency stop switch Suction nozzle Ø 160 mm Power: 400 V, 50 Hz, 3~, 15.5 A

Key data: 500 , 2600 , 4

Weinig planing machine Product name: Planing machine Type: AF51 Manufacturer: Weinig Machine number: unknown Year of manufacture: unknown Condition: Used Technical details: - Total table length: 2,600 mm - Feed table: 1,380 mm - Removal table: 1,080 mm - Table height: 810 mm - Chip removal: 0 – max. 8.0 mm - Stop (L x H): 1,250 x 155 mm (obliquely adjustable up to 45° without scaling) - Planing width: 500 mm - 4-knife shaft with 4 strip planing knives - Suction nozzle: 160 mm - Power: approx. 3kW - Weight: approx. 750 kg - 4 knives installed with slight signs of wear - 1 piece Barkomat adjustment gauge - the engine and the knife shafts have been re-mounted - the table lips have been re-milled (approx. 8 mm slots) to reduce the noise level. minimize Machine dimensions/set-up dimensions (L x W x H): 2,600 x 1,350 x 810 mm Transport dimensions (L  ...

SPECIFICATIONS: Total length : 2200 mm Width: max. 410 mm 4 planing knives Dressing height: max. 200 mm Installed power 3 KW

Technical data (subject to change) Working width approx. 500 mm Chip depth as well as hollow and pointed joint indication Speed approx. 5,000 rpm Swivelling dressing stop Brake via foot pedal Weight approx. 950 kg

Surface reference plates, roughness dimensions MASSI planing TGL 4763 Rz 1.0 μm - Rz 10 μm in wooden box Dimensions: 345 x 125 x 40 mm

Surface reference plates, roughness measures MASSI planing TGL 4763 Rz 10 μm - Rz 80 μm in wooden box Dimensions: 345 x 125 x 40 mm

Surface reference plates, roughness measures MASSI planing TGL 4763 Rz 6.3 μm - Rz 160 μm im Holzkasten used, tested ! Dimensions: 345 x 125 x 35 mm

Surface reference plates, roughness dimensions MASSI planing TGL 0-4763, DIN4763 Ra 1.0 μm - Ra 10 μm in wooden box used, tested ! Dimensions: 345 x 125 x 40 mm

Surface reference plates, roughness measures MASSI planing TGL 4763 Rz 6.3 μm - Rz 160 μm in wooden box Dimensions: 345 x 125 x 40 mm

Planing width 410 mm Xylent Shaft Electric thickness table lift with digital display AVAILABLE FROM STOCK

Surface comparison plate set, roughness dimensions MASSI planing, end milling, turning TGL 4763 planing: Rz 6,3 μm - Rz 160 μm Face milling: Rz 6.3 μm - Rz 80 μm Turning: Rz 3.2 μm - Rz 80 μm in 3 wooden boxes used, tested ! Dimensions: 345 x 125 x 105 mm

Straightening planer AF 3 E Product name: Planing machine Manufacturer: Julius Lindner & Co. Görlitz Type: AF 3 E Year of construction: 1966 Machine number: 3420 Condition: used, cleaned, completely refurbished and checked! Technical details: • Machine dimensions (L x W x H): 1,480 x 300 x 770 mm • Table size (L x W): 1,480 x 700 mm • Knife shaft speed: 5,400 rpm • Number of knives: 2 • Weight: 400 kg • Suction nozzle diameter: 120 mm Engine data: Voltage: 380 V Power: 1.5 kW Speed: 2,870 rpm The machine has been completely refurbished. The flat belt, the motor circuit breaker, the supply lines and the motor were renewed. Furthermore, a connection for an extraction system was retrofitted. Price: €1,250.00 (EUR) plus VAT ex Grunow (Brandenburg) (Subject to changes and errors regarding technical data and prices!)

JPT-310 Dressing-thickness planing machine Planer width:310mm Planer shaft:3-strip knife Engine Power:230/400V 4.7 HP Passage height:3-225mm G&JET-10000290T

Weibert FS 32 Dressing-thickness planing machine Dressing table length of 1500mm Planing width of 320mm Motor 3KW (4HP) S1 100% continuous load operation Max. chip removal of 5mm Dual folding system of the tables to the rear with spring support Thickness height from 4-225mm 3 Automatic planer knife shaft Feed speed. from 8m/min. Table dimension of the thickness table 700x316mm Weight approx. 420 kg Machine tables and aggregate made of cast iron WJ-300100 mreE The following options are available at an additional cost: Engine 4.0 KW (5,5 HP)S1 100% WJ-300103 Wescott Chuck 0-16mm WJ-300102 Slotted hole drilling rig FS 32 WJ-300101 Professional planing stop FS 32 WJ-300104 Side planer stop WJ-300105 Planer knife 320 HSS G&WJ-BA-320-HSS PLEASE INQUIRE ABOUT SPECIAL PRICES!

Weibert SD 410 Dressing thickness planer new SD 410 incl. spiral knife shaft and comfort package electric height adjustment of the thickness table 4.5KW 400V 50HZ Star Delta Switch Dressing table length 2000mm Thickness table length 860mm (890mm) 4 column guide in the thickness table Planing height 250mm Dressing tables can be folded out in a dual way Dressing stop from 45° to 90° now only for a short time in price with 4-knife shaft The comfort package includes: Digital display of thickness table adjustment 2 feed speeds 6 and 12m/1 Thickness planer table extension Built-in auxiliary stop G&RO-SD410KO-SP Special price: SD 410 incl. spiral knife shaft and comfort package

Key data: 410 mm, 2600 mm, 4 St.

SCM planing machine F410 Product name: Planing machine Type: F410 Manufacturer: SCM (Italy) Machine number: AB.43770 Year of manufacture: unknown Condition: used, revised and checked Technical details: -Total length of both tables: 2,600 mm - Length of feed table: 1,450 mm - Length of acceptance table: 1,150 mm - Planing width: 410 mm - Diameter knife shaft: 120 mm - Number of planing knives: 4 pieces Tersa knives - Blade shaft speed: 5,000 rpm - max. chip removal: 5 mm - 1 x suction nozzle, diameter 120 mm - 1x joining stop (length: 1,100 mm, height: 170 mm, tiltable 90° - 45°) - 1x folding stop Engine data: - Voltage: 380 V - Current: 6.5 A - Frequency: 50 Hz - Power: 5.5 kW - Speed: 2,800 rpm Machine dimensions (set-up dimensions) L x W x H: 2,600 x 1,200 x 1,050 mm Transport dimensions (L x W x H): 2,700 x 1,200 x 1,200 mm (on pallet) - Number o ...

Planer SCM F520 CE Working width 520mm 4kw motor 4-knife shaft Traditional knives Hydraulic raising and lowering of the worktop Main sampler adjustable at an angle up to 45 Length of table tops 3000mm CE Certificate

Weibert WJ-FS-41 Top Dressing thickness planing machine Dressing table length 1800mm Planer width 410mm Planer shaft self-adjusting planing knives Thickness height 3-230mm Feed speed 7m/min Professional dressing stop Motor 5.5kW 400V Numerical display of planing height planed dressing and thickness tables Spiral planer knife shaft WJ-300200

Weibert FS32 Dressing thickness planing machine Dressing thickness planer FS32 with spiral knife shaft Weibert FS32 Planer width: 320mm Spiral knife shaft Motor power: 4KW n=4500rpm, 400V Passage height: 4-225mm Professional stop Digital height adjustment WJ-300100 OPTIONS AT EXTRA COST: Slotted hole drilling device Wescott chuck 0-16mm Driving device Dressing table extension adjustable 750mm

Weibert FS 32 Dressing thickness planing machine Planer width: 320mm Planer shaft: 3-reversible knife shaft Motor power: 3KW n=4500rpm, 400V Passage height: 4-225mm Professional side stop WJ-300100 OPTIONS AT EXTRA COST: with professional dressing stop Slotted hole drilling device Westcott chuck 0-16mm Driving device Height adjustment digital Drive motor 4KW S1

Key data: 510 mm, 2250 mm, 4 St.

Specifications/Equipment: - Planing width 510 mm - Chip removal max. 8 mm - Table length 2250 mm (dual folding system with spring support) - Swivel dressing fence with parallelogram guide - Dressing protection "Comfort" - 4-knife system planer shaft, 510 mm - Speed 4,600 rpm - Suction nozzle Ø 140 mm - Connection: 400 V, 50 Hz, 3~, 5.5 kW - Weight approx. 700 kg

Ref. -No.: 10103 Manufacturer: MAAG Year of construction: 1976 Type of control: Konventionell Control: N/A Storage location: Halberstadt Country of origin: Schweiz Minimum number of teeth: 6 Max. Number of teeth: 300 Serial no.: 4216 Gear width: 200 mm Max. Pile driving: 225 mm Max. Wheel Diameter: 750 mm Min. Wheel Diameter: 30 mm Table Diameter: 500 mm Max. Module: 10 mm Min. Module: 1 mm Spiral Angle: 0/60 °

Cutting and planing machine MAKA / Weinig • Lift table • Multi-rip saw MAKA type V350: o Year of construction: 1996 o Chain width (mm): 350 o Cutting height max. (mm): 120 o Engine power (kW): 22 o Feed rate (m/min.): 0 – 40 • Material transfer to the moulder • Moulder Weinig PFA 14/7: o Working width (mm): 140 o Shafts: 7 o 1st shaft: bottom o 2nd shaft: right o 3rd wave: left o 4th shaft: right o 5th shaft: top o 6th shaft: bottom o 7th wave: Uniwelle

Key data: 500 mm, 2550 mm, 3 St.

SPECIFICATIONS: Max. width of the work table mm: 500 Total length of the 2 work tables mm: 2,550 Number of knives: 3 Installed power kW: 5.0

Key data: 500 , 2840 , 4

TRADE Plane Model CM500

Dressing thickness planer Duco ADM 65 comb. Planing width 650 mm Planing thickness 220 mm 2 knives Tersa Wave Articulated Pressure Roller Length dressing table foldable 2300 mm 8.5 hp The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Key data: 500 mm, 2600 mm, 4 St.

SPECIFICATIONS: Width of work tables mm: 500 Length of work tables mm: 2,600 Number of blades: 4 Diameter mm 120 Installed capacity KW: 4,0

REX HOMS 2050 Trimmer Machine year 1991 The machine is located in Spain.

Hombak 630 Dressing thickness planer Planing width 630mm 4 Knife shaft Suction nozzle diameter 180mm 2 feed speeds Thickness planer height 220mm 2 rollers in thicknessing table Professional dressing fence Planer Knife Adjustment Gauge Motor 5.5kW 400V 50Hz Motor for feed 2kW 400V 50Hz G&2969

Key data: 110 mm, 2000 mm, 3 St.

SPECIFICATIONS: Max. machining width mm: 110 Table length mm: 2000 Number of knives: 3 Voltage: 380 volts

Key data: 510 mm, 2450 mm, 2 St.

Gebr. Planer REX A510 YOC 1981 Motor power: 4 kW Planing width: 51 cm Table length: 245 cm 2-Knife Shaft Strip Plane Knife Working height: 100 mm Additional overarching fence (standard dressing fence) incl. 2 rollers Feeder Wood Type ETK 0.3 / 0.5 HP Aigner Relief Stop Weight: approx. 950 kg Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.

Key data: 260 mm, 1300 mm, 3 St.

SPECIFICATIONS: Table width mm: 260 Table length mm: 1,300 Number of knives: 3 Voltage: 380 volts

SCM F410 planer Working width 410 Length of worktops 2610mm 4 knife shaft Shaft with traditional knives Angled fence 3kw power main motor Power supply: 380V Extraction nozzle 110mm Weight 700kg

Key data: 500 mm, 2620 mm, 4 St.

SPECIFICATIONS: Width of slabs mm: 500 Length mm: 2620 Roller with 4 blades Voltage: 380 volts

JPT-410 Dressing thickness planer 410mm Planer width:410mm Planer Shaft:3-Strip Knife Shaft Motor power: 400V 4 KW Passage height: 3-225mm G&JET-10000295T

Key data: 500 mm, 2600 mm, 4 St.

SPECIFICATIONS: Max. working width mm: 500 Table length mm: 2600 Number of knives: 4 Installed capacity: KW 5.0

Weibert fs 52es SPIRAL Dressing thickness planer Planing width 520mm Spiral knife shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503502

Weibert fs 52es TERSA digital Dressing thickness planer Planing width 520mm Tersa 4 Knife Shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm Electric height adjustment of the thickness table 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503511

Weibert ADH 26C Dressing thickness planer Dressing table (LxW): 1120 x 275 mm Thickness table (LxW): 545 x 258 mm Working height 830 mm Thickness: 5-225 mm Max. chip removal 3 mm Max. planing width 258mm Planer shaft diameter: 70 mm Planer Knife 3 Speed 5200 1/min Feed rate 5.5 m/min Motor: 1.7 kW 400 and in 230V Suction nozzle diameter: 100 mm Weight 170 kg G&STÜ-5904026 relkm23 Optional 400V G&STÜ-5904027

Weibert ADH 31C Dressing thickness planer Dressing table (LxW): 1295 x 325 mm Thickness table (LxW): 545 x 308 mm Working height 850 mm Thickness: 5-225 mm Max. chip removal 3 mm Planer shaft diameter: 70 mm Max Planer Width 308mm Planer Knife 3 Speed 5200 1/min Feed rate 7 m/min Motor: 2.2 kW 230V Suction nozzle diameter: 100 mm Weight 210 kg G&STÜ-5904031 relkm Optionally with 400V G&STÜ-5904032

Weinig Uniplan double-sided planer Planing width 220mm Planing height 15-120mm Horizontal spindle power 2x 5.5kw Spindle speed 6000r.p.m Spindle diameter 50mm Spindles supported on both sides Feed speed 6-32m/min 3kw feed motor

Four-side planer KUPFERMUHLE 600x200mm - after technical review - German production - PLANING HEIGHT ON TWO AND FOUR-SIDES 200 mm - ideal for wet wood - electric height adjustment - electric adjustment of the left head - double feed chain planing width 600 mm planing height on two and four sides 200 mm power of vertical spindle motors 2 x 8.6 kW motor power of the lower shaft 5.5 kW upper shaft motor power 7.5 kW guiding ruler electric height adjustment adjustable vertical heads four upper pulling rollers four lower pulling rollers two take-up pull rollers 4 knives per shaft diameter of shafts 150 mm six types of feed speed 7 / 9 / 11.5 / 14 / 18 / 23 m/min row of anti-recoil pawls spindle diameter 30 mm / 100 mm material pressure at the left head dimensions (length/width/height) 260 x 190 x 205 cm weight 3500 kg

Four-sided planer Profimat 23 E – German production, WEINIG brand – for 6 heads – technical documentation – universal spindle – odometer reading 7662.7 mth TECHNICAL PARAMETERS: planing width 230 mm planing height 160 mm 1 lower spindle 5.5 kW 2 right spindle 3 left spindle 11 kW 4 top spindle 11 kW 5 lower spindle 7.5 kW 6 universal spindle 3600 7.5 kW adjustable spindles spindle diameter 40 mm feed continuously adjustable 5-24 m/min feed motor power 4 kW pneumatic clamp four steel upper pulling rollers three upper pulling rubber rollers rubber roller in the top to pull electric height adjustment tabletop length 2480 mm spigot diameter 140 mm pneumatic lock of the universal head Dimensions 470x190x200 cm weight 2800 kg

Four-side planer Weinig Powermat 500 - year of production 2008 - German production - PowerCom control - saving profiles with tools and positions - PowerLock tool holder - a set of heads included in the price planing width 300 mm planing height 200 mm PowerLock tool attachment PowerCom control with positioning of the upper and left spindles 1 spindle 11kW 2 spindle 11 kW 3 spindle 11 kW 4 spindle 15 kW 5 spindle 15 kW milling spindle 1.5 kW 12000 rpm spindle speed 8000 rpm feed continuously adjustable 6-36 m/min feed motor power 4kW four upper steel pulling rollers one rubber upper pulling roller one roller in the top pulling air cushion in the table automatic central table lubrication automatic lubrication of spindle guides length of the feeding table 1970 mm spigot diameter 2x140 mm 3x160 mm 1x80 mm total power 70 kW 140 A Machine dimensions 500x225x242  ...

Key data: 400 mm, 2600 mm

SPECIFICATIONS: Work table size mm: 2600 x 400 Installed capacity: KW 5.0 Complete with hole punch, knives and regulator

Key data: 500 mm, 2800 mm, 4 St.

Technical details: - Max. planing width: 500 mm - Maximum chip depth: 5 mm - Length of feed table: 1,300 mm - Length of the take-off table: 1,500 mm - Total length of the table: 2,800 mm - Table height: 800 mm - Max. workpiece length without support: approx. 1.5 m - Length of the joining fence (Aigner joining fence with integrated auxiliary fence): 1,300 mm - Height of the joining stop: 150 mm - Joining stop adjustable up to 45° and extendable over the entire width of the table - Diameter of the TERSA knife shaft: 125 mm - Nominal speed of the TERSA knife shaft: 5,000 rpm - Number of planer blades: 4 pieces - Minimum width of planer blades: 17 mm - Diameter of suction nozzle: 160 mm - Required air velocity: min. 20m/s - Required air volume: 1500 m³/h - Vacuum at 20m/s air velocity: 705 Pa - 6 x machine shoes with adjustment screws - incl. EMERGENCY STOP switch En ...