2000 kw used for sale

Aburg 470C-2000-800 SKU: 49 Availability: In stock Built: 2006 Brand: Arburg specifications Spray weight: 510 g Closing force 2000 kN Screw diameter: 60 mm Spray pressure: 1380 bar Tie bar ratio: 470x470 mm Clamping plate size: 730 x 730 mm Tool installation height min.: 250 mm Control: Selogica Language: Polish Power: 44.9 kW Engine hours: 57310 h Weight: 6830 kg Air valve: Yes

ERMAKSAN LASERMAK 6000 6X2 laser cutter was produced in 2014. Technical parameters: – laser source: 6000 W CO2-laser GE Fanuc C6000i-Model C – RF-excitation: 2 MHz – power stability: ± 2% (power monitor) – laser wave length: 10.6 μM – beam mode: Fanuc Low Order Mode – laser shutter: mechanical safety shutter – laser gas composition: CO2 / He / N2 – gas consumption by laser: 20 l / h – cooling water flow rate: 250 l / min – maximum cutting capacity: mild steel 25 mm (during tests the maximum achieved: 30 mm), stainless steel 15 mm, aluminum 12 mm - machine activation time: 22899 h - working time: 10122 h - cutting time: 8429 h – total energy requirement: 100-120 kW – cutting head focal length: 5 -7” -10 inch – maximum worksheet size: 6150 x 2000 mm – maximum burden capacity: 4000 kg – machine axes: 5 axes [X, Y, Z, U (X2), V] – axis ...

Metal cleaning plant make BUPI-CLEANER type 5 HFabr. -No: 8022 Year 1980Inside dimension: 1500 x 1500 x 1000 mmBasket size: 1250 x 1250 mmWater content: 300 - 500 lMax. Heating temperature: 70 °Heating time of the car wash approx. 1 hr.Spray pressure: 4.3 barCleaning time approx. 10 - 15 min.Drive power: 7.5 kWHeating power: 9.0 kWDimensions L x W x H: 2000 x 2000 x 2400 mmWith- Time thermostat- Flap door- Access car with 2 basketsused, from an operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double-ended pipe end brush deburring machine Fabr. SCHOELLERPipe diameter: 20 - 70 mmsmallest pipe length approx: 200 mmlargest pipe length approx: 2000 mmBrush pressure: adjustable by handwheelBrush height: adjustable by handwheelPipes are laid manually, after deburring case in onesuitable containermotorized adjustment of tube length (motor missing)Weight approx: 2000 kgExternal dimensions L x W x H: 6200 x 1500 x 2100 mmWith- Control panelused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double-ended pipe end brush deburring machine Fabr. SCHOELLERPipe diameter: 20 - 70 mmsmallest pipe length approx: 200 mmlargest pipe length approx: 2000 mmBrush pressure: adjustable by handwheelBrush height: adjustable by handwheelPipes are laid manually, after deburring case in onesuitable containermotorized adjustment of tube length (motor missing)Weight approx: 2000 kgExternal dimensions L x W x H: 6200 x 1500 x 2100 mmWith- Control panelused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

The NOVOTECNIC EUROPA FTD-6 E-39 oil mist separator was built in 1992. Technical parameters: - capacity: 2000 l - nominal filter capacity: 500 l / min - filter unit:> 0.003-0.005 mm - connection power: approx. 15 KW - machine dimensions (L x W x H): 4000 x 1200 x 2800 mm - weight: approx. 2000 kg

Inv. Num. : 5457 Type: UB 63/2000 Producer: HOL-MONTA Created: 2001 Parameters: Control system: Kavalír Maximum grinding length: 2000 mm Grinding diameter: 630 mm Tip stroke: 375 mm Total power requirement: 41 kW

Banding system ATS US 2000 AB Cornerline; good condition; serviced and tested by ATS customer service; bandwidth 30mm; frame size 360x160mm; Min. Product width 80mm, max.165mm; Max. Product length 270mm; Max. Produnkt height 110mm; Compressed air required. Ultra sonic banding machine ATS US 2000 AB Cornerline; good condition; cleaned and checked by the support of ATS Germany; band width 30mm; frame size 360x160mm; min. product width 80mm, max.165mm; max.product lenght 270mm; product hight 110mm; pressure air needed.

Belt grinding machine GRIT GI 150 2H, switchableSerial -No: 1121152 Year 2011with surface grinding module GIL and radius grinding module GIRTechnical specifications:BELT SANDERBelt dimensions approx.: 150 x 2000 mmSpeed: 3450 rpm.Voltage: 3 x 400/440V 50/60HzWeight approx. 80.6 kgwith- Machine foot GIB Serial-No: 1120014 year of manufacture 2011 Weight approx. 17 kgSURFACE GRINDING MODULE GILSerial-No: 1114072 built in 2011Tape dimensions approx.: 150 x 2000 mmDimensions of profiles/flat material max.: 100 x 100 mmVoltage: 3 x 400V 50/60HzApprox. weight: 69 kgfor longitudinal grinding of square tubes, profiles and flat materialsRADIAL GRINDING MODULE GIRSerial-No: 1124121 year of manufacture 2011Band dimensions approx.: 150 x 2250 mmDimensions of profiles/flat material max.: 120 x 150 mmTubes up to diameter: 20 - 150 mmWeight approx. 109 kgwith- integrated depth stop for series usefor  ...

Ultrasonic cleaning system FiSA VST 2000/P, YOC 2014 - Ultrasonic power: 8.4 kW - Component weight max.: 5000 kg - Volume: 2000 l - Heating capacity: 51 kW - Internal useful dimensions L/W/H: 1600/ 1000/ 1250 mm - Space requirement (W x D x H): 12 x 3.2 x 2.1 m - Total power: 60 kW - Condition: very good details Mould cleaning for plastic injection moulding, extrusion, elastomere, die casting, core boxes, moulds; well-kept facility, was hardly in use

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 2000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...

spindle diameter: . mm x-travel: . mm y-travel: . mm table length: 2000 mm table width: 2000 mm table load: 25 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 3050 mm turning diameter over slide rest: 2500 mm turning length: 21200 mm Control: Siemens type: 840D turning speeds: 0,236-60 U/min faceplate: 3000 mm main drive motor: 200 kW tailstock quill diameter: 900 mm roll stand: steady: 1200 mm steady: 1200 mm steady: 750 mm steady: 750 mm with live steady: 2000 mm faceplate: 2000 mm Thickness: 330 mm workpiece weight: 200 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller conveyor length: 2000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 55 kg length in width: 620 mm length in total: 2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1000 mm table height (lateral area): 100 mm weight: 354 kg The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Plasma nitrided 750 version with scale - Including 4x basic equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1000 mm table height (lateral area): 100 mm weight: 354 kg The welding tables are provided with a scale as standard. Special set - including tool set of 16 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Plasma nitrided version with scale - Including 4x basic equipment - incl. 16 tool set 3: + 8x 160610.N clamp + 4x 160630.N clamp + 4x 160645.1.N prism + 24x 160510 bolts + 4x 160410.N stop + 8x 160420.N stop + 8x 160108.N angle + 8x 160110.N angle + 2x 160162.N angle + 1x 160134 + 36.N angle + 1x 163999 accessory set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Plan copy lathe make RAVENSBURG type K 600 KHKom. -No: 8792 built in 1972Technical specifications:Turning diameter over bed: 1000 mmTurning diameter over facing slide: 600 mmfor face plates up to: 800 mm dia.max.distance between faceplate and support: 600 mmLongitudinal feed: 1 - 170 mm / minPlan feed: 1 - 170 mm / minMain spindle diameter: 166.68 mmSpindle bore: 80 mm12 spindle speeds: 1.7 - 600 rpm.gr. torque on the faceplate: 500 mkggr. workpiece weight: 500 kgDrive power: 22 kWWeight approx: 5.8 tExternal dimensions L x W x H approx .: 3500 x 2000 x 2000 mmWith- swiveling control panel- separate control cabinet- hydr. Copier- Thyristor drive- separate hydraulicsWITHOUT the lining shown!used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be plea ...

: 4 St. : 2 St. Plate thickness: 45 mm table length: 2000 mm range L-W-H: 2000 x 700 x 900 mm weight: 152 ca. kg. Furnishing: - brand new workbench - Multiplex worktop 45 mm with surrounding edge - left: 3x drawers - right: 1x drawer, 1x door in COLOR: BLUE / GREEN OR GRAY available! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1000 mm table height (lateral area): 100 mm weight: 351 kg The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Extreme plasma nitrided version with scale - Including 4x basic equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal milling machine / horizontal bed milling machineMake VEB HECKERT type FBEW 630x2000Fabr. -No: 353514, built in 1977Technical specifications:Table size: 2000 x 650 mmTable width: 750 mmMachining length X: 2000 mmMachining length Z: 800 mmConnected load: 24 kWExternal dimensions L x W x H: 5300 x 2250 x 2530 mmControl cabinet: 1000 x 850 x 1800 mmWeight approx: 7.5 twith- retractable quill- separate control cabinet- rapid traverse- Emergency stop switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC universal tool milling machine make STANKO type SMK 25/32Year of construction 1992Travel X: 510 mmTravel Y: 410 mmTravel distance Z: 400 mmSpindle mount DIN 6987 ISA 40Table surface: 800 x 400 mmPiece weight: 400 kgstepless speeds: 20 - 2000 rpm.Quill stroke: 80 mmFeed range: 1 - 3000 mm / minRapid traverse: 5 m / minDrive power: 11 kWOutside dimensions: 2600 x 2150 x 2130 mmWeight approx: 2000 kgWith- Point distance control HEIDENHAIN TNC 135- Chip collecting panused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

plate width: 2870 mm plate depth: 2000 mm plate height: 300 mm weight: 5200 kg 3 identical plate fields available (A2017) LxWxH: 2870 x 2000 x 300mm Area for 3 slab fields: 17.22m² Dimension of the T-slots, 36 x 64 mm - height: 45 mm Weight: KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 2870 mm plate depth: 2000 mm plate height: 300 mm weight: 5200 kg 3 identical plate fields available (A2017) LxWxH: 2870 x 2000 x 300mm Area for 3 slab fields: 17.22m² Dimension of the T-slots, 36 x 64 mm - height: 45 mm Weight: KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC universal milling machine make HERMLE type PF 1000Machine -No: 5235 Year 1981Table size: 1000 x 315 mmLongitudinal movement X: 620/650 mmTransverse movement Y: 430/490 mmVertical movement Z: 400/420 mmSpindle mount DIN 2079: ISA 40Quill extendable: 80 mmminute / Max. Distance spindle / clamping surface: 80 - 500 mmminute / Max. Distance spindle / vertical Guide: 8 - 458 mmPivoting of the spindle head: 360 °12 spindle speeds: 45 - 2000 rpm.stepless feed rates all axes: 4 - 4500 mm / min.Drive power: 4.0 kWWeight approx: 1300 kgExternal dimensions approx. 1500 x 1200 x 2000 mmWith- CNC control Heidenhain TNC 145- Cooling device- side swing-away vertical milling headused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our o ...

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm z-travel: 2000 mm w-axis: 700 mm table load: 10.000 kg Table dimensions: 1600x1800 mm Control: Fanuc 31iMB voltage: 400 V number of spindle speeds: 35-3000 U/min taper ISO: 50 Tool changer: 60 total power requirement: 20/30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 3050 mm turning diameter over slide rest: 2500 mm turning length: 21200 mm Control: Siemens type: 840D turning speeds: 0,236-60 U/min faceplate: 3000 mm main drive motor: 200 kW tailstock quill diameter: 900 mm roll stand: steady: 1200 mm steady: 1200 mm steady: 750 mm steady: 750 mm with live steady: 2000 mm faceplate: 2000 mm Thickness: 330 mm workpiece weight: 200 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Univ. Milling machine make RECKERMANN type Kombi 1000Year of construction 1974Transverse movement of the table: 340 mmVertical movement of the table: 400 mmTable size: 1000 x 400 mmwith 5 T-slots to DIN, width: 18 mmDistance: 70 mmLongitudinal path: 700 mmDistance from spindle nut to lower edge of counterholder: 145 mmHorizontal spindle center to table reach: 0 - 400 mmVertical spindle clearance to table: 0 - 500 mmDistance from vertical spindle center to main stand: 100 - 500 mmSpeeds of the work spindle 16 Dr. Ing. horizontally: 32 - 2800 rpm.16 speeds vertical: 32 - 2800 rpm.Feed rates stepless for all three directionslongitudinal: 15 - 600 mmtransverse: 15 - 600 mmvertical: 6 - 240 mmRapid traverse for all three directions of movement along: 2000 mm / mintransverse: 2000 mm / minvertical: 800 mm / minTotal engine power: 9.6 hpWeight approx. 2700 kgTotal height: 1740 mmused, from oper ...

x-travel: 17700 mm y-travel: 4755 mm z-travel: 800 mm milling width: 3450 mm distance table - vertical milling spindle: 3682 mm table height over floor: 500 mm spindle diameter in front bearing: 200 mm turning speed range: 12 - 450 U/min tool taper: ISO 60 axial adjustment of the spindle slide: 800 mm creep feed: 5 und 50 mm/min feed stepless: 10 - 3000 mm/min cross adjustment of cross beam milling head: 4745 rapid traverse: 2 m/min creep feed: 3 und 30 mm/min feed stepless: 6 - 2000 mm/min rapid traverse: 2 m/min creep feed: 3 und 30 mm/min feed stepless: 6 - 2000 mm/min vertical adjustment of cross beam: 3682 mm rapid traverse: 1,5 m/min creep feed: 1,25 und 12,5 mm/min feed stepless: 5 - 1500 mm/min table-size: 17800x2800 mm column daylight: 3600 mm Control: SIEMENS 840 C table load: 50.000/100.000 kg drive of main spindle: 100 kW total power requirement: 170 kW weight of the machine  ...

pressure: 2000 /1000 t distance between columns: 2650 mm stroke: 500 mm column travel -side: 500 x 1000 mm diameter of piston: 710 mm number of pistons: 2 distance between table / ram: 1000 mm operating pressure: 130 / 230 bar dayligth: 800 mm table length: 2500 mm table width: 1600 mm table height: 250 mm draw back pressure: 500 kN number of T-slots: 8 turning speeds: 1500 U/min rapid speed: 120 - 140 mm/min closing speed: max. 120 - 140 mm/sec. hydraulical ram locking: return of plunger by small single cylinders: 100 - 110 mm/sec cutting sound absorber: 300 t die cushion capacity: 200 t die cushion stroke: 250 mm speed of die cushion: 100 mm/sec voltage: 380 V frequency: 50 Hz quantity of oil: 2000 l total power requirement: 93 kW weight of the machine ca.: 90 t dimensions of the machine ca.: 5000 x 2500 x 7200 mm transport measurements: ca. 6500 x 3750 x 2190 mm 1991 assembly of a di ...

x-travel: 1000 mm y-travel: 500 mm z-travel: 650 mm tool taper: SK 40 quill stroke: 100 mm turning speed range - power take off spindle: 40-2000 U/min Feed: 5-2000 mm/min Rapid movement: 4000 mm/min Control: Heidenhain total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4000 mm y-travel: 2000 mm z-travel: 1300 mm Control: Heindenhain type: TNC530i : table surface area: 5200x2000 mm Table load: 30000 kg pinole diameter: 230 mm number of T-slots: 11 T-slot - width: 28 mm T-slot - distance: 175 mm spindle taper ISO: 50 turning speeds: 40-2000 U/min spindle motor: 30 kW transmission ratio: 4 total power requirement: kW weight of the machine ca.: 70 t dimensions of the machine ca.: 10x5,5x5,8 m Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm z-travel: 2000 mm w-axis: 700 mm table load: 10.000 kg Table dimensions: 1600x1800 mm Control: Fanuc 31iMB voltage: 400 V number of spindle speeds: 35-3000 U/min taper ISO: 50 Tool changer: 60 total power requirement: 20/30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 100 mm x-travel: 2000 mm y-travel: 1200 mm z-travel: 1000 mm w-axis: 500 mm control: Heidenhain type: TNC 155 turning speeds: 20-2000 U/min spindle taper ISO: 50 table surface area: 1100x1300 mm angular milling head: Feed: 0-5000 mm/min Rapid movement: 8000 mm/min workpiece weight: 3000 kg spindle motor: 15 kW total power requirement: 27 kW weight of the machine ca.: 14 t dimensions of the machine ca.: 5,3x2,9x3,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 2870 mm plate depth: 2000 mm plate height: 300 mm weight: 5200 kg 3 identical plate fields available (A2017) LxWxH: 2870 x 2000 x 300mm Area for 3 slab fields: 17.22m² Dimension of the T-slots, 36 x 64 mm - height: 45 mm Weight: KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 5500 mm plate depth: 2000 mm plate height: 300 mm weight: 10000 kg 2 identical plate fields available (A2018) LxWxH: 5000 x 2000 x 300mm Area for 2 slab fields: 22m² Dimension of the T-slots, 36 x 64 mm - height: 45 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 2000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm bed width: 300 mm number of feeds: 42 longitudinal feeds:: 0,031 - 1,7 mm/U face slide travel: 285 mm total power requirement: 5,5 kW weight of the machine ca.: 1,72 t dimensions of the machine ca.: 3,2 x 1,0 x 1,3 m Operating Instructions: englisch + französisch Qick Toolholders: ähnlichch Multifix A comprehensive range of quality centre lathes characterised by wide versatility, high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick chan ...

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000/1500/2000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in:  ...

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000/1500/2000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm bed width: 300 mm number of feeds: 42 longitudinal feeds:: 0,031 - 1,7 mm/U face slide travel: 285 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility, high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout. With variable speed. Hu ...

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Main measure 1: 2000 mm Main measure 2: 300 mm Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 350 mm Width: 150 mm Height: 2000 mm

Type: PL.15.20.4 (presse à planer) with movable cylinder Horizontal movement of portal: 3100 mm Movement of cylinder (left to right): 1800 mm Capacity: 150 ton Max ram adjustment: 400 mm Drawningspeed: 45 mm/sec Workingspeed: 4,8 mm/sec Returningspeed: 69 mm/sec Passage between uprights: 2000 mm Max distance between table - ram: 800 mm Dimensions of the table: 4000 x 2000 mm Tableheight fixed - sliding: 800 mm Electric motor (power): 7,5 HP Length: 4800 mm Depth: 3930 mm Height: 3450 mm Weight: 19,5 ton

In-store oven Miwe Aeromat 4.64 R DUS used in-store oven Miwe Aeromat 4.64 R DUS with fermentation cabinet from 2000 is immediately available for sale in our warehouse in Bielefeld. In-store oven Miwe Aeromat 4.64Caling cabinet - Miwe aero in-store oven - Type: Aeromat 4.64 - digital Miwe DS control - for 4 sheets 60x40cm - with fermentation cabinet - with vapour destroyer - Year of construction 2000 Specifications: 400V / 230V / 50Hz 10.4 kW Dimensions with hood: Height: Width :90cm Depth: 100cm

spindle diameter: 110 mm x-travel: 4000 mm y-travel: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1210014 Type of machine Floortype Boring Machine Make PEGARD Type AF11 Type of control Conventional Spindle diameter 110 mm X-stroke (mm) 4000 Y-stroke (mm) 2000 Z-stroke (mm) 300/750 Table dimensions (mm) 1200 x 1600 mm Table rotation (degrees) 360 Tool Taper Iso 50 Speeds (Rpm) 4 - 1000 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1000 mm table height (lateral area): 200 mm weight: 699 kg The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 28 hole pattern / dimensions 2000 x 1000 x 200 mm - Extreme plasma nitrided version with scale - Including 4x basic equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydr. Shaft straightening machine / shaft straightening press make SAUER & Sohn Dieburg type DR 15/4000 NAStraightening force at 6 bar air pressure: 15 tfor workpiece length up to: 4000 mmWorkpiece diameter: 80 mmWorkpiece cross-section flat max.: 5000 mm2Center shafts max.: 2000 mm2unzentr. Shafts max.: 2000 mm2Stroke of the straightening punch: 30 mmWeight: 800 kgOutside dimensions approx.: 4300 x 700 x 1500 mmWith- a lot of accessoriesused, good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

table length: 2000 mm table width: 2000 mm table load: 25 t table rotating: 360 ° total power requirement: 4 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 3 x 2,9 x 0,9 m Boring mill table Skoda E25A - Boring mill table Skoda E25A - Dead weight: 8,2t - Max. Clamping weight. 25t - First commissioning: 1996 - Decommissioned and stored since 2014 - All axes are electrically controllable and ready for operation - 360° rotary drilling table ready for operation - Dimensions: see data sheet - Heidenhain rotation measuring system with digital display ready for operation - Heidenhain linear measuring system with digital display ready for operation - Boring mill table fully functional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

USED PRECISION GEARS LTD TR-100 BLISTER BACKAGING MACHINE REF.: E0034 PRECISION GEARS LTD blistering machine to blister tablets, capsules, dragees, etc. For PVC / Aluminum blister Model TR-100 Year 2000 Batch marker for incision, pre-cut, cut, Production of 50/60 strokes per minute, depending on the selected blister size, up to 240 blisters per minute. Maximum format size 190x130 mm. Current format blister of 10 capsules of 170x 100 mm General characteristics: Manufactured by PRECISION GEARS LTD Model TR-100 Year built 2000

Machine Details Warehouse number 1105-03446 Machine type machining center - Horizontal Haas brand Type HCE 400 P Year of construction 2000 Control type CNC Haas control system Storage location FRANCE Country of origin Japan Delivery time by arrangement Freight base EXW (Incoterms 2000) Price Technical details x-displacement 560 mm y-way 635 mm z-path 560 mm Haas control system Pallet size 400x400 mm Table load 400 kg Spindle motor 22 kW Spindle speed 8100 1/min Rapid speed 36 m/min Pallet changer type 2-fold rotation Table indexing 360000° ° Tool magazine: 30 x BT 40 Total power requirement 54 kVA Machine weight approx. 8 t Space requirement approx. 2.8 x 5.5 m Accessories Conveyor Information Still very precise horizontal center full B AXIS 30X BT 40 TOOL CHANGER CNC HAAS 2 PALLETS 400 X 400 MM

Boring power: 55 mm dia. of quill: 110 mm throat: 2000 mm workpiece height max.: 1100 mm feed: 0,05-2,5 mm/U surface area: 2000 x 1100 mm spindle turning speed range: 14-1000 U/min : 800 x 500 x 500 mm total power requirement: 11 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 3,9 x 1,5 x 3,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pausch recording workstation Compact CS 2000 with the following device components: Generator Editor Hfe 501 Tube RAD 21 0.6/1.2 Varian Vertical tripod BS 2000 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally railed and with Stretch film wrapped and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full Functionality without guarantee. • The installation and configuration of the system or plant components must be completed by a specialist authorised by the manufacturer or technicians!

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 900 mm Table width: 300 mm Longitudinal travel (X-axis): 700 mm Transversal travel (y axis): 250 mm Vertical travel (z axis): 370 mm Travel of the upper slide: 400 mm Spindle speeds: number (steps): 12 from: 45 rpm up to: 2000 rpm Taper in spindle: 40 ISO Feeds steps:: 12 longitudinal from: 18 mm/min up to: 800 mm/min transversal from: 18 mm/min up to: 800 mm/min vertical from: 7.2 mm/min up to: 320 mm/min Rapid traverse: longitudinal: 2.5 m/min transversal: 2.5 m/min vertical: 1.0 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 6 HP Machine´s weight about: 1900 kg Overall dimensions machine: Length: 2000 mm Width: 1600 mm Height: 1700 mm Various accessories: Digital readout number of axis:: 3