10 BAADER Fish processing machines used machines

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 478 The usefull capacity of the BAADER 36 and 134 herring filleting machine can be increased by a combination with the BAADER 478 automatic feeder wich aligns herring, sprats, sardines and similar fish and feeds them to the processing machine. A variable-speed elevator raises the fish from a water filled hopper and delivers them uniformly to five feed channels. Fish traveling head forward are led directly to the timing device. Fish with tail leading are turned around. The timing device releases single fish synchronized wuth the processing machine and transports them through a back and belly aligning device into the feed troughs of the processing machine. It can be combined with Filleting machine for herring, sardine, Baader 134

HEADING MACHINE, BAADER 421 Technical description: Machine number: 10-4604-0421 Belt width: 300 mm Lift height: 1050 mm Estimated throughput: 35 fishes/min but varying in accordance with fish size and stillness of the operator Water consumption: 12 l/min Weight: 520 kg Dimensions: 2350 x 1600 x 1750 mm

EEL GUTTING MACHINE, BAADER TYPE: 143 Technical description: Serial number: 10-3404-0143 Power supply: 220-380 V, 3 Ph, 50 Hz, 6.5 A, 2.5 kW Clearance: 125 x 110 mm Dimensions: 3000 x 1000 x 1250 mm The BAADER 143 guts eel from 130 to 1200 g, the gutting cut is performed in the usual way. The belly cavity is cleaned by scaper, a suction scoop and a rotating brush, the machine can be adjusted for 3 size ranges. Eel support troughs, scrapers and scoops for the different size ranges can easily be exchanged.

FILLETING MACHINE BAADER TPYE: 184 Technical description: Machine number: 10.3320 0184 Power supply: 380 V, 3 Ph, 50 Hz, 11.5 kW, 22.0 A Plastic conveyor belt width: 500 mm Band width: (2x) 160 mm Throughput: 24-40 pieces/min Water consumption: 25 l/min Weight: 2.500 kg Dimensions: 5400 x 1300 x 1450 mm This machine is laid out for filleting gutted and headed cod, haddock, saithe, hake, merluza and withing from 30 to 70 cm in total lenght (=0.3 to 2.5 kg, gutted including head). Proven BAADER filleting system providing for highest yield and reliability. The BAADER 184 is equipped with an integrated skinning device.

TROUT GUTTING MACHINE BAADER, TIPO: 140 Technical description: Serial number: 74-9019-0140 Power supply: 380 V, 3 Ph, 50 Hz, 7 A Dimensions: 3050 x 550 x 1240 mm This machine is laid out for gutting trouts of a live weight from 240 to 650 g in a commercial manner. The abdominal cavity is cleanly cut open and the guts including the kidney are completely removed by means of a vacuum suction device. The special design of the BAADER 140 is capable of gutting up to 38 fish/min. The gills can either be removed or retained; this requires an easy adaption.

FILLETING MACHINE BAADER 35 (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WITHING (22-40 CM) AND OTHER PELAGICS Technical description: Machine number: 10-1363-0035 Throughput rate: 100-200 pieces/min Voltage/Power: 380 V, 3 Ph, 50 Hz, 11 A Dimensions: 3950 x 2600 x 1550 mm Weight: 835 Kg The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482 or 484. A skinning machine BAADER 55 can be att ...

Baader IS069 Descaling machine Serial: 5306907 2023, Stainless de-scaler, variable speed, up to 100 fish per min, 0.4 - 3Kg, 3.0Kw, overall length 1850mm, mobile, 3Ph

Baader 694 Bone Separator 500kg raw material per hr 3mm drum New belt and new blade, serviced.

Baader 697 Bone Separator Model: 697 Rated at 1200kg raw material per hr 3mm drum Ex butter factory. Supplied with new side hopper Full working order

Baader 580 Fish Filleting Machine x2 units available 2012 & 2004 Regularly serviced and well maintained, ex factory Whitefish

Baader Filleting Line Includes conveyors, header, 588 filleting machine, trimming line, spares, shaprening machine 2021 Full details on request

Baader Fish Filleting Machine Model: 185 Designed for medium-large whitefish Last used on cod/haddock Overhauled in 2020 and little use since

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 488 Technical description: Power supply: 400 V, 50 Hz, 3 Ph Approx dimensions: 3100 x 1400 x 1900 mm It can be combined with Filleting machine for herring, sardine and mackerel Baader 35

FILLETING MACHINE BAADER TYPE: 208 Technical description: Output conveyor width (x2): 108 mm Power supply: 400V / 50 Hz Power: 2,6 kW Dimensions: 3750 x 1050 x 1250 mm This machine processes small gutted and headed hake, small haddock, saithe, cod and whiting. The cuts of the spring-loaded circular knives being controlled by the fish itself, the BAADER 208 produces single fillets with skin of high quality and with best yield. The BAADER 208 is easy to maintain and to operate. All functional areas are very well accessible. The machine is of robust construction and consists mainly of stainless materials so that it has a long service life also when used at sea.

FILLETING MACHINE, BAADER 36 Technical description: Power supply: 400 V/50Hz Dimensions: 3500 X 1000 X 1700 mm - 2300 X 1000 X 1100 mm Can be combined with Automatic feeder BAADER 488 The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483 or 484. A skinning machine BAADER 55 can be attached for the production of skinless herring fillets.

FILLETING MACHINE FOR SARDINE, HERRING, BLUE WHITING, BAADER TYPE: 134 Technical description: Power supply: 380 V, 50 Hz, 12,0 A, 2 kW, 3 Ph Dimensions: 3000 x 2100 x 1200 mm Weight: 450 Kg Can be combined with Automatic feeder for sardine and herring, Baader type: 478 This machine is especially designed for the filleting of small herring and pilchard with an overall lentgh of 15-25 cm (25-125 g), the convenient infeeding procedure and the steplessly adjustable operating speed permit high throughput. Excelent yield is guaranteed by a meat-saving selfadjusting headcut, adjustable tailcut and reliable passage through the filleting tools leading to smoothly cut block-fillets, single fillets without dorsal fins as well as belly cut herring with or without tail fins. Combined with the automatic feeder BAADER 478, the machine becomes an automatic filleting unit operated by only one person fo ...

FILLETING MACHINE BAADER 35 WITH NOBBING SYSTEM (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WHITING (22-40 CM) AND OTHER PELAGICS Technical description: Serail number: 10-1363-0035 Year: 1992 Throughput: 100-200 pieces/min Dimensiones: 3300 x 1250 x 1800 mm The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483, 484 or 488. A skinning machine BAADER 55 can be attached for the produc ...

Used Baader fish fillet machine type 483. Year of manufacture 1993.

see picutre for hours Find more here - / Contact us at -

BAADER SKINNING MACHINE FOR FISH, TYPE 47. ID 2279 Technical description: Machine number: 10-2211-0047 Working width: 205mm Belt width: 195mm Total dimensions: 2200mm x 900mm x 1200mm

Spare parts for smooth cutting head board Baader 424 / 429 (Straight Cut Heading Machine Baader 424 / 429). Almost all spare parts are available in stock or at short notice.

Hole drum 6 mm (drum 3 mm soft) for de-stretching machine Baader 697. New and unused, ready to ship immediately.

Spare parts for raw material shredder Baader 152 (Raw Material Crusher Baader 152). Almost all spare parts are available in stock or at short notice. Alternatively, a new machine can be offered. Please contact us.

SEPARATOR BAADER 696 Technical description: Drum diameter 200mm Includes 1 drum (to choose between different perforation diameters: 1,75mm; 2mm; 3mm; 5mm).

Baader soft separator Type 696 With load With dosing bunker