11 offers ungerer

Category: 107 sheet metal working / Straighteners
Latest update: 22.02.2022 add to watchlist
approved
dealer
Machine: UNGERER 1200/3/17
item-No.: 156896058
used
Seller: country-de Reinhold Schmitt GmbH

revised 2021 material width 1.200 mm material thickness 0,40 - 6.00 mm no. - leveling rolls: 17 leveling roll diameter approx. 34,20 mm length of rolls 1,220 mm distance between stands 1,190 mm total power requirement 11 kW speed 15 m/min. required space approx. 4.10 x 1.10 x 1.90 m machine weight approx. 4.00 t - max. roller distance 20 mm vertically - crowning below - reversible - below support 7-fold with support rolls (individually adjustable) - above support 7-fold with support rolls -circular lubrication of gear shafts and drive shafts - Infeed and outlet table - new drive motor with 11 kW - central grease lubrication of leveling roll bearings - mechanical oil pump for the drive shafts - the drive motor is provisionally connected - no control available - leveler stands on a steel frame leveling test with material is possible.

Category: 107 sheet metal working / Sheet metal blowroom machines
Latest update: 03.08.2022 add to watchlist
approved
dealer
Machine: UNGERER 15/55/9/5/2
item-No.: 41319303
New in: 1950
used
Seller: country-de Kurt Steiger Werkzeugmaschinen GmbH
Location: Wiesbaden

Working width: 1500 mm sheet thickness up to: 2.5 mm number of the straightening rollers: 9 setting rollers Ø: 55 stand continuity: 1505 mm drive motor: 380 V, 700 and 1400 rpm, 5.5 u. 7.5 kW space: 3700 x 1500 x 2100 mm weight: approx. 5000 kg

Category: 107 sheet metal working / Sheet metal blowroom machines
Latest update: 17.08.2022 add to watchlist
approved
dealer
Machine: UNGERER 1500/2,50/9
item-No.: 156328405
used
Seller: country-de

material width: 1500 mm material thickness: 2,50 mm no. of straightening rolls: 9 diam. of the rolls ca.: 55 mm between stands ca.: 1505 mm total power requirement: 7,50 kW weight of the machine ca.: 5,00 t dimensions of the machine ca.: 3,70 x 1,50 x 2,10 m It is possible after an arrangement to make a test on the leveller with material. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107 sheet metal working / Decoilers
Latest update: 22.02.2022 add to watchlist
approved
dealer
Machine: UNGERER HSSHy 1600/490/5,5
item-No.: 125694759
used
Seller: country-de Reinhold Schmitt GmbH

1982/revised in 2006 coil weight 5,50 t mandrel length 1.600 (1.780) mm coil inside diameter 508 mm clamping range 465 - 510 mm height floor to middle of mandrel app. 1.150 mm machine weight approx. 5,5 t accessories: base frame - hydraulically expanding process - hydraulically press arm - hydraulically press roll - motor driven brake disc brake - hydraulically hydraulic not available dimensions (l x w x h): decoiler: app. 3.740 x 1.470 x 1.520 mm base frame: app. 1.760 x 960 x 600 mm

Category: 1300 other machines and plants
Latest update: 25.04.2022 add to watchlist
approved
dealer
Machine: UNGERER RM 300/2/23
item-No.: 158794530
used
Seller: country-de WAHO Werkzeug- und Maschinenhandelsges. mbH

Sheet metal straightening machine make UNGERER type RM 300/2/23Machine -No: 5507 built in 1961Material width: 300 mmMaterial thickness: 2.0 mmNumber of Straightening Rollers: 25Standard roll diameter: 23 mmWeight approx: 2 tExternal dimensions: 200 x 900 x 1700 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Category: 107 sheet metal working / Sheet metal blowroom machines
Latest update: 17.08.2022 add to watchlist
approved
dealer
Machine: UNGERER RM 3000/7,5/9
item-No.: 156328362
New in: 1962
used
Seller: country-de

material width: 3100 mm material thickness: 8,00 mm no. of straightening rolls: 9 diam. of the rolls ca.: 100 mm sheet thickness - min.: 2,00 mm total power requirement: kW weight of the machine ca.: 23 t dimensions of the machine ca.: 5,50 x 2,40 x 1,70 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107 sheet metal working / Cutting-To-Length Lines
Latest update: 08.08.2022 add to watchlist
approved
dealer
item-No.: 150846397
New in: 1966
used
Seller: country-de MET-TECH GMBH
Location: 61381 FRIEDRICHSDORF

Qty. 1 Second-hand cut-to-length line Mfc.: Ungerer Built: 1966 Material: Stainless steel Strip Width: 300 mm- 1500 mm Thickness: 1.5 mm (stainless steel) Cut length: 750 mm- 6000 mm Length adjustment: mechanical Coil weight: 9.000 kg Coil min/max inner Ø: 500 & 600 mm Shear Type: Rotary Hydraulic system Stacker capacity: 2000 ton PLC: Allen Bradley Scope of supply: Decoiler Crop shear Edge trimmer Leveller PVC film applicator Stacker Camera system

Category: 107 sheet metal working / Straighteners
Latest update: 30.05.2022 add to watchlist
approved
dealer
Machine: UNGERER type RA 600/4,5/17
item-No.: 157729987
used
Seller: country-de Reinhold Schmitt GmbH

LEVELER WITH DRIVE material width 400 mm material thickness 0.40 - 4.00 mm number of leveling rolls: 17 leveling roll diameter 68 (69) mm distance between stands 580 mm adjustment: mechanically tilting: mechanically support: 1 x mechanically number of support rolls: 18 (9 x above / 9 x below) support roll diameter: 130 mm pneumatical ventible length measuring roll mounted on frame construction electrical drive power: 20 kW accessories: toggle lever shear as cut to length shear knife length: 680 mm control cabinet control element mounted on frame construction

Category: 107 sheet metal working / Decoilers
Latest update: 17.08.2022 add to watchlist
approved
dealer
Machine: UNGERER
item-No.: 156637729
New in: 1993
used
Seller: country-de

sheet width - max.: 1800 mm coil weight: 10,00 t coil internal dia.: 508 mm coil external diameter: 1800 mm working direction left - right: ja / yes range of expansion ca.: 475 - 515 mm sheet thickness with: Stahl / steel 4 mm sheet thickness with: Aluminium 5 - 6 mm total power requirement: kW weight of the machine ca.: 9,0 t dimensions of the machine ca.: 3,70 x 1,80 x 1,80 m Hydraulic snubber roll arm with hydraulic motor. Shifting movement for coil alignement +- 125 mm electric-hydraulic valves on board. Main Motor: It is installed a DC motor of power 10 kW plus gearbox ratio=1:25 + chain transmission ratio 1:2. Different motor and gearbox can be supplied according to the customer’s line speed. The decoiler is in excellent conditions and we have already checked the mandrel bearings. The snubber roll is new (polyurethane). The data for this ad was created with ModulMWS - the softw ...

Category: 107 sheet metal working / Cutting-To-Length Lines
Latest update: 24.05.2022 add to watchlist
approved
dealer
Machine: UNGERER
item-No.: 152731650
New in: 1980
used
Seller: country-de HEGO Blechverarbeitungsmaschinen GmbH
Location: 76467 Bietigheim

Width max/strip width max.: 1,700 mm Strip thickness min./ strip thickness min.: 1.5 mm Strip thickness max/strip thickness max.: 8.0 mm Coil weight max. / coil weight max.: 20,000kg Coil inner/ coil inner-a: 508 mm Drive / drive: 100 kW

Category: 107 sheet metal working / Cutting-To-Length Lines
Latest update: 24.05.2022 add to watchlist
approved
dealer
Machine: UNGERER
item-No.: 152731637
New in: 2020
used
Seller: country-de HEGO Blechverarbeitungsmaschinen GmbH
Location: 76467 Bietigheim

Bandwidth / strip width min. 300 mm Bandwidth / strip width max. 1,600 mm Band thickness / strip thickness min. 0.4 mm Band thickness / strip thickness max. 2.0 mm Speed / speed 25 m/min Coil weight / coil weight (variant 1) 25 to Coil weight / coil weight (variant 2) 15 to

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE used machinery 25 years online