75 offers tornos

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218211
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 10 mm Max. turning length: with flat cames: 60 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1650 rpm up to: 11680 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4 HP Machine´s weight about: 700 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1500 mm Various accessories: Combined 3-spindle attachment: 13Y

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218256
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 10 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 10 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1200 mm Width: 900 mm Height: 1450 mm Various accessories:

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218222
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 11.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1700 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 800 kg Overall dimensions machine: Length: 1440 mm Width: 900 mm Height: 1600 mm Various accessories: Combined 3-spindle attachment: 13 OA Back drilling attachment: 12 AD Electric control-box Swivelling stop Central lubrification

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218223
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 11.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1700 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 800 kg Overall dimensions machine: Length: 1440 mm Width: 900 mm Height: 1600 mm Various accessories: Back drilling attachment: 12 AD Electric control-box Swivelling stop Central lubrification

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218224
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 11.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1700 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 800 kg Overall dimensions machine: Length: 1440 mm Width: 900 mm Height: 1600 mm Various accessories: Back drilling attachment: 12 AD Electric control-box Swivelling stop Central lubrification

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218270
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 3.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment Electric control-box Speed accelerator

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218258
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 6 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Drilling attachment 12 U Variocam: VNSA Electric control-box Preparation for loader: Barboy Rocker arm with 1/1000 mm

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218259
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 6 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Variocam: VNSA Controlled spindle stop device N Electric control-box Preparation for loader: Barboy Rocker arm with 1/1000 mm

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218226
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 6 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13Y Milling attachment on pos. number: 4 Controlled spindle stop device O Electric control-box Speed accelerator

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218239
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 6 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13 Y Back drilling attachment: 12 AD Pick-up attachment: 34 DA Electric control-box

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218225
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 6 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13Y Electric control-box Speed accelerator

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218143
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13 Y Variocam: VNSA Controlled spindle stop device N

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218144
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13 Y Electric control-box Controlled clutching device

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218145
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13Y Electric control-box Controlled clutching device

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218146
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13 Y Electric control-box Speed accelerator Controlled clutching device

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218160
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment Back drilling attachment Slotting attachment Pick-up attachment 34 DA,

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218161
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13Y Pick-up attachment 34 DA, Controlled clutching device

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218162
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13Y Back drilling attachment: 12AD Milling attachment: 14EA Slotting attachment Pick-up attachment 34 DA,

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218212
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 13 mm Max. turning length:: 70 / 50 with bell cames: 110 / 50 mm Spindle hole: 13.5 mm Number of tool cutters: 5 (8 x 8 mm) Spindle speeds: from: 700 rpm up to: 10000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 1800 kg Overall dimensions machine: Length: 2000 mm Width: 1055 mm Height: 1750 mm Various accessories: Combined 3-spindle attachment: 13Y Controlled spindle stop device O Speed accelerator: VNSA

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218220
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 16.00 mm Max. turning length: with flat cames: 80 mm with bell cames: 150 mm Spindle hole: 17.00 mm Max. treading diameter: 12 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 28 from: 485 rpm up to: 5450 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 1450 kg Overall dimensions machine: Length: 2200 mm Width: 1000 mm Height: 1700 mm Various accessories: 3-spindle drilling attachment: 12 V

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218221
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 16.00 mm Max. turning length: with flat cames: 80 mm with bell cames: 150 mm Spindle hole: 17.00 mm Max. treading diameter: 12 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 28 from: 485 rpm up to: 5450 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 1450 kg Overall dimensions machine: Length: 2200 mm Width: 1000 mm Height: 1700 mm Various accessories: Speed accelerator: VNSA Variocam 3000 Set of loose pulleys 3 spindle front attachment: 12 V

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218081
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 4.00 mm Max. turning length: with flat cames: 28 mm Spindle hole: 6.00 mm Max. treading diameter: 4 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 14 from: 2000 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1300 mm

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218082
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 4.00 mm Max. turning length: with flat cames: 28 mm Spindle hole: 6.00 mm Max. treading diameter: 4 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 14 from: 2000 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1300 mm

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218083
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 4.00 mm Max. turning length: with flat cames: 28 mm Spindle hole: 6.00 mm Max. treading diameter: 4 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 14 from: 2000 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1300 mm

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218084
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 4.00 mm Max. turning length: with flat cames: 28 mm Spindle hole: 6.00 mm Max. treading diameter: 4 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 14 from: 2000 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1300 mm

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218085
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 4.00 mm Max. turning length: with flat cames: 28 mm Spindle hole: 6.00 mm Max. treading diameter: 4 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 14 from: 2000 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1300 mm

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218086
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 4.00 mm Max. turning length: with flat cames: 28 mm Spindle hole: 6.00 mm Max. treading diameter: 4 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 14 from: 2000 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1300 mm

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218087
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 4.00 mm Max. turning length: with flat cames: 28 mm Spindle hole: 6.00 mm Max. treading diameter: 4 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 14 from: 2000 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1300 mm

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218088
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 4.00 mm Max. turning length: with flat cames: 28 mm Spindle hole: 6.00 mm Max. treading diameter: 4 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 14 from: 2000 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1300 mm

Category: 102 lathes
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218089
used
Seller: country-ch Muller Machines SA

Technical data Diameter of work admitted: 4.00 mm Max. turning length: with flat cames: 28 mm Spindle hole: 6.00 mm Max. treading diameter: 4 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 14 from: 2000 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1300 mm

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE used machinery 25 years online