SCHÖN used machine for sale

No. 3421: 1 gebr. Tool press Fabr. SCHÖN, type SH-PZ 250, Bauj. 1979 Arb.-Ber.: Pressure power 250 to mm, drive power: .22 kW Accessories: Table 500 x 500 Other: Single stroke 2-hand Single stroke foot switch automatic continuous running set up and tap

pressure:200 t distance between columns:1050 mm stroke:150 mm distance table/ram, max. stroke up, adjustment up:450 mm table surface area:1000 x 1200 mm table height over floor:850 mm side window:500 mm ram surface:1050 x 870 mm speed down:300 mm/s speed up:300 mm/s working speed:18 - 36 mm/s power requirement:37,0 kW weight:16,0 t dimensions (WxDxH):4,0 x 3,6 x 3,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulisch cutting impact cushioning:hydraulisch foundation pit:nicht erforderlich

Pressure total: 80 ton Stroke: 110 mm Daylight: 450 mm Table surface area : 650 x 520 mm Slide area: 560 x 480 mm Die cushion capacity in table: 20 ton Required power: 18,5 kW Dimensions L x W x H: 2000 x 1200 x 3000 mm Weight of machine approx.: 4,8 ton

pressure:60 t throat:400 mm stroke:600 mm Distance table/ram, stroke up:700 mm Table surface area:1120 x 700 mm table height over floor:850 mm Ram surface:700 x 700 mm Oil volume:275 l Power capacity:7,5 kW Weight:7,3 t Dimensions (WxDxH):1,6 x 2,0 x 3,7 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20

Description: Fabrication number: 2622 Pressing force: 300 kN Connection: 5.5 kW Table dimensions: 600 x 320 mm Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,200 mm, weight approx.: 700 kg

pressure: 100 t throat: 275 mm stroke: 150 mm table surface area: 860x550 mm ram surface: 600x400 mm table height: 810 mm tool hole in ram: Ø 50 mm dayligth: max. 475 mm weight of the machine ca.: 7 t dimensions of the machine ca.: BxTxH 2000x2500x3300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 t distance between columns: 900 mm stroke: 300 mm table surface area: 850x900 mm ram surface: 800x880 mm stroke: 300 mm table height: 1050 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t stroke: 100 mm table surface area: 440x320 mm ram surface: 360x220 mm hole in the table: 160x100 mm table height: 900 mm tool hole in ram: Ø 40 mm dayligth: 280 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: BxTxH 1500x1500x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t distance between columns: 850 mm stroke: 150 mm table surface area: 850x650 mm total power requirement: kW weight of the machine ca.: 7 t dimensions of the machine ca.: 2,5 x 2,5 x 3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t distance between columns: 800 mm stroke: 100 mm dayligth: 450 mm table surface area: 750x750 mm weight of the machine ca.: 3 t dimensions of the machine ca.: 1500x1500x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic Double Column Press Fabr. SCHÖN Type TES 16 tMachine -No: 1838 built in 1977Pressure force: 16 tClamping area: 440 x 320 mmgr. distance clamping surface - ram: 280 mmgr. ram stroke: 100 mmDrive power: 5.5 hpOutside dimensions: 1000 x 1000 x 2000 mmWeight approx .: 1000 kgWith- Sick photoelectric barrierUsed, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic single-column press make SCHÖN type UTE-BCFabr. -No: 1619 built in 1977Max. Press force: 50 tStroke length: 150 mmTable size: 550 x 750 mmDiarrhea opening: 80 mmBear size: 500 x 300 mmOutreach: 280 mmInstallation height: 350 mmPassage width to the rear: 150 mmDrive power: 7.5 hpDimensions L x W x H: 1300 x 1400 x 2400 mmWeight approx. 2000 kgWith- adjustable stoppage time- Blower- Jogging mode- Photocellused, from one operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic four-column press make SCHÖN type NH 300Fabric -No: 3519, built in 1986Press force: 30 tTable dimensions: 800 x 350 x 60 mmBreakthrough diam.: 80 mmStroke adjustable up to: 100 mmMax. Installation height: 300 mmStand width: 850 mmMotor power: 5.5 kWDimensions approx: 1700 x 1000 x 2300 mmWith- Photocell SICKused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

pressure: 40 t distance between columns: 700 mm stroke: 150 mm table surface area: 700x650 mm ram surface: 670x650 mm hole in the table: Ø 120 mm table height: 850 mm weight of the machine ca.: 4 t dimensions of the machine ca.: BxTxH 2000x18000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t distance between columns: 625 mm stroke: 150 mm table surface area: 580x450 mm ram surface: 580x340 mm hole in the table: Ø 150 mm table height: 850 mm tool hole in ram: Ø 45 mm column travel -side: 200x200 mm weight of the machine ca.: ca. 6,0 t dimensions of the machine ca.: BxTxH ca. 1300x1300x2750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t distance between columns: 500 mm stroke: 150 mm ram surface: 320 mm table surface area: 470x400 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t distance between columns: 850 mm stroke: 400 mm ram surface: 800x700 mm : 300 mm pressure of ejector: 20 t table surface area: 800x700 mm total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 1800x1800x4200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t throat: 250 mm stroke: 100 mm ram surface: 500x400 mm hole in the table: Ø 110 mm table height: 850 mm tool hole in ram: Ø 40 mm ram surface: Ø 150 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1500x2000x2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t stroke: 150 mm table surface area: 850x650 mm ram surface: 730x560 mm weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 2000x2500x3600mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.