18 offers mb

Category: 832 post press: folders
Latest update: 18.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 53617
New in: 1996
used
Seller: country-de Vogel Industrievertretungen GmbH
Location: Hessen

4 + 4 bags Sniffer Output Available: Immediately

Category: 832 post press: folders
Latest update: 05.12.2022 add to watchlist
ankerimg
item-No.: 156879928
New in: 1998
used
TOP Seller: country-de Steenholdt GmbH
Location: Lager

buckles: 4 pcs knives: 0 pcs max. paper size: 52 x 85 cm serial no.: 98979071 speed: 200 m/min voltage: 3 x 400 V frequency: 50 Hz dimensions: 3 x 1m + 1,80 x 1 m fold depth max. 46,5 cm paper grammage 40-250 g/m² full size 10 x 12 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 305 peripheral equipment (e.g. heating,cooling,drying)
Latest update: 05.09.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159757278
New in: 1996
used
Seller: country-it 01machinery s.r.l.

Description Ladder Tape Type of carpet: smooth with strips Belt length: 2000 + 900 mm Net Width: 420 mm Minimum Belt Height: 850 mm Maximum Belt Height: 1100 mm Height of strips: 30 mm Passto laths: 390 mm Length of battens: 400 mm

Category: 818 presses: other
Latest update: 04.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 155251555
used
Seller: country-de F1-TRADE GmbH
Location: On Stock Emskirchen / Nürnberg

Folding machine MB multipli-cas 524 Serial-No. 78261 - Year - -We would be very pleased with your visit - more machines on Stock- -Available Immediately- -Can be inspect- -On Stock Emskirchen / Nürnberg - Can be test-

Category: 832 post press: folders
Latest update: 30.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160337609
used
Seller: country-ch MJS-LINE GmbH

FOLDING MACHINE MULTIPLI 35 WITH STAND Format (mm): max. 297 x 420 // min. 105 x 148 Pockets: 2 Folding arts : Letter fold, zigzag fold, double parallel, single fold

Category: 832 post press: folders
Latest update: 05.10.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158972917
New in: 1999
used
Seller: country-ch MJS-LINE GmbH

M. No.: 99051725 Format (cm): 35x45 Equipment / Additional information: Pockets: 2 Fold types: spiral fold, zigzag fold, double parallel fold, single fold Underfloor suction feeder: 30 000 bph Friction feeder: 20,000 sheets / h with parallel fold A4, 80 g / m2 Paper weight: 40 - 250 g / m2 with simple parallel fold Electrical connection values: Mains voltage: 230V Current consumption: max.IOA

Category: 204 grinding machines
Latest update: 05.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156795817
new
Seller: country-de Gebr. Engelfried oHG
Location: ab Werk

Number of sanding units: 2 St. sanding width: 100,150 mm Sanding height max.: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 503 shredders / Woodchoppers
Latest update: 10.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158698135
New in: 2022
new
Seller: country-at Wilhelm Freudlinger Werkzeuge und Maschinen
Location: 4924 Waldzell

Residual wood tensioner LL 1000 HS Motor power: 18.5 - 22.5 kW Motor power hydraulics: 1.75 kW Hydraulic cylinder: 700 mm stroke Number of tools: 40 pcs. Rotor speed: 120 rpm. Dimensions: L 2,650 x W 1,600 x H 1,760 mm Weight approx.: 1.950 kg Wood chip size - sieve dependent: Standard screens Ø: 17.5/ 20 / 22/ 25 mm Special screens Ø: 12/ 15/ 30 mm

Category: 503 shredders / Woodchoppers
Latest update: 10.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158698138
New in: 2022
new
Seller: country-at Wilhelm Freudlinger Werkzeuge und Maschinen
Location: 4924 Waldzell

Residual wood tensioner LL 1200 HS Motor power: 37 - 55 kW Engine power hydraulics: 4.4 kW Hydraulic cylinder: 2 x 1,300 mm stroke Number of tools: 48 pcs. Rotor speed: 120 rpm. Dimensions: L 3,950 x W 1,800 x H 1,950 mm Weight approx.: 2.850 kg Wood chip size - sieve dependent: Standard screens Ø: 17.5/ 20 / 22/ 25 mm Special screens Ø: 12/ 15/ 30 mm

Category: 503 shredders / Woodchoppers
Latest update: 10.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158698132
New in: 2022
new
Seller: country-at Wilhelm Freudlinger Werkzeuge und Maschinen
Location: 4924 Waldzell

Residual wood tensioner LL 600 Motor power: 11 or 15 kW Rotor speed: 570 rpm. Rotor Ø: 280 mm Cutting tools: 34 pcs. Cutting unit width: 600 mm Throughput: 0.6 - 1.7 m³/h Suction nozzle: 200 x 200 mm Weight approx.: 920 kg Dimensions: L 1,150 x W 1,130 x H 1,920 mm Wood chip size - sieve dependent: Standard screens Ø: 17.5/ 20 / 22/ 25 mm Special screens Ø: 12/ 15/ 30 mm

Category: 503 shredders / Woodchoppers
Latest update: 10.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158698133
New in: 2022
new
Seller: country-at Wilhelm Freudlinger Werkzeuge und Maschinen
Location: 4924 Waldzell

Residual wood tensioner LL 800 HSDN Motor power: 18.5 - 22.5 kW Motor power hydraulics: 1.75 kW Hydraulic cylinder: 700 mm stroke Hopper capacity: 1,0 m³ Feed opening: 800 x 1,260 mm Number of tools: 32 pcs. Rotor speed: 120 rpm. Dimensions: L 2,650 x W 1,400 x H 1,760 mm Weight approx.: 1.800 kg Wood chip size - sieve dependent: Standard screens Ø: 17.5/ 20 / 22/ 25 mm Special screens Ø: 12/ 15/ 30 mm

Category: 832 post press: folders
Latest update: 05.10.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158219366
New in: 2010
used
Seller: country-ch MJS-LINE GmbH

Ser. No.: 0001784PBA12 Pockets : 4 max. sheet format: 38 x 65 cm Minimum sheet format: 7 x 12 cm Minimum fold length: 3.5 cm Paper weight: 40-250 g/m2 Speed: max. 220 m/min DELIVERY BELT AM38NET

Category: 818 presses: other
Latest update: 04.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 155251668
New in: 1982
used
Seller: country-de F1-TRADE GmbH
Location: On Stock Emskirchen / Nürnberg

Spare Part for Multipli 382 MB Year - - Serial-No. - 2 folding buckles for MB 382 Band delivery for MB 382 -We would be very pleased with your visit - more machines on Stock- -Available Immediately- -Can be inspect-

Category: 108 welding machines
Latest update: 05.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156797338
new
Seller: country-de A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus

table diameter: 340 mm table load: 160 horizontal kg. table load: 100 vertikal kg. turning speeds: 0,6 - 6,0 U/min swivelling range: 0 - 90 Grad bore: 60,0 mm motor: 230 Volt weight of the machine ca.: 56 kg. range L-W-H: 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating in ...

Category: 108 welding machines
Latest update: 05.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156797253
new
Seller: country-de A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus

table diameter: 340 mm table load: 290 horizontal kg table load capacity: 190 vertikal kg turning speeds: 0,6 - 6,0 U/min spindle bore: 60,0 mm swivelling range: 0 - 90 Grad weight of the machine ca.: 62 kg dimensions of the machine ca.: 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions ...

Category: 108 welding machines / Welding Turntables
Latest update: 05.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156797520
new
Seller: country-de A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus

table diameter: 500 mm table load: 300 horizontal kg. table load: 150 vertikal kg. swivelling range: 0 - 90 Grad turning speeds: 0,2 - 2,5 U/min bore: 90,0 mm table height: ~ 650 mm mm motor: 230 Volt weight of the machine ca.: 90,0 kg. range L-W-H: 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 108 welding machines / Welding Turntables
Latest update: 05.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156797341
new
Seller: country-de A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus

table diameter: 900 mm table load: 1.000 kg turning speeds: 0,12 - 1,2 U/min swivelling range: 0 - 135 Grad speed: Kipp 0,35 U/min welding current: 500 A dimensions of the machine ca.: 1475 x 1050 x 900 mm For heavy industry When choosing a turntable, it is essential Turning and tilting torque must be taken into account. To note applies to how far the center of gravity of the workpiece is from the The faceplate is away or how far the center of gravity is is eccentric from the center. By means of a Rotary and tilting tables can be used to optimize workpieces position for welding. - Robust construction. - Infinitely variable. - Hand remote control. - HF protected. Furnishing : - 1 control (integrated) - 1 wired remote control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 108 welding machines
Latest update: 05.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156797505
new
Seller: country-de A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus

total power requirement: 230 Volt table diameter: 300 mm table load: 100 Horizontal kg swivelling range: 0 - 90 Grad turning speeds: 0,2 - 2,0 U/min turning speeds: 1,2 - 12,0 U/min bore: 20,0 mm weight of the machine ca.: 50 kg dimensions of the machine ca.: 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The devices control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch The data for this ad was created with ModulMWS - the software  ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE used machinery 25 years online