7 offers kuhne

Category: 302 extruders / Blown film lines
Latest update: 03.06.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 151741733
New in: 1986
used
Seller: country-de Remax Kunststofftechnik

according to pdf attached

Category: 302 extruders / Coextrusion plants
Latest update: 08.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 146688264
New in: 2006
used
Seller: country-de ANT Maschinenhandel UG
Location: 10707 Berlin

Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg MAIN EXTRUSION UNIT To ...

Category: 302 extruders / Blown film lines
Latest update: 30.05.2022 add to watchlist
ankerimg
item-No.: 148552155
New in: 1989
used
Seller: country-de Auch Folien + Technik e. Kfm

Mono-blown film lin in good working condition, for processing LD and LLD-PE, film width max. 1,600 mm. Extruder screw 70 mm l/d 24, die diameter 250 mm and 300 mm, gap 0.9 mm and 1,2 mm, corona treatment, wrapper 1,600 mm working width. Auch Folien + Technik e. Kfm. D-73773 Aichwald phone +49 1577 5329827.

Category: 302 extruders / Blown film lines
Latest update: 05.05.2022 add to watchlist
ankerimg
item-No.: 148552153
New in: 1986
used
Seller: country-de Auch Folien + Technik e. Kfm

Mono-blown-film line in working good condition, for processing LD and LLD-PE, film width max. 1,600 mm. Extruder screw 70 mm ld 24, die diameter 250 mm and 300 mm, gap 0.9 mm and 1.2 mm, corona treatment, winder 1,600 mm working width. Auch Folien + Technik e. Kfm. D-73773 Aichwald phone +49 1577 5329827.

Category: 302 extruders / Blown film lines
Latest update: 27.07.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 152855137
used
Seller: country-de Packmaschinen Werner Zumbrock e.Kfm.
Location: 59071 Hamm

Monoextruder for HDPE / LDPE films Layers = 1, Film width max. = 1600 mm Thickness range = 0.020 - 0.20 mm Extruder stationary type = 70/24D Output 250 kg/h Nozzle = 250 / 300 mm Blow head gap width = 0.9 / 1.2 mm 1 Tandem Winder Accessories = Corona , Needle Perforation

Category: 302 extruders / Single screw-type extruding machine
Latest update: 08.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 157313578
New in: 2012
used
Seller: country-de MEB Maschinenhandel GmbH
Location: Westdeutschland

screw ø:: 60 mm screw length:: 33D screw speedl:: -- U/min drive power:: 55 kW condition: used - Specification: Plastic extruder type EXTREX 45GP K60E-33D with melt pump make MAAG for compounding plastics - with Maag melt pump type EX 45-5 GP E - Screw extension: to the rear - Screw diameter: 60 mm - Screw length: 33D - Degassing opening: 13D from the front - Screw design: for PP - Processing of PP and PA products without sensing elements - Heating capacity: 8,4 kW - Flange heating: 1,6 kW - Heating zones: 5 pieces - Cooling zones: 5 pieces - Motor power: 55 kW - Extruder capacity approx.: min. 150 Kg, - Material: PP-MVI70 MAAG melting pump: - Type: EX 45-5 GP E - Specific delivery volume: 46.3 cm³/rev. Wide slot nozzle: - Slot width: 600 mm Visualisation: KEC-PC - in connection with Siemens control S7-300 an ...

Category: 302 extruders / Double screw-type extruding machine
Latest update: 08.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156340672
New in: 1998
used
Seller: country-de MEB Maschinenhandel GmbH
Location: Süddeutschland

screw ø:: 70 mm screw length:: 24D screw speedl:: -- U/min drive power:: 70 kW condition: used - Specification: Plastic extruder type K70-24D with melting pump and suction conveyor - with Maag melting pump and suction conveyor - Screw diameter: 70 mm - Screw length approx.: 1,680 mm - Length of the snail: 24D - Motor power: 70 kW - Snail geometry: classic polyphine screw, which is designed as a barrier screw. This means with shear and mixing section. - Output approx.: 120 Kg, PP standard - Dimensions W/D/H approx.: 4,000 x 1,200 x 2250 mm Package two approx.: 1,200 x 800 x 1,100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE used machinery 25 years online