KRUPP used machine for sale

Abgel. Running hours 7826 hrs., AMNERKUNG: Vehicle is not road legal!

Cone crusher Krupp Brand: Krupp Type: 91-20 Year of construction: 1999 Incl.: electric motor, hydraulic system, electric control and new wear parts. Type: 90-8 Year of construction: 2000 Incl.: electric motor, hydraulic system, electric control and new wear parts.

Screening machine KRUPP 21/55-2 Brand: Krupp Screen area: 5500 x 2100 mm - 2 deckers Upper deck: [] 35mm Lower deck: [] 16 x 3mm Propulsion: 22 kW Incl.: springs and spring console In stock: 2 pieces

Stationary crane with pulverizer Brand pulverizer: KRUPP Electric water propulsion

Gebr. Mixing plant / tower plant Fabr. Krupp, control company Dorner, 1 x mixer THZ 3000 Teka, 1 x mixer THZ 1000 Teka, with 4 cement silos, hot water supply via biomass heating possible, aggregate storage in the tower, Feeding via elevator/vibrating chute and distribution belts, recycling plant with two separate agitator basins

TECHNICAL SPECIFICATIONS Manufacturer: KRUPP / KLEEMANN REINER Designation: Impact crushing plant and screening unit Design: semimobile, screw construction Year of construction: 1996 Complete treatment plant consisting of: Item 01) FEED BUNKER Bunker capacity: approx. 6 cbm Bunker insertion width (side): 4,270 mm Bunker insertion height: 6,800 mm Hopper elevation: 500 mm Item 02) BUNKER VENT Type: FUF 1200-250x3500 Usable width: 1,200 mm Length: 3,500 mm Installation inclination: horizontal Drive power: 2 x 3.5 kW Item 03) CIRCULAR VIBRATING SIEVE Type: Turbo 1.4 x 1.8 - 2D Screen version: Two-decker Screen width: 1,400 mm Screen length: 1,900 mm Total length: 2,200 mm Drive power: 11 kW Item 04) HAND-HELD STATION - Between feed hopper and impact crusher - Conveyor belt with access on both sides - Enclosed and protected from the weather Item 05) ...

TECHNICAL SPECIFICATIONS Manufacturer: THYSSEN KRUPP Fördertechnick Description: Chain conveyor, scraper conveyor Type: OTK 440/1200x9408 Design: stationary, heavy version Year of construction: 2001 Drive type: slip-on geared motor, planetary gear Drive power: 55 kW Length chain conveyor: 9,400 mm Chain conveyor width: 1,200 mm

one batch of clutches (unused) Brand : Krupp Diameter from 200mm to 800mm. Dead. Weight about 25-30 tons

Electric magnet block. Brand: Krupp. Block : L= 1650 x W=1200 x H=600 mm. Power requirement block = 7 kW, 35 Amp. Weight about 3.5 – 4 tons. Included rectifiers (new).

Krupp Electric Magnetic Belt, heavy duty Block : L= 1650 x W=1200 x H=600 mm Power requirement block = 7.7 kW Power requirement drum motor = 5.5 kW Belt width : 1400 mm - A.A. 3200 mm Speed : 2.5 Mtr./sec. Included rectifiers (new) Weight approx. 7500 kg Stock 3 pieces

Screening machine KRUPP / Hazemag Brand: Krupp / Hazemag Type: CK 803 Screen area: 5600 x 1550 mm - 3 deckers Incl.: electric motor and steel construction.

Screening machine KRUPP 16/70-2 Brand: Krupp Type: DU 14 Screen area: 7000 x 1600 mm - 2 deckers Incl.: 30 kW electric motor and springs

Various spare parts for Krupp impact splitter N90. Except for the roto plate, all are unused new parts

a good blanking press Krupp Model PEKRD 250h, 250 tons, year 1980/2005, overhauled 2005, with infinitely variable drive system and Siemens S7 controls, feed system for material 0.5-6 mm, 500mm wide. With decoiler 6 tons. Built as a double-sided C-frame press so that in- and outfeed front-to-back is possible

MECHANICAL PRESS KRUPP 1000 TONS Model: PDqV 4-1000 Condition: Very good, complete, dismantled Technical details: Force: 1000T Strokes per min. 8-30 The stroke 400 mm Shut height (SDAU) 1300 mm Slide the adjustment 300 mm Slide the dimensions 4200 x 2000 mm Bed size dimensions 4200 x 2000 mm Frontal opening 4300mm Lateral window 2600 x 1400 mm

hydraulic concrete steel Benders Krupp Futura B 703 steel bending machine with accessories and complete instructions Tech. Data performance table - steel 50-55 kp/mm2 Diameter 22 mm - 6 bars per bending, 28 mm-4, 32 mm 3,. Mtfgtw 50 mm 2 speed 4-12 / min Operation - with control or manual, operating dial - HAND - machine with possibility of 3 bending angle set - every page - 3 links + 3 right complete documentation, operating instructions much accessories more info upon request You can edit, flat, round steel accessories - various bending rollers, bolts, reducing roll, Overarm and the machine has device for Pipes. Bulk 2.3 x 1 x 1 m, Btto 1500 kg

Transfer press KRUPP PST-A 160 built in 1980. Technical data of the KRUPP PST-A 160 press: - nominal pressure: 160 tons - cutting force grade 1: 400 KN - force between stands: 1200 KN - number of working steps including cutting stage: 11 - distance between stands: 200 mm - slider stroke: 210 mm - drawing depth: 70 mm - range of jumps, infinitely adjustable: 15-75 / min. - production range of jumps with repeatability of its setting: 25-75 / min. - number of actuation movements: 15-25 / min. - a usable work resource for a jump in the range of 25-75 strokes per minute. : 20,000 J - maximum load on a single step: 500 KN - maximum load of a single step using inserts: 630 KN - maximum width of the tape: approx. 340 mm - maximum diameter of the cut: 120 mm - minimum diameter of the pattern: 30 mm - distance between stands: 2450 mm - height of tool building at the lower posi ...

CAP.: 10 000 BTLS/H OF 1.5 L,

Type: 6B R1. Beading machine for edges from 20-100 mm (diameter). Workpiece height: Max. 50 mm, plate thickness: Max. 0,5 mm.

Type: 6B R1, beading for bearings of 20-100 mm diameter. Workpiece height: Max. 50 mm, Sheet thickness: Max. 0.5 mm.

Motor power: 90kW, with control cabinet, the vertical crusher is located in an enclosure.

PRESS DESIGN   drive system: eccentric / crank   openings in uprights: yes   feedstock transport direction: right to left PRESS FORCES   total force (nominal): 315 to   nominal work capacity: 45 kNm PRESS TABLE   table surface (left-right): 2250 mm   table surface (front-back): 1100 mm   thickness of bolster plate: 150 mm   height above floor level: 1000 mm SLIDE   slide force: 315 to   table surface (left-right): 2250 mm   table surface (front-back): 880 mm   stroke: 210 mm   stroke rate (max.): 80 /min SLIDE (MECHAN. PRESS)   slide adjustment: 120 mm   stroke rate (min.): 25 /min   stroke rate (max.): 80 /min   main drive power: 60 kW SLIDE EJECTOR / CUSHION   working principle: pneumatical  & ...

Wire electrode, welding wire, welding wire, cored wire -Manufacturer: Krupp, protective gas wire electrode CrNi 19 9 -Type: NOVONIT 4316 O 0.8 mm -Dimension: O 300/100 mm -Total weight: 15.4 kg

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head -Adjustment: SK50 -min. Bore diameter: 100 mm -Max. Bore diameter: 120 mm -Suitcase -Dimensions: 350/170/H135 mm -Weight: 12 kg

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head -Adjustment: SK50 -min. Bore diameter: 95 mm -Max. Bore diameter: 115 mm -Suitcase -Dimensions: 400/170/H140 mm -Weight: 12 kg

Krupp Kautex Blowmoulding Machine Mono layer Double head One station Machine has been fully revised mechanically and also PLC revision in 2008 Machine is in working condition

number of controlled axis: . workpiece weight: . kg throat: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m 2 piecesThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Single stand - eccentric press KRUPP type PEKRD 125 h Masch. No. 2861 Year of construction 1977 Compressive force 125 ton. Projection 400 mm Table size 950 x 750 mm Ram surface 800 x 540 mm Table opening 100 x 250 mm Stroke adjustment 8 to 160 mm Ram adjustment 100 mm Installation height largest stroke top max. 550 mm Number of strokes 60 strokes/min. Table height above corridor 800 mm Motor power 10 kW Mains connection 380 Volt, 50 Hz - Hydraulic overload in the tappet - Compressed air Clutch-brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram position - Table top with ball rollers - Two-hand operation - Grease central lubrication HELIOS- Stroke counter - UVV 7n 5.1 §4a, paragraph 2 No. 3b for manual insertion work Space requirement L x W x H 2300 x 1800 x 3200 mm Weight approx. 10 tons. good condition (very little used); used

Water-cooled MIG-MAG welding machine Make F. KRUPP Type CW 351 / CW 354 BW / FS II Construction Masch. -No: 4745 Federal utility modelPower range: 30 - 350 AED at 295 A: 100%ED at 350 A: 70%With- sep. wire feed- hose package- Recooling devicevery little usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manufacturer: Krupp - Type: 4 - Inlet size: 630 x 355 mm - With Electrical motor