KALTENBACH used machine for sale

Key data: 750 mm, 220 mm

Cutting area: dia. 220mm, U/I beam : 400 x 150 , feed rate: 0- 500mm/min , drive motor: 5hp, 1700kg, sgt. Condition.

Specifications: - Saw blade diameter up to 400 mm - Cutting range at 90° approx. 130 mm - Square 120 mm - Rectangle 300 x 40 mm - or 240 x 85 mm - at 45° around 130 mm - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds + 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. infinitely variable - Hydr . Metal tension - Coolant device - Feed – discharge roller conveyor each approx. 3000 mm - Space requirement approx. W 800 x H 1850 x D 1100 mm - Weight approx. 850 kg

Specifications: - Max. working width 2040 mm - max. material thickness at 40 kg / mm², strength 4 mm - Bending angle adjustment pre-selectable 0 - 135 ° - Maximum opening width / stroke of the upper beam 350 mm - Height adjustability - bending beam 100 mm - the lower beam 100 mm - Upper beam drive 400 V / 4 kW - Bending beam drive 400 V / 4 kW - Space requirement approx. W 3200 x H 1650 x D 1500 mm - Weight approx. 3900 kg

Specifications: - Saw blade diameter up to 400 mm - Cutting range at 90° approx. 130 mm - Square 120 mm - Rectangle 300 x 40 mm - or 240 x 85 mm - at 45° around 130 mm - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. infinitely variable - Coolant device - Material replenishment machine ( clamping arm can be folded away ) - Space requirement approx. W 2400 x H 1850 x D 1100 mm - Weight approx. 1250 kg

Offer 20507 Specifications: - Saw blade dimensions 350 x 3.2 x 40 mm - Saw blade speed 3200 rpm - Cutting range at 90° 115 mm - 115 x 120 mm - 200 x 80 mm - Mitre adjustable left + right - Drive 400 V / 2.0 kW - Pneumatic connection 6 bar - Space requirement approx. W 700 x H 1500 x D 900 mm - Weight machine approx. 80 kg - with: - Saw blade - Clamping vice - Micro spray lubricant device - Stop rail 3000 mm

KALTENBACH KKS 400 NA automatic circular sawing machine built in Germany is used for the precise, fully automatic cutting of flat bars, angle bars, profiles and tubes. The machine uses a reliable drive with hardened and ground helical gears, which, in combination with the electronic cutting height adjustment and the fast reverse movement of the cutting disc, ensures smooth operation and short cutting times, even during the most demanding processing. A large workspace with a clamping element stiffens the material during cutting, ensuring that the workpiece is held firmly and securely on both sides of the 400 mm diameter blade. The KALTENBACH circular sawing machine is offered with, among others, a material feeder, chip conveyor and convenient to use PLC control. Technical data of the KALTENBACH KKS 400 NA circular sawing machine - PLC control - machinable materials: steel, stainless ...

Length 5000mm Web width 395mm

Max. saw blade diameter: 350 mm Manual material tensioner Minimum Quantity Spraying

Auto. Attack Roller conveyor 4000 mm, right

Cold Circular Saw Circular Saw Metal Saw with Roller Conveyor Kaltenbach KKS 400 E Location of the machine: 76661 Philippsburg The machine can be viewed on site. It works perfectly. You can arrange a viewing appointment at any time. We'd love to hear from you.

Saw blade diameter: 400 mm Sawing capacity: 130 mm round / 120 x 120 mm square Saw adjustment: 45º left/right Saw steps: 13/17/25 mtr. per min. Main engine power: 2.7 kW Country of origin: Germany Machine weight: 900 kg Machine LxWxH: 1080 x 900 x 1760 mm

Saw blade diameter: 400 mm Connection: 400 V Equipment: - 2 sawing units - Pneumatic vice

offer 22543 Specifications: - Saw blade dimensions 350 x 3.2 x 40 mm - Saw blade speed 3200 rpm - Cutting range at 90° 115 mm - 115 x 120 mm - 200 x 80 mm - Miter adjustable left + right - Drive 400 V / 2.0 kW - Space requirement approx. W 700 x H 1500 x D 900 mm - Weight machine approx. 80 kg - with: - Saw blade - Clamping pole - Stop rail 3000 mm

Manually adjustable length stop, 4000 mm (mounting right)

Length measuring system L-40NC suitable for Kaltenbach circular saw KKS 450 (please request KKS 450 separately) Directly from the customer used from CH-Oberrohrdorf available.

Specifications Roller conveyor 4000 mm Roll width 300 mm Rolls Ø 30 mm Number of rolls 16 Support feet 2 elements à 2m

Kaltenbach circular saw KKS 450 with length measuring system L-40NC Specifications Type: Kaltenbach Length measuring system: L-40NC Year of construction: 2005 Type circular saw: KKS 450 H Year of construction: 1998 Saw blade: Ø 450mm / holder Ø50mm Working range max (90°) 150mm Working range square (90°) 140x140mm Working range flat steel (90°) 330x40mm Working range U-steel standing (90°) 120x55mm Working range round (90°) Ø 150mm Miter range 0° - 90° 0° Dimensions: LxWxH 1110x1020x2000mm Weight: approx. 950kg Description: Used, hydraulic universal saw machine in semi-automatic design with rotary table for miter cuts: - Clamping, sawing, returning, opening – simply at the push of a button - Adjustment of the cutting height via push buttons - User-friendly electronic control directly on the machine - Good accessibility for saw blade changes and ...

YOC 1994 Saw blade diameter (mm): 400 Cutting speeds (m/min): 13/26, 10/20,15/30 Engine power (kW) 1.7 /2.6 Working range approx. 90° / 45°: 130 Working range square 90° / 45°: 120 / 110 Working range flat steel 90° / 45°: 305X 40 / 245 x 30 Working range standing 90° / 45°: 120 X 55 Dimensions LxWxH (mm): 800 x 1070 x 1780 Weight (kg): 820 Work carried out: Replaced cable to motor, cooling water pump, and limit switch in the engine room Feed cylinder newly sealed Transmission oil replaced Hydraulic tank cleaned / oil and filter replaced Limit switch in the machine room replaced Other settings made

Used cold circular saw Internal machine number m3331 Manufacturer Kaltenbach Type TL 500 Ma.Number 14238 Year of construction unknown Weight: approx. 350 kg Item location: 58730 Fröndenberg/Ruhr The machine can be visited and tried out under power. We will be happy to send you further photos by e-mail. A forklift/crane for loading is available. Prior sale is reserved. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as e.B. technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with transfer of risk to the buyer, this also applies to a shipment on our part, which we have carried out ...

Saw blade Ø: 400 mm Cutting range at 90° round: 130 mm Cutting range at 90° rectangle: 305 x 40 mm Cutting range in miter at 45° round: 130 mm Cutting area in miter at 45° rectangle: 245 x 40 mm Cutting speed: 10/20 m/min Drive motor: 380 V, 1.7/2.6 kW Space requirement: 1100 x 1000 x 1900 mm Weight: 700 kg

Machine type: Aluminum circular saw machine Manufacturer: KALTENBACH Model: TL 200 Condition: good Offer type: used machine Specifications: Cutting range: Ø 55 mm, Leaf Ø: 200 mm Drive type: el./mech. Drive: 0,75 kW, 400 V Remark: portable Weight: 50 kg The machine is in a good and immediately ready for use condition and can be visited and demonstrated with us. We would be pleased if our offer finds your interest. Errors, changes and prior sale excepted.

Kaltenbach Type RKT 760 Year of construction 1998 Saw blade diameter up to 760 mm Cutting area around 245 mm Square saw area 300 x 30 mm Drive 3/5 kw Working area profile standing 400 x 155/340 x 137/280 x 119/220 x 98 mm Working area U profile standing 380 x 102/300 x 100/220 x 80 mm Cutting speed 22/111 m / min Saw blade feed continuously 0 - 1200 mm / min 6 m inlet roller conveyor 6 m run of roller conveyor 6 m length stop Miter device

material dimensions max. round: ​Ø 380 mm max. square: 380 x 380 mm segment length with single stroke: 10 - 510 mm with multi stroke: max. 4590 mm dimensions LxWxH: 3100 x 2200 x 1850 mm weight: 3.100 kg

Code 96380 UMSCHREIBUNG Volautomatische Kaltkreissäge Fabrikat Kaltenbach Model KKS 400 NA Machine Nummer 1700 - 03004 Baujahr 1982 Rechtwinkeler Schnitt Rund à 90º 130 mm Viereckig à 90º 315 x 50 mm U-profiel à 90º 24 x 85 mm Sägeblatt Durchmesser..………………… 400 mm Sägeblatt in Graden verstellbar 0 – 180 º Drehzahlen 10 – 14 – 20 UpM Hauptmotor Leistung…………………… 0,9 – 1,2 – 1,8 PS Anschluss spannung……………………. 380 Volts Zubehör Lademagazin Automatische laden bis 1700 mm Maschine Maschine ist in gutem Zustand

specifications: - Saw blade diameter up to 400 mm - Cutting range at saw blade diameter 400 mm - at 90° around 130 mm - square 120 mm - flat up to 260 x 60 mm - Miter adjustment left + right 0 - 90 ° - Cutting speed 1750 / 3500 m/min - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min - Saw drive 400 V / 3.7 / 4.4 kW - 2 pcs Pneum. Material clamping sticks with adjustable clamping pressure - Space requirement approx. W 1200 x H 1900 x D 1200 mm - Weight approx. 600 kg

- Cutting speed: 6 - 30 m/min - Saw blade dimensions: 400 (425) x 50 x 5 mm - Cutting range 45° flat: 180 x 40 mm - Cutting range 90° flat: 240 x 70 mm - Cutting range 90° round: 140 mm - Cutting range 90° square: 130 mm - Miter cut: infinitely variable 60 -/+ degrees - Saw blade feed speed: 0 - 1,200 mm/min - Minimum quantity lubricating system: PPS 401 115326 - Autom. Flat magazine FMA for rods: 1500 - 7000 mm - Control: Kaltenbach MULTI-COM - Chip conveyor - Total power: 5.5 kW - Machine weight: 4500 kg - Dimensions (W x D x H): 9.45 x 2.59 x 2.1 m - Power-on hours: 17290 h - Condition: very good details fully automatic universal saw, workpiece stop for inclined cuts to the left and right, work space lighting, section gripper with autom. Adjustment of the front gripper jaw, sorting device with drive, sorting of good parts, very well maintained system acce ...

Original Replacement Rotary Pulse Encoder for Kaltenbach Saw KKS 400

Saw motor for Kaltenbach saw KKS 400 Engine was newly stored and front bearing plate renewed. Has been used as a replacement in maintenance. Motor repaired thus as new.

Machine type: Aluminum miter circular saw Manufacturer: KALTENBACH Model: TL 400 Machine number: 52565 Built: 1985 Condition: very good Offer type: used machine Technical data: Cutting range: max. x 130 mm Sheet diameter: 400 mm Drive type: el./mech. Drive: 3.0 kW / 400 V Remark: with mobile base Weight: 200 kg The machine is in a very good and ready-to-use condition and can be inspected and demonstrated at any time. We would be happy if our offer finds your interest.

Qty. 1 Second-hand sawing machine Sawing machine Mfc.: Kaltenbach Type: HDM 1431 Built: 2005 General description of HDM 1431 Can cut all types of profiles (quite thick profiles as well) with a straight or angled cut. Generally, angles are not cut with this saw, except for large sections by positioning the V against the bottom. Technical details: Profiles: Height: 50-400 mm Width: 50-1000 mm Cut at 90° min. length: 50 mm Cut at 90° max. length: 24200 mm Cut at 55° min. length: 3900 mm Cut at 45° min. length: 2900 mm Hard blade: Dia.: 1430 mm Thickness: 9.5 mm