pressure: 100 t chamfer lenght: 3100 mm distance between columns: 2670 mm throat: 300 mm stroke: 400 mm total power requirement: 15 kW weight of the machine ca.: 14 t dimensions of the machine ca.: 4,5 x 2,2 x 3,6 m - upper tool, divided 4050 mm (new) - block tool 4050 mm: V16, V50, V20, V35 (new) - Pneumatic tool clamping above - CNC controlled crowning - controlled axes: Y1, Y2, X, X1, R, Z1, Z2 - Support arms movable on linear guide and height adjustable - Fiessler photocell - Stmer ESA S560 Touch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Article number: MA841 Manufacturer: Hämmerle Type: AP 100-3100 Year of construction: 1991 Machine number: 560117 Bending length [mm]: 3100 Press power [to]: 100 Control: DNC 90 color 3D Length [mm]: 4350 Width [mm]: 2200 Height [mm]: 3300 Weight [kg]: 14000 Power supply: 380 V / 23KW Working hours [h]: Masch.ein 30431 / Hydr.ein 10486 Stroke [mm]: 400 RADIUS [mm]: 300 Machine data: Hydraulic tool clamping up Hydraulic tool clamping down Matrix shift Accessories: 1 set of upper tool 1 set lower Manuals
Cutting capacity: 12mm, working width: 3100mm, frame opening: 3050mm, feed rate: 11-23/min, outreach: 310mm, motor power: 30kW, weight: 12t.
Hydraulic Abkant and used stamping press, under current hydraulical embossing press / press brake, used, under power Serial / make: Hämmerle type / model: 2s 100-2050 year / year: 1978 pressing force / force: 100 t Bending length / operation length: 2050 mm tappet adjustment / ram adjustment: 150 mm Distance from plunger table / distance ram to table: 400 mm Stroke / stroke: 150 mm connection value / connected load: 11 kW weight / weight: 5,9 t
Machine type: CNC press brake / die bending press Manufacturer: HÄMMERLE Model: AP 200-3100 Year of construction: 1995 Condition: very good Offer type: used machine Specifications: Control: Infinitron AP-BM Compressive force: 200 t Work size: Bending length: 3100 mm Passage between stands: 2800 mm Installation height: max. 615 mm Projection: Stand projection: 310 mm Drive: 26.5 kW Remark: 3-axis controlled, controlled backgauge with 4 el./pneu. controlled stop fingers, 2 controlled bending aids at the rear, el./hydr. Crowning (hydro cushion) in Oberwange, Three-point bending system via M-axis in the lower beam, hydraulic clamping of the upper and lower tools, 2 front material pads, 1 set of upper sharpening tools, 1 set of segmented subtools, front light barrier, Emergency interruption with automatic free-ride, mobile manual control unit, Foot control uni ...
Max. pressing force: 2000kN, max. working length: 2600mm, max. stroke: 265mm, throat depth: 300mm, weight: 16t.
Max. working width: 3100mm, max. stroke: 400mm, max. pressing force: 2000kN, weight: 16.6t.
Max. working width: 3100mm, max. stroke: 400mm, throat depth: 300mm, connected load: 26.5kW, weight: 18.5t, including documentation and accessories.
pressure: 200 t chamfer lenght: 3100 mm distance between columns: 2780 mm Control: Addcobend Infinitron total power requirement: kW weight of the machine ca.: 18 t dimensions of the machine ca.: m CNC control: Addcobend Infinitron Press force: 2000 KN Bending length: 3100 mm Distance between columns 2780 mm Clear distance between columns 2780 mm Projection of the stands 300 mm Back gauge - adjustable 1600 mm Stroke max. 400 mm Space required length 4300 mm Space requirement width 2650 mm Total height 3800mm Total weight about 18000 kg Machine hours 2011: 21226 h Machine hours today: approx. 23000-25000h Retrofit: 2011: approx. CHF 86,000 • Basic remodeling • Exchange Axodyn controller units (X & M axis) • Replacement of control relays and Telemecanique PLCs with safety PLCs • Replacement of power relays and thermal overcurrent trips • Double foot switch with additional functi ...
pressure: 200 t Control: Infinitron work height max.: 1104 mm throat: 250 mm table width: 160 mm pre-running speed: 2,67 mm/min work speed: 0,001- 0,01 m/min return speed: 2,67 mm/min tank capacity: 550 l total power requirement: 28 kW weight of the machine ca.: 16,6 t dimensions of the machine ca.: 4,4x2,7x3,4 m Hydro cushion MHK 1-30 Three-point die holder DH 1-30 Stop system A2 with a travel range of 600 mm Adjustment of the stop slide along the stop bar by separate controlled Z-axes Sheet metal support system H 2 Adjustment of the individual sheet metal support brackets by separately controlled W-axes Bracket SK 10 with lifting aid 0-45 ° with linear guide technical description Slim stand principle with 500 mm free passage. The stands are provided with swivel bearings on which the table is placed. On the one hand, the cylinders are screwed between the side stands and clearly positio ...
pressure: 2000 kN chamfer lenght: 3100 mm distance between columns: 3240 mm Control: Infinitron ram stroke: 400 mm work height max.: 1104 mm throat: 250 mm table width: 160 mm pre-running speed: 160 mm/s working feed: 1-10 mm/sec return speed: 160 mm/sec tank capacity: 550 l total power requirement: 28 kW weight of the machine ca.: 16,6 t dimensions of the machine ca.: 4,4x2,7x3,4 m CNC control Infinitron Hydro cushion MHK 1-30 Three-point die holder DH 1-30 Stop system A2 with a travel range of 600 mm Adjustment of the stop slide along the stop bar by separate controlled Z-axes Sheet metal support system H 2 Adjustment of the individual sheet metal support brackets through separately controlled W-axes Bracket SK 10 with lifting aid 0-45 ° with linear guide The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data: -Pressure capacity 2000 kN -Max working width 3100 mm -Stand round 3200 mm -Stand RADIUS 300 mm -Max mounted height 965 mm -Hub, or insertion depth Steplessly adjustable 0-400 mm -Plunger speed forward + reverse per 100 mm / sec -Operating speed in 9 steps selectable 1-10 mm / sec -Drive 400 V / 26.5 kW - space requirement approx. B H 4400 x 3500 X 2200 mm -Weight approx. 18500 kg -with: - CNC - control CYBELEC ModEva 15s BJ. 2007 -Back gauge with 4 controlled pneum. on the side and height-adjustable stop fingers -controlled bending AIDS in the velocity range -Hydr. -Pneum.. Clamp of the upper tool + substation witness -mot. Crowning / hydro cushion in the table -laterally movable support arms -E - foot switch -split pointed tool R 1-100 t / m, split die