8 offers ermaksan

Category: 109 other metal working machines / Bending Machines
Latest update: 28.06.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159271986
New in: 2001
used
TOP Seller: country-de GINDUMAC GmbH
Location: 67663 Kaiserslautern

BRAND: ERMAKSAN YEAR: 2001 MODEL: AP 2600 - 80 PRODUCTION HOURS: APPLICATION TYPE: BENDING LOCATION: GERMANY MACHINE TYPE: BENDING MACHINES AVAILABILITY: IMMEDIATELY GENERAL DATA MEASUREMENTS WIDTH: 2150 MM MEASUREMENTS DEPTH: 3000 MM MEASUREMENTS HEIGHT: 2700 MM MACHINE WEIGHT: 5500 KG CONTROL UNIT BRAND: BUREL ELEKTRONIK MODEL: BRL-407.1 MAIN DRIVE PRESSING FORCE: 800 KN NUMBER OF AXIS: 2 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - NO CROWNING/BOMBAGE COMPENSATION

Category: 109 other metal working machines / Bending Machines
Latest update: 20.09.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159385318
New in: 2016
used
TOP Seller: country-it GINDUMAC GmbH

BRAND: ERMAKSAN YEAR: 2016 MODEL: Speed Bend Pro 3100x175 PRODUCTION HOURS: 0 APPLICATION TYPE: BENDING LOCATION: ITALY MACHINE TYPE: BENDING MACHINES AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 2350 MM MEASUREMENTS DEPTH: 4550 MM MEASUREMENTS HEIGHT: 2900 MM MACHINE WEIGHT: 14000 KG CONTROL UNIT BRAND: DELEM MODEL: DA 66T MAIN DRIVE BENDING LENGTH: 3100 MM NUMBER OF AXIS: 6 Additional Information Tooling included: 1 punch and 1 die with 4 slots with the total length of the bending machine MACHINE BENEFIT TECHNICAL MACHINE BENEFITS: - 175 TONES BENDING CAPACITY

Category: 109 other metal working machines / Laser Cutting Machines
Latest update: 28.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 153205727
New in: 2014
used
Seller: country-pl MASZYNERIA SP. Z O.O.
Price: 46.025 €

ERMAKSAN LASERMAK 6000 6X2 laser cutter was produced in 2014. Technical parameters: – laser source: 6000 W CO2-laser GE Fanuc C6000i-Model C – RF-excitation: 2 MHz – power stability: ± 2% (power monitor) – laser wave length: 10.6 μM – beam mode: Fanuc Low Order Mode – laser shutter: mechanical safety shutter – laser gas composition: CO2 / He / N2 – gas consumption by laser: 20 l / h – cooling water flow rate: 250 l / min – maximum cutting capacity: mild steel 25 mm (during tests the maximum achieved: 30 mm), stainless steel 15 mm, aluminum 12 mm - machine activation time: 22899 h - working time: 10122 h - cutting time: 8429 h – total energy requirement: 100-120 kW – cutting head focal length: 5 -7” -10 inch – maximum worksheet size: 6150 x 2000 mm – maximum burden capacity: 4000 kg – machine axes: 5 axes [X, Y, Z, U (X2), V] – axis ...

Category: 107 sheet metal working / CNC Hydraulic Plate Shear
Latest update: 22.11.2021 add to watchlist
approved
dealer
ankerimg
item-No.: 153016696
new
Seller: country-de RM-Industrieservice
Location: 57334 Bad Laasphe

Hydraulic table scissors Manufacturer: Ermaksan Type: HGS 3100 x 6 Control: Cybtouch 6 Max working area 3100 mm Max sheet thickness 6 mm Standard equipment -wear-resistant knives Upper knife: two-sided; Subknife: four-sided -Cybelec control unit CYBTOUCH 6 -Back stop 1,000mm with drive, accuracy 0.1mm -Side ruler 1,000mm and front pads -metric and inch scales -Ball spindles on the front bearings for easier placement of sheets -Protective plates front, rear and side, CE-standard-suitable -Light curtains at the rear (occupational safety) Bske2frwqw -Blechglie system -Electrical system from Siemens -Hydraulic system from Hörbiger -automatic hydraulic cutting gap adjustment -Smooth high-pressure pump -Holding springs -retractable pedal -Emergency stop button Ozbbv -Shadow line -foldable finger protection -CE regulations and compliance certified specifi ...

Category: 107 sheet metal working
Latest update: 28.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 146414027
New in: 2011
used
Seller: country-pl MASZYNERIA SP. Z O.O.
Price: 120.455 €

Laser cutting machine ERMAKSAN LASERMAK 4000.3 x 1.5 with 4 kW power was manufactured in 2011 in Turkey. The machine is equipped with two interchangeable working tables measuring 3000 x 1500 mm. The laser enables cutting of 20 mm thick black steel, 12 mm thick stainless steel and 8 mm thick aluminum. The machine uses CNC machine control, resonator and linear motors from the Japanese company Fanuc. Technical parameters of the laser cutter: - laser power: 4 kW - maximum pulse power: 5kW (pulse peak power) - working time of the laser beam: 7700 h - table dimensions: 3000 x 1500 mm - maximum cutting thickness, black steel: 20 mm - maximum cutting thickness, stainless steel: 12 mm - maximum cutting thickness, aluminum: 8 mm - maximum positioning speed: up to 170 m / min - maximum acceleration: X 2G axis, Y axis 3G m / s2 - repetition accuracy: 0.015 mm - positioning accuracy: +  ...

Category: 107 sheet metal working / Guillotine Shears
Latest update: 26.11.2022 add to watchlist
ankerimg
item-No.: 160313272
New in: 2012
used
Seller: country-cz STROJTOM s.r.o.

max. sheet width - 2100 mm max. thickness - 6 mm main motor output - 11 kW weight of machine - 4300 kg

Category: 107 sheet metal working
Latest update: 27.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160320920
new
Seller: country-de SALING Werkzeugmaschinen GmbH
Location: Barsbüttel/Hamburg

sheet width:3100 mm plate thickness:6 mm table length:3400 mm table width:490 mm table height:800 mm stroke:18 pro Min. quantity of oil:150 l Numbers of downholders:14 cutting angle:1,2 ° total power requirement:11 kW weight of the machine ca.:5,5 t mot.digital controlled backgauge, workspace:1000 mm :1000 mm front support arms with T-slot and flip cams:1000 mm

Category: 109 other metal working machines
Latest update: 01.08.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 67414805
New in: 1987
used
Seller: country-bg OSLARKA Ltd

welding line for galvanized and black pipes.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE used machinery 25 years online