BEYELER used machine for sale

Cutting length : 4100mm, Max. sheet thickness 10mm,

Cutting length : 4100mm, Max. sheet thickness 10mm,

Key data: 150 t, 2550 mm

Stock number: 3866 CNC PRESS BRAKE Manufacturer: BEYELER, Type: PR 8 150D x 3100 mm Machine NO.: 96/445/002, Year of manufacture: 1996 Specifications: Gr. bending length 3100 mm Gr. pressure capacity 150 tons Stroke length 215 mm Column passage 2550 mm Projection 305 mm Total power 7.5 kW CNC control Cybelec DNC 908 PS Presscad Fabr. Controlled in 4 axis Y1-Y2-x1-x2 axes Length: 1900 mm, Height: 2600 mm, Width: 3500 mm, Weight: 9500 kg

Hydraulic Press Brake BEYELER PR6 100/2550 Year of construction: 1998 Command: CYBELEC DNC 804 PS/K 6 axes Capacity: 100 T x 2550 mm Maxi travel: 215 mm Throat depth: 405 mm Distance between uprights: 2050 mm Maxi closing speed: 200 mm/s Working speed: from 1 to 10 mm/s Motor: 7,5 kW sBack Rear Gauge R1 - R2 - Z1 - Z2 Dual pedal footswitch Voltage: 380 V Dimensions (L x W x H): 3000 x 2000 x 2550 mm Weight: 6,5 T

Press brake Manufacturer: Beyeler Type: RT 1600x5100 CNC Year of construction: 1986 CNC control: Cybelek DNC60 Pressure: 160 to. Bending length: 5,100 mm

Beyeler VE 6.5 x 4080 hydr. guillotine shears, Year of construction 1993, cutting width 4,000 mm, Backdrop-guided knife bar, Auto. Cut / angle adjustment Ermaksan, sheet thickness up to 10 mm, annual security check, Accessories spare knives,

Working width: 4100mm, pressing force: 1250kN, controls: DNC 80, length: 4350mm, width: 1300mm, height: 2660mm, weight: 11t, including tools.

Pressing force: 700kN, working length: 700mm, distance between the coloums: 350mm, stroke: 165mm, length: 955mm, width: 1685mm, height: 2501mm, weight: 2.3t.

Press brake, bending machine, bending machine Model: CNC Manufacturer: Beyeler Type: EuroBrake 3, 100x4100mm Control: Cybelec Euro 3 Year of construction: 1991 Capacity: 100t Max. working width: 4100mm Motor power: 8kW Machine dimensions: 4800x1400x2500mm Machine weight: 11000kg

Capacity: 6200 x 13 mm (steel) Delem DAC 350 control NC controlled back gauge NC controlled sheet thickness adjustment

The machine is in good technical condition, it is possible to test it by agreement. Machine weight: 8500 kg Nominal pressing force: 100 t (Mp) Working table length: 3100 mm Accessories: (straight and curved punch, die 10,12,16). Control system CYBELEC DNC 800.

Capacity 2050 x 60 tons New DSP laser safe Cybelec DNC 60 control Y1, Y2 and X axis CNC controlled Including set of tools

Capacity 2550 x 225 tons Cybelec Euro III CNC control

Type: RT 80x2050 Parameters: 80 t, 2000 mm Manufacturer: Beyeler Year of production: 1991 Location: Czech Republic Description: The machine is in good technical condition. Nominal forming force: 80t Working length: 2000mm Power consumption: 11.5 kW Weight: 5500kg Upon agreement the possibility of tours running.

Hydraulic press brake prod. by Beyeler Switzerland, type EURO III 100x3100. CNC control Cybelec EURO III, 3 controlled axes - controlled axes Y1+Y2+X+compensation of the deflection arrow of the table Wila Moducrown CVB/0. CNC control very easy to use Pressure 100 tons, bending length 3100 mm. Between supports 2650 mm. Stroke of cylinders 220 mm, loading 300 mm. Motor 9 kW, weight 8 tons. Set of punches of Amada-Promecam standard, + 6 groove die. Full technical documentation DTR, a stand instructions BiHP in Polish. We offer after-sales repair service and adjustments of CNC electronics and hydraulics.

Hydraulic press brake man. by Beyeler Switzerland, type RT 125 x3100. CNC control Cybelec DNC 3300PS, 3 controlled axes - controlled axes Y1+Y2+X CNC control very easy to use Pressure 125 tons, bending length 3100 mm. Between supports 2650 mm. Cylinder stroke 220 mm, loading 300 mm. 10 kW motor, weight 8.8 tons. A set of Amada-Promecam standard punches, + 9 groove die 120x120 mm. Full technical documentation DTR, occupational health and safety manual in Polish. We offer after-sales repair service and adjustments of CNC electronics and hydraulics.

Hydraulic press brake prod. by Beyeler Switzerland, type PR6 150x3100, rb. 1998. CNC control Cybelec DNC 80 PS, 6 controlled axes - controlled axes Y1+Y2+X+R+Z1+Z2 +compensation of table deflection arrow controlled from CNC. Windows, 2D graphics, color LCD screen, simulation of bending process. Hydraulic punch clamping. Pressure 150 tons, bending length 3100 mm. Between supports 2650 mm. Motor 11 kW, weight 9 tons. Full technical documentation DTR, work instructions BiHP in Polish. Possible training in operation and after-sales service of CNC and the whole machine.

Hydraulic guillotine for sheet metal cutting by Beyeler Switzerland type VR 10-3070, 3070 mm x 10 mm (ST40). Cybelec DNC10 PS fully CNC controlled machine. The machine has a variable gap between the knives and a hydraulically variable knife angle of 1 - 2.5 degrees, set after entering the thickness and hardness of the material. 18kW motor. Machine weight 9 t. Super-fast bumpers - 1050 mm bumper departure. Electrically adjustable cutting length in the range of 10-3070 mm. 2 supports to support sheet metal at the front of the machine, plus a 90 degree cutting gauge. Light line for line cutting. Original DTR documentation and health and safety instructions in Polish. Infrared protection of the rear working area. The machine is designed for continuous operation - 3 shifts.

Hydraulic press brake prod. by Beyeler Switzerland, type PR6 100x4100, rb. 1999. CNC control Cybelec DNC 80 PS, 6 controlled axes - controlled axes Y1+Y2+X+R+Z1+Z2 +hydraulic compensation of table deflection arrow controlled from CNC. Windows, 2D graphics, color LCD screen, simulation of bending process. Pressure 100 tons, bending length 4100 mm. Between supports 3650 mm. Motor 7,5 kW, weight 11 tons. Set of bending tools of Amada + Trumpf system. Full technical documentation DTR, a workstation manual BiHP in Polish. Possible training in operation and after-sales service of CNC and the whole machine.

This Beyeler PR6 Bending machine was manufactured in the year 1997. It is equipped with a DNC 800 control unit. The machine has a pressing force of 1000 kN and a bending length of 3100 mm.

Description: - Operating voltage: 3 X 380 V - Frequency: 50 HZ - Rated current: 21 A - Sheet passage: approx. 2000 m - with electrically adjustable stop - Pressing force: Presumably 100 tonnes - Attention: The press brake tools on the machine are not included in the scope of delivery. However, the accessories on the pallet are included in the scope of sale. serial number: 591 06 3165, bending length: 3,100 mm, control: Swissax Euro III, weight approx.: 7,000 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 1,400 x 2,500 mm

pressure: 150 t chamfer lenght: 4100 mm stroke: max. 315 mm Control: Cybelec ModEva15T pressing speed: 1 --> 10 mm/sec closing speed: max. 200 mm/sec Stop Time max.: 110 mS compressed air: max 8 bar total power requirement: kW weight of the machine ca.: 13,2 t - Automatic bounce compensation - Hydraulic crowning of the lower beam - Table with hydraulic die clamping - 2 pieces of aluminum support arms with 3 grooves including stainless scale and Angle stop - hydraulic ram clamping type RF-A” - Hydraulic unit for punch and die clamping - Lifting and installation height increase by 100 mm - Roller conveyor guide on the front of the lower beam for front support arms - 2 pieces of H-axes manually with handwheel (height adjustment of the front Support arms over 200 mm, the weight is balanced by gas springs) - 2 pieces of hydraulic bending aids - 1st and 2nd measuring point for the Mini-Rotax ...

pressure: 150 t chamfer lenght: 3100 mm distance between columns: 2550 mm column arm: 405 mm table width: 150 mm ajustment speed: 200 mm/sec working feed: 10.0 mm/sec return speed: 120 mm/sec stroke: 215 mm dayligth: 465 mm table height: 960 mm operating pressure: 320 bar oil volume: 200 l voltage: 3x 400 V total power requirement: 15.0 KW weight of the machine ca.: 9500 kg range L-W-H: 3958 x 2350 x 2750 mm maintained condition () Furnishing: - BEYELER electro-hydraulic CNC press brake - CNC control CYBELEC model DNC 800 HP numerical CNC control unit 2D graphical programming & product display Color screen Tool & program library clear and logically structured screen pages Collision display Swivel operation, front right - CNC controlled axes (Y1+Y2-X-R-Z1+Z2) - CNC-controlled back gauge adjustment (X-axis) - CNC-controlled vertical adjustment of the stop beam (R-axis) - CNC-contro ...

pressure: 60.0 t chamfer lenght: 2050 mm distance between columns: 1550 mm column arm: 255 mm stroke: 165 mm dayligth: 360 mm table height: 890 mm ajustment speed: 85.0 mm/sec working feed: 6,5 mm/sec back stop - adjustable: max. 500 mm oil volume: 100 ltr. total power requirement: 4,0 kW weight: 4600 kg range L-W-H: 2700 x 1450 x 2400 mm Machine from a workshop for the disabled maintained condition () Furnishing: - CNC electro-hydraulic press brake - CNC CYBELEC EURO IV control unit high resolution screen Clear, concise menus in the operators language Tools and products library - Control panel, right front - CNC controlled axes: Y1 + Y2 + X axis - CNC electric back gauge (X axis) - 2x manually adjustable stop fingers - AMADA-SYSTEM A upper tool adapter including upper wedge crowning very many bending/insertion tools (stamps + matrices) - 2x front material/sheet metal support arms  ...

pressure: 100 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 255 mm stroke: 215 mm dayligth: 410 mm table height: 890 mm ajustment speed: 100 mm/sec working feed: 6,5 mm/sec back stop - adjustable: max. 500 mm oil volume: 160 ltr. total power requirement: 5,5 kW weight: 7200 kg range L-W-H: 3750 x 1450 x 2500 mm Furnishing: - electro-hydraulic press brake - CNC CYBELEC EURO III control unit - Control panel, right front - CNC electric back gauge (X axis) - 2x manually adjustable stop fingers - freely movable 2-hand/foot control - side protection device (protective grille) - rear protective device (protective grille) - Operating instructions machine + control Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9308337 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer for sale OHL CNC Beyeler PR6 100t/3m. Straight and curved punch, dies 10, 12, 16.

pressure: 100 t chamfer lenght: 2050 mm distance between columns: mm stroke: 415 mm dayligth: 550 mm working flow: 10 mm/s Control: total power requirement: 7,50 kW weight of the machine ca.: 7,50 t dimensions of the machine ca.: 3,00 x 2,30 x 3,20 m • Control CYBELEC ModEva 12S • Controlled axes: Y1, Y2, X, X1, R, Z1, Z2 • CNC controlled crowning • Fiessler light barrier at the front • Hydraulic tool clamping RFA above + below • Tool package: Stamp P4 RFA Radius 3 mm 88° Height 175 mm: 1720mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 060 t chamfer lenght: 2050 mm distance between columns: mm number of strokes - stepless: compressed air: 8 bar closing speed: 200 mm/sec total power requirement: kW weight of the machine ca.: 6,00 t dimensions of the machine ca.: 3,00 x 2,10 x 2,35 m • Controlled axes: Y1, Y2, X, R, Z1, Z2 • Hydraulic tool clamping above + below • CNC controlled crowning • 2 support arms • 1 set of upper tools, length approx. 2200mm, R1, segmented • 1 die set V12/88°, length approx. 2000mm, segmented The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 150 t Opening maximum: 4100 mm Workpiece height maximum: 215 mm CNC Brand: Cybelec Max. bending length:        4100mm Distance between column:    3600mm Max. pressing force:        150T Beam stroke:                215mm Approch speed:              200mm/min. Working speed:              10mm/min. Return speed:               110mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis:  6 Length:                     5100mm Width:                      2000mm Height:                     2900mm  ...

Tandem 2 x 5m. Y1, Y2, X, R,, Z1 & Z2 Second controller must be repaired. - Pressure force: 150 t - Bending length: 5.100 mm - Axes: 6 (Y1 Y2 X R) - Working speed: 200 mm/seg - Control: DNC80 - Stroke max: 250 mm - Power: installed max: 11 kW - Weight: 14.000 kg