- Planer width 410 mm - Planing height 200 mm - 4 knife shaft
0: ja Working width: 2380 mm 0: nein Bäuerle grand piano stop table --------------------------------- With Powasert, automatic screw feeder and Somatec hardware punch (customer processed Maco Multimatic. Support tables dimensions: length 2,380 mm, depth 1,390 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
2-drum Planing width 410 mm Power of the engine 6 HP Dust nozzle 140 mm Fuegeleiste
Bandsäge Bäuerle Type: BS 70 Passage height max. 490 mm Projection/cutting width 670 mm Motor power 4 kW With stop on saw table Band saw guide 3-roller guide top and bottom Table tiltable Rubber coating on the saw rollers Band saw blade roll diameter 700 mm Dimensions 1300 mm x 800 mm Height 2400 mm Weight approx. 700 kg
Bäuerle SFM 2 swivel spindle cutter 45° Swivel and height adjustment with handwheel Re- Li Run Speeds 2800/5600, 4500/9000, 6000/12000 pole switchable heavy duty Engine power 5.5 hp
Bench milling machine Bäuerle SFM with sliding slide and feeder. • Spindle diameter: 30 mm • Clamping length: 140 mm • Left / Right Rotation • Motor: 3 kW.
Dickenplanel Bäuerle Type DM 63 Planer width 630 mm Planing height 220 mm 4 knife shaft Motor power 4.5 kW 2 sliding rollers in the table Speed of the knife shaft 5500 rpm. Feed speeds 7/14 m/min. and 9/18 m/min. (fold belt) Weight approx. 1200 kg
Dimensions (L,W): 2000 x 1200 mm Weight: , kg tiltable yes/no: nein Bauerle work table ------------------------ Length 2000mm Width 1200mm Height approx. 900 mm (height adjustable) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L,W): 3000 x 1.600 mm Weight: , kg tiltable yes/no: nein 1 pc. Bäuerle glazing stand --------------------------------- Length 3000mm Height 1,600mm Roll width 200 mm Pneumatic high/low via foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dresser with joining cutter and feed Brand Bäuerle Type AS 41 Planer width 410 mm Table length 1430 mm and 1120 mm Stop with extension over the entire length of the table Stop height 120 mm Motor power 3 kW 2 knife shaft Speed of the knife shaft 5000 rpm. Removable fillet plates are installed in the knife shaft. After removing the plates, Throat and milling knives are clamped on the shaft. Joining milling cutter with 2 knives With 3 rollers feed wood-her Since the dressing tables are of different widths, folding work can be carried out up to 16 mm folding depth Weight approx. 950 kg
Electric motor, three-phase motor -Manufacturer: Bäuerle, electric motor type UOF100/94-2 -Power: 1.5/1.75 kW -Speed: 1430/2880 rpm -Shaft: Ø 22 x 60 mm -Construction: B3 -Dimensions: 345/270/H225 mm -Weight: 25 kg
Engine performance 5.5 HP Planing width 630 mm Two knife shaft with standard blades 2 St. table roller metal Feed roller metal corrugated Height of the table by hand wheel Extractor hood 150 mm maximum clearance height 210 mm
Equipment/technical data: - Table extension on both sides (table length 2.2 m), with extendable support - Control panel at eye level - electr. swivel -5 to +45° - Spindle electr. height-adjustable (or via handwheel) up to 150 mm (-35 + 115) - Milling stop with digital display of the stop position - 3-roller feeder - Emergency stop switch on the control panel and on the machine - Suction nozzle Ø each 120 mm (V=24m/s) at the stop (680 m³/h) and machine body (1,060m³/h) - Speed 1500 / 3000 / 4500 / 6000 / 9000 / 12000 rpm (manually adjustable) - Power: 6 / 7.5 kW pole switchable - Connection 12.6 / 15.7 A ; 400V, 3~; 50 Hz - Dimensions: 2,200 x 850-1,600 mm All information is subject to the actual equipment
M. No.: 91053207 Format (cm): 38x38 Pockets: 4 Folding arts : Letter fold, zigzag fold, double parallel, single fold Equipment / Additional information: Compressor Table
Milling height 200 mm Milling depth 65 mm Spindle length 260 mm Maximum tool flight circle 250 mm Table height 870 mm Spindle diameter 40 mm Workpiece clamping height 150 mm Compressed air 6 bar Motor power 11 kW Feed maximum 4.5 m/min. Feed pneumatically infinitely variable Suction connection diameter 160 mm Space requirement L: 1010 mm x W: 1420 mm x H: 1450 mm Weight approx. 1200 kg
Motor power 4/5, 5HP Rpm: 2800/5600/4500/9000/6000/12000 RPM Right / left rotation Spindle 30 mm Shaper fence with fine adjustment of both sides Exhaust 120 mm on milling fence Roller table + guide rod (missing: still cpl. customer) Protect your hands
Pendulum saws Bacus for wall mounting Saw á 500 mm Built in 1982 L x W x H: 70 x 60 x 100 cm Weight 370 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Top-loading, bottom-feed air feeder with register table, 2 buckles, belt delivery compressor, movable chassis
working width: 510 mm; cutter head: stripe knife; number of blades: 2; surface table length: 2600 mm; table adjustment: lever; read out table height: scala; sourface fence adjustable: yes; motor power: 5,5 kW; motor brake: yes; machine length: 2700 mm; machine width: 1000mm; weight: 1050 kg;