13 offers ambold

Category: 106 presses / Double Column Eccentric Presses
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 157076756
used
Seller: country-de Ambold Pressen GmbH

pressure: 200 t throat: - mm stroke: 250 mm Table dimensions: 2420 x 840 mm ram surface: 1850 x 650 mm dayligth: 500 mm ram adjustment: 110 mm distance between columns: 1900 mm table height: 170 mm no. of strokes: 25 - 45 Hub/min total power requirement: 22 kW dimensions of the machine ca.: 2550 x 2370 x 3820 mm weight: 30 t - pneumatic clutch - press safety valve, Herion - cam switch, Balluff - chain break monitoring - hydr. overload, Hydac - motor. alide adjustment with digital display - separate control cabinet with safety control ABB - separate two-hand control panel with foot switch - slidable side protective doors - front protection by light barriers vertical + horizontal The machine shown and described above is safe for hand inlays. The machine is also in anorther variant or also can be used as an automatic feeder. Equipment possible according to customer agreement. The data for ...

Category: 106 presses / Open Gap Eccentric Presses
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 157076728
used
Seller: country-de Ambold Pressen GmbH
Location: Schmölln (Thüringen)

pressure: 25 t throat: 200 mm stroke: 4 - 80 mm table surface area: 520 x 400 mm no. of strokes: 160 Hub/min force: Dauerlauf 1765 J dayligth: 302 max mm dayligth: 100 min mm adjustment of stroke: 8-84 mm ram adjustment: 55 mm ram surface: 185 x 180 mm ram hole: 40 H7 mm force: 3530 J hole in the table: 210 x 170 mm width of T-slots: 22 mm connected load: 3,5 kW rated current: 9 frequency: 50 Hz voltage: 380 V weight of the machine ca.: 2700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses / Open Gap Eccentric Presses
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156873003
new
Seller: country-de Ambold Pressen GmbH
Location: Schmölln (Thüringen)

pressure: 25 t throat: 200 mm stroke: 4 - 80 mm table surface area: 520 x 400 mm no. of strokes: 160 Hub/min ram surface: 160 x 160 mm ram adjustment: 40 mm ram hole: 32 H7 mm hole in the table: 200 x 150 mm clamping plate: 500 x 380 x 60 mm total power requirement: 2,7 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 1,3 x 1,0 x 1,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses / Open Gap Eccentric Presses
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 157076717
new
Seller: country-de Ambold Pressen GmbH
Location: Schmölln (Thüringen)

pressure: 25 t throat: 200 mm stroke: 4 - 80 mm table-size: 520 x 400 mm no. of strokes: 160 Hub/min work capacity during endurance run: 1370 Nm force: 2740 Einzelhub adjustment of stroke: 4 - 80 mm ram adjustment: 40 mm ram surface: 160 x 160 mm hole in the table: 200 x 150 mm clamping plate: 500 x 380 x 60 mm hole in the table: 80 mm weight of the machine ca.: 1,9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses / Open Gap Eccentric Presses
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160155499
used
Seller: country-de Ambold Pressen GmbH
Location: Schmölln (Thüringen)

pressure: 40 t throat: 225 mm stroke: 8 - 84 mm table surface area: 580 x 450 mm ram adjustment: 55 mm no. of strokes: 130 Hub/min ram surface: 185 x 180 mm ram hole: 40 mm hole in the table: 210 x 450 mm clamping plate: 570 x 450 mm total power requirement: 3,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 1,4 x 1,1 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses / Open Gap Eccentric Presses
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 157076709
used
Seller: country-de Ambold Pressen GmbH
Location: Schmölln (Thüringen)

pressure: 40 t throat: 225 mm stroke: 8 - 84 mm table surface area: 580 x 450 mm ram adjustment: 55 mm no. of strokes: 130 Hub/min ram surface: 185 x 180 mm ram hole: 40 mm hole in the table: 210 x 450 mm clamping plate: 570 x 450 mm total power requirement: 3,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 1,4 x 1,1 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses / Open Gap Eccentric Presses
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 157076722
new
Seller: country-de Ambold Pressen GmbH
Location: Schmölln (Thüringen)

pressure: 40 t throat: 225 mm stroke: 8-84 mm Table dimensions: 580 x 450 mm ram adjustment: 55 mm no. of strokes: 130 Hub/min ram surface: 185 x 180 mm ram hole: 40 H7 mm hole in the table: 210 x 170 mm T-slots: 22 clamping plate: 570 x 450 x 65 mm total power requirement: 3,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 1,4 x 1,1 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses / Open Gap Eccentric Presses
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 157076763
new
Seller: country-de Ambold Pressen GmbH
Location: Schmölln (Thüringen)

pressure: 40 t throat: 225 mm stroke: 8-84 mm Table dimensions: 580 x 450 mm ram adjustment: 55 mm no. of strokes: 130 Hub/min ram surface: 185 x 180 mm ram hole: 40 H7 mm hole in the table: 210 x 170 mm T-slots: 22 clamping plate: 570 x 450 x 65 mm total power requirement: 3,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 1,4 x 1,1 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses / Open Gap Eccentric Presses
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158927365
New in: 1996
used
Seller: country-de Ambold Pressen GmbH
Location: Schmölln

pressure: 55 t throat: 250 mm stroke: 10 - 90 mm table-size: 640 x 495 mm no. of strokes: 120 Hub/min ram adjustment: 55 mm ram surface: 195 x 210 mm ram hole: 40 H7 mm hole in the table: 250 x 190 mm T-slots: 22 clamping plate: 620 x 485 x 65 mm total power requirement: 4 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: 1,5 x 1,2 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses / Open Gap Eccentric Presses
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156873022
used
Seller: country-de Ambold Pressen GmbH
Location: Schmölln (Thüringen)

pressure: 55 t throat: 250 mm stroke: 10-90 mm table-size: 640 x 495 mm no. of strokes: 120 Hub/min ram adjustment: 55 mm ram surface: 290 x 210 mm ram hole: 40 H7 mm hole in the table: 220 x 190 mm T-slots: 22 clamping plate: 620 x 485 x 65 mm total power requirement: 4,5 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: 1,5 x 1,2 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses / Open Gap Eccentric Presses
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156872967
new
Seller: country-de Ambold Pressen GmbH
Location: Schmölln (Thüringen)

pressure: 55 t throat: 250 mm stroke: 10-90 mm table-size: 640 x 495 mm no. of strokes: 120 Hub/min ram adjustment: 55 mm ram surface: 290 x 210 mm ram hole: 40 H7 mm hole in the table: 220 x 190 mm T-slots: 22 clamping plate: 620 x 485 x 65 mm total power requirement: 4,5 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: 1,5 x 1,2 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses / Open Gap Eccentric Presses
Latest update: 09.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 157076750
new
Seller: country-de Ambold Pressen GmbH
Location: Schmölln

pressure: 60 t throat: 280 mm stroke: 5/100 mm Table dimensions: 750 x 500 mm ram adjustment: 70 mm ram head dimension: 485 x 295 mm strokes per minute: 54 hole in the table: 180 mm total power requirement: ca. 7,5 kW kW weight of the machine ca.: ca. 4,93 t dimensions of the machine ca.: 2,8 x 1,55 x 1,52 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Latest update: 08.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160386698
New in: 1966
used
Seller: country-de Innovac GmbH
Location: Deutschland

Stroke: 45mm, weight: 3.5t.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE used machinery 25 years online