AGIE CHARMILLES used machine for sale

AGIE CHARMILLES wire cut AC2 VERTEX year `2010

AGIETRON HYPERSPARK 2 HS Sinker 2008 Design with lowerable working container Work table with 50 mm hole grid travel X/Y/Z 350x250x350 mm -Workpiece size: LxWxH=650x580x250 mm or 820x420x250 mm Integrated C axis, for rotation, indexing and erosion Electronic laser measurement of all axes Detection of the electrode and workpiece position 1 set of documentation (CD + manuals) AGIEVISION 5 Control with multitasking DNC interface with transmission protocolXon/Xoff and LSV2 2 serial interfaces RS 232C for DNC and master computer LAN connection for data exchange via in-house network RJ45 3 drives: hard drive, 3 1/2" floppy disks, CD-ROM Without tool changer

X-travel: 250mm, y-travel: 160mm, table dimensions: 420x250mm, max. workpiece height: 160mm, max. workpiece weight: 120kg, length: 1545mm, width: 1240mm, height: 1065mm, weight: 540kg, with documentation, the machine should be overhauled, an inspection is possible.

X-travel: 800mm, y-travel: 600mm, z-travel: 400mm, U-travel: 60mm, V-travel: 60mm, workpiece dimensions: 1300x910x400mm, max. workpiece weight: 2.3t, dielectric capacity: 210l, connected load: 10kVA, length: 2550mm, width: 2350mm, height: 2200mm, weight: 4.84t, with generator, wire guide, protective cabin, documentation and other accessories, on-site inspection is possible.

Defected Power cable for down head

Control unit Heidenhain iTNC 530 X-Axis travel 800 mm Y-Axis travel 600 mm Z-Axis travel 500 mm X-Y-Z axes speed 20 - 20 - 40 m/min Table length 610 mm Table width 610 mm Table load 120 kg Spindle speed 24000 rpm Spindle taper HSK A 63 - HSK E 50 Motor power 25/21 kW Tool changer 120 positions Dimensions L 6500 x W 5500 x H 3000 mm Weight 8300 kg

X-Axis travel 350 mm Y-Axis travel 250 mm Z-Axis travel 300 mm X-Y-Z axes speed 6 - 6 - 15 m/min Table length 500 mm Table width 400 mm Work tank size 790 x 530 x 350 mm Workpiece weight 500 kg Linear tool changer 4 (Std. tooling) / 5 (Combi tooling) Rotary tool changer 16-80 pos. (Std. tooling) / 32-160 pos. (Combi tooling) Dimensions L 1900 x W 1690 x H 2398 mm Weight 2800 kg

Machine is in very good condition X : 600 mm Y : 400 mm Z : 350 mm

Machine is in very good condition X movement (mm) : 350 Y movement (mm) : 255 Z movement (mm) : 255

Agie Charmilles CUT30P EDM Wire Cutting Machine Axis movement: X, Y, Z : 600 x 400 x 350 mm Maximum workpiece size : X, Y, Z 1050 x 800 x 350 mm

table length: 950 mm table width: 630 mm ampere: 35 A max. size of workpiece LxWxH: 450 x 300 x 100 mm x-axis: 600 mm y-axis: 400 mm z-axis: 350 mm Control: Windows XP SP2 range L-W-H: 310 x 280 x 232 cm workpiece weight: 1000 kg total power requirement: 11 kVA weight of the machine ca.: 4,44 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. -No.: 10356 Manufacturer: AGIE CHARMILLES Year of construction: 2007 Type of control: CNC Control: iTNC530 Country of origin: Schweiz X-Travel: 800 mm Y-Travel: 500 mm Z-Travel: 540 mm Main spindle speed range: 16000 RPM Table Dimensions (Lengthxwidth): 910x500 mm Table Load: Vmax = 500kg, 5m/min = 1100kg kg Number of T-slots: 5 Tool change time (chip-to-chip): 8 s Max. Tool Weight: 6 kg Max. Tool Length: 305 mm Max. Tool Diameter: 77 mm Tool change time: 6 s T - slot spacing: 100 mm Numbers Of Tools In Magazin: 24 Tool changer: Doppelarm, seitlich montiert Rapid Traverse X-Axis: 24 m / min Rapid Travel Y-Axis: 24 m / min Rapid Traverse Z-Axis: 20 m / min Further information: Addition: probe

Ref. -No.: 10339 Manufacturer: AGIE CHARMILLES Year of construction: 2008 Type of control: CNC Control: Heidenhain iTNC 530 (2P) Storage location: Halberstadt Country of origin: Schweiz serial number: 107.20.00.040 X-Travel: 650 mm Y-Travel: 600 mm Z-Travel: 500 mm Main spindle drive power: 30/39 kW Main spindle speed range: 20.000 RPM Table Dimensions (Lengthxwidth): 800 x 600 mm Table Load: 500 kg Max. Workpiece Weight: 6,5 kg Tool change time (chip-to-chip): 7 s Max. Tool Length: 300 mm Max. Tool Diameter: 130 mm Tool change time: 1,5 s Workpiece Diameter At Full Load: 80 mm Workpiece Diameter With 2 Vacant Positions: 130 mm T - groove width: 14 mm T - slot spacing: 63 mm Tool Taper: HSK-A63 Numbers Of Tools In Magazin: 60 Tool changer: CT-60 Feed Speeds X/Y/Z Axis: 40/40/30 mm / min Feed Capacities X/Y/Z: 4/4/6 N Further information: Laser tool measuring system Type = BLUM laser syst ...

x-axis: 350 mm y-axis: 250 mm z-axis: 256 mm U-axis: +/-70 mm V-axis: +/-70 mm dimension of workpiece: 750x550x256 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table-size: 800 x 500 mm workpiece height: +-30º/510 mm travel x / y / z: 800 x 550 x 510 mm workpiece sizes: 1300 x 1000 x 510 mm workpiece weight: 3.000 kg wire dia.: 0,10-0,33 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 600 mm table width: 400 mm x-axis: 400 mm y-axis: 300 mm z-axis: 350 mm workpiece sizes: 900 x 630 x 350 mm volume: 490 L total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: 800 mm travel -y axis: 500 mm workpiece sizes: 1.300 x 1000 U/min ampere: 60 A workpiece weight: 3.000 kg Control: CNC VISION 5 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Operating hours: 12000 Technical data Working table: Length: 680 mm Width: 450 mm Max. dimensions of work piece: Length: 1000 mm Width: 550 mm Height: 220 mm Table load max.: 750 kg Longitudinal traverse (X-axis): 350 mm Cross traverse (Y-axis): 220 mm Vertical travel (Z axis): 220 mm Taper-cut +/-: 30 ° Diameter of electrode wire: from: 0.33 mm up to: 0.10 mm Max. cutting speed with wire 0.33 mm: 400 mm2/min Total power required: 10 kVA Dielectric aggregate: Contents: 760 l Air connect: 6 - 7 bar Voltage 50 Hz 3x: 400 Volt Total power required: 12 kVA Weight total installation approx.: 2100 kg Overall dimensions machine: Length: 2050 mm Width: 2020 mm Height: 2000 mm Various accessories: Cooling unit for fluttines