BIESSE used machine for sale

Axes Strokes X = 3706mm Y = 2294mm Z1 = 515mm Z2 = 371mm Max rotation 24000 rpm C axis = 360 deg non-stop rotation B axis = 360 deg non-stop rotation 16 position revolver toolchanger

3200 cutting width 3200 Back Gauge

Key data: 2600 mm, 900 mm, 80 mm

SPECIFICATIONS: CNC Editor BSolid Basis Working range X mm: 200 - 2600 Working range Y mm: 35 - 900 Working range Z mm: 8 - 80 BH17 autonomous spindle unit Configuration: 10 autonomous vertical spindles with 32 mm spacing, with tool holder system, of which: - 5 arranged in X-direction - 5 arranged in Y-direction 3 independent horizontal spindles, arranged in the X and Y directions, equipped with the tool holding system, of which - 2 double outputs arranged in the X-direction - 1 double output arranged in Y-direction 1 sawing unit with saw blade diameter 120 mm, clockwise rotation, fixed working direction in X-direction Key features: Saw blade Ø 120 mm Max. cutting depth: 25 mm Cutting thickness: 4 mm Clockwise rotation of the tools - tool fastening by screws Vertical pneumatic unlocking The control unit is designed to accommodate the electrospindle. ...

SPECIFICATIONS: Dimensions of the work table mm: 1,800 x 1,600 with two working areas 02 Automatic tool changing spindles Electrospindle type ISO 30 12 tool changing stations Copy milling machine 02 drilling units (13 vertical, 2+2 horizontal) 02 Becker vacuum pumps with 250 m3 Electrical control cabinet

SECOND-HAND WORKING CENTER 4 AXIS BIESSE MOD. 37 XL - working dimension X 6000 - work dimension Y 1850 - work dimension Z 180 - 1 router - power router Kw 12 - C axis interpolating - tool clamping system HSK F63 - tool changing positions 21 - vertical drilling spindles 20 - horizontal drilling spindles X 6 - horizontal drilling spindles Y 2 - pod and rail table - n. 10 consoles - vacuump pump 250 m3/h - ATS - CE RULES (YEAR 2004)

BIESSE AKRON 1440 NC Control Panel Numerical control with 10" monitor Plate height: 10 to 60 mm Roll edge thickness: 0.4 to 3 mm Strip edge thickness: 0.4 to 10 mm Minimum plate length: 140 mm Minimum plate width (at 140 mm length): 85 mm Minimum panel width (at 250 mm length): 50 mm Chain feed speed: 12 m/min Two additional glue trays

CNC machining center - BIESSE SKIPPER V 31 Working range X 2500 Working range Y 900 Working range Z 70 Main motor kW 4.5 Vertical drilling spindles 10 Machine Table Pass-through Device Special Material Clamping System Toothed Gripper - Vertical working area: yes BIESSE BIESSEWORKS Software BIESSE BH 17 yes Number of electrospindles 1 Number of revolutions max/min 24000 ISO 30 Tool Holder Horizontal drilling spindles in the X axis 4 Horizontal drilling spindles in the Y axis 2 X-direction sawing unit Safety device Enclosed cab CE marked: yes Total connection capacity kW 12 Standby still connected

It works without any problems, although it requires service and adjustment. You need to program the inverter, set the aggregates to make corners and seal the glue tank, it sells as the price is negotiable, I will consider any proposal

BIESSE TechnoLogic through-hole drilling machine Drilling on 4 sides

BIESSE ROVER A 3.40 machining centre Working Range X: 3060mm Working range Y: 1260 mm Working range Z: 150 mm Number of electrospindles: 1 Main motor 12 kW Tool magazine slots: 18 Vertical drilling spindles: 14 Machine Table: Traverse Table Software: BIESSE BIESSEWORKS ADVANCED + additionally on board Machine control: BIESSE XP 600 - Manual control panel: Yes Fabric stands: yes ( new suction cup rubbers ) - BIESSE ATS: Yes Fixed mounting points for chiller: yes Material clamping system: HSK-F63 Horizontal drilling spindles in the X-axis: 4 Horizontal drilling spindles in the Y axis: 2 Sawing unit: in X direction - Boom Design: Yes Number of traverses: 6 Vacuum pump: Yes Vacuum pump capacity m³/h: 90 - CAD (.dxf) reading interface: yes

5 axis CNC Wood Machining Center Table size 3280x1580 mm X,Y,Z axis speeds 80,60,20 mm/min Software Bsolid

Code: 0218 Brand: BIESSE Model: ROVER 18 - CE Standard CNC working center with 3 controlled axis - CE Standard Technical data: Working range X axis mm 2310 mm - Y axis mm 710 - stroke Z axis mm 90 N ° 6 worktables Boring unit composed of n° 12 vertical spindles - n° 4 horizontal spindles - Motor power Hp 2,3 Router HSD Hp 5 - Max speed 24.000 rpm Bevel gearbox unit Vacuum pump 40 m3/hour Working pressure 6 bar Installed electric power 10 Kw Suction port diameter mm 200 Numerical control CNI NC481: Monitor 9 " Multiscreen: a special softkey is constantly enabled to allow the passage of the AUTOMATIC or MANUAL operating environment, to the PUBLISHING environment for writing and editing of the programs, while the machine works, all the programming operations , insertion and modification of tool data can be performed , total graphics, PLC debugging Programming: t ...

Key data: 3100 mm, 2205 mm, 170 mm

BIESSE ROVER K FT machining center Manufacturer: BIESSE Model: ROVER K FT Year of production 2017 Additional information: Electrospindle: 1 pc. Main engine: 9 kW Tool magazine: 14 positions Vertical drills: 10 pcs. Machine table: raster Software: BIESSE B_SOLID Number of revolutions: max. 24,000 rpm Handles: HSK-F63 The machine is in very good technical condition. You can see it at work. If you are interested, I will send you the price, additional technical data and photos.

Technical details: - Premilling Unit - Corner Rounding Unit - Maximum panel thickness: 65 mm - Operating Units: 9

SPECIFICATIONS: Working area: 3400 x 1300 mm Z 155 X - Y C-axis Main engine: 9 Kw 15-fold tool changer 8-fold clamping system Vertical/horizontal drilling

Control NC400 Plus Travel length min/max 205/3.200 mm Travel width min/max 120/1.200 mm Drilling area in Y 120/608 mm

Dowel drilling machine Biesse type Techno Logic Specifications: • Year of construction: 04/1994 • Working width (mm): 3200 • 7 supports from below: with 2 drilling units each • 2 top-down supports: with 2 drill units each • Drilling support: 1 right and 1 left horizontal

SECOND-HAND CNC WORKING CENTER 4 AXIS BIESSE MOD. ROVER 24 S 6.5 - Working dimensions: X = 3000mm ; Y = 1350mm ; Z = 155mm - Tool changer 9 slots - ISO 30 - Drilling head 16 spindles - Saw blade group - Axe C - Vacuum pump Becker 100 mc/h - N. 6 working consoles - 7.5 bars - CE (year 2001)

Processing Manufacturer: Biesse Model: Rover 335 ATC Working range: approx. 3200mm x 950 mm Drilling spindles vertical: 24 pcs. Drilling spindles horizontal: 10 pcs. Milling unit: 7.5 KW

I sell a 4-axis CNC machining center Biesse Rover 24L with truss table Year of construction 2004. Configuration: 4-axis main spindle HSD freshly fully repaired / Water-cooled RS1600 Tool magazine 7 positions ISO30 on the head 1x groove saw X-direction Drill head 14+4+2 drilling spindle Usable work surface 4500x1330mm. 2 work surfaces, 4 clamping zones Automatic system of Central Lubrikazion Combined power 35kW XDNC 2.01 software with operating instructions. Pump Becker 250/300 m3/h. 5,5KW Additional vacuum for stencil work or additional clamping devices. Good condition. Available from stock. Need for repair: handles on the truss table, Rotazion from ISO30 magazine on the head

Continuous drilling rig Biesse Techno Logic Masch. No 873/90 Position 1: Loader BIESSE-TECHNO LOGIC Item 2: Transfer BIESSE-TECHNO LOGIC Item 3: Transfer BIESSE-TECHNO LOGIC Item 5: Continuous drilling machine BIESSE-TECHNO LOGIC Item 6: BIESSE-TECHNO LOGIC horizontal continuous drilling rig Item 7: Transfer BIESSE-TECHNO LOGIC Item 8: Transfer BIESSE-TECHNO LOGIC Position 9: Brushing machine BIESSE-TECHNO LOGIC Item 10: Unloader BIESSE-TECHNO LOGIC Weight approx. 4 to L x W x H: 6.0 x 2.4 x 2.5 m Year of construction 1990 Dismantling by buyer The plant is in good condition, ready for operation Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

SPECIFICATIONS: Machining center with grid table Working range X mm: 4300 Working range Y mm: 2200 Working range Z mm: 170 Milling unit - Electrospindle HSK F63, KW 13.2 Drill head type BH10 vertical/horizontal 2 vacuum pumps, each 250 m3 Automatic loading and unloading system Scissor lift Length unloading carpet mm: 4.940 Automatic unloading Automatic lubrication system Additional workstation for displaying and printing labels Revolver tool magazine with 16 positions

I sell a double-sided CNC machining center Biesse Skipper 100 Year of construction 2006. Very productive and fast. Automatic entry table. Working length 90-3000mm Working width 70-1000mm Working height 8-60mm Configuration per page: Milling head 3.5 kW, 7000-18000 rpm 29+8+2 drill heads 1 groove saw D.150mm direction X Software BiesseWorks. CD included. Condition very good ! Fully functional. Automatic system of central lukrikazion and extraction hoods. Complete with safety barriers, transport elements and CE points. CE certificate and full documentation included Need for repair: 1 pcs. safety carpet

TECHNICAL DATA: Boring spindles: 39 Interaxis between spindles mm: 32 Pneumatic clamping: 4 Total connection KW: 4,6

Biesse Italy, Rover 22 CNC Machining Center Built in 2001 SN 07498 Workspace 4 axes X-axis 3060 mm Y-axis 1080 mm Z-axis 155 mm 6 consoles with 18 vaccum suction holder 4 pneumatic bakelite rods for lifting the plate Vertical electric spindle 7.5 kW with automatic tool change, ISO 30 cone Automatic tool change 7 positions on the working head Drill head with 20 spindles arranged as follows: 7 vertical in X-axis 7 permeable to Y-axis 4 horizontal in X-axis 2 horizontal in Y-axis Groove saw 120mm Safety tread mats 110 m3 / h vacuum pump CE marked Weight 3500 Kg Technical information subject to reservation

Machine Size 2800 x 1940 x 2000mm Min. Size of machined panel 200 x 35 x 8mm Max. size of machined panel 3200 x 900 x 60mm

Working area 2500x900x70 mm Software BIESSEWORKS Machine control PC control Rotation speed max rpm 18000 Number of Horizontal spindles 10 With Grooving spindle

BIESSE - Multi-spindle drilling machine Model BEAVER Year 1982 Manufacture Biesse S.p.A Italy S/N 312/82 Technical data 1 horizontal drilling unit, 21 spindles 2 vertical drilling units, 2x10 spindles, pitch 32 mm horizontal Drilling motor 2.2 kW Vertical drill motor 2 x 1.5 kW Spindle speed 2800 rpm Blade dimensions 10x1.5 mm Operating pressure 0> 6 MPa 7 pcs. pneumatic answers with kSsi control levers Weight 865 kg L x W X H 280cm x 150cm x 150cm

Dowel drilling and drive-in machine Biesse type F/S Technical data: • Drill head: 21 spindles • Glue guns: 6

Working size X 3000 ,Y 1000 mm Thickness 60 mm Vertical Boring spindle 29 Horizontal boring spindles in X 8 Horizontal boring spindle in Y 2