Category 812: presses: sheetfed 12-color

Heidelberg PM 74-4-P3 4 colour perfecting press Year: 2002 Classic Center 118 million impressions Easyplate Low pile delivery Perfecting 2+2 / 4+0 Auto roller wash Auto blanket wash Auto impression cylinder wash Weko T66 Plus powder spray device In production Available: February 2019 more

-Light 115 cms. -Year 1979, Photocells, air bed -Standard original programmation, spare knife -All tools and accessories more

QAPC, alcolor dampening, cp tropic, high pile more

alcolor dampening more

SAPC, alcolor dampening, PQC, cocking, chromed impression cylinders more

automatic foil stamping and die-cutting machine more

PQC, SAPC, cocking, alcolor dampening, chromed impression cylinders more

For sale by auction the next 13 November at 10:30 in Leno, from company active in the production of Windows and doors Available detailed catalogue and expertise of all machinery and items in the lot. Check out our website to download call for participation and mercury auctions complete catalogue, or contact us at 030 7751645 9-13 office hours, 14:18. Work center Hyundai 500-SPT/V30 TD including closet with tools (1998) work center Vimacchine SPT 500 d (2003) machining center Chiron FZ 12 W Magnum Dah Lih MCV-mo ... more

Laminating thickness veneer/ thermoplastic films/ decoration papers: 0.3-0.7/ 0.25-1mm/ 80-120g/m², top/ bottom heating plates dimensions: 3400x1500/ 3400x1700mm, pressing force: 3000kN, specific pressing force: 73N/cm², heating output: 70kW, max. heat requirement: 100.000kcal/h, film roll diameter: 600mm, film width: 1200-1400mm, length: 12930mm, width: 2500mm, height: 2940mm, weight: 30t, machine was regularly maintained. more

hydraulische Lochplattenpresse - Arbeitsbereich 1050 x 750 mm - 4 Presszylinder, Hub 70 mm - Winkelseiten-Höhe 140 mm more

hydraulic hole plate press -Work area 1050 x 750 mm -4 press cylinder, stroke 70 mm -Angle side height 140 mm more

Eccentric press ex Center Press Press 15 to pressure power punch Eccentric press with 15 to pressure performance more data: see data plate (last image) The clamped tool is not. A pneumatic control unit must be installed (not present), or again Dismantling the pneumatics on tripping over linkage. Was to test the compressed air cylinder pressurized. the mechanism is triggered and the machine stamped perfectly! State and execution: see images more

Exzenterpresse Excenterpresse Presse 15 to Druckleistung Stanze Exzenterpresse mit 15 to Druckleistung weitere Daten: siehe Typenschild (letztes Bild) Das eingespannte Werkzeug ist nicht dabei. Eine pneumatische Ansteuerung muss angebracht werden (nicht dabei), oder wieder Rückbau der Pneumatik auf Auslösung über Gestänge. Zum Testen wurde der Zylinder mit Druckluft beaufschlagt; die Mechanik löste aus und die Maschine stanzte tadellos! Zustand und Ausführung: siehe Bilder more

Simon drill grinder, drill up to 50 mm grinder grinding machine used tool and Cutter Grinder drill grinder Fabr. Simon Basic type: L 15 Max drill diameter: 50 mm The drill bit grinding unit is located on the left side Pictured included: like in the photos. Contact person Mr. Mueller see also our over 200 more deals at. (Changes and errors in the technical data, information and prices and subject to prior sale!) more

Eccentric press The previous owner 40to printing performance on sale said it could be "just" 30to. Unfortunately no information to find. The notching tool can get the buyer to do this. Works perfectly State and execution: see images Contact person Mr. Mueller see also our over 200 more deals at. (Changes and errors in the technical data, information and prices and subject to prior sale!) more

Stehendbogenpressauslage steel; 2 piece in the package; State as is; unaudited. more

T R 52.2/4; good condition; Main machine in 2015 new rollers; Round pile feeder; 1.werk 4 pockets. 2.werk 4 pockets. Display SAK 56.6; various accessories; State as is; tested for function. more

automatische BallenpresseHersteller: PAAL Typ: PACOMAT V Baujahr: 2000 technische Daten: Presskraft: 50 t Antriebsleistung: 45 kW Durchsatzleistung: ca. 240 m³/h Einfüllöffnung: 1.250 x 950 mm Abbindung: 3-fach horizontal Kanalformat: 700 x 1.000 mm (H x B) Ballengrösse: 700 x 1.000 x Länge in mm Ballengewicht: bis zu 500 kg Maschinengewicht: ca. 9.100 kg more

Automatic baler Producer: PAAL Type: PACOMAT V Year of construction: 2000 technical data: Pressing force: 50 t motor power: 45 kW capacity: approx. 240 m³/h feeding opening: 1.250 x 950 mm automatic binding: 3 x horizontal channel size: 700 x 1,000 mm (H x W) bale size: 700 x 1.000 x length in mm bale weight: up to 500 kg machine weight: approx. 9.100 kg more

Offer consists of: MBO folding machine T530-1-43/4F Number of pockets / swords: 4 pockets 1 sword On request, we can organize for you the following points: Packing, loading, transport (by ship or airplane) including customs clearance more

automatische Ballenpresse Hersteller: Avermann Typ: AVOS 1810 Baujahr: 2004 technische Daten: Presskraft: 100 t spezifische Presskraft: 12,12 Kg/cm² Einfüllöffnung: 1.800 x 1.000 mm Kanalformat: 1.100 x 750 (B x H) Antriebsleistung: 2 x 45 kW, 200A vollautomatische Abbindung 4-fach vertikal, Durchsatzleistung: - bei 30 kg/m³: ca. 12,1 t/Stunde - bei 50 kg/m³: ca. 16,0 t/Stunde - bei 100 kg/m³: ca. 23,2 t/Stunde Ballengewichte bis zu ca. 800 kg Ölbehältervolumen: ca. 2.000 Ltr. Tr ... more

Automatic baler Manufacturer: Avermann Type: AVOS 1810 Year of construction: 2004 technical data: Pressing force: 100 t specific pressing force: 12.12 kg/cm² Filler: 1.800 x 1.000 mm Channel format: 1.100 x 750 (W x H) Power: 2 x 45 kW, 200A fully automatic setting 4 x vertically. Throughput capacity: -at 30 kg/m³: approx. 12,1 t/hour -at 50 kg/m³: 16,0 tons/hour -at 100 kg/m³: 23,2 tons / hour Bale weights up to approx. 800 kg Oil tank volume: approx. 2.000 LTR. Transport dimensions ... more

baler manufacturer: PAAL Type: HAKO 30 SO Year built 1987 technical data: Pressing force: 30 t Power: 22 kW Filler: 1.800 x 1.020 mm Hydraulic 2 x upper box Cap Size: 750 x 1,100 mm Setting: 4 x vertical and 2 horizontal fold by hand Bale weights: up to approx. 500 kg Machine weight approx.: 14.000 kg more

gebrauchte Ballenpresse Hersteller: PAAL Typ: HAKO 30 SO Baujahr 1987 Technische Daten: Presskraft: 30 t Antriebsleistung: 22 kW Einfüllöffnung: 1.800 x 1.020 mm Hydraulisch 2-facher oberer Kastenverschluß Format: 750 x 1.100 mm Abbindung: 4-fach vertikal und 2- fach horizontal von Hand Ballengewichte: bis zu ca. 500 kg Maschinengewicht ca.: 14.000 kg more

Max Web width 340 mm Max print area (mm) full rotation: 430 (L) x 330 (w) 5 pressure sections + 1 flexo + stamping Max printing speed 300 RPM approximately 130 m / min 3-phase power, 30 kW more

The stream delivery SAB Bograma 550 D uses multiple benefit productions. Formats from A3 to minimum 30 x 30 mm can thus be interpreted in the shingled stream. Round belt feeder for optimized products acquisition Powered upper straps with format-independent transport carpet Prefixes and totalizing counter Motor-driven height adjustment Max working width 550 mm Max speed 200 m / min Min. speed 20 m / min more

C-frame Einstanderpresse Presse WMW Leistung: 3 Ton Einbauhöhe: 355 mm Hub: 280 mm Stosselgeschwindigkeit: 0,1 m/sek. Maschine Gewicht: 400 kg Ursprungsland Germany more

C-frame debut er press press WMW Power: 3 sound Height: 355 mm Stroke: 280 mm Stosselgeschwindigkeit: 0.1 m / sec. Machine weight: 400 kg Country of origin Germany more

Hydraulic press brake LVD Conventional Bending length: 3,050 mm Capacity: 200 ton Control: Hand + foot switch Back gauge: 800 mm Stroke length: 150 mm Throat depth: 250 mm Stand width: 2.550 mm Equipped with: -Rear protection -Hand + foot control panel -Set tools Country of origin: Belgium Engine capacity: 14.5 kW Machine weight: 10.000 kg Machine Lxwxh: 380 x 170 x 300 cm more

CNC press brake HACO Bending length: 3.600 mm Capacity: 100 ton CNC control: ATL 550 Controlled axes: X, Y1, Y2 rear stop: 600 mm Stroke length: 120 mm Throat depth: 250 mm Stand size: 3,150 mm Equipped with: -Crowning -Rear protection -Hand + foot pedal -Operating instructions Country of origin: Netherlands Engine power: 5,5 kW Machine weight: 7,000 kg more

CNC press brake HACO Bending length: 1,600 mm Capacity: 60 ton CNC control: BC40 graphics Controlled axes: X, Y1, Y2 + camber Trailing stop: 750 mm Length of stroke: 100 mm Throat depth: 200 mm Stand width: 1100 mm Equipped with: -Rear protection -Hand + foot pedal -Operating instructions Country of origin: Netherlands Engine performance: 5.6 kW Machine weight: 4,000 kg more

Screenprinting waterless offset Hot foil Flexodruckwerk relief embossing Diecutting more

Screenprinting waterless offset Hot foil Flexodruckwerk relief embossing Diecutting more

Channel baler Kampwerth (Presto), with new cylinder, excluding funnel (cone) Type HPK 20/50 Operating hours 6834 Press power 50 t Motor power 15 kW Year of construction 1999 Technical specifications: Manufacturer Presto GmbH & Co. KG Type HPK 20/50 Year of construction 1999 Operating hours 6834 Press power 50 t Motor power 15 kW Cycle time 54 s Feeding opening 700 x 1200 mm Channel cross-section 700 x 750 mm Throughput rate with 35 kg/m³ 1,8 t/h Throughput rate with 60 kg/m³ 2,9 t/h Throughput rate ... more

Kanalballenpresse Kampwerth (Presto), mit neuem Zylinder, ohne Trichter Typ HPK 20/50 Betriebsstunden 6834 Presskraft 50 t Motorleistung 15 kW Baujahr 1999 Technische Daten Hersteller Presto GmbH & Co. KG Typ HPK 20/50 Baujahr 1999 Betriebsstunden 6834 Presskraft 50 t Motorleistung 15 kW Zykluszeit 54 s Maße Einfüllöffnung 700 x 1200 mm Kanalquerschnitt 700 x 750 mm Durchsatzleistung bei 35 kg/m³ 1,8 t/h Durchsatzleistung bei 60 kg/m³ 2,9 t/h Durchsatzleistung bei 100 kg/m³ 4,8 t/h Ballengewic ... more

Press container Avermann 20 P/A Built in 2006 Content: 20 m3 Pressing force: 34 ton Entladetur: Top hinged Recording: Hook more

Very good condition 57x82 more

Pneumatische Eckverbindungspresse mit verschiedenen Stanzmessern more

Pneumatic corner connection press with various cutting blades more

ENGEL Spritzgiessmaschine mod. ES 200-40 HL / Bj. 94 / 400 KN / Schnecken Ø 30 mm / Dosierung 140 / Schnecken 20-480 / Hubvolumen 98 cm³ / Düsenweg 200 mm / Spritzdruck 1450 – 2000 bar / Stunden : 98.000 / Angusspicker / guter Zustand fe.gi.maschinen.sbg.at ENGEL injection molding machine mod. ES 200-40 HL / year 94 / 400 KN / screws Ø 30 mm / dosage 140 / screws 20-480 / stroke volume 98 cm³ / nozzle path 200 mm / injection pressure 1450 - 2000 bar / hours: 98.000 / gate picker / good condition fe.g ... more

ENGEL injection moulding machine mod ES 200-40 HL / BJ. 94 / 400 KN / snails Ã? dosage 140 / slugs 20-480, 30 mm / stroke volume 98 cm³ / nozzle way 200 mm / spraying pressure 1450-2000 bar / hours: 98,000 / sprue picker / good condition Fe.gi.Maschinen.SBG.at Angel injection molding machine mod ES 200-40 HL / year 94 / 400 KN / screws Ã? 30 mm / overtook 140 / screws 20-480 / stroke volume 98 cm³ / nozzle path 200 mm / injection pressure 1450-2000 bar / hours: picker 98,000 / gate / good condit ... more

-Pharmaceutical folder with 6 buckles -Main Unit : Model: T36/6 F.2- F 36M -Stacker STA 30 available or normal delivery -Serial n. 36369, High pile feeder -Max Sheet Size: 14.17? x 25.5? - 360x650 mms. -Min Sheet Size: 3.15? x 3.94?- 80x100 mms. -Min folding length: 3/4 ”- 20 mms. -Max speed : 40,000 Sheets per hour -Available immediately, all manuals and accessories more

Machine no.: 7711307 more

Automatic laminator Paperplast DRY Year 1994 , Max size 72 x102 cms. -Speed from 10 to 30 m/min. , High pile, High size diameter cylinders -Thickness from 100 to 400 grms. Automatic stacker , air suction feeder, rewinding system, oscillating blade -In production in Italy more

Machine no.: 71407661 more

-Four colours STRAIGHT machine max paper size 37x52 cms. -Year 2002, 39 mil. impressions -Alcolor dampening with refrigeration system -Autoplate, Cptronic, CPC 1.04, Automatic washing devices, plus version -Plate punch and bender,Powder spray, in production -Complete with all manuals and accessories, All photos attached more

Machine no. 612326 more

HEIDELBERG SM 52-4 (2003)-> 60 copies my Classic Center CPC, flat Alcolor Autoplate all washing devices 13000 speed c/h The machine is in production in Italy No damage on cylinders, nice condition Availability: Immediately more

4 up thermal CTP system Agfa Avalon N4-30 (screen 4600) Aged 2015 SA L 4600 Agfa-Azura C 95 clean out unit ST 95 EX plate stacker Only 12,000 plates produced RIP AGFA prepress Machine still in production Available November 2018 Price on request more

HEIDELBERG SM 74-4 pH (1999)-> 167 copies my CPC 1.04 cpTronic Alcolor Autoplate improvement 2/2 The machine is in production in Italy No damage on cylinders, nice condition Availability: Immediately more