5710 results

similar results found in category trucks/cement mixers

Category: 2406 trucks/cement mixers
New in: used
Location: Land-ch CH 9240 Uzwil, Sternenstrasse 4
Seller: MJS-LINE GmbH

REPLACEMENT KNIFE FOR POLAR MOHR 66 Manufacturer / Origin: Polar/ Germany (EU) more

Category: 2406 trucks/cement mixers
New in: used
Location: Land-ch CH 9240 Uzwil, Sternenstrasse 4
Seller: MJS-LINE GmbH

REPLACEMENT KNIFE FOR POLAR 55 EM Manufacturer / Origin: Polar/ Germany (EU) more

Category: 2406 trucks/cement mixers
New in: 2006
Price 14.000 €
Location: Land-de DE 40721 Hilden, Neustraße 45
Seller: Achte display system GmbH

Jungheinrich Vierwegestapler, Seitenstapler, Langgutstapler ETV Q20 Baujahr 2006 2 Tonnen Fährt vorwärts, rückwärts und diagonal Hubhöhe 6260 Gabellänge 800 Gabelbreite von 560-1680mm Länge 2060mm Breite 1720mm Höhe 2650mm UVV 2019 immer gewartet 5630 Betriebsstunden Der Stapler ist in gutem gebrauchsfähigem Zustand. Eine Garantie wird allerdings nicht gegeben. Der Stapler kann jederzeit nach Terminvereinbarung besichtigt werden. Verkauf geschieht ab Standort. Ladegerät ist dabei. Ein Tra ... more

Category: 2406 trucks/cement mixers
New in: 2006
Price 14.000 €
Location: Land-de DE 40721 Hilden, Neustraße 45
Seller: Achte display system GmbH

Jungheinrich four way forklift, Sideloader, long good stacker ETV Q20 year 2006 2 tons Moves forward, backwards and diagonally Lifting height 6260 Fork length 800 Fork width of 560-1680 mm Length 2060mm Width 1720mm Height 2650mm UVV 2019 always maintained 5630 operating hours The truck is in good useable condition. However, a warranty is not given. The stacker can be visited at any time by appointment. Sales happens from site. Charger is. Transport can be arranged but comes at the expense of the buy ... more

Category: 2406 trucks/cement mixers
New in: 2012
Price 5.050 €
Location: Land-de DE 40721 Hilden, Neustraße 45
Seller: Achte display system GmbH

Sold the Lasermax laser used Maxi air filter system and 3 replacement lenses, 22 V, Hz 50, year 2012, which is laser hardly and the laser bulb worked only a few hours. The laser was overhauled last year at the plant and works absolutely perfectly. A visit is possible at any time. About 300 kilograms. more

Category: 2406 trucks/cement mixers
New in: 2015
Price used machinery auction RESALE 900 €
Location: Land-de DE 17268 Templin
Seller: Industrie Auktionshaus Bickel KG

Jungheinrich, Typ: HC 110 Bj./EZ: 2015, Ident.-Nr.: 82502802 km-Stand/Bstd.: 178 Bstd. Nenntragkraft: max. 1.000 kg, mit integriertem Ladegerät more

Category: 2406 trucks/cement mixers
New in: 2015
Price used machinery auction RESALE 900 €
Location: Land-de DE 17268 Templin
Seller: Industrie Auktionshaus Bickel KG

Jungheinrich, type: HC 110 BJ. / EZ: 2015, ident.-No.: 82502802 km stand/h.: 178 h. Nominal capacity: 1,000 kg, with integrated battery charger more

Category: 2406 trucks/cement mixers
New in: used
Price used machinery auction RESALE 400 €
Location: Land-de DE 17268 Templin
Seller: Industrie Auktionshaus Bickel KG

Edelstahl more

Category: 2406 trucks/cement mixers
New in: used
Price used machinery auction RESALE 400 €
Location: Land-de DE 17268 Templin
Seller: Industrie Auktionshaus Bickel KG

Stainless steel more

Category: 2406 trucks/cement mixers
New in: 2009
Price 17.000 €
Location: Land-de DE 64404 Bickenbach, Breithauptstr. 1
Seller: H & N Energien GmbH

Container - power generator of 125 kVA manufacturer: Karunaratne Type: 125 DID/4 p/w/E/C Nominal power (PRP): 125 kVA Power factor: cos phi 0.8 Voltage: 400 / 231 V Frequency: 50 Hz Rated speed: 1500 min Execution class: G2 Control: K-EA-NULS1/SY/NP automatic and parallel operation with overlapping synchronization Day tank: Krampitz 100 litres Storage tank: Fiberglass 1000 l Fuel consumption: 29.3 l / h Year of build: 2009 location: Bickenbach / Germany #Stromaggregat #contaner #genset #notstrom # ... more

Category: 2406 trucks/cement mixers
New in: 2015
Location: Land-cz CZ 60200 Brno, Janska 12
Seller: AMARON s.r.o.

GO: 2018 Spindle bearings were replaced in June 2018 Motor is a replacement motor with servo amplifier 7.5 kW With hydraulic turret with 8 positions Control System: Fagor 8055iFCL-TC Turning over bed: 530 mm Turning over cross slide: 265 mm Turning length: 1520 mm (Z-axis 1415 mm) Spindle bore: 80 mm Chuck: 10 inches - manually Spindle speed: Max. 2000 rpm Spindle power: 11 kW (Fagor engine) Accessories: Fixed Steady rests Movable Steady rests Adapter for rear chuck + 4 jaws 12 inches  ... more

Category: 2406 trucks/cement mixers
New in: 1997
Price 620 €
Location: Land-de DE 21698 Harsefeld, Elsterhorst 8
Seller: eth Ericus Transport u. Handelsges.mbH

Wir bieten hier zum Kauf an: Elektro Niederhubwagen, gebraucht Technische Daten: Marke: Jungheinrich EJE R 20G-20-115-54 Typ: EJE R 20G Baujahr: 1997 Betriebsstunden: 7274,8 Std. Hubhöhe: 200 mm Gabellänge: 1.000 mm Tragfähigkeit: 2.000 kg Batterieanzeige: 24V Ladegerät: 24V 40A Die Batterie wurde überholt und ist funktionsfähig. Verkauf unter Ausschluss jeglicher Garantie und Sachmängelhaftung. more

Category: 2406 trucks/cement mixers
New in: 1997
Price 620 €
Location: Land-de DE 21698 Harsefeld, Elsterhorst 8
Seller: eth Ericus Transport u. Handelsges.mbH

We offer for sale: Electric pallet trucks, used Technical data: Brand: Jungheinrich EJE R 20G-20-115-54 type: EJE R 20 G Year of construction: 1997 Hours of operation: 7274,8 hours Lifting height: 200 mm Fork length: 1,000 mm Capacity: 2,000 kg Battery: 24V Charger: 24V 40A The battery has been overhauled and is functional. Sales, excluding any guarantee and liability for defects. more

Category: 2406 trucks/cement mixers
New in: 2011
PriceVS request quote
Location: Land-de DE Mainz
Seller: Maynards Europe GmbH

mit option GE 455 DZ Nenntragfähigkeit 1600kg max lastabstand 600mm max lasthöhe 4500mm more

Category: 2406 trucks/cement mixers
New in: 2011
Location: Land-de DE Mainz
Seller: Maynards Europe GmbH

with option GE 455 DZ Nominal load capacity 1600 kg Max load distance 600 mm Max load height 4500 mm more

Category: 2406 trucks/cement mixers
New in: 2006
Price 6.900 €
Location: Land-de DE 40764 Langenfeld
Seller: Tischlerei Bracht GbR

Electric lift trucks, 1,6T, electric stacker, 4, 7 m lifting height Only 191 hours from Carpenter. Lifting capacity 1600 kg (up to 2500 mm), 1000 kg up to 3500 mm, about 650 kg Height approx. 4700mm, trip lex mast Battery 24 volt / 270Ah hawker from 12/2005 Fork length 1150 mm, fork outer width 560 mm With Security button on the drawbar, which automatically reverse on contact Battery capacity indicator Controls forward, backward, up and down are mounted on the shaft for Horn, silent speed, 1 key Opera ... more

Category: 2406 trucks/cement mixers
New in: 2003
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

Battenfeld TMS 2100-1330 Year of construction: 2003 Injection unit: Screw diameter: 55 mm Displacement: 653 cc Injection pressure: 2041 bar Shot weight: 594 g / PS Clamping unit: Clamping force: 210to. Clear width between columns: 570 x 570 mm tool clamping plate sizes: 840 x 840 mm Ejector: hydraulic Clamping unit: knee lever Control: Unilog B4 Additional equipment: EUROMAP Robot interface Control hot-channel x 12 Central lubrication unit Automatic adjust of the height of the form Proport ... more

Category: 2406 trucks/cement mixers
New in: used
Location: Land-pl PL
Seller: TDMW.PL Igor Kaliniec

Amada laser cutting system Type: Flying optics Working range: 3000 mm x 1500 mm Laser power 4000 Watt CNC Fanuc Year of manuf. 2001, but this machine was working at Amada's showroom as demonstration machine until 2004. It was bought from Amada in 2004, so the machine works on production only from 2004. Very good condition - see pictures! Operational hours turbo about 18.000 h Operational machine approx. 54.500 h Cutting: - black steel: up to 20 mm - stainless steel: up to 12 mm - aluminium: up to 8 ... more

Category: 2406 trucks/cement mixers
New in: 2000
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

BATTENFELD HM 6500/5400 Year of construction: 2000 The hybrid, high-speed machine with Battenfeldroboter type: R15 Injection unit Screw diameter: 95 mm Injection pressure: 1689 bar Displacement: 3012 cc Clamping unit Clamping force: 650to. Clear width between columns: 1100x800mm Tool installation high min: 500 mm Tool installation high max: 1100 mm Ejector: hydraulic Clamping unit: hydraulic Control: Unilog 9000 Additional equipment Robot interface 3-core pulling The control of hot chann ... more

Category: 2406 trucks/cement mixers
New in: 2001
Location: Land-it IT 23801 Calolziocorte, via serta 23
Seller: Industrialbay

BRAND: MAZAK MODEL: VTC-200B YEAR: 2001 STROKE AXIS X, Y, Z / Travel X, Y, Z: 1,120 x 510 x 510 mm DIMENSIONS TABLE / Bench dimensions: 1,460 x 510 mm Control / Control: Mazatrol CHUCK / Spindle: 10,000 rpm / min POWER / Power: 15 Kw ADVANCEMENT QUICK X, Y, Z / Rapid travel X / Y / Z: 30 m / min MAX WEIGHT ON TABLE: 800 Kg TOOLS / Tools: ISO 40 TOOL CHANGING TIME: 5 sec WEIGHT / Weight: 6,100 kg DIMENSIONS / Dimensions: 4.500 x 3.100 x H 2.700 mm TOTAL POWER: 37.2 KVA more

Category: 2406 trucks/cement mixers
New in: 1986
Location: Land-de DE 63165 Mühlheim am Main, Carl-Zeiss-Str. 8-10
Seller: H.-G. Zach Werkzeugmaschinen GmbH

Type of machine: Vertical wood beld saw with integrated suction, Manufacturer: FAMA, Model: BSM 640, Year of construction: 1986 Condition: very good,. Type of offer: used machine, , Specifications:,. Outreach: 630 mm, Max cutting height: 380 mm. Table: 885 x 600 mm, swiveling, Drive: 2.2 kW Comment:. with integrated suction,. stable stop, Precision roller guides, Replacement belts, Machine moveable on rolls, Machine lamp, Weight: 350 kg , The machine is in a very good shape and ready for Oper ... more

Category: 2406 trucks/cement mixers
New in: used
Location: Land-de DE
Seller: IDS Trade GmbH

ROTO T 2/96 THE ROTARY AUTOMATIC MOLDING MACHINE ON 96 STATIONS FOR CASTING OF POLYMERIC TRAFFIC JAMS OF THE MADE FOAM STRUCTURE (FOR WINES AND FOR HARD ALCOHOLIC BEVERAGES), CAPABLE TO WORK AT THE SAME TIME WITH 2 VARIOUS MATERIALS / COLORS Eqb8ve2 Main technical characteristics â?¢ A rotary table with 48 workstations in two levels, everyone with a double holder â?¢ holders with linear + rotary pneumatic opening / closing, calculated on 96 single compression Arnold from stainless steel, wi ... more

Category: 2406 trucks/cement mixers
New in: used
Location: Land-de DE
Seller: IDS Trade GmbH

ROTO T 2/96 THE ROTARY AUTOMATIC MOLDING MACHINE ON 96 STATIONS FOR CASTING OF POLYMERIC TRAFFIC JAMS OF THE MADE FOAM STRUCTURE (FOR WINES AND FOR HARD ALCOHOLIC BEVERAGES), CAPABLE TO WORK AT THE SAME TIME WITH 2 VARIOUS MATERIALS / COLORS Eqb8ve2 Main technical characteristics • A rotary table with 48 workstations in two levels, everyone with a double holder • Holders with linear + rotary pneumatic opening / closing, calculated on 96 single compression moulds from stainless steel, with a possibility o ... more

Category: 2406 trucks/cement mixers
New in: 2008
Price 333 €
Location: Land-cn CN Hoofddorp, Siriusdreef 17-27
Seller: Gutenberg Grafishe Machines B.V.

IGEN4 110-XXL REFURBISHED in 2014 Clicks after refurbishment: 5, 6 Mio. IGEN4 110-XXL REFURBISHED in 2014 Clicks after refurbishment: 5, 6 Mio. Performance Rated speed Range depending on paper size: from 110 ipm for 7 "x 7" to 40 ipm for 14.33 x 22.5 " Resolution 4800 × 600 × 1-bit Recommended average monthly volume 200.000-3,750,000 pages per month Line Screens 150, 175, 200, or 300 lpi, all utilizing 256 gray levels Capabilities Printed Sides Duplex Technology Network Interfaces 10/ ... more

Category: 2406 trucks/cement mixers
New in: 2006
Location: Land-at AT 2512 Tribuswinkel, Sängerhofgasse 42
Seller: Lovric Maschinenhandel e.U.

Krauss Maffei KM 1600 - 8100/2700 MX BJ. 2006 Hours of operation: 20.200 h Cylinder injection A: 105 mm 4546 cm³ Cylinder injection q: 90mm 2036 cm³ Replacement cylinder syringe q: 80 mm 1433 cm³ Syringe A core pull 5 hydr. / Pneum. 3. Syringe F core trains 5 hydr. / Pneum. 3. 36 mould heating zones more

Category: 2406 trucks/cement mixers
New in: 1992
Price 13.500 €
Location: Land-de DE Offenburg
Seller: Alexander von Westernhagen

Seitenstapler incl. Langguttraverse weniger als 700 Betriebsstunden – gebraucht - : Preis ab Standort: 13.500.-€ (netto)! Hersteller: OM Fantuzzi Typ: SF 40 L, Seitenstapler SF 4000 MV, Baujahr: 1992 Betriebsstunden: nur ca. 695 Stunden Tragkraft: 4000 kg Plattformbreite: 1400 mm Lastschwerpkt. 700 mm Plattformhöhe: 800 mm Abmessungen Länge 3700 mm Breite 2080 mm Teleskopmast: Hubhöhe: 4000 mm Bauhöhe: 2950 mm Freihub: 800 mm Bereifung: 27.10 - 12 - PR 14 Motor IVECO Diesel 8141 i ... more

Category: 2406 trucks/cement mixers
New in: 1992
Price 13.500 €
Location: Land-de DE Offenburg
Seller: Alexander von Westernhagen

Side forklifts including long freight traverse used less than 700 hours - -: Price from site: â?¬13.500.-(net)! Manufacturer: OM Fantuzzi Type: SF 40 L, Sideloader MV SF 4000. Year of construction: 1992 Hours of operation: only 695 hours Load capacity: 4000 kg Platform width: 1400 mm Lastschwerpkt. 700 mm Platform height: 800 mm Dimensions Length 3700 mm Width 2080 mm Telescopic mast: Lifting height: 4000 mm Height: 2950 mm Free lift: 800 mm Tyres: 27.10 - 12 - PR 14 Engine IVECO d ... more

Category: 2406 trucks/cement mixers
New in: 2016
Price 9.950 €
Location: Land-de DE 72419 Neufra
Seller: Alexander von Westernhagen

Reverse loading lift table, 2 to 3 x 2 m, galvanized version - new -: Price from site: â?¬9.950.-(net)! Manufacturer: Hymo (H + M pallet GmbH) Type: LX20-16/20/1-M Year of constr.: 2016 - reverse loading lift table but never built former price: â?¬ 15.000.-(net) Condition: New Available: available now Location: 72419 Neufra Reverse loading lift table - lifting table category 4 in accordance with EN1570-1 Technical data: Load capacity: 2000 kg Stroke: 1600 mm Height: 305 mm  ... more

Category: 2406 trucks/cement mixers
New in: 2013
Location: Land-de DE
Seller: Sprenger Machinery - René Sprenger

3 piece concrete mixing drums Stetter Type 829 Volume 9 m³ Year of constr.: 2013-12 in very good condition now available Offer and prices are quoted NET ex location Reserved, errors or misrepresentations subject to prior sale, no guarantee or warranty, as seen, lying or standing __________________________________________________________________ A reproduction, re-use, publish and/or copy of this offer by a third party, which were not expressly authorized is prohibited in full! more

Category: 2406 trucks/cement mixers
New in: 1996
Location: Land-it IT 36066 Sandrigo, Via Piave, 7
Seller: Baldin SRL

Electric forklift OM model EU30 : - lift capacity 3000 kg - with fork shiftfer - complete of battery charger At CE norms more

Category: 2406 trucks/cement mixers
New in: 2011
Location: Land-pt PT italy / sicila
Seller: Sprenger Machinery - René Sprenger

1 pcs less used/ good as new concrete mixing plant manufactory: EUROMECC type/model: EUROMOBILE 4 FAST&POWER - 95 year of construction: 2010 fisrt start up in 2011 capacity: 105 cbm/h mixer: double shaft mixer MB 3500/2350 aggregate hoppers: 4 boxes per 20 cbm aggregate wheiging belt 5000kg aggregate charging of mixer by skip cement scale 2000kg water scale 600kg chemical 2X12 liter without silos Control unit: BETONWIN 3 – - Siemens PC, printer, switchboards - complete in a office container i ... more

Category: 2406 trucks/cement mixers
New in: used
Location: Land-it IT 96100 Siracusa, Via Pippo Fava
Seller: C&L INTERNATIONAL LTD

OVEN for UW 50/70 FORMAT YEAR 2006 EXCELLENT CONDITION with REPLACEMENT LAMP more

Category: 2406 trucks/cement mixers
New in: 2009
Location: Land-gr GR
Seller: Sprenger Machinery - René Sprenger

1 pcs used concrete mixing plant manufactory: Sicoma type/model: SICOMA / Rousmenis / Spoulos Kostas year of construction: 2009 capacity: 120 cbm/h mixer: double shaft mixer SICOMA MAO 5000/3350 aggregate hoppers: 5 boxes per 30 cbm cement scale 1500kg water scale 700kg chemical 2X25 silos Control unit: Spoulos Kostas - in a office container installed - produce not more that 30.000 cubic meters until now - the offer is without dismantling and transport – this offer is AS IT/IS IT location ... more

Category: 2406 trucks/cement mixers
New in: 1993
Price 15.900 €
Location: Land-de DE Süddeutschland
Seller: Sprenger Machinery - René Sprenger

1 pcs used cement Silos battery Consist of following silos: Htc00hudo 2 X 120 t, dual chamber 60/60 1 X 100 to 1 X 80 to - Without dismantling and/or loading locationt: near Munich/South Germany offer and all price are net and ex stock without guarantee and/or guarantee, mistakes and/or false representations reserve, purchasing like see / how is it – standing or recumbent, subject prior sale more

Category: 2406 trucks/cement mixers
New in: 1991
Location: Land-de DE Prenzlau
Seller: Sprenger Machinery - René Sprenger

1 pcs used concrete mixing plant Liebherr Betomix 2.0 S manufactory: Liebherr type/model: Betomix 2.0 S year of construction: 1991 capacity: 80 cbm/h mixer: Liebherr pan mixer ZE 2000/3000 Scrapper Liebherr LSA 20/37 cement scale water scale chemical addmixture container with 4 pumps 2 pcs silos - 60 to. (dual chamber) Control unit: Liebherr with SPS, in a office container installed Complete steel frame include winter cladding location: Prenzlau / Germany available: immediate Price: on ... more

Category: 2406 trucks/cement mixers
New in: used
Location: Land-fi FI 02320 Espoo, Tyrskyvuori 2 E 73
Seller: Täysjyvä-Gourmet Oy

Capacity approx 100kg flour. 400v. Timer, one bowl, recently coated bowl and hook. Replacement plastic spiral (operates the bowl.) included. Fully functional. more

Category: 2406 trucks/cement mixers
New in: 2004
Location: Land-it IT Italy
Seller: Sprenger Machinery - René Sprenger

Simem Model MobyMix Year of manufacture 2004 Mobile Theor. capacity 70 mc/h 4 Aggregates hoppers 1 cbm SIMEM twin-shaft mixer 3 silos 80 tons Control SIMEM OMNIA in an Office container installed the mixing plant is already qualified dismantled and ready for pickup stored. The offer is include loading on trucks! Immediate available location: Italy Price on request offer and all price are net and ex stock without guarantee, mistakes and/or false representations reserve, purchasing like s ... more

Category: 2406 trucks/cement mixers
New in: used
Location: Land-at AT 1010 WIEN, RENNGASSE 9/9
Seller: Heindl Handels GmbH

Fully automatic package-press FROMM PM150000 to strapping unit MH 600 + reserve unit complete package Ngapf YEAR: 11/2006; Code: 48.150000.012 · good facility overall condition: used, superficial signs of corrosion on the substructure due to impregnation of sawn timber (moist packages) but fully functional, no excessive wear · Maximum dimensions: Wxh = 1300 x 1300 mm · Min. dimensions: Wxh = approx. 800 x 450 mm â?¢ Band setting: 19x1mm Band frames to the  ... more

Category: 2406 trucks/cement mixers
New in: 1991
Location: Land-de DE
Seller: Maschinenhandel Kmet

Elektro-Schubmastgabelstapler JUNGHEINRICH, Baujahr: 1991, Triplexmast, Hubhöhe ca. 6.000 mm, abgelesene Betriebsstd. ca. 2.800 h, Batterie aus 2005 more

Category: 2406 trucks/cement mixers
New in: 1991
Location: Land-de DE
Seller: Maschinenhandel Kmet

Electric thrust mast forklift JUNGHEINRICH, year: 1991, triplex mast, lifting height appr. 6,000 mm, working hours 2,800 hours battery from 2005 more

Category: 2406 trucks/cement mixers
New in: used
Location: Land-it IT 22063 Cantù - COMO , Via Lario, 23
Seller: TOMESANI Srl

Code: 0456Brand: GREDA - ITALIAModel: MF CN 3A - CE-Norm CNC kontrolliert arbeiten center mit 3 gesteuerten Achsen - CE StandardTechnical Daten: Useful längs Länge (X-Achse) max 2200 MmUseful vertikale Länge (Z-Achse) max. 300 MmN ° 3 vertikale Motoren Hp 9, 5N ° 1 horizontale Motor Hp 9 5Inverter Kw 15Numerical Steuerung SIEMENS \"805 SM\" mit 3 digitalen AxisN ° 2 Sperren PistonsPlacement für Dauerbetrieb arbeiten mit Rechts/Links Werkstück Clamping\ nInclination von 15° vertikal Gruppen n ° 1 und 3 auf ... more

Category: 2406 trucks/cement mixers
New in: used
Location: Land-it IT 22063 Cantù - COMO , Via Lario, 23
Seller: TOMESANI Srl

Code: 0456 Brand: GREDA - ITALIA Model: MF CN 3A - CE Standard CNC controlled working center with 3 controlled axis - CE standard Technical data: Useful longitudinal length (X axis) max 2200 mm Useful vertical length (Z axis) max 300 mm N ° 3 vertical motors Hp 9,5 N ° 1 horizontal motor Hp 9,5 Inverter Kw 15 Numerical control SIEMENS "805 SM" with 3 digital axis N°2 locking pistons Placement for continuous cycle working with right/left workpiece clamping Inclination of 15° of Vertical groups ... more

Category: 2406 trucks/cement mixers
New in: 1999
Location: Land-de DE Weilheim Teck
Seller: A-Z Maschinenwelt

LID MAHO DMG DMU 60 E vertical machining center -Serial number: 11080000283 -Operating voltage: 400 V, 50 Hz -X/Y/Z axis resolution: 0.001 mm -Max tool diameter: 80 mm -free Nebenplätzen Max tool diameter: 160 mm -Spindle nose Max tool length: 315 mm -maximum tool weight: 8 kg -maximum tool weight in the magazine: 100 kg -required compressed air: approx. 5,5-8,0 bar -Distance of the T-grooves: 63 mm -Number of T-grooves / size: 8 PCs / 14 H7 -maximum table load: 350 kg -Total power: 26 kVA -with docu ... more

Category: 2406 trucks/cement mixers
New in: 1994
Location: Land-de DE Prenzlau
Seller: GROMITEC

1 high basin FA. BIBKO for domestic hot water with agitator, screwed design for low-cost transport. more

Category: 2406 trucks/cement mixers
New in: 1993
Price 43.000 €
Location: Land-pl PL 43300 Bielsko-Biala, ul. Gen. St. Maczka 9
Seller: ARTechnic

Pressure: 600 kN (60 tons) Unit-pressure: 80 tons/m² Dimensions of the channel: 110 x 68 cm Charging hole: 200 x 102 cm Power Supply: 400V Min. output requirement: 22 kW Max. output requirement: 67 kW (22 kW + 45 kW) Oil cooler: 2,2kW Pins: 4,0kW Binding mechanism: 1,5kW Ruffler: 15kW Number of strapping’s: 4 vertical Tying: Automatic with wire Working pressure:  ... more

Category: 2406 trucks/cement mixers
New in: used
Location: Land-Ös ÖS Texing
Seller: Karner & Dechow Industrie-Auktionen Ges.m.b.H.

People work basket Fliegl agro Center ABHFLI000005V Serial No.: ABHFH 196 16, width: 1.570 mm, weight 280 kg, taking the euro, tool tray (galvanized) more

Category: 2406 trucks/cement mixers
New in: 2015
Location: Land-Ös ÖS Texing
Seller: Karner & Dechow Industrie-Auktionen Ges.m.b.H.

Year of constr.: elapsed. By 2015, serial No.: 102815, hose rupture protection, acquisition: 2016, weight 72 kg, capacity 120 kg more

Category: 2406 trucks/cement mixers
New in: used
Location: Land-Ös ÖS Texing
Seller: Karner & Dechow Industrie-Auktionen Ges.m.b.H.

Quick change Rotary pallet fork (Kitendrehgerät) Fliegl EDGFLM000000 Serial No.: EDGKF900IH 2 16, weight 272 kg, recording: Euronorm, fork length 1,000 mm more

Category: 2406 trucks/cement mixers
New in: 2016
Location: Land-Ös ÖS Texing
Seller: Karner & Dechow Industrie-Auktionen Ges.m.b.H.

Mounting crane Uniforest Scorpion Pro 3 Built in: 2016, serial No.: 722, weight 483 kg, Pmax 200 bar, color yellow/grey, attachment: 1 hydraulic rotary Looper more

Category: 2406 trucks/cement mixers
New in: 2016
Location: Land-Ös ÖS Texing
Seller: Karner & Dechow Industrie-Auktionen Ges.m.b.H.

Year: 2016, serial number: 7442011, weight of 585 kg, Accessories: 1 ditch room shovel Ã?lö 210 H euro, built in: 2016, weight: 251 kg, serial number: 0784109, volume (clustered): 0.82 m3, cutting width: 2,100 mm, depth: 810 mm, height: 750 mm, Anmerkunen to the State: div. rust spots, abrasions more

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)