slit used for sale

Universal Slitting Line 72″ x .187″ x 20,000Lb Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Slitting Line Cesar 8 Slitting line / Cut to length line with winder unloading arm, strip separator and strip ejector. Cut : longitudinal/longitudinal Width _Useful Coil: 350 mm. Maximum thickness: 2 mm. Minimum thickness: 0.20 mm. Unwinder reel capacity: 2500 kg. Internal Coil Diameter: from 300 to 500 Max Coil Outer Diameter: 1000 Shear shaft diameter: 80 mm. Line Direction: Right to Left no. 02 complete sets of knives (rotary slitter blades): 1 series (10 knives each type - mm. 3/3.5/4/5/6/8/10 + spacers + rubbers 2 series (16 knives per type - mm. 2.80/2.85/2.90/2.95/2.5/3/3.5/4/4.5/5/6/8/10 + hardened spacers with hardfacing + normal spacers + rebate spacers + hardened and non-hardened spacers for winder reel. Possibly transferable with combined 500 kg demag jib crane + Columbia pneumatic riveter

Materials: BOPP, PP ,CAST, ALU, LDPE, NYLON, PETP, OPA, Paper, PE, CPP, BOPET Working width 1300 mm Parent Roll Diameter 780 mm Final Roll Diameter 560 mm Maximum mother reel weight 400 kg Finished Roll Weight/Вес готовой бобины (kg) 200 kg Duble Unwinder Unwinder with shaft Rewinder with shaft Number shafts 2 Thickness range (microns) 12-250 Speed (m/min) 500 m/min Brake type With magnet Knife type/Тип ножа (circular, razor, scissor) Razor Slitting Width (mm) 35-130 Unwinder Roll Core Diameter 75 mm Rewinder Roll Core Diameter 75 mm Rewinder Tension (kN) 0-1000 Pressure 6 Bar Control system Voltage 3X380V Frequency 50 HZ Installed Power 55 Kw

Line consists out of: 1 - Double head decoiler - max cap: 15 ton - max length: 1600 mm 2 - Edge slitting unit - variable width: 200 gt; 1500 mm - max thickness: 3 mm - including two scrap rewinders Max sheetwidth: 1500 mm Sheetstrip thickness : 3 mm

Line consists out of: 1 - Decoiler 15 ton - max length: 1200 mm 2 - Slitting unit - interchangeable cassette system - max length: 1100 mm - max thickness: 3 mm 3 - Scrap winder 4 - Recoiler + unloading arm

Line consists out of: 1 - Tensol ASB 6 ton decoiler - max coil length: 1500 mm 2 - Straightening unit - 4 + 3 rolls - cap: 2 mm 3 - Slitting unit - 4 slitting heads - max length: 1500 mm - cap: 2 mm 4 - Shear: - max length: 1500 mm - cap: 2 mm nbsp; Max sheetwidth: 1500 mm Sheetstrip thickness : 2 mm Max weight coil: 6 ton

Special offer: Lemu 1050 mm semiautomatic slitter rewinder reel diam on unwind: up to 1100 mm can be shown in operation rewind diam up to 180 mm, if more needed we will check if possible rewinder: cores: cores: 76 mm and 12,7 min width of the reel 15 mm print of the stripe at the end of the reel automatic stop after achieving particular diameter of the reel machine offered subject to unsold Best regards

for sale by owner, special price for quick sale: used Titan duplex slitter rewinder 1200 mm in operation worked with film & paper unwinder diam. 1000 mm, shafts 76 & 152 mm rewinder: double shafts on rewinder: 76 mm film: youtu.be/T949u6BQRLU Special price for quick sale only- we need space Machine offered subject to unsold

Special offer: 1000 mm Schiavi used duplex slitter-rewinder very compact machine- it needs very little sapce and can be put next to the wall can be shown in operation FILM: unwinder diam. 1000 mm rewinder double web guide with photocell rewinder: easy removing of the finished rolls thanks to cantilevered rolls Special price for quick sale Machine offered subject to unsold Best regards Joanna Laskowicz Flexo

Qty. 1 Second-hand steel strip slitter Mfc.: Dai Hyun Built: 1994 Still in operation until end of July 2023 Material to Slit: Hot & cold rolled steel coil, Hot deep galvanized steel, Carbon steel Line Direction: Left to right Strip Width: 1400 mm Thickness: 0.8 - 6.0 mm Max. Coil weight: 24 MT Un-coiler ID with Liner: Ø 480 mm, Ø 600 mm Coil Dia.: Ø 1000 & Ø 2000 mm Re-coiler Inside Dia.: Ø 500 mm, Ø 760 mm Slitting Speed: 50-100 m/min Edging width: 3 mm to 10 mm Electric Power: Input voltage: 400 V, 50 Hz - 220 VAC, 50 Hz,3 Ph. ± l 0% for drive Control Voltage: 110 VAC, 50 Hz, 1 Ph. Slitting capacity Working speed and No. of cuts Min. slit width is 40 mm at thickness 1.0 – 2.5 mm. Strip thickness No. of cuts No. of strips Line speed mm m/min 1.0 - 1.9 16 15 70-90 2.0 - 2.9 14 13 70-80 3.0 – 4.0 12 11 60-70 4.1 – 5.0 7 6 60-70  ...

fully automated DC-646 Slitter/Cutter/Creaser is Duplo's mid-range solution. With its ability to slit/cut/crease, perforate, and fold digitally-printed applications in one pass, the DC-646 delivers professionally-finished jobs up to 30 sheets per minute. Cut job costs by doing away with time-consuming set ups and make-ready times. Finish jobs in quick turnarounds. Incredibly efficient and easy to use, the DC-646 produces a wide range of full-bleed applications from 24-up business cards to invitations and tickets on demand. Features Automated job set up and changeovers Lightweight paper crease module to process thinner stock Integrates with Fiery Impose to automate job preparation Perforating and in-line folding options for additional finishing

ASHE Sapphire Duplex Slitter Rewinder: Type 130 - 60 Baujahr / Year: 2002 Cutting width minimum / minimum slit width: 15 mm Max. material width: 1300 mm Max. unwind diameter: 1000 mm Unwind core diameter: 76 mm & 150 mm Rewind core i.d.: 76 mm Number of lower knives / number slits: approx. 60 pcs. Material / material range: - Transfer tape with open adhesive / open adhesive transfer tape - Papiere / various papers ... - Buchbindingeinen / canvas book binding material - mit Absaugung / with aspiration - mit 2 Entladenwagen / with two unloader carriage Self-dismantling and removal / machine "as it goes and stands"

<br>Machine completely over-recovered and repainted; Slitter Rewinder with pneumatic unwinding and winding gate, shaft, electrical lateral adjustment, working width 1320 mm, discharged diameter 1300 mm, core diameter 76 mm pneumatic brake Ortlinghaus, new upper and lower knives<br><br>Still in operation: Yes<br>

R23801/12 JAGENBERG slitter rewinder model: Vari Dur age: 1974 Net width : 3.800 mm materials: - coated paper, gloss and matt, grammages from 50 to 250 g/m². max. speed: 1500 m/min. for paper of 250 g/m² (The speed depends on the quality and the grammage of the paper) max. unwinding diameter: 2.500 mm max. winding diameter: 1.525 mm min.cutting width: 100 mm N° of upper blades: 6 Unwinder: 5 singles unwinders max. width of reels: 1.730 mm min. width of reels: 450 mm max. unwinding diameter: 1.525 mm min. unwinding diameter: 300 mm (from 900 to 1700 mm of net width) 600 mm (from 450 to 900 mm of net width) max. weight of reels: 35 kN Available: sofort

R23801/12 JAGENBERG Roller cutter Model: Vari Major Built: 1974 Width: 3,800 mm Materials: - coated paper, glossy and matte, grammage from 50 to 250 g/m2. max. speed: 1,500 m/min. for paper 250 g/m2 (The speed depends on the quality and grammage of the paper.) max. unwinding diameter: 2,500 mm max. winding diameter: 1,525 mm min. cutting width: 100 mm Number of upper knives: 6 Winder: 5 Single Winder max. roll width: 1,730 mm min. roll width: 450 mm max. unwinding diameter: 1,525 mm min. unwinding diameter: 300 mm 600 mm max. roll weight: 35 kN Available: immediately

roller cutter, overhauled, working width: 110 cm, roller diameter, 100 cm, pneumatic winding shafts 70/76/150 mm, hydraulic lifting/lifting device, side edge control, dancer roller, load control with control brake, surface needle, Siemes S5 Still in operation: Yes Available: immediately

Working width 1000 mm Still in operation: Yes Available: immediately

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

<br>Working width: 1320 mm, outside diameter 1300 mm, inner diameter 70-155 mm, shaftless discharge discharge with lifting platform for nut rollers, upwinding with pneumatic extension shaft and mechanical device for finished rolling, lifting core inner diameter 76 mm, machine in production<br><br><br>br>

M18L - 1 Screw Head Slitting Machine (used) without vibrating conveyor Make: MENN - Type: KS8 and KS5 Diameter range 1.7-10 mm Shank length under head 3-105 mm Power Piece/Min 27-1.850 Weight 800 kg Engine power 1.5 kW

WIDTH OF STRIP: 457-1524, THICKNESS: 0.254-1.63 MM WIDTH OF STRIP: 457 - 1676 MM, THICKNESS: 0.66 - 3.175 MM

1. STRIP WIDTH: 700-1550 MM, THICKNESS: 0.3-3.0 MM 2. STRIP WIDTH: 650 MM, THICKNESS: 0.1 MM 3. FOIL WIDTH: 650 MM, THICKNESS: 0.1 MM 4. FOIL WIDTH: 680 MM, THICKNESS: 0.06 - 0.200 MM 5. FOIL WIDTH: 650-800 MM, THICKNESS: 0.007 - 0.065 MM

Longitudinal slitting machine for paper. NEW. Cutting to length (columns) paper or foil to approx. 70 cm width-Perforieren paper, labels, cards, forms -6 Circular blades (blades), or alternatively 6 perforating knife holder -Maximum paper width 70 cm Shipping is possible with extra charge.

working width 600 mm Still in operation: Yes Available: sofort

Working width: 1320 mm, unwinding outer diameter 1300 mm, unwinding inner diameter 70 - 155 mm, shaftless unwinding with lifting platform for mother reel, upwinding with pneumatic expansion shaft and mechanical lifting up device for finished reel, core inner diameter 76 mm, machine in producion

working width 7.400 mm Still in operation: Yes Available: sofort

Slitting plant Spliting line

working width 1000 mm Still in operation: Yes Available: sofort

Slitter rewinder, reconditioned, working width, 110 cm, winding diameter: 100 cm, pneumatic winding shafts 70/76/150 mm, hydraulic lifing in and out mechanism, Web guide unit, tension control unit with adjustable brake, overall perforation, Siemens S5 Still in operation: Yes Available: sofort

450 Automatic Die Cut and Turret Rewinder 450mm Rotary Die Cutting unit: -Unwinder with auto web guider -Auto Tension Control system -Pressure meters for die cutting unit -Standard slitting unit with 6sets blades -Standard matrix removing system -Magnetic Powder system,mechanical speed 100meters/min -Max unwinding diameter 700mm, web width 330mm -Standard connection component to 330 turret rewinder 450 Auto Turret rewinder: -Automatic paper core bowl feeder -Automatic tail glue unit -Automatic paper core conveyor -Pressing paper swing arm -Automatic cut unit -Automatic finished roll ejection -Automatic brush press paper unit -Automatic core glue unit -Air expanding shaft 4sets each sizes 1’’, 1.5’’ and 3’’ -Labeling System (optional): Included Features: Speed: 60-100 m/min Max. Rewinding Diameter: 350mm Max. Web Width: 450mm Min. Rewinding W ...

Machine completely reconditioned and repainted; Slitter rewinder with pneumatic unwinding and rewinding shaft, electrical lateral adjustment, working width 1320 mm, unwinding diameter 1300 mm, core diameter 76 mm, pneumatic brake Ortlinghaus, new upper and lower knives Still in operation: Yes

1. STRIP WIDTH: 300-750 MM, THICKNESS: 0.2-1.5 MM, CAP.: 17500 T/A., MODERNISED: 1995 & 2005 2. LOOPING SLITTER, STRIP WIDTH: 200-356 MM; THICKNESS: 0.05-0.5 MM, CAP.: 5500 T/A., 3. STRIP WIDTH: 300-365 MM, THICKNESS: 0.5-2.0 MM, CAP.: 6500 T/A.

Abrbeitsbreite / working width 1250 mm

Paper size : 210 x 210 mm – 370 x 650 mm Paper weight : 110-350 gms Speed : 1560 sheets/hour Machine complete, in good working conditions.

Qty. 1 Second-hand slitting line Mfc.: Kampf Built: 2001 Re-Installed in 2016 under power – no production! Material Processed: Al. Alloys 1145, 1100, 3003, 7072 and 8111 Temper: 0 Thru H19 Strip Width: 635 - 1753 mm (25" - 69") Thickness: 0.05 - 0.381 mm (0.002" - 0.015") Slitting Width: 15.8 mm - 1169 mm (0.6" - 46") Max. 40 Cuts Plus Edge Trim According to Kampf, this Line will run Can Lid Stock: 0.93 mm (0.037") and "O Temper" Dead Soft Aluminum at 2.06 mm (0.081") with Knife Modifications. Line Speed Max: 800 m/min. (2600 Ft/min.) depending on material type, thickness, etc.

Athader A 1503/17R Slitting Line Width : 1500 mm Maximum thickness : 3 mm

Business card 55 mm module Paper size : 210 x 210 mm – 370 x 650 mm Paper weight : 110-350 gms Speed : 1560 sheets/hour Power supply : 230V – 50/60Hz

Turkish made slitting line The line is in good working condition

SPECIFICATIONS: - Automatic workpiece blocking pneumatically controlled - Machine for the execution of slots of different lengths and depths for window parts, folding shutters and doors

Business card modul Paper size : 210 x 210 mm – 370 x 650 mm Paper weight : 110-350 gms Speed : 1560 sheets/hour Power supply : 230V – 50/60Hz Machine checked and cleaned

Qty. 1 Second-hand coil slitting line Mfc.: GUIDA IMPIANTI, Italy Built: 2003 Max. strip width: 2,000 mm Thickness: 1.5 – 5.0 mm Material: Carbon steel, inox, stainless steel Speed: 80 ~ 160 m/min Coil Weight: 26 TON Coil ID: 508 / 760 mm Coil OD: 2100 mm Knife diameter: 370 / 450 mm Traction resistance: 650 N/m² Installed power: 360 kW

Paper size : 210 x 210 mm – 370 x 650 mm Paper weight : 110-350 gms Speed : 1560 sheets/hour Power supply : 230V – 50/60Hz Business card 55 mm module

Turkish 1550 mm Slitting Line 20 Ton opener 15 Ton winder Fully revised All maintenance has been done recently The line is in working condition Width : 1550 mm

Paper size : 210 x 210 mm – 370 x 650 mm Paper weight : 110-350 gms Speed : 1560 sheets/hour Power supply : 230V – 50/60Hz Business card 55 mm module Machine checked and cleaned in working conditions.

Semi-Automatic Roll Rewinder with Automatic Positioning and Manual Cutting Year of construction: 2023 Condition: Like new, barely in use Manufacturer: LIDEM Construcciones Mecánicas S.L., Spain Inclusive: Blade Lubrication System, Motorized Sharpener, Film Packaging System Description: Semi-automatic slitter rewinder with a cutting width of 2,000 mm, a maximum diameter of up to 400 mm and a minimum diameter of 100 mm. The positioning of the cutting head is automatic, while the lowering of the cutting head is done manually. The fastening system of the cutting head allows for high-precision cutting. System for varying the blade speed to cut all materials. Details: - Two guide benches. Displacement guides for the movement of the head. Cutting head displacement by timing belt. - A servo motor for the movement of the cutting head timing belt allows perfect positioning of  ...

Rotational speed: 15,000/min, max. compressed air supply: 5-8bar.

Connected load: 3.5kW, was maintained regularly, an inspection is possible.

Max. roll width: 650mm, max. roll weight: 50kg.

Slitter Slitter cutting width 750 MM Knife length: 750 mm Mounted on a table (table dim. 1000 x 900 mm) 2 hands control (safety matter)

Material width max.: 2.500 mm Unwinding-diameter: 1.200 mm Rewinding diameter: 1.050 mm material specification: film from 12 µm, paper + laminates , paper + board 35-250 gr/m2, - exhauster and banana roll - number of slitting / knifes: max 7 reels out / round-knifes - min. slitting width: min 180mm out - max. speed - mechanic/practical: abt. 400 m/min - copy of brochures / drawings - although from feb 1965