mandrel used for sale

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 29300 € : 600.65 € : 4000 mm : 950 mm : 1250 mm : 430 kg : 6 cm³ : 50 x 3,31 mm : Ø 1”1/4 mm : Ø 50 x 2,5 mm : 40 x 40 x 4 mm : 25 x 50 x 6 mm : 50 x 25 x 2,7 mm : 60 mm : 200 mm : 20 mm : 210 ° : 1,25 / 2,5 : 3,5 kW : 15 l With mandrel 3 m length Can be used with or withoud mandrel Two bending speeds Programmable bend sequencing and mandrel retraction Independent clamp and pressure die adjustment Micrometer wiper die adjustment Auxiliary system for stabilizing the hydraulic slide pressure Quick tool change system With pneumatic material clamping and DRO system for linear and rotational positioning ALTERNATIVELY: model with mandrel 6 m length price on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fine thread limit mandrel, thread mandrel, good and scrap side on one handle LMW SCHMALKALDEN M 18 x 1.5 thread: M 18 pitch: 1.5 tolerance class: 6H outer diameter: Ø 18 mm mandrel length ( good side ): 10 mm mandrel length ( rejects ): 12 mm Total length: 114.5 mm used, tested ! Dimensions ( packaging ): 120 x 25 x 25 mm

Fine thread limit mandrel, thread mandrel, good and scrap side on one handle LMW SCHMALKALDEN M 28 x 1.5 Thread: M 28 pitch: 1.5 Tolerance class: 6H outer diameter: Ø 28 mm mandrel length (good side): 16 mm mandrel length ( rejects side ): 13 mm Total length: 137 mm used, tested ! Dimensions ( packaging ): 140 x 30 x 30 mm

Thread-limit mandrel, thread mandrel, good and scrap side on one handle LMW SCHMALKALDEN M 22 x 2.5 Thread: M 22 pitch: 2.5 Tolerance class: 6H outer diameter: Ø 22 mm Gauge mandrel length (good side): 21 mm mandrel length ( rejects ): 16 mm Total length: 137 mm used, tested ! Dimensions ( packaging ): 140 x 25 x 25 mm

Bending semi-automatic, tube bending machine, mandrel bending machine MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Fabr. No. 056 Year of manufacture 09/2004 - for simultaneous bending of two steel pipe sections up to 12 mm bending angle max. 90 Tube diameter max 12mm Mandrel length approx. 65 mm Nominal power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Mains connection 400 volts, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Control for angle input via STOBER Controlbox Series 4000/5000 - Control SIEMENS S7-200 with display TD200 - Machine without bending tools and without tool bearing bolt 25 x 183 mm - only 1 bending mandrel available (see pictures). Space requirements L x W x H 1000 x 1000 x 1500 mm Weight 390 kg good condition; used

Test mandrel, control mandrel PAGUS 188354 187314 mandrel: Ø 50 x 310 mm Cantilever length ( A-dimension ): 370 mm Flange diameter ( inner ): Ø 103 / 106 x 14 mm ( conical ) Flange diameter ( outer ): Ø 175 x 50 mm bolt circle diameter: Ø 150 mm hole diameter: Ø 10.5 mm with wooden box used, tested ! Dimensions ( wooden box ): 425 x 225 x 205 mm Dimensions ( test mandrel ): 370 x 175 x 175 mm

Manual mandrel, mandrel, bore mandrel, with attachment MARPOSS M1-C code: 3724094150 measuring range: Ø 17,440 mm, +0.0160 / -0.0290 mm length measuring arm: 56 mm measuring head: Ø 17.3 mm, length: 25 mm approx. 1.8 m Connection cable with plug used, tested ! Dimensions ( mandrel without cable ): 195 x 50 x 50 mm Dimensions ( packaging ): 220 x 100 x 100 mm

Manual mandrel, mandrel, bore mandrel, with attachment MARPOSS M1-C code: 3724094150 measuring range: Ø 18,5 mm, +/- 0.01 mm length measuring arm: 56 mm measuring head: Ø 17.3 mm, length: 25 mm approx. 1.8 m Connection cable with plug used, tested ! Dimensions ( mandrel without cable ): 195 x 50 x 50 mm Dimensions ( packaging ): 220 x 100 x 100 mm

- Round tube steel DM 6 – 42 x 5 mm - Round tube stainless steel DM 6 – 42 x 3 mm - Pipe push-on length max. 6,000 mm - Programmable logic controller up to 20 angles - Digital display of longitudinal displacement - Digital display of torsion - Programmable, anticipatory mandrel retraction - Mandrel lubrication system by hand pump - Wrinkle smoother receptacle - Bending speed max. 13°/sec - Bending angle up to 180° + 10° deflection - Manual feed - Manual twisting - Right bending direction - Radii from 1.5 D - Incl. bending tool : - DM 12 mm - radius 36 mm ) / DM 15 mm - radius 37.5 mm - DM 18 mm - radius 36 mm - DM 22 mm, radius 44 mm with mandrel - DM 42 mm, radius 44 mm with mandrel

Nozzle mandrel MASSI Ø 47 mm mandrel: Ø 47 x 45.5 mm tolerance: +0.070 / -0.030 mm thread: M18 x 1.5, length: 15 mm spanner width: 14 mm nominal diameter (compressed air): 6 mm used, tested ! Dimensions ( nozzle mandrel ): 86 x 47 x 47 mm Dimensions ( packaging ): 90 x 50 x 50 mm

Pipe thread rejects mandrel, thread mandrel LMW SCHMALKALDEN R1 1/2 Thread: R1 1/2 ( inch ) Outer diameter: Ø 47 mm mandrel length: 20 mm Total length: 114 mm used, tested ! Dimensions ( packaging ): 120 x 50 x 50 mm

Pipe thread rejects mandrel, thread mandrel LMW SCHMALKALDEN R1 1/4 Thread: R1 1/4 ( inch ) Outer diameter: Ø 42 mm Gauge mandrel length: 20 mm Total length: 115 mm used, tested ! Dimensions ( packaging ): 120 x 45 x 45 mm

Teaching mandrel, teaching mandrel LMW SCHMALKALDEN 175H7 diameter: Ø 175 mm deviation: +40 tolerance: H7 mandrel length: 20 mm Total length: 130 mm used, tested ! Dimensions ( packaging ): 175 x 175 x 130 mm

Thread rejects mandrel, thread mandrel LMW SCHMALKALDEN M38 x 1.5 Thread: M38 pitch: 1.5 outer diameter: Ø 38 mm mandrel length: 16 mm without handle used, tested ! Dimensions ( packaging ): 40 x 40 x 20 mm

Thread rejects mandrel, thread mandrel LMW SCHMALKALDEN M50 x 1.5 Thread: M50 pitch: 1.5 outer diameter: Ø 50 mm mandrel length: 16 mm without handle used, tested ! Dimensions ( packaging ): 60 x 60 x 20 mm

Nozzle mandrel MASSI Ø 35 mm mandrel: Ø 35 x 40.3 mm tolerance: +0.070 / -0.030 mm thread: M18 x 1.5, length: 15 mm width across flats: 14 mm nominal diameter (compressed air): 6 mm used, tested ! Dimensions ( nozzle mandrel ): 82 x 35 x 35 mm Dimensions ( packaging ): 90 x 50 x 50 mm

Manual mandrel, mandrel MARPOSS M1-C code: 3724034150 length measuring arm: 58 mm cross-section measuring arm: 8 x 11 mm approx. 1.8 m Connection cable with plug New ! dimensions ( mandrel without cable ): 195 x 50 x 50 mm dimensions ( packaging ): 220 x 100 x 100 mm

Centering mandrel GÜHRING ZSB-1674653 W1150500-0001, 1674656, 15575 Overall length: 134 mm mandrel diameter: Ø 40 mm, length: 68 mm, inner diameter: Ø 20 mm flange diameter: Ø 75 mm, length: 50 mm guide bolts: Diameter: Ø 32 mm, Length: 16 mm, Inner diameter: Ø 24 mm used, tested ! Dimensions ( centering mandrel ): 134 x 75 x 75 mm Dimensions ( packaging ): 130 x 115 x 140 mm

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 121200 € : 5700 mm : 1100 mm : 1550 mm : 2700 kg : 25 cm³ : 76,1 x 6,8 mm : 2”1/2 mm : 76,2 x 3,8 mm : 63,5 x 63,5 x 5,6 mm : 70 x 50 x 8 mm : 70 x 50 x 6 mm : 79 mm : 250 mm : 20 mm : 195 ° : 5/7 U/min : 27 kW : 200 l FST clamping system (Patented) 6 programmable axes: carriage mobement (Y1 axis), bending plane rotation (B axis), bending angle (C axis), pressure die movement (X2 axis), booster (Y2 axis) and hydraulic mandrel movement (Y3) Touch screen control with 3D display of the tube Anti collision system tube/machine, tube/floo, tube/external elements and tube/equipment Importing files in iges and dxf format (optional) Integrated Wi-Fi FURTHER MANDREL LENGTHS ON REQUEST The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 35300 € : 723.65 € : 4000 mm : 950 mm : 1250 mm : 850 kg : 10 cm³ : 64 x 3,3 mm : 2 mm : 60,3 x 2,2 mm : 60 x 60 x 2 mm : 40 x 60 x 4 mm : 60 x 40 x 3 mm : 76 mm : 200 mm : 20 mm : 210 ° : 4,2 kW : 15 l with mandrel 3 m length FST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slide Programmable C-axis bending Positioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stops Multifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu 30 programs of 9 bends each can be memorized Screen for digital display for carriage feed (Y1 Axis) and rotation (B Axis) External pressure gauges for easy setting of the system and closing pressure Variable bending speed up to  ...

Tube range up to: 48,3x3,25mm (E235mitRm =2xD) Bending radius up to: 125 mm Control: electronic ( + known 4-fold bending angle preselection ) Bending angle maximum: 180° Bending speed: 20°/s Dimensions L / W / H: 2380 / 800 / 1250 mm Weight: approx. 650 kg Electr. Power: 2.4 kW incl. sawing unit with visualization of the saw position via line laser Deburring unit, drive unit for assembly attachments Tube positioning - length and twisting 2-axis positioning indicator, premature mandrel retraction Auto. Mandrel lubrication (minimum quantities) Interface for network connection and data import

Control mandrel PAGUS Control mandrel SK40 mount: SK40 Outer diameter: Ø 45 mm Cantilever length ( A-dimension ): 300 mm used, tested ! Dimensions: 395 x 45 x 45 mm

Cutter mandrel, tool holder SECO, EPB E9306557104012 Tool holder: Ø 40 mm, length: 40 mm, wedge width: 10 mm Cantilever length ( A-dimension ): 180 mm mount: HSK - A100 New ! Dimensions (cutter mandrel): 280 x Ø 100 mm Dimensions ( packaging ): 330 x 110 x 110 mm

Ring bending machine, profile bending machine, bending machine, pipe bending tool, tube bender, tube bending machine, mandrel bending machine -Mandrel bending machine: mechanical profile bending machine -Accessories: see photos -Total dimensions: 1200/740/H1220 mm -Weight: 169 kg

pressure: 5,0 t throat: 215 mm workpiece height max.: 445 mm Mandrel diameter: 50 x 50 x 645 mm table plate: Ø 275 mm total power requirement: manuell kW weight of the machine ca.: 160 kg. dimensions of the machine ca.: 370 x 550 x 810 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Working range pipe Ø 4 - 28 mm x 3 mm for steel - Working range pipe Ø 4 - 35 mm x 2 mm for non-ferrous metals - Pipe sliding length 3,000 mm - Electronic single-axis control / angle input - Bending radius max. 90 mm - Minimum quantities - Mandrel lubrication - incl. existing tools ( 17.2 x 2 / 21.3 x 2 / 25.0 x 2 / 26.9 x 3 mm ) - Weight approx. 600 kg - L x W x H approx. 3,800 x 600 x 1,100 mm - Incl. operating instructions and spare parts list

- Pipe diameter max. 76.1 mm - Pipe sliding length max. 4,500 mm - bending radius 200 mm - Bending direction right - electronic 1-axis control - Twist angle unit with stops - electronic display of rotation - electronic display of the longitudinal position - Mandrel lubrication man. - L x W x H approx. 5,700 x 850 x 1,150 mm - Weight approx. 1,700 kg

10 pcs. Pressure mandrel set suitable for the following workshop presses: WK 10 TH WK 12 FH WK 20 FH WK 15 TH Pro WK 20 FH Pro WK 30 FH Pro WK 50 FH Pro PWK 10 T PWK 20 F PWK 45 F PWK 50 F PWK 75 F PWK 100 F Printing capacity Diameter (A) Diameter (B) Length (C) 2 ton 10 mm 25 mm 50 mm 3 tons 12 mm 25 mm 60 mm 8 tons 16 mm 25 mm 60 mm 12 tons 18 mm 25 mm 85 mm 14 tons 20 mm 25 mm 85 mm 16 tons 22 mm 25 mm 85 mm 18 tons 25 mm 25 mm 110 mm 20 tons 30 mm 25 mm 110 mm Weight, set total approx.: 7,5 kg

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 64000 € : 1299.2 € : 4535 mm : 1145 mm : 1400 mm : 1488 kg : 18 cm³ : 76 x 3,6 mm : 76 x 2,3 mm : 70x70x3 mm : 70x50x3 mm : 70x50x6 mm : 76 mm : 200 mm : 10 mm : 195 ° : 1,5/3 (50/100Hz) : 3 kW : 50 l Three-phase NC electric-hydraulic mandrel bending machine up to 76 mm with 1 controlled axis (bending axis C) New TCPlus control • 7” colour touch screen • Icons for ease use • Automatic mode, manual mode, programming mode • Advanced OFFSET function • Easy language change • Auto-tuning of the main machine components • Programmable bending speed for each single bend of the program • Unlimited programs possibility (USB port) • Every program can contain up to 30 different bends • Available extensions of 2 meters each (optional) • Tie bar (optional - art. TB80-TI) The data for this ad was created with ModulMWS - the so ...

mandrel bending machine Tansfluid DB 628 Year of construction: year 1995 Drive power Drive power 1.5 kW Drive drive hydraulic cylinder & roller chain Pipe range bending type 4-28 mm Bending angle bending angle 190° (without tube) Bending radius bending radius 1.5 x D – 2.0 x D Nominal pressure nominal pressure 250 bar Operating pressure 3095 mm n. right. Flow rate delivery rate 4.5 l/min

Control mandrel PAGUS 0602-2305 Mount: SK40 Outer diameter: Ø 50 mm Cantilever length ( A-dimension ): 330.25 mm used, tested ! Dimensions: 400 x 50 x 50 mm

Cutter mandrel, tool holder WMW 4 x 30 x 200 ( 4x30x200 ) TGL 30-4113 MK4 shaft diameter: Ø 20 mm Tool holder: Ø 30 mm New ! Dimensions: 490 x 50 x 50 mm

Cutter mandrel, tool holder, with tightening thread WMW, VWF 40 x 40 x 315 ( 40x40x315 ) SK40 Tool holder: Ø 40 x 315 mm used, tested ! Dimensions: 485 x 63 x 63 mm

Cutter mandrel, tool holder, with tightening thread WMW, VWF 40 x 32 x 315 ( 40x32x315 ) SK40 Tool holder: Ø 32 x 315 mm used, tested ! Dimensions: 478 x 63 x 63 mm

Cutter mandrel, tool holder, with tightening thread WMW, VWF 40 x 27 x 315 ( 40x27x315 ) SK40 Tool holder: Ø 25 x 315 mm used, tested ! Dimensions: 473 x 63 x 63 mm

Cutter mandrel, tool holder, with tightening thread WMW, VWF 40 x 27 x 315 ( 40x27x315 ) SK40 Tool holder: Ø 25 x 315 mm used, tested ! Dimensions: 473 x 63 x 63 mm

Centering mandrel PAGUS diameter: Ø 30 / 42 mm total length: 239 mm area 1: Ø 42 mm, length: 5 mm, Ø 46.5 mm, length: 6 mm, Ø 42 mm, length: 27 mm area 2: Ø 30 mm, length: 4x 38 mm, 1x 30 mm used, tested ! Dimensions: 239 x 47 x 47 mm

Cutter mandrel, tool holder, with tightening thread WMW 4 x 25 x 160 ( 4x25x160 ) TGL 30-4113 MK4 shaft diameter: Ø 20 mm Tool holder: Ø 25 mm New ! Dimensions: 490 x 45 x 45 mm

Cutter mandrel, tool holder, with tightening thread WMW 4 x 25 x 80 ( 4x25x80 ) TGL 30-4113 MK4 shaft diameter: Ø 16 mm Tool holder: Ø 25 mm New ! Dimensions: 300 x 45 x 45 mm

Cutter mandrel, tool holder, with tightening thread WMW 3 x 25 x 160 ( 3x25x160 ) TGL 30-4113 MK3 shaft diameter: Ø 20 mm Tool holder: Ø 25 mm New ! Dimensions: 425 x 45 x 45 mm

Cutter mandrel, tool holder, with tightening thread WMW 4 x 30 x 100 ( 4x30x100 ) TGL 30-4113 MK4 shaft diameter: Ø 16 mm Tool holder: Ø 30 mm New ! Dimensions: 325 x 50 x 50 mm

Cutter mandrel for screw-on cutters, tool holder BENZ D50 x 4 x 95 ( D50x4x95 ) 042.061 4 95 SK50 thread cutter mounting: M16 x 2 shaft diameter: Ø 30 mm shaft length: 63 mm used, tested ! Dimensions (packaging): 240 x 120 x 120 mm

Cutter mandrel, tool holder, with tightening thread PAGUS / WMW PTFn-4/16/250 holder (machine side): MK4 with internal thread M16 x 2.0 Depth: 40 mm Tool holder: Ø 16 mm, length: 250 mm, groove width: 4 mm width across flats: 22 / 32 mm used, tested ! Dimensions: 400 x 42 x 42 mm

Cutter mandrel / tool holder, with tightening thread PAGUS / WMW PTFn-4/27/315 adapter ( machine side ): MK4 with female thread M20 x 2.0 Depth: 60 mm Tool holder: Ø 27 mm, length: 315 mm, groove width: 7 mm wrench size: 31 / 36 mm used, tested ! Dimensions: 475 x 41 x 41 mm

Man MARPOSS M1-C code: 3724094050 length measuring arm: 58 mm cross-section measuring arm: 14 x 29 mm approx. 1.7 m Connection cable with plug New ! dimensions ( mandrel without cable ): 195 x 50 x 50 mm dimensions ( packaging ): 220 x 100 x 100 mm

Hydraulic mandrel bending machine with a lot of accessories Preselection of 8 different bending angles with digital display Digital length display as well as digital display of torsion Max. effective length: 6096 mm Round tube steel (S 235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm Max. bending angle: 180° Weight: approx. 1800 kg

Mandrels, mandrels SOMET SK50 Type 685062 Diameter: Ø 60 x 215 mm / Ø 59 x 31 mm mounting: SK50 with wooden box used, tested ! dimensions ( wooden box ): 430 x 115 x 100 mm dimensions ( mandrel : 380 x 71 x 71 mm

Description: bending diameter range for bending strength modulus (RS=250N/mm2): ,1.3 m3 maximum pipe diameter: ,32 mm minimum pipe diameter: ,4 mm maximum pipe length for mandrelless bending: ,9999 mm minimum pipe length for bending with a mandrel: ,4450 mm  , single dimensions machine: 5200 x 1000 x 1200 mm control cabinet: ,600 x 900 x1900 mm  , set includes a safety mat, a SICK light curtain and tools but only those visible in separate photos (not mounted on the machine) offer does not include fences or other tools mounted on the machine  , please also have a look at the PDF document of this machine tube length max.: 9,999 mm, weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 5,200 x 2,000 x 1,900 mm

Description: Serial no. 629736 Mandrel length 1800 mm Load capacity 5,000 kg at 1000 mm Approx. Onsite Dimension. (l x w x h): 1,800 x 750 x 750 mm, weight approx.: 280 kg

pressure: 1,0 t throat: 95 mm table length: 120 mm table width: 120 mm total power requirement: manuell kW weight of the machine ca.: 17 kg. dimensions of the machine ca.: 270x130x330 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.