Manufacturer:
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
milling machines / CNC Tool-Milling Machines
date: 02.03.2024 add to watchlist
approved
dealer
item-No.: 163361408
New in: 2015

used

check Seller: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Location: Schweiz Land-de

add to watchlist

x-travel: 800 mmy-travel: 630 mmz-travel: 550 mmcontrol: TNC 640 Millturn HeidenhainMain spindle: turning speed range - main spindle: max. 12.000 U/minpower capacity - main spindel: 7,5 - 22,5 kWmax. Torque: 140 Nmtool taper: HSK-A 63 NC-Rotary table:: faceplate diameter: 280 mmT-slots: H7 x 50 measuring system: ECN 225 swivellable: +/-120 °Torque: max. 180 NmHolding Torque: 800 Nmmax. table load: 320 kgturning speeds: 200 min/-1Tool-Presetter:: numbers of positions in the tool changer: 40 max. tool diameter: 75 mmmax. tool-dia with free toolbox: 160 mmmax. tool length: 320 mmmax. tool weight: 4 kgfeed: rapid travel ( X / Y / Z ): 60 m/mintotal power requirement: 31 kVAweight of the machine ca.: 7,8 tdimensions of the machine ca.: 5,0 x 6,0 x 3,0 mDocuments: Chip conveyor: Coolantsystem: high pressure coolant: 40 barthrough spindle coolant: triple signal light: paper band filte ...

milling machines / CNC Tool-Milling Machines
date: 26.11.2023 add to watchlist
approved
dealer
item-No.: 162866848
New in: 1998

used

check Seller: Zölch GmbH & Co. KG
Location: 95643 Tirschenreuth-Wondreb Land-de
Price: 19.500 € add to watchlist

Mill Plus Control Built in 1998 24-fold tool changer Working area 500 x 380 x 380 mm Rapid traverses 10000 m/min Rapid traverse 30 m Direct displacement measuring system Tool holder SK40, ISO DIN 69871 max. spindle speed max. 15000 rpm (Kessler) Angle table 800 x 480 mm, load 500 kg Spindle concentricity 300/0.01 mm Weight 3500 kg Machine dimensions: 2.45 x 1.76 x 2.38 m Coolant Injection El. Handwheel The machine is in very good technical condition. Runs quietly and precisely.

milling machines / CNC Tool-Milling Machines
date: 21.09.2023 add to watchlist
approved
dealer
item-No.: 161026794

used

check Seller: EnTeHa GmbH & Co.KG
Location: Hessen Land-de

add to watchlist

Current new entry : 5267 + 5268 2 x DECKEL FP 2 A / 2819 Contour 3 Rigid table + chip tray

milling machines / CNC Tool-Milling Machines
date: 19.09.2023 add to watchlist
approved
dealer
item-No.: 153915689
New in: 1980

used

check Seller: Vramac Machines bv
Location: 7327 Apeldoorn Land-nl

add to watchlist

Code 1815 DESCRIPTION CNC Universal toolroom milling machine Make DECKEL Model FP 3 A S/N 2206-0593 Year 1980 Control Grundig 2102 ( position ) Table 800 x 460 mm Longitude ( X – axis ) table 500 mm Vertical ( Y – axis ) table 400 mm Cross ( Z – axis ) spindle 300 mm Spindle quill 80 mm Spindle taper 40 ISO Speeds 25 - 2500 rpm Feeds X-Y-Z 1 – 500 mm/min Rapides 1,5 m/min Spindle motor 2,0 / 4,0 kW – 380 Volts Accessories Table 800 x 460 mm Coolant Condition Machine is in good condition

milling machines / CNC Tool-Milling Machines
date: 19.09.2023 add to watchlist
approved
dealer
item-No.: 153915686
New in: 1987

used

check Seller: Vramac Machines bv
Location: 7327 Apeldoorn Land-nl

add to watchlist

Code 0733 DESCRIPTION CNC Universal toolroom milling machine Make DECKEL Model FP 4 MA S/N 2204-1372 Year 1987 Control Grundig - Contour 2 Table 800 x 460 mm Longitude ( X – axis ) table 485 mm Vertical ( Y – axis ) table 380 mm Cross ( Z – axis ) spindle 385 mm Spindle quill 80 mm Spindle taper 40 ISO Speeds 63 - 3150 rpm Feeds X-Y-Z 2 - 3000 mm/min Rapides 3 m/min Spindle motor 3,7 / 4,4 kW – 380 Volts Accessories Table 800 x 460 mm Coolant Condition Machine is in good condition

milling machines / CNC Tool-Milling Machines
date: 02.03.2024 add to watchlist
approved
dealer
item-No.: 147304372

used

Location: Land-bg

add to watchlist

DECKEL FP2A Universal toolroom milling machine CNC Control GRUNDIG Contour 3 Rigid angle table 390x620 mm X/Y/Z: 300 x 300 x 400 mm Spindle quill 80 mm Spindle speed 40…4000 rpm Feed 2-3600 mm/min SK 40 Spindle motor 1,6/2,0 kW Weight 1295 kg

milling machines / CNC Tool-Milling Machines
date: 18.09.2023 add to watchlist
item-No.: 159335223

used

Seller: Keetels Machines BV
Location: 5482T Schijndel Land-nl
Price: 11.000 € add to watchlist

x-travel 300 mm y-travel 300 mm z-travel 400 mm CNC control DIALOG 11 Spindle speeds 31 - 5,000 rpm Spindle holder ISO 40 Table size 620 x 390 mm Table load 250 kg Feeds infinitely variable 2 - 6,000 mm/min Drive power 5.5 kW Pinole stroke 80 mm Coolant device Operating voltage 380 V Total power requirement 11.0 kVA Machine weight approx. 1.65 t Space requirement approx. 1.85 x 1.90 x 1.80 m Electrical cabinet 1.35 x 0.70 x 1.70 m Coolant box 1.00 x 0.45 x 0.20 m

milling machines / CNC Tool-Milling Machines
date: 16.01.2024 add to watchlist
approved
dealer
item-No.: 163157415

used

check Seller: Osterer Werkzeugmaschínen
Location: 4853 Steinbach am Attersee Land-at
Price: VB 2.800 € add to watchlist

Nice machine, however, parts of the controls are missing. Mechanically very good condition Sell spare parts or complete machine ! Table, milling head, guides, spindles, measuring rulers, motors, E-parts, control panel, ... or to convert to a new control system !

milling machines / CNC Tool-Milling Machines
date: 12.09.2023 add to watchlist
approved
dealer
item-No.: 152677091
New in: 1992

used

check Seller: W&T EFRA
Location: Land-de
Price: VB 9.500 € add to watchlist

Milling machine lid FP 4 NC Built c. 1992 with controlled C-axis 2 pieces of screw sticks Various tool holders Machine is in top condition and was last serviced on 20.08.2020 for approx. 3.000,- € (net). documents available. The machine is sold only because of space requirements. Location of the machine: 76661 Philippsburg

milling machines / CNC Tool-Milling Machines
date: 02.03.2024 add to watchlist
approved
dealer
item-No.: 163490060
New in: 1988

used

check Seller: G. Folmer
Location: NRW
Price: 4.000 € add to watchlist

x-travel: 400 mmy-travel: 315 mmz-travel: 400 mmControl: Dialog 4 total power requirement: 11 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 1950 x 1700 x 1400 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

milling machines / CNC Tool-Milling Machines
date: 02.03.2024 add to watchlist
approved
dealer
item-No.: 163452361
New in: 1988

used

check Seller: G. Folmer
Location: NRW Land-de
Price: 7.500 € add to watchlist

x-travel: 400 mmy-travel: 315 mmz-travel: 400 mmControl: Dialog 4 total power requirement: 11 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 1950 x 1700 x 1400 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

milling machines / CNC Tool-Milling Machines
date: 05.02.2024 add to watchlist
approved
dealer
item-No.: 160654877
New in: 2000

used

check Seller: Beppo Bercht Werkzeugmaschinen
Location: Land-de

add to watchlist

Control Siemens Sinumerik 810 D Travel x/y/z 350 mm / 240 mm / 340 mm Drive power // Tool holder 6.3 kW / 10 kW // ISO 40 Spindle speed range of the working spindle 20 – 6,300 rpm Connected load / weight of the machine 15 kW / 2 t Manually operated rotary table C-axis 360°/swivel range B-axis +105/-15° table load / table clamping surface 100 kg / 400 mm x 290 mm Accessories: various holders and tools according to photo Remarks: Error at startup, possibly control defective, not operational

milling machines / CNC Tool-Milling Machines
date: 07.02.2024 add to watchlist
approved
dealer
item-No.: 160427581
New in: 2002

used

check Seller: ETAP-Development and engenering
Location: 8000 Novo mesto Land-si

add to watchlist

Deckel Maho DMF 300 Linear, built in 2002 TECHNICAL INFO: CONTROLS: CNC SIEMENS Sinumerik 840 D power line, TRAVELS: X: 3,000 mm Y: 560 mm Z: 720 mm Spindle mount SK40 Spindle speed: max 12,000 rpm (limited to 6,000 by gearbox) Tool magazine for 40 tools Operating hours: 21,865 Spindle hours: only 9,320 Very reliable, stable and good machine! No maintenance backlog! - In recent years, small items such as belt pulleys, hydraulic accumulators, scrapers, linkages have been added, regardless of the maintenance positions - In 2018 a new Z-axis ball screw came in. The engine gearbox was also overhauled - Rotary table 560mm (4th axis) for assembly also available and part of the sale The orientation of the Hirth toothing when swiveling would have to be readjusted. However, we only use the machi ...

milling machines / CNC Tool-Milling Machines
date: 23.02.2024 add to watchlist
approved
dealer
item-No.: 153706417
New in: 2000

used

check Seller: MARC
Location: 67500 HAGUENAU Land-fr

add to watchlist

Machine details Stock number 1105-03328 Machine type tool milling machine - Universal Make MAHO Type MH 800 E Year of construction 2000 Control type CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight base from stock price Technical details x-path 700 mm y-way 550 mm z-path 500 mm Speed 20 - 5000 rpm Tool holder SK 40 Quibola stroke vertical 80 mm Feed 1 - 5000 mm/min Rapid speed 6000 mm/min Table size 900 x 550 mm Total power requirement 16 KVA Weight of the machine ca. 7 t Space requirement approx. 2.4 x 2.85 x 2.1 m Information - with web control CNC 532 - with FIXED ANGLE TABLE WITH TOOL CHANGER - Enclosure Machine under power Ready for demonstration.

milling machines / CNC Tool-Milling Machines
date: 07.02.2024 add to watchlist
approved
dealer
item-No.: 163114471
New in: 2003

used

check Seller: ETAP-Development and engenering
Location: Land-si

add to watchlist

WE OFFER AN NICE CONDITION DMU 70 EVO MACHINE IS ON POWER WORKING DAILY ORDERS IN SHORT WE PROVIDE VIDEO OF WORKING

milling machines / CNC Tool-Milling Machines
date: 07.02.2024 add to watchlist
approved
dealer
item-No.: 152414865
New in: 2005

used

check Seller: ETAP-Development and engenering
Location: Land-si
Price: 57.000 € add to watchlist

60P Hi-Dyn 5 Axis CNC Machining Centre (2005) - Heidenhain Heros iTNC530 Control, - CAT40 Taper, - 630mm Diameter Table, - 60 Tool ATC, - Swarf Conveyor, - Coolant Filtration. S/No. 1116-000201-3 - - include CAT 40 Tooling suitable for Deckel Maho with Universal 3D Tester. - Aditional table with holders - 26 tools holder included AND 3d PROBE - HIGH PRESSURE 40 BAR COOLING TROUGH SPINDLE - COOLING TROUGH SPINDLE - NEW CHILLER IN 2021 - NEW HARD DISCS IN 2021 DECEMBER SPINDLE HOURS: 21400 MOST OF TIME MACHINE CUT FIBERGLASS AND PLASTIC, ALU and a bit mild steel. For customer we organize free loading . Transport we organize as well with an separated offer.

milling machines / CNC Tool-Milling Machines
date: 21.12.2023 add to watchlist
approved
dealer
item-No.: 157342373

used

check Seller: Komplett-Konzept Verwertungs GmbH
Location: Land-de
Price: VB 10.505 € add to watchlist

Friedrich Deckel FP 2 LB tool milling machine This universal milling machine FP 2 LB from the well-known German manufacturer Friedrich Deckel in Munich has as a special feature an extremely stable basic body and is designed as a travel column machine i.e. the machine does not lose accuracy should heavy parts (up to 1000 kg) be clamped. Another special feature is the so-called inclined bed of 45 degrees. Thus, after dismantling the universal table, it is possible, especially V-engine blocks with 90-degree cylinder angle (e.B. amerik. V8) directly clamp and process. The long travel distance of 800mm is also an advantage in this case. Lid FP 2 LB universal swivel/tilt table (± 45° / ± 15°) Lid Universal Divider Vice 160 mm Working range: X= 800 mm / Y= 300 mm / Z= 400 mm From 01.07.21 the machines are ready for collection. Dismantling and transport by the buyer.  ...

milling machines / CNC Tool-Milling Machines
date: 07.02.2024 add to watchlist
approved
dealer
item-No.: 163128884
New in: 2008

used

check Seller: ETAP-Development and engenering
Location: Land-at

add to watchlist

WE OFFER AN NICE CONDITION HERMLE C40U WITH NEW SPINDEL IN 2018 TRAVELS: X: 850 Y: 700 Z: 500 CONTROLS: HEIDENHEN ITNC 530 SK40 38 ATC TOOL 10000 RPM IKZ 80 BAR WITH PAPER FILTER AUTOMATIC DOORS KINEMATIC OPTION BLUM TOOL CONTROL LINEAR AXIS CHIP CONVENYOR MACHINE WILL BE AWAILIBLE TO TOOK FROM PRODUCTION IN NEXT WEEKS FOR CLIENT WE ORGANIZE ALSO TRANSPORT

milling machines / CNC Tool-Milling Machines
date: 22.08.2023 add to watchlist
approved
dealer
item-No.: 162240821
New in: 1992

used

check Seller: CNC BOTE Johann Demmel
Location: 86971 Peiting Land-de

add to watchlist

General: Control Heidenhain TNC 415 Year of construction: 1992 Travels X 500 mm Y 360 mm Z 400 mm Spindle speed 20 – 4,500 rpm Tool holder SK40 Quill stroke vertical 75 mm Other equipment and included accessories: 4-axis as rotary table Electric handwheel Spin nest Coolant device

milling machines / CNC Tool-Milling Machines
date: 02.03.2024 add to watchlist
approved
dealer
item-No.: 156364848
New in: 1996

used

check Seller: Kemmerich Werkzeugmaschinen GmbH
Location: ab Lager Monheim am Rhein Land-de

add to watchlist

x-travel: 600 mmy-travel: 400 mmz-travel: 420 mmControl: HEIDENHAIN TNC 415 table-size: 900 x 460 mmturning speeds: 20 - 4500 U/minspindle motor: 8,6 kWtool taper: SK 40 quill stroke: 75 mmRapid Travel X / Y / Z-Achse: 7 / 7 / 6 m/mintotal power requirement: 12 kVAweight of the machine ca.: 3 tdimensions of the machine ca.: 2,8 x 2,2 x 2,1 mequipped with:- CNC Control HEIDENHAIN TNC 415- rigid angle table- electr. Handwheel- Coolant- Vice Allmatic Type 160The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

milling machines / CNC Tool-Milling Machines
date: 02.03.2024 add to watchlist
approved
dealer
item-No.: 158234072
New in: 1990

used

check Seller: KIRCHGEORG Werkzeugmaschinen GmbH
Location: Dreieich Land-de

add to watchlist

x-travel: 600 mmy-travel: 400 mmz-travel: 420 mmcontrol: TNC 355 HEIDENHAINspindle taper ISO: 40 spindle turning speed range: 20 - 4.000 U/mintable-size: 900 x 460 mmfeeds -stepless-: 1 - 6.000 mm/minrapid traverse: 7,0 m/minpower capacity: 5,9 kWquill stroke: 75 mmcoolant: voltage: 380 Vtotal power requirement: 13,0 kWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2,60 x 2,35 x 2,20 m- Serial-No.: 9079- control: TNC 355 HEIDENHAIN- horizontal milling spindle- central lubrication- coolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

milling machines / CNC Tool-Milling Machines
date: 20.11.2023 add to watchlist
approved
dealer
item-No.: 160852950

used

check Seller: ISC Werkzeugmaschinen GmbH
Location: Land-de

add to watchlist

Heidenhain TNC 124 Universal table 630x400 mm Spindle speed 63-3150 1/min, SK 40 Travel X/Y/Z 600/400/400mm Vertical milling head with manual quill Counter bearing arm with counter bearing Partial enclosure hinged Need for repair in Y-axis

milling machines / CNC Tool-Milling Machines
date: 02.10.2023 add to watchlist
approved
dealer
item-No.: 158914236
New in: 1997

used

checkTOP Seller: LUSAMATEX - Máquinas Têxteis, Lda.
Location: 4430 Vila Nova de Gaia Land-pt

add to watchlist

1 KERN high precision Micro 5 Axis CNC Milling & Drilling machine type HSPC 2216, year 1997, serial number 352, HEIDENHAIN type TNC 426 PB CNC 5-axes contouring controller, polymer concrete monobloc machine frame, working ranges X 220mm, Y 160mm, Z 248mm, electro pneumatic tool changer, magazine for 32 tools, tool changing time approx. 3,0 sec., mid chip-to-chip period approx. 7 sec., brushless and digital drive system travel speed 6.000 mm/min., Z-axis protection by s/s lamelles, half-round sliding door offering a maximum of operator handling comfort, standard chip tray for protection of the X and Y axis, with HEIDENHAIN electronic handwheel type TNC 426 for manual adjustment of the axes, Table 365 x 240mm, Max Clamping area 350 x 230mm, Max workpiece weight 40Kg, 4th & 5th Axis attachment, Fischer Precise Spindle 42,000rpm, 2.6Kw, HSK25E Tool Adapter,  ...

milling machines / CNC Tool-Milling Machines
date: 16.01.2024 add to watchlist
approved
dealer
item-No.: 163157414
New in: 1989

used

check Seller: Osterer Werkzeugmaschínen
Location: 4853 Steinbach am Attersee Land-at
Price: VB 3.200 € add to watchlist

Maho, 700C Control : Maho 432, Built in 1989, Adapter SK40, Tool changer Method : X-700, Y-450, Z-500, Quole The machine can no longer be viewed under power. Has lost parameters ! Would also sell spare parts, table, milling head, drives, control, ...

milling machines / CNC Tool-Milling Machines
date: 21.02.2024 add to watchlist
approved
dealer
item-No.: 162945354
New in: 1989

used

check Seller: ZIEGLER Maschinenwelt GmbH
Location: Land-at
VS

add to watchlist

Maho MH 500 W3 - CNC tool milling machine - Maho CNC 332 CNC control - new LCD display - incl. instruction manual & documents - Built in 1989 Specification Workspace: - X-axis: 500 mm - Y-axis: 380 mm - Z-axis: 350 mm Workroom: - Clamping surface: 254 x 354 mm - Number of guide grooves: 1 Working spindle: - Tool holder: ISO40 - Quill stroke: 50 mm Speeds & Feeds: - Working spindle speeds infinitely variable: 20 - 5000 rpm - Feed range X, Y & Z axes: 1 - 2000 mm/min Rapid traverse: - X & Z axes: 4 m/min - Y-axis: 2 m/min Electrical equipment: - Voltage: 400 V - Total connected load: 19 kVA CNC Control: - Resolution of linear displacement measuring systems: 0.001 mm - Readings: Screen - Number of axes controlled at the same time: 2 - Number of sequentially controlled axes: 3 Weight & Space Requirements: - Dimensions WxHxD: 2235 x 1943 x 2375 mm - Weigh ...

milling machines / CNC Tool-Milling Machines
date: 19.09.2023 add to watchlist
approved
dealer
item-No.: 12764646
New in: 1982

used

check Seller: Kurt Steiger Werkzeugmaschinen GmbH
Location: Wiesbaden Land-de

add to watchlist

Table clamping surface: 630 ø mm traverse path x: 600 mm traverse path y: 450 mm traverse path z: 500 mm Quill stroke: hand 80 mm spindle retainer: ISO 40 spindle speeds: 20-3150 rpm stufenl feeds. adjustable: 1-3000 mm / min rapid traverse rate: 4 m / min. Connection: 380V kW space: 2000 + 850 x 2000 x 2000 mm weight: 3300 kg

milling machines / CNC Tool-Milling Machines
date: 19.09.2023 add to watchlist
approved
dealer
item-No.: 153915687
New in: 1984

used

check Seller: Vramac Machines bv
Location: 7327 Apeldoorn Land-nl

add to watchlist

Code 0739 DESCRIPTION CNC Universal toolroom milling machine Make Maho Model MH 700 C S/N 75915 Year 1984 Control Philips CNC 432 Table 900 x 500 mm Longitude ( X – axis ) table 700 mm Vertical ( Y – axis ) table 450 mm Cross ( Z – axis ) spindle 500 mm Spindle out ( H/V ) 100 mm Max. distance table / spindle horizontal 700 mm Max. distance spindle / table vertical 500 mm Spindle taper 40 ISO Speeds 20 – 3150 rpm Feeds X-Y-Z 1 – 3000 mm/min Rapides 6 m/min Spindle motor 8 kW - 380 Volts Accessories Table 900 x 500mm Condition Machine is in good condition

milling machines / CNC Tool-Milling Machines
date: 16.01.2024 add to watchlist
approved
dealer
item-No.: 159848720
New in: 1992

used

check Seller: WTS Maschinenhandels GmbH & Co. KG
Location: Land-de
Price: 7.600 € add to watchlist

Control Heidenhain CNC 234, Workspace: X 700 mm, Y 450 mm, Z 450 mm, Tool holder ISO 40, Pinole stroke vertical 80 mm Working spindle 2o - 4000 rpm. Power consumption 11 kVA, Weight approx. 3,600 kg, Dimensions: L 2490 x W 1780 x H 2010 mm Accessories: approx. 20 various tool holders, Machine can be viewed under power.

milling machines / CNC Tool-Milling Machines
date: 19.09.2023 add to watchlist
item-No.: 160480065
New in: 1984

used

Seller: Maschinen Stöttner
Location: Land-de
Price: VB 2.800 € add to watchlist

Universal Milling Machine Maho MH500C YOC 1984 CNC control Philipps 432 Travel X / Y / Z: 500 / 400 / 300 mm Spindle holder SK 40 Spindle speeds 20 - 4000 rpm 400 volts 50Hz. Documentation available. Space requirements: L 260cm, W 215cm, H 200cm. Weight approx. 1800kg. Machine is immediately ready for use, inspection under power possible at any time. (Errors in the technical data excepted!

milling machines / CNC Tool-Milling Machines
date: 25.02.2024 add to watchlist
approved
dealer
item-No.: 158820108

used

check Seller: Frank Sprengel Metallbearbeitungsmaschinen
Location: Land-de
VS

add to watchlist

CNC tool milling machine from a training workshop in very good condition Manufacturer Maho Type MH500E2 YOC 1991 Control 432 Color monitor Machine documents incl. parameter lists x-travel: 500 mm y-travel: 400 mm z-travel: 350 mm332 Spindle holder ISO: 40 Pinole stroke: 50 mm Spindle speeds: 20 - 5000 rpm Table surface: 355 x 800 mm Feeds x/y/z - infinitely variable: 1-4000 mm/min Total power requirement: 10 kVA Machine weight approx.: 2,1 t Special price

milling machines / CNC Tool-Milling Machines
date: 07.02.2024 add to watchlist
approved
dealer
item-No.: 152414870
New in: 1995

used

check Seller: ETAP-Development and engenering
Location: Land-si
Price: 16.500 € add to watchlist

Model MC-800VF WITH 4 TH AND 5 TH AXIS FIRST TIME IN USE FROM 1996 Brand MATSUURA Type Vertical Machining Centers Control CNC (Yasnac i80 CNC control) Table 1200mm x 400mm Power 15 hp RPM 12000 rpm ATC 30 Taper BT40 Axis 3+2 Weight APROX 7000 KG TRAVELS: X = 800mm, Y = 440mm, Z = 485mm mfg MATSUURA mpn MC-800VF Matsuura MC-800VF WITH 4 TH 5 TH AXIS MACHINE WAS WORKING IN ROLLS ROYCE FROM A NEW AND IS GREAT MANTAINED HAS NEW BATTERIES, BACKUP MADE.

milling machines / CNC Tool-Milling Machines
date: 07.02.2024 add to watchlist
approved
dealer
item-No.: 161742826
New in: 2005

used

check Seller: ETAP-Development and engenering
Location: 8000 Novo mesto Land-si

add to watchlist

Manufacturer MAZAK Model VARIAXIS 630 5X Year 2005 CNC MAZATROL 640 M 5X Table dimension 500 x 500 mm. Max Allowed Weight on table 500 kg. X Axis travel 630 mm. Y Axis travel 765 mm. Z Axis travel 510 mm. A Axis travel 150º (-120º + 30º) – 0,001º C Axis Index +/- 360º – 0,001º Turning Speed 12.000 rpm Taper SK 40 Head Power 22/15 kW Rapid Traverse X, Y, Z Axis 42.000 mm/min Max. Working Feed X, Y, Z Axis 42.000 mm/min. Rapid Traverse A, C Axis 18.000º/min Max. Working Feed A, C Axis 9.000º/min Tool Magazine Capacity 40 pos Chip-to-chip 4,5 seg. Max. tool length 400 mm. Max. tool Diameter 210 mm. Internal Coolant 20 Bar INCLUDED Chip Conveyor INCLUDED Dimension (Length x Width x Hight) 4.100 x 2.420 x 3.200 mm. Machine Weight 15.500 k ...

milling machines / CNC Tool-Milling Machines
date: 02.03.2024 add to watchlist
approved
dealer
item-No.: 157825206

used

check Seller: Sperling Werkzeugmaschinen
Location: Voerde Land-de

add to watchlist

x-travel: 900 mmy-travel: 500 mmz-travel: 500 mmControl: Heidenhain TNC 415 mx. distance bet.vert. milling head and table: 604 feed speeds infinitely variable: 2 - 3000 mm/minrapid traverse X- and Y-axis: 6000 m/minrapid traverse Z-axis: 4000 m/minturning speeds:: 21 spindle turning speed range: 40 - 4000 U/minspindle taper: ISO: 40 / M16 quill stroke: 90 mmtable dimension - longitudinal: 500 x 1000 mmnumber of T-slots: 7 workpiece weight: 500 kg0: 13,5 kwweight of the machine ca.: 3,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

milling machines / CNC Tool-Milling Machines
date: 26.02.2024 add to watchlist
approved
dealer
item-No.: 162261581
New in: 1990

used

check Seller: W&T EFRA
Location: 76661 Philippsburg Land-de
Price: VB 5.900 € add to watchlist

Milling machine MIKRON WF 71 D Year of construction: 1990 Control: Heidenhain TNC 355 Travels x = 900, Y = 500 and Z = 500 Condition: fully functional Transport dimensions: approx. H 2100mm x W 2150 mm x L 2500 mm, weight approx. 3500 KG incl. accessories, see picture +Instruction manual +Key

milling machines / CNC Tool-Milling Machines
date: 07.02.2024 add to watchlist
approved
dealer
item-No.: 160432734
New in: 2000

used

check Seller: ETAP-Development and engenering
Location: Land-si

add to watchlist

5-Axis CNC High Gantry (Top Gantry) Type Milling Machine Manufacturer Forest Liné Model Minumac TH linear Year 2000 Control Siemens Sinumerik 840D Table size 6000 x 3000 mm Table load limited by foundation Distance between the columns Distance spindle to table Travels Top gantry longitudinal X 7000 mm Milling saddle cross Y 4000 mm Z 1500mm Feeds X/Y/Z 0 ~ 20000 mm/min. C,B 0 ~ 10 rpm Rapids X/Y/Z 40000 mm/min. C,B 10 rpm Spindle I Electro Spindle Fischer MFWS 2603/18 W VCS Spindle drive motor rating 18/24 KW Spindle speed max. 18000 rpm Spindle torque max. 163 Nm Spindle changer Automatic Spindle taper HSK-A63 Spindle II Electro Spindle Fischer MFWS 1709/30/33 HF Spindle motor rating 20/22 KW Spindle speed max. 30 000 rpm Spindle torque max. 23 Nm Spindle changer Automatic Spindle taper HS ...

milling machines / CNC Tool-Milling Machines
date: 07.02.2024 add to watchlist
approved
dealer
item-No.: 159007576
New in: 2001

used

check Seller: ETAP-Development and engenering
Location: Land-si
Price: 26.500 € add to watchlist

Make OKUMA WITH A NEW SPINDEL IN 2019 - RUNS ONLY 6 MONTHS AFTER WAS CHANGED MOTOR AND SPINDLE type MX 45 VAE Year of manufacture 2001/3 CONTROLS: OSP - U100M Technical Details x-way 762 mm y-way 460 mm z-way 450 mm total power requirement 35 kW machine weight approx. 5000 KG Type: MX - 45 VAE Control: OSP - U100M working range: Axis X: 762 mm Axis Y: 460 mm axis Z: 455 mm Spindle speed range: 50 - 7 000 rpm VARIABLE SPEEDS ATC: TOOL BT 40 TOOL MAGAZINE 20 TOOLS tool magazine: 20 pcs. Total power requirement: 35 kVA LAST SERVIS ON SPINDLE ON 2019 - ( BRAND - NEW SPINDLE) COST OF SERVICE OWER 35000 EUR , MACHINE WAS WORKING FROM THAT TIME ONLY HALF YEAR. WE ORGANIZE FOR CLIENT AS WELL TRANSPO

milling machines / CNC Tool-Milling Machines
date: 28.09.2023 add to watchlist
approved
dealer
item-No.: 159657178
New in: 1995

used

check Seller: PHU GOMET -MACHINERY
Location: Land-pl

add to watchlist

TABLE 500 X 800 ISO 40 CNC1600

milling machines / CNC Tool-Milling Machines
date: 02.03.2024 add to watchlist
approved
dealer
item-No.: 162423744
New in: 1995

used

check Seller: KIRCHGEORG Werkzeugmaschinen GmbH
Location: Dreieich Land-de

add to watchlist

x-travel: 300 mmy-travel: 200 mmz-travel: 350 mmspindle taper ISO: 40 spindle turning speed range: 50 - 2500 U/mintable-size: 600 x 250 mmtable load: 75 kgpower capacity: 1,5 kWquill stroke: 80 mmvoltage: 400 Vfeed: 8 - 400 mm/mintotal power requirement: 4 kWweight of the machine ca.: 950 kgdimensions of the machine ca.: 1,70x1,30x1,20 mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information