Semi automatic cartoning machine for 10 kg. Cartons. Output: 160 cartons / h. Machine used, completely overhauled, newly painted.
Top maintained machine Bosch Cartonetta 75 horizontal Carton dimensions: 155 x 70 x 50 Width variable, double chain
CAM AV vertical wiper Insertion of folded leaflets Opening sword cases For cases with alternate reentrant legs and opposite reentrant legs
CARSOE ANY TRAY CLEANLINE DENESTER (2018) VERY GOOD CONDITION COMPLETE WITH TROLLY FOR SPARE HEADS
Harro Höfliger Cartonetta horizontal end-load cartoner, with hand fed bucket infeed, including flat sheet leaflet folder, glue closure with Nordson ProBlue 4 hot melt unit, carton size range min. 15 x 15 x 54 mm, max. 92 x 66 x 180 mm, output up to 75 cartons per minute (2000 overhauled by Harro Höfliger)
Harro Höfliger MKT 120 horizontal end load cartoner, intermittent motion, bucket infeed, with GUK FA21/4 Cartonac 91 leaflet feeder, glue closure with Nordson ProBlue 4 hot melt unit, minimum carton size 15 x 15 x 60 mm up to maximum 100 x 80x 200 mm, mechanical output up to 120 cartons per minute.
Used cartoner Höfliger + Karg (Bosch) CARTONETTA. New 1975. Dimensions: lenght 2850 mm + ca. 3000 mm conveyor width 1100 mm height 1600 mm weight 450 kg. Voltage: 380V with a power socket Machine speed: up to 50 cartons per minute Folding the leaflet: 3 or 4 fold the sheet. Dimensions for folding leaflets: 3 - fold: from 90 x 90mm to 210 x 210mm 4 - fold: from 90 x 90mm to 297 x 210mm Carton length: 50 - 180mm Carton width: 15 - 80mm Carton height: 16 - 60mm
Item condition Maintained Availability Right away Construction No. 294
• IWK cartoning machine CP150 Further information on request
Used semi-automatic vertical cartoner, production: Jacob u. Weinmeier Industrietechnik GmbH Germany. Dimensions of the carton: 36.5 x 36.5 x 118 mm. New: 1994.
Used KAR 1 cardboard box closing machine. The device is used to automatically insert the tube into the cardboard box. The cartons are previously unfolded and pressed into special slots on the chain conveyor. The box passes through the individual slots, activating subsequent actuators closing the box. At the end of the transporter there is a receiver that takes out the cardboard boxes. Packaging of 3 pieces takes place on the conveyor belt, and then it is turned by 90 degrees and taken out of the machine.
Used case packer for open tray Manufacturer: M.A.S. Automation AS Year of construction: 06/2006 Cardboard is pre-folded from a flat cut, filled and then folded around the product. Bonding by means of hot glue. Stepless adjustment units Product inlet belt incomplete. 100 products/min Control cabinet: Rittal, V2A Pneumat. Festo Gluing device Nordson Geared motors SEW Frame stainless steel Mech.+electr. Standard parts: Branded products 2 emergency stop switches, safety photoelectric sensors The facility can be visited in Bremen. Please make us a best offer. Sale only to traders with invoice. All used machines are sold to the exclusion of liability for material defects. Collection or shipping against assumption of costs.
Automatic, Continuous motion Horizontal Cartoner Marchesini MA 150 Continous motion horizontal cartoner, entirely made with balcony construction, designed around three basic concepts: versatility, ergonomics and maximum efficiency in a small footprint. Because of its characteristics it is the ideal solution for packaging cosmetic and pharmaceutical products. The Model MA150, working with intermittent motion, is indicated for some product types. Main features: Balcony construction, as per GMP norms All feeding groups are located in ergonomic position, in order to make the loading easy for the operator All main drive mechanism are in oil bath, thus reducing maintenance and noise level Easy and fast changeover, entirely made from operator side Touch Screen control panel, for operator interface and machine management Self diagnosis and help functions Possibility to install an au ...
Cartoner, MARCHESINI Model: MARCHESINI MA155, Acquisition year: 2002, SAP id 20053666. Note: Asset Available Mid 03/2023 From the flowwrapper, individual pouches containing single nebules are stacked and placed into cartons. Barcodes on the cartons are scanned by the same Argus barcode reader in the blister packer to ensure they are correct for that market. Leaflets are folded by GUK leaflet folder, which is integrated with the cartoner. The Cartoner automatically stacks the pouches, folds the cartons, inserts an instructional leaflet (if required), places the pouches into the cartons, and closes the lids on the cartons.
2006 Marchesini Cartoner, Model No: MA320, Serial No: M3050043 (SAP 23022138) With Nordson Problue 7 Hot Melt Adhesive, Serial No: SA06A25520 And Nordson Eclipse Series Pattern Control System, Model: EPC30, Serial No: CA05M00015. Filled labelled tubes and diskhalers are automatically fed into the cartoner via the tube unloader/labeller and diskhaler unloader respectively. Leaflets and cartons are fed manually into their respective magazines. Tubes and diskhalers are picked up from their respective belts by a feed unit which places them onto the product chain conveyor of the cartoner. A carton is formed and the tubes, diskhaler and leaflet are inserted into the carton. Also a leafsert is pre-attached to the carton for Japan. If there is no carton or leaflet, the content (tube and diskhaler) will be rejected. If faulty barcode for carton, leaflet or leafsert is detected product wi ...
Cartoner, Marchesini, Model number: MAlSS, Serial number: M3118000, Manufactured: 2011. Siemens Simatic Panel, Argus Laetus, Siemens Simatic OP17, Perspex Guarding, 3 Phase, 415 Volt. Note: Asset Available Mid 11/2022 Cartoner that automatically erect, fold and closes the carton, while inserting the product (group multiple product) and leaflet (also booklet). the cartoner has functionality of scanning the barcode on the leaflet carton
The machine packs in full cartons or trays. Capacity up to 80 cartons per minute. The change to the new carton format takes place from the operator panel - very quickly. Siemens S-7 control. Machine dimensions: Length: 9m Maximum width: 3.2m Height: 2.4 m. Weight: 3.5 tonnes The machine is equipped with a set of necessary spare parts for 2-3 years of operation. The machine after complete renovation in very good condition. Ready to work. We provide 12 months warranty. The condition of the machine and the level of modernity ensure many years of operation.
Used cartoner for winding boxes
Carton setters Carton dimensions (mm) min. / max. Length (L) 220 / 600 Width (B) 100 / 500 Height (H) 100 / 500 Machine overhauled at the factory, with warranty on replaced parts.
Cardboard set-up with cardboard magazine and adhesive tape unit. Suitable for straightening folding cartons
Romaco-Promatic P91S horizontal intermittent motion cartoning machine for strips, sachets, etc. carton size range min. 15 x 15 x 60 mm (AxBxC), max. 95 x 70 x 160 mm, capacity up to 140 cartons per minute, pre-folded leaflet inserter, ink deboss coder (2 lines each up to 12 digits), glue closure of the carton flaps using a Nordson ProBlue Type 7 hot glue unit, bar code reader for leaflet and carton, includes Romaco-Siebler FlexTrans FT1-400 with two (2) ABB FlexPicker robots for the automatic transfer of the strips, etc. from the belt into the infeed of the cartoner, product format range: pack width from 40 to 120 mm, pack length from 45 to 200 mm, stacking height up to 80 mm, capacity up to 375 packs per minute
Carton setters and floor closures Power: Max. 8 cartons/minute Carton length: Min. 300 mm - max. 620 mm Carton width: Min. 200 mm - max. 400 mm Carton height: Min. 220 mm - max. 450 mm
Sollas S60 wrapper for cardboard packaging The plant was built in 2007 by Sollas Deutschland GmbH & Co KG. Since then it has been used for packing cartons. It has a product retraction function, so that folding boxes can also be welded with feet. ” Aggregate: wrapper s60 60 pcs. /min. Film rollers: Max. Outer diameter 400 mm Max. Roll width 435 mm Min. Internal diameter 70 mm Max. Internal diameter 83 mm Min. Cutting length 50 mm Max. Cutting length 750 mm Dimensions of the packaged goods: Length: 40 mm/300 mm Width: 20 mm/200 mm Height: 16 mm 96 mm According to the information provided by the manufacturer, the machine is designed for the following packaging materials: - Coated paper - PP - PE The machine is designed for the complete or partial packaging of products. Unpackaged food is not compatible.
Uhlmann C100 horizontal cartoning machine - fully automatic bottle packaging and simultaneous feeding of Package leaflets - power 100 FS/min - Bottle length max. 150 mm Format: L= 70 x 150mm W= 30 x 90mm H= 15 x 85mm New hardware and software PLC Mitsubishi control and 8 inch color touch panel mechanically overhauled Optional: - GUK brochure folder 4-fold folding - Cognex 1D barcode and 2D matrix code reading system for leaflets and carton code - Luminizer control, attendance check for package inserts in folding boxes - Embossing station - Brochure pre-insertion - Vacuum pump / venturi nozzle
Uhlmann C 100 modified fully automatic blister Strip packaging and simultaneous feeding of leaflets 2016 - horizontal cartoning machine -Max power 100 FS / min Format: L = 70 x 150 mm B = 30 x 100 mm H = 15 x 85 mm New hardware and software PLC Mitsubishi control and 8 inch color touch panel Accessories: -GUK leaflet folding apparatus 4 Pocket fold -Cognex 1 d barcode and 2D matrix code reading system for prospectus leaflets and folding box code -Luminizenskontrolle, presence control for leaflet in folded box -Stamping station -Prospectus before insertion -Vacuum pump
