1000 offers

maximum number of results exceeded > 1000
please refine your search

Category: 202
item-No.: 126876116
1995
1.092 €
-
Technical data: Brand: Ott Type: Rondomat R/260 Workpiece thickness 8-40 mmgeeignet for all commonly used edge above stand be milling Copy milling machine for flush milling, chamfer milling and mill RADIUS 0.5 kW Weight ca: 100 kg
Category: 107
item-No.: 126880047
2005
used machinery auction RESALE 6.650 €
Land-de DE
Weight approx.: 500 kg Dimensions (l x w x h) approx.: 1150 x 800 x 1400 mm Description: GSW RMA 40/74 Straightening Machine. machine no.: 1144, passage width 400 mm, strip thickness 0,4 up to 2,3 mm, strip thickness with fully width 2,5 mm, cross section max. 400 x 1,9 mm, 7 straightening rollers hard-chrome plated, distance between straightening rollers 60 mm, 2 pull-out rollers, roller diameter 40 mm, speed 5 up to 30 m/min, passage height over floor approx. 1200 mm, noise level 70 db(A), drive power 1,5 kW, ele ...
Category: 107
item-No.: 126869328
Technical data: -Clamping width 115 mm -Clamping height 150 mm -Cutting length 0-35 mm -maximum wall thickness for aluminium + PVC hollow profiles 4 mm - spindle speed approx. 18000 RPM -Pneumatic connection 6-7 bar -Drive 400 V / 1,8 kW -Space requirement approx. B 650 x H 1550 X 850 mm -Weight approx. 300 kg
Category: 107
item-No.: 126880051
2014
used machinery auction RESALE 14.000 €
Land-de DE
Weight approx.: 500 kg Dimensions (l x w x h) approx.: 600 x 2000 x 1270 mm Description: GSW WV 25/80 Roll Feed. machine no.: M 2014-00463, strip width 250 mm, strip thickness 0,5 up to 4,0 mm, strip thickness with fully width 3,0 mm, cross section 250 x 3,5 mm, roller diameter 80 mm, height adjustment approx. +- 50 mm, noise level 70 db(A), type of drive three-phase servo motor, drive nominal torque 15 Nm, gear ratio 7, electrical connection 3 x 400 V, 50 Hz. The machine is equipped with Topochrom feed rollers, se ...
Category: 804
item-No.: 126869273
HEIDELBERG SM52-4 LX(36 x 52cm), Age c.2007, serial no.GS000206, circa 27 million, Press Centre, Anicolor, Preset, Autoplate, 0.6mm thickness option, Electronic 2 sheet detection, Eltex anti static equipment, Programmable roll/bla/imp. cyl. wash via CP2000, Grafix alphatronic 200 powder spray, Technotrans Handy cam ink line x 4, Tresu cameracle coater, Heidelberg Dry Star IR Dryer, Technotrans Alpha C Combistar refrigeration/ ink temp control.
Category: 107
item-No.: 126880053
2014
used machinery auction RESALE 27.300 €
Land-de DE
Weight approx.: 1200 kg Dimensions (l x w x h) approx.: 1050 x 2250 x 1860 mm Description: GSW RMA 16/118 Straightening Machine. Machine no.: M 2014-00539, passage width max. 160 mm, strip thickness 1,0 up to 5,0 mm, strip cross section max. 160 x 4,0 mm, high edge up to 50 x 5,0 mm, material strength 520 N/mm², diameter of straightening roller 80 mm, distance between straightening rollers 130 mm, 11 straightening rollers, out-feed roller diameter 80 mm, 2 out-feed rollers, passage height over floor approx. 1200 m ...
Category: 821
item-No.: 126869196
Auto loader SA L4100 / / M.Nr.: 165 / / year of manufacture: 2004 Plate transport: Automatic, Cartridge capacity: 50 sheets Cleaning function: cleaning rollers Power: Single phase 200-240 V Plate Rite 4100 with disk dance system Recording system: External drum Light source: 16-channel infrared laser diodes Panel sizes: 830 x 660 mm / / min: 324 x 370 mm Media: Thermal plates Media thickness: 0.15-0.3 mm Resolution: 2400/2438/2540 dpi Productivity: 10 plates per hour at 2400 dpi Plate stackers: Advanced ...
Category: 107
item-No.: 126880057
1973
used machinery auction RESALE 950 €
Land-de DE
Weight approx.: 1800 kg Dimensions (l x w x h) approx.: 1400 x 1000 x 1800 mm Description: Section Shear Round steel 35 mm Square steel 32 mm Angle steel 80 x 9 mm Hole diameter in sheet thickness 20 in 13 mm Punching machine: printing capacity 35 t Punch: projection 320 mm Punching punch: gr. Stroke length 24 mm Punch: Capacity (dr.x thickness) 25 x 11 mm Punch: Capacity (dr.x thickness) 20 x 13 mm Total power requirement 1.5 kW Machine weight approx. 1.8 t Space required approx. 1.4 x 1.0 x 1.8 m
Category: 804
item-No.: 126869194
REF. No.: 21019.18 Type. Nr: 12014 / / JG: 2003 / / counter (million): 73.3 / / performance prints 12000 B / h Size (cm): paper size: 38 x 52 Pressure range: 37 x 51, 5 Number of colors: 4 Dampening: Conventional twist: 2/2 Equipment / additional information: Sch.: 3157703 V: 400 A: 43 kVA: 25 Maximum printing area 370 x 515 mm Weight of the printing paper 30-350 g / m² Maximum thickness of paper 0.4 mm Print edge 0.9 mm Dimensions of the printing form 0.15 x 521 x 415 mm Dimensions of the offset  ...
Category: 1900
item-No.: 126880077
2007
used machinery auction RESALE 350 €
Land-pl PL
Weight approx.: 150 kg Dimensions (l x w x h) approx.: 1800 x 600 x 1600 mm Description: METALLKRAFT HSBM 1300 N Workshop Equipment - model: HSBM 1300N - serial number: 41146 - max. bending length: 1300 mm - max. sheet thickness: 1,2 mm - for further details see pictures
Category: 107
item-No.: 126860788
2013
3.500 €
-
Work range approx. 1,050 mm x 3, 0 mm Before turn 3, 0 mm Max material thickness 3.3 mm Reel diameter approx.: 90 mm to the conical rollers with foot pedal Motor 1,1 kW Side swing-out top roller Main motor with brake With wheel up and down moving behind and front roll, Separate from the machine, mobile control panel and foot pedal Weight 570 kg
Category: 107
item-No.: 126879916
2006
used machinery auction RESALE 22.500 €
Land-ch CH
Weight approx.: 15500 kg Dimensions (l x w x h) approx.: 0 x 0 x 0 mm Description: Laser cutting machine was rebuilt and revised in 2013, operating hours according to report from 16 June 2017 approx. 15025h, cutting hours 6291h, travel paths/ cutting ranges X= 1562mm, Y= 772mm, Z= 100mm, max. plate size 752x1542mm, load capacities infeed table= 300 kg, cutting table= 80 kg, position deviation PA= +/-0,1mm, position scattering range = +/- 0,05mm, position speed (X+Y) = 100m/min, max. laser capacity 2200W, material t ...
Category: 107
item-No.: 126853966
Operating hours: 12981 h Material: Stainless steel: max. tensile strength : 600 N/mm² min. sheet thickness: 0.50 mm max. sheet thickness: 1.25 (1.00) mm Steel: max. tensile strength : 410 N/mm² min. sheet thickness: 0.50 mm max. sheet thickness: 2.00 (1.50) mm Aluminiuma max. tensile strength : 265 N/mm² min. sheet thickness: 0.50 mm max. sheet thickness: 3.00 (1.50) mm Minimum and maximum dimensions of the sheets (punched blanks): Dimension [mm]: ABA 30/400/130 Length min./max: 4 ...
Category: 207
item-No.: 126879942
1998
used machinery auction RESALE 4.000 €
Land-de DE
serial number: 0-261-03-8744 Weight approx.: 1200 kg Dimensions (l x w x h) approx.: 4600 x 1300 x 1700 mm feed: 11 m/min edge thickness: 0,4 - 8 mm workpiece thickness: 8 - 50 mm gluing unit: Quick Melt-Verleimteil für Schmelzkleber snipping unit: 2 Motoren je 0,27 kW, 200 Hz, 12.000 U/m rough trimming unit: 2 Motoren je 0,27 kW, 200 Hz, 12.000 U/m fine trimming unit: 2 Motoren je 0,35 kW, 200 Hz, 12.000 U/m flat scraping unit: ja/ yes edge buffing unit: 2 Motoren je 0,09 kW workpiece width min.: 70 mm Descriptio ...
Category: 821
item-No.: 126838763
-
1.400 €
-
General data Reference no: 3624 Manufacturer: de count GROUP Type: Photopolymer platemaking PA350N2 . No.: 2406 Year of construction:? Shipping time: Immediately Description: Technical features Exposure â?¢ Î?lack acrylic plate with vacuum grooves and a vacuum sheet perfectly hold the negative to the plate â?¢ 6 lamps type TL 44 D 25W â?¢ With internal memory of the lamps life to help determine when it's time to replace them. Washout â?¢ nylon  ...
Category: 107
item-No.: 126879948
2004
used machinery auction RESALE 7.000 €
Land-de DE
Weight approx.: 2500 kg Dimensions (l x w x h) approx.: 2070 x 2070 x 1760 mm Description: AMT HSR 10/1500 Straightening Machine. Machine no.: 2236/7431, strip width 1000 mm, strip thickness 0,5 up to 1,2 mm, cross section max. 1000 x 2,0 mm, 9 straightening rollers diameter 60 mm, 2 pneumatic feed rolls, diameter 120 mm, passage height 1200 mm, right- and left sided conveyor direction, noise level according to manufacturer 70 db(A), servo-drive, drive power approx. 15 kW, connection voltage 230/400 V. The machine  ...
Category: 801
item-No.: 126838745
-
3.000 €
-
Basic data Reference number: 3577 Manufacturer: Hamada Type: Hamada Alpha 52 . No.: GA 1D003 Year of constr.: approx.: 1993 Shipping time: Immediately Price (ex. VAT): EUR 3.000,00 Price (gross): 3.570,00 EUR (incl. 19% tax Excl. shipping costs) Question about the product Facilities: Weight: 1800 kg Size: 191cmxB130cnxH156 Power supply: Not specified Power: 3 kw Sheets per hour: 10000 Sheet size (max): 365 x 520 Damping: conventional dampening largest print area: 515 x 350 mm Smallest bow: ...
Category: 107
item-No.: 126879951
2003
used machinery auction RESALE 2.000 €
Land-de DE
Weight approx.: 1008 kg Dimensions (l x w x h) approx.: 1950 x 750 x 1500 mm Description: SCHECHTEL MSB 150 Guillotine Shear. Fabrication no.: MT 7481, cutting length 1540 mm, sheet thickness at steel 400 Nmm² 3,50 mm, at aluminium 250 Nmm² 5,5 mm, VA 600 Nmm² 2,25 mm, power 3 kW, voltage 3 x 400 V, 50 Hz, passage height table increased to 1200 mm, cutting angle 2°53. The machine is equipped with continous hold-down clamp and german language documentation. Without backstop, frontal support arms and foot switch. ...
Category: 833
item-No.: 126838737
2003
7.900 €
-
General data Reference number: 3974 Manufacturer: HORIZON GmbH Type: SPF FC 20A 20 a . No.: 141022, 064013 Year of construction: 2003 Shipping time: On request Description: Brochure production - technical data Formats stapler/Falzer SPF 20a min. 210 x 180 mm / folded 180 x 120 mm Max 420 x 297 mm / folded 500 x 300 mm Processing thickness of min. 2 sheet Max: 4 mm Formats of trimmer FC-20a min. 85 mm 250 x 20mm Processing thickness min. 4 pages, maximum 88 pages Expansion options: (OPTIONAL ...
Category: 702
item-No.: 126876699
semi automatic, working width 400 mm, thickness 10 mm,\r\nlubrication system for the knives
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more types: