british flag
Resale Logo

TORNOS used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used shelves and storage equipment  eth "ERICUS" Transport- und Handelsges. m.b.H.  http://www.regalbautechnik.de 
banner logo
start page > keywords TORNOS > results
662 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14
113394712 102

DEFUM KNA 110 for sale
Carousel Turning Machines (Lathes)


Max turning diameter: 1350mm Max. turning diameter with side carriage: 1100mm Table diameter: 1100mm Max. turning height: 950mm Max. table load: 4000kg Main motor power: 30kW Voltage: 380V Frequency: 50Hz Machine ...

 
Max turning diameter: 1350mm
Max. turning diameter with side carriage: 1100mm
Table diameter: 1100mm
Max. turning height: 950mm
Max. table load: 4000kg
Main motor power: 30kW
Voltage: 380V
Frequency: 50Hz
Machine dimensions: 2750 x 2350 x 3100mm
Machine weight: 11000kg
 
6,700 €  
  PL   request
113386449 102

REIDEN R 200 for sale
Turning Machines (Lathes)


-Three jaw Chuck - 3 holder -Live -Chuck Tip height 200 mm Top width 800 mm Rotation Ã? over slide 235 mm over bed 425 mm Speed 45-2240 Rev/min Recording camlock D6 "spindle bore 45 mm face and long ...
used machine
 
-Three jaw Chuck - 3 holder
-Live
-Chuck

Tip height 200 mm
Top width 800 mm
Rotation Ã?
over slide 235 mm over bed 425 mm
Speed 45-2240 Rev/min
Recording camlock D6 "spindle bore 45 mm face and longitudinal feed 0.05 2.8 mm / Rev
Ã? of the tailstock Quill 55 mm
Morse taper of spindle and tailstock MK 4
Spindle motor 8 HP
 
Price  
  CH   request
113385013 102

COLCHESTER Triumph 2500 for sale
Turning Machines (Lathes)


-Digital display HEIDENHAIN -Steel holder of ʺBöhniʺ type 100 -div. accessories available Tip height 195 mm Top width 1250 mm Spindle bore 54 mm speed range 15-2500 RPM Spindle retainer D1- ...
used machine
 
-Digital display HEIDENHAIN
-Steel holder of ʺBöhniʺ type 100
-div. accessories available
Tip height 195 mm
Top width 1250 mm
Spindle bore 54 mm speed range 15-2500 RPM
Spindle retainer D1-6 "camlock
Weight 1500 kg
 
Price  
  CH   request
113228942 102

TORNOS R10 for sale
Lathe


2 used Automatic Curve Lathes TORNOS R10. Turning diameter 10mm, turning length 60mm, spindle passage 10mm. Equipment: 1 machine with with 3-spindle drilling unit 13Y, spindle stop, index, rear drilling and slotting unit ...
used machine
 
2 used Automatic Curve Lathes TORNOS R10. Turning diameter 10mm, turning length 60mm, spindle passage 10mm. Equipment: 1 machine with with 3-spindle drilling unit 13Y, spindle stop, index, rear drilling and slotting unit, magazine BARBOY 29AA. 1 machine with 3-spindle drilling unit 13Y, rear drilling and slotting unit, gripper 34DA with wire rope hoist, magazine BARBOY 29AA.
 
Price  
  DE   request
113228940 102

TORNOS MS7 for sale
Lathe


5 used Automatic Curve Lathes TORNOS MS7. Turning diameter 10mm, turning length 60mm, spindle passage 10mm. Equipment: 2 machines with 3-spindle drilling unit 13Y, gripper, rear drilling, magazine Barboy 29AA. 1 machine  ...
used machine
 
5 used Automatic Curve Lathes TORNOS MS7. Turning diameter 10mm, turning length 60mm, spindle passage 10mm. Equipment: 2 machines with 3-spindle drilling unit 13Y, gripper, rear drilling, magazine Barboy 29AA. 1 machine with 3-spindle drilling unit 13Y, spindle stop, transversely drilling, gripper and slotting unit, magazine Barboy 29AA. 1 machine with 3-spindle drilling unit 13Y, spindle stop, transversely drilling and slotting unit, magazine IEMCA CS112. 1 machine with gripper and rear drilling, magazine IEMCA Elite e 112.
 
Price  
  DE   request
113228895 102  

WEILER Praktikant 160 B for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


Tip height: 160 mm centre distance: 650 mm circular diameter: over bed 320 mm spindle bore: 40 mm spindle retainer: Gr. 5 taper tailstock: 3 MK spindle speed: 48 - 2500 rpm feeds: longitudinal/plan 0.02 0.63/0,006 0.2 mm ...
used machine
 
Tip height: 160 mm centre distance: 650 mm circular diameter: over bed 320 mm spindle bore: 40 mm spindle retainer: Gr. 5 taper tailstock: 3 MK spindle speed: 48 - 2500 rpm feeds: longitudinal/plan 0.02 0.63/0,006 0.2 mm / U thread pitches: 0.25-8 mm electrical connection: 400 V, 2.4/3 kW space: 1600 x 850 x 1300/1550 mm weight : 700 kg
1996
Price  
  DE   request
112998850 102

WEILER Commodor 75 for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


Tip height: 190 mm Top width: 1000 mm Swing over bed: 380 mm Swing over cross slide: 190 mm Spindle bore: 56 mm Speed range: 25-2000 RPM Engine power: 7,5 kW Dimensions Lxwxh: 2350 x 1040 x 1400 mm Weight: approx ...
used machine
 
Tip height: 190 mm
Top width: 1000 mm
Swing over bed: 380 mm
Swing over cross slide: 190 mm
Spindle bore: 56 mm
Speed range: 25-2000 RPM
Engine power: 7,5 kW
Dimensions Lxwxh: 2350 x 1040 x 1400 mm
Weight: approx. 1650 kg

Facilities:
3-jaw lathe Chuck with JAWS
4-jaw lathe Chuck Röhm with JAWS
Hand pressure collets with 9 collet chucks
Quick change holder head system multifunction fixed with 2 inserts
fixed bezel
2 revolving centres
Drill chucks with taper mandrel
Round grinding device for external grinding
Coolant system
 
Price  
  DE   request
112998807 102

BOEHRINGER NG 200 for sale
CNC Turning Machines


CNC lathe Manufacturer: Boehringer Type: NG 200 Year of construction: 2003 Runtime: 9767 h control: Siemens Sinumerik 840 d Turning length: 850/1850 mm Swing over bed: 600 mm Spindle bore: 65/103 mm Chuck diame ...
used machine
 
CNC lathe

Manufacturer: Boehringer
Type: NG 200
Year of construction: 2003
Runtime: 9767 h control: Siemens Sinumerik 840 d
Turning length: 850/1850 mm
Swing over bed: 600 mm
Spindle bore: 65/103 mm
Chuck diameter: 200/250/310 mm

Power: 53kW (40% ED)
Speed range up to: 4500/3000 rpm power: 65KVA space: 4280 x 2460 x 2575 weight approx.: 10,000 kg tool carrier number tool carrier: 3 WZ intake per turret: powered 12 of them per Rev: 12
Cylindrical shank DIN69880: VDI40

Accessories:

-Lathe chucks, SCHUNK THW
-Coolant spray gun
-Tool holders with: axial 4 x, 6 x radial, 25 x inner holder, 30 x outer holder;
-Manual
-Documentation

Errors excepted

2003
Price  
  DE   request
112265652 102

CZ 300 A for sale
Turning Machines (Lathes)


Lathe with table From site WeiÃ?wasser Sale and errors reserved Questions under 0049 172 - 79 66 561
used machine
 
Lathe with table

From site WeiÃ?wasser
Sale and errors reserved

Questions under 0049 172 - 79 66 561
 
Price  
  DE   request
112100985 102

VOEST DA 210 for sale
Rotating Benches


Maximum turning length 1000 mm Maximum swing over bed 435 mm Maximum turning diameter over support 260 mm Spindle diameter 46 mm Spindle power 7.5 kW Minimum speed of spindle 21 1/min Maximum speed of the spindle 1 ...
used machine
 
Maximum turning length 1000 mm
Maximum swing over bed 435 mm
Maximum turning diameter over support 260 mm
Spindle diameter 46 mm
Spindle power 7.5 kW
Minimum speed of spindle 21 1/min
Maximum speed of the spindle 1500 1/min
Lathe weight approx. 1.2 t
3 - jaw Chuck, quick change holder
 
Price  
  DE   request
111928627 102

KB-1811 WMW DPS 1800 x 1000 for sale
Thread Turning Machines, External


Plan lathe, used machine, Max Ã? 2000 mm x 1000 mm, 23 kW Article number: KB-1811 Brand: WMW Model: DPS 1800 x 1000 Series No.: on request Capacity (kW): 23 Voltage: 380-220 Frequency (Hz): 50 Rpm: 18 sp ...
used machine
 
Plan lathe, used machine, Max Ã? 2000 mm x 1000 mm, 23 kW

Article number: KB-1811
Brand: WMW
Model: DPS 1800 x 1000
Series No.: on request
Capacity (kW): 23
Voltage: 380-220
Frequency (Hz): 50
Rpm: 18 speeds of 1.4-71
Amperes (A): 50
Dimensions Lxwxh (mm): 3800 x 2350 x 2350
Stucco number in stock: 1
Weight (kg) ca: 12800
Tip width (mm): 1000
Ã? bushings axis (mm): 100
Ã? maximum turning diameter (mm): 2000
Made in: Germany
Comments: Heavy duty facing lathe directly builded out in working order, 1800mm jaw chuck, old but tidy machine
1970
4,200 €  
  CZ   request
111927429 102

MAZAK Integrex 30 for sale
CNC Turning Machines


Here, we offer a MAZAK INTEGREX 30 CNC turning machine - driven tools -programmable bezel -Y-axis Yi7lrh3m3 Built in 1996 Serial number: 124257 Recording KM63/SK40 40 x tool changer Chuck dia. 315 T-plus contr ...
used machine
 
Here, we offer a MAZAK INTEGREX 30 CNC turning machine - driven tools
-programmable bezel
-Y-axis
Yi7lrh3m3

Built in 1996
Serial number: 124257
Recording KM63/SK40
40 x tool changer
Chuck dia. 315
T-plus control
Main spindle RPM 3500 RPM
Spindle speed 6000 RPM fully functional
Good used condition

The lathe can be visited by appointment like locally and tested.
1996
45,000 €  
  DE   request
110790703 102

O-M TDC 12N for sale
Vertical Turning Machines With Pick-Up Spindle


Control Fanuc 18iT Table 1250mm Max. Swing 1600mm Z stroke 1100mm Max. Height of the Work piece 1245mm Max. Loading capacity on table 8000kg Fixed Cross Rail type Table speed 2 ~ 350rpm Table motor AC 3 ...
used machine
 

Control Fanuc 18iT

Table 1250mm
Max. Swing 1600mm
Z stroke 1100mm
Max. Height of the Work piece 1245mm
Max. Loading capacity on table 8000kg
Fixed Cross Rail type
Table speed 2 ~ 350rpm
Table motor AC 30/37kw
Live spindle AC 11/15kw
Automatic tool changer 8pc for Turning tool and 16pc for live tooling
1998
Price  
  KR   request
110785661 102

HARRISON ALPHA 550 for sale
CNC Cycle Turning Machines


Lathe - cycle controlled HARRISON ALPHA 550 make HARRISON type ALPHA 550 year 1998 State second-hand machine CNC CNC GE FANUC ALPHA storage HAGUENAU country of origin United Kingdom delivery immediately cargo base camp,  ...
used machine
 
Lathe - cycle controlled HARRISON ALPHA 550 make HARRISON type ALPHA 550 year 1998 State second-hand machine CNC CNC GE FANUC ALPHA storage HAGUENAU country of origin United Kingdom delivery immediately cargo base camp, free loaded truck technical details swing 554 mm turning length 2000 mm CNC GE FANUC ALPHA peak height 280 mm swing up over facing slide 370 mm swing in the offset 830 mm spindle bore 90 mm spindle speeds 15-1800 rpm spindle nose D 1-8 " Camlock spindle motor 11 kW feeds - along 0.03 - 0.4 mm / Rev plan feeds - 0.015 - 0.2 mm / Rev rapid traverse - longitudinal/plan 3 / 1.5 m / min thread - mm pitch 14 mm bed width 400 mm plan slider route 310 mm tailstock Quill diameter 95 mm tailstock Quill stroke 145 mm tailstock recording MK 6 tailstock transverse displacement from the middle position +/-10 mm dimensions L x W x H 3.55 x 1.62 x 2.32 m total power consumption 24 kVA machine weight approx. 3.1 t description-----------Brü crackers-

Accessories: 4 - jaw Chuck 500 mmø, MULTI FIX steel holder with various inserts, coolant system
1998
17,500 €  
  FR   request
110448302 102

RAMO T 42 for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


Center and lathe RAMO T 42 L-Nr. 1105-02280 make RAMO type T 42 year 1989 State second-hand machine control conventional storage France delivery immediately cargo base of country of origin France from site more info on r ...
used machine
 
Center and lathe RAMO T 42 L-Nr. 1105-02280 make RAMO type T 42 year 1989 State second-hand machine control conventional storage France delivery immediately cargo base of country of origin France from site more info on request technical details turning diameter over bed 420 mm turning diameter over support 210 mm turning length 1500 mm centre height 120 mm spindle bore 80 mm spindle speeds 25-2000 RPM total power consumption approx. 15 kW machine weight approx. 1.5 t space approx. 2100 x 1200 x 1400 mm

Description rapid motion for longitudinal and flat.
Accessories: coolant system with chip tray in the machine bed, foot brake, quick change Toolpost, three-jaw-Chuck 250 mm dia.
, Operating instructions.
1989
4,000 €  
  FR   request
110443390 102

COLCHESTER Student VS 3000 for sale
Turning Machines (Lathes)


Accessories available Digital display tip height 167 mm Top width 635 mm or 1000 mm Diameter over bed 330 mm diameter over cross slide 210 Spindle bore 38 mm Morse taper in spindle sleeve No. 3 Width of bed tracks  ...
used machine
 
Accessories available
Digital display tip height 167 mm
Top width 635 mm or 1000 mm
Diameter over bed 330 mm diameter over cross slide 210
Spindle bore 38 mm
Morse taper in spindle sleeve No. 3
Width of bed tracks 190 mm
The cross slide width 140 mm
Cross slide travel 190 mm
Width of the upper slide 82 mm
Travel of the upper slide 92 mm
Tailstock Quill:
-Diameter 42 mm
-Travel 110 mm
-Morse taper No. 3

Spindle speeds stepless adjustable AC inverter drive

Technical details / accessories / additional
Text value unit

Three manually selectable ranges 3000-750 RPM
(Continuous load availability) 975-244 RPM 215 - 54 RPM

Rated motor power 4 kW (5.36 HP)
Lead screw diameter 28 mm
Lead screw thread pitch of 6 mm or 4 TPI

Thread:
39 metric thread pitches 0.2 to 14 mm
35 inch thread pitches 2-56 TPI
18 modular climbs 0.3 to 3.5
18 DP grades 8 to 56

Feed rates:
16 x metric (series R10).03 to 1 mm / Rev
16 x inch.001 up.40 inches / U
Schedule feed - half of the longitudinal feed rates
 
Price  
  CH   request
110274404 102

CITIZEN L20 for sale
Longitudinal Turning Machines (Lathes)


Automatic lathe Manufacturer: Citizen Type: L20 Year of construction: 2000 Available now!
used machine
 
Automatic lathe
Manufacturer: Citizen
Type: L20
Year of construction: 2000
Available now!
2000
Price  
  DE   request
109244953 102

VICTOR V TURN 15 PLUS for sale
CNC Turning Machines


CNC lathe - inclined bed machine VICTOR V TURN 15 la no. 1105-00793 make VICTOR type V TURN 15 built in 1996 State second-hand machine CNC CNC Fanuc 0 T storage France country of origin TAIWAN delivery immediately cargo  ...
used machine
 
CNC lathe - inclined bed machine VICTOR V TURN 15 la no. 1105-00793 make VICTOR type V TURN 15 built in 1996 State second-hand machine CNC CNC Fanuc 0 T storage France country of origin TAIWAN delivery immediately cargo base factory free truck technical details turning diameter 220 mm turning length 320 mm CNC Fanuc 0 T speed 6000 RPM feed 7.5 / 15 m / min spindle hole 52 mm turret (x-fold) 12 description VICTOR VT 15 PLUS
FANUC OT
3 BEACON FEED FEED
TAILSTOCK



1996
13,500 €  
  FR   request
109244937 209

HAGER HD 50 for sale
Woodturning lathes


They provide here a super functional wood lathe, the noble mark Hager, is what really high class. It is a normal used condition. There are small traces of use. This machine provides you with the finest and most accurate, ...
used machine
 
They provide here a super functional wood lathe, the noble mark Hager, is what really high class. It is a normal used condition. There are small traces of use. This machine provides you with the finest and most accurate, and praezieseste editing. As well, she's very quiet. It is very robust and super stable.

To ensure they get the pictured accessories.

Technical data:

Brand: Hager

893befbv3
Type: HD 50

Year: 1988

Top width 1500 mm

Tip height 250 mm

Motor: 1.5 KW

V: 380
1988
1,260 €  
  DE   request
109244935 209

HAGER HD 50 for sale
Woodturning lathes


They provide here a super functional wood lathe, the noble mark Hager, is what really high class. It is a normal used condition. There are small traces of use. This machine provides you with the finest and most accurat ...
used machine
 

They provide here a super functional wood lathe, the noble mark Hager, is what really high class. It is a normal used condition. There are small traces of use. This machine provides you with the finest and most accurate, and praezieseste editing. As well, she's very quiet. It is very robust and super stable.

To ensure they get the pictured accessories.

Technical data:

Brand: Hager

Type: HD 50

Year: 1982

Top width 2000 mm

Tip height 250 mm

Motor: 1.1 KW

V: 220
1982
1,344 €  
  DE   request
109244901 102

BIGLIA B 500 for sale
CNC Turning Machines


CNC lathe - inclined bed machine BIGLIA B 500 bearing no 1105-01665 make BIGLIA type B 500 built in 1996 State second-hand machine control CNC Fanuc OT storage France country of origin Italy delivery after agreement bas ...
used machine
 
CNC lathe - inclined bed machine BIGLIA B 500 bearing no 1105-01665 make BIGLIA type B 500 built in 1996
State second-hand machine control CNC Fanuc OT storage France country of origin Italy delivery after agreement based on cargo from site technical details turning diameter 500 mm turning length 500 mm control Fanuc OT rail forward: 68 mm speed range - spindle 5000 U/min feed range - revolver / stepless 1 - 12000 mm/min rapid traverse 20 / 12 m / min number of turret: 1 piece turret - places : 12 stations tool holder direct consumption total power consumption 20 kW machine weight 5 tons of space requirement approx. 4900 x 1800 x 1800 mm accessories complete machine documentation Yes Yes conveyors description immediately free good strong machine 2-axis controlled
CONTROL FANUC O T WITH SPAENEFOERDERER


1996
14,500 €  
  FR   request
109244880 102

BIGLIA B 131 S3 for sale
CNC Turning Machines


CNC lathe - inclined bed machine BIGLIA B 131 - S 3-Nr. 1105-00522 make BIGLIA type B 131 - S 3 year 1990 State second-hand machine CNC CNC Fanuc 0-T storage France country of origin Italy delivery after agreement based  ...
used machine
 
CNC lathe - inclined bed machine BIGLIA B 131 - S 3-Nr. 1105-00522 make BIGLIA type B 131 - S 3 year 1990 State second-hand machine CNC CNC Fanuc 0-T storage France country of origin Italy delivery after agreement based on cargo from site technical details turning diameter 300 mm turning length 420 mm CNC Fanuc 0-T bar passage: 52 mm speed range - spindle 4000 RPM feed range - revolver / stepless 1 - 12000 mm/min rapid traverse 20 / 12 m / min number of turret : 1 piece turret - places: 12 stations tool holder direct recording tailstock MK 5 total power 20 kW machine weight approx. 3.8 t space requirement approx. 2900 x 1800 x 1800 mm accessories 3 - bake - feed conveyors part catcher + counter spindle

Description immediately free good strong machine with counter spindle
SPAENEFOERDERER



1990
7,500 €  
  FR   request
109244860 102

MORI SEIKI SL-25B for sale
CNC Turning Machines


CNC lathe Manufacturer: Mori Seiki Type: SL 25 B Year of construction: 1995 CNC control: MSC 516 Turning diameter: 260 mm Turning length: 500 mm 10 tools Weight: approx. 5,000 kg
used machine
 
CNC lathe
Manufacturer: Mori Seiki
Type: SL 25 B
Year of construction: 1995
CNC control: MSC 516

Turning diameter: 260 mm
Turning length: 500 mm
10 tools
Weight: approx. 5,000 kg
1995
Price  
  DE   request
108973674 209

HEMPEL VKG for sale
Lathes


fully automatic lathe of scantlings Rod length: 700 mm max Turning length: 64 mm Turning diameter of Max 64 mm
used machine
 
fully automatic lathe of scantlings

Rod length: 700 mm max
Turning length: 64 mm
Turning diameter of Max 64 mm
1987
Price  
  DE   request
108524903 102

GILDEMEISTER GAC 65 for sale
CNC Turning Machines


Rods - Ã?: 65 mm Spindle bore - ø: 79 mm Speed range: 50-4500 RPM Lancing carriage I + II: -Travel plan: 70 mm -Rapid traverse rate: 8 mtr. / min. -Forward speed max: 5 mtr. / min. -Feed force ...
used machine
 
Rods - Ã?: 65 mm
Spindle bore - ø: 79 mm
Speed range: 50-4500 RPM
Lancing carriage I + II:
-Travel plan: 70 mm
-Rapid traverse rate: 8 mtr. / min.
-Forward speed max: 5 mtr. / min.
-Feed force: 600 daN
-Path resolution: 0.001 mm

Cross slide III + IV:
-Travel plan: 70 mm
-Travel length: 164 mm
-Rapid traverse rate: 8 mtr. / min.
-Feed max.: 5 mtr. / min.
-Thrust plan: 600 daN
-Longitudinal feed force: 560 daN
-Path resolution: 0.001 mm

Gun carriage:
-Travel plan: 70 mm
-Travel length: 274 mm
-Rapid traverse rate: 7.5 / 15 mtr. / min.
-Feed max.: 5 mtr. / min.
-Thrust plan: 600 daN
-Longitudinal feed force: 1120 daN
-Path resolution: 0.001 mm

Tool carrier:
-Page sledge
-the adjustable quick release system
-Quadr tool shank. 20 mm
-Tip height: 60 mm

Turret:
-Number of stations: 8
-Upper - intake to
DIN 69880 - shank - Ã?: 30 mm
-Switching time 45 °: 0.5 sec.
-Switching time 180 °: 1.0 sec.

Total power: 25 KW / 380 Volt
Machine weight: 3500 kg

Accessories / others: CNC Eltro control pilot
-CNC railway control 8 axes
-2 slides per 1 axis (X)
-3 slides per 2 axes (X, Z)
1 St. tool turret 8 - fold
some with driven tools
Hydr. Collet Chuck
Chip conveyor
Coolant system
Counter spindle
approx. 4 WKZ Halter for stinging slide
approx. 6 tool holder turret and
Sub spindle
New screen
3 mtr. IEMCA loading magazine up to 65 mm Ã?
incl. residual piece excerpt back
Machines - Fixators
Documentation

Note: The cross slide III is not functional
sound - the ball screws in the Z - axis
must be replaced spare parts costs
According to DMG MORI = 1370,00 € net + VAT

All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake.
Any interested person can visit after consulting the machine before making a purchase; a demonstration of power is possible.
Loading at cost, since a foreign truck must be hired.
1990
Price  
  DE   request
108497024 102

TAKISAWA TS-25 for sale
CNC Turning Machines


Machine in good condition without tool. Can be seen under power. Is Grundgereinigt. Machine is delivered because of restructuring.

 
Machine in good condition without tool.
Can be seen under power.
Is Grundgereinigt.

Machine is delivered because of restructuring.
 
9,750 €  
  DE   request
108496946 102

HAAS TL – 2 HE for sale
CNC Turning Machines


HAAS-CNC lathe or manual tooling lathe Type: TL - 2 HE with CPTK coolant pump Built in 2008 Turning diameter: 406 mm Turning length: 1219 mm 4 jaw Chuck Rota-C: 254 mm 3 jaw Chuck Rota-C: 254 mm Multi fix h ...
used machine
 
HAAS-CNC lathe
or manual tooling lathe
Type: TL - 2 HE
with CPTK coolant pump

Built in 2008

Turning diameter: 406 mm
Turning length: 1219 mm
4 jaw Chuck Rota-C: 254 mm
3 jaw Chuck Rota-C: 254 mm
Multi fix holder Gr.B with 4 holders
Centre point of Röhm, MK-4 recording
A2-6 spindle nose

Hours of operation: approx. 2500 machine is fully functional. Machine is in good condition.
We love to hear from you.
2008
Price  
  DE   request
108496936 102

MIYANO BND 42 S5 for sale
CNC Turning Automatics


Bar passage of to 42 mm 3m brand FMB bar feeder -the machine has 1 spindle + 1 counter spindle -1 turret with 12 shots for tool holders (supplied) -inclusive radial + axial driven tools -the control type is FANUC ...
used machine
 

Bar passage of to 42 mm
3m brand FMB bar feeder
-the machine has 1 spindle + 1 counter spindle
-1 turret with 12 shots for tool holders (supplied)
-inclusive radial + axial driven tools
-the control type is FANUC 21

the following accessories are included:
2 x Collet Chuck 173E without collets
various boring holder and recordings for tools with a
Ã? 20 x 20 mm documentation for machine and control system, if available

Max Rotary length 125 mm
Rotation speed 5000 RPM
Spindle motor power 25,7 kW

Delivery mid-October
1998
29,500 €  
  DE   request
108496923 102

STAR RNC-16A for sale
Longitudinal Turning Machines (Lathes)


MACHINE IN WORKING ORDER THAT HAS WORKED IN OIL - CUCCHI BARFEED - FANUC 0-T CONTROL - WELL TOOLED - SOME ACCESSORIES - MANUALS
used machine
 
MACHINE IN WORKING ORDER THAT HAS WORKED IN OIL - CUCCHI BARFEED - FANUC 0-T CONTROL - WELL TOOLED - SOME ACCESSORIES - MANUALS
1991
Price  
  AG   request
108485977 209

GEIGER B.3234324 for sale
Lathes


Manufacturer: Geiger Type: B. 3234324 Year of construction: 1978 Machine no.: 29146 Turning diameter: 1,450 mm Turning length: 1300 mm including face plates 600 mm / 800 mm / 1200 mm and miscellaneous accessories  ...
used machine
 
Manufacturer: Geiger
Type: B. 3234324
Year of construction: 1978
Machine no.: 29146
Turning diameter: 1,450 mm
Turning length: 1300 mm
including face plates 600 mm / 800 mm / 1200 mm
and miscellaneous accessories
1978
used machinery auction RESALE 1,700 €  
  DE   request
108327554 102

HARRISON ALPHA 460 T for sale
Cycle Lathes


CNC Fanuc Swing over bed 460 mm Top width 1500 mm Speed 2000 1/min Tailstock
used machine
 
CNC Fanuc
Swing over bed 460 mm
Top width 1500 mm
Speed 2000 1/min
Tailstock
2004
Price  
  DE   request
108319022 102

SCHAUBLIN 102-P-TR for sale
Turning Machines (Lathes) And Turning Automatics


Schaublin turret lathe 102-P-TR Type: 102N80 Equipment no.: 327755 Tip height: 102 mm Maximum centre distance: 350 mm Turning diameter over the slide: 85 mm speed: 50-5000 RPM Gun carriage with hydropneumatic c ...

 
Schaublin turret lathe 102-P-TR

Type: 102N80
Equipment no.: 327755
Tip height: 102 mm
Maximum centre distance: 350 mm
Turning diameter over the slide: 85 mm speed: 50-5000 RPM

Gun carriage with hydropneumatic control number tool settings of the turret: 6
Range of working feeds: 20-2000 mm / min.
Effective longitudinal stroke: 80 mm

Grooving apparatus with hydropneumatic control
Usable plunge stroke: 80 mm adjustment range of work feeds: 20-2500 mm / min.

Machine weight: 800 kg
Dimensions Lxwxh: 221 x 97 x 169cm

Accessories:
Various tool holder
Rods supplies facility Sameca Monosam D32
-with hydraulic pump - 3 liners
 
Price  
  CH   request
108135933 102  

WAGNER MASCHINEN S 200 for sale
CNC Turning Machines


Designation of the plant lathe manufacturer Wagner machines model S 200 year 1991 Control Sinumerik 810 compact CNC railway control system Sinumerik Sprint T hours 92.287 h Corrective measure of the tailstock 126 ...
used machine
 
Designation of the plant lathe manufacturer Wagner machines model S 200 year 1991

Control Sinumerik 810 compact CNC railway control system Sinumerik Sprint T hours 92.287 h

Corrective measure of the tailstock 1260 mm line electrified, however, there is no server, which could result in the machine.
System is no longer used since 3-4 years
Deadline now
1991
8,500 €  
  DE   request
107529993 102

SPINNER TC400-52 with Indexing Chuck for sale
CNC Turning Machines


This machine specially equpped with Automatic INDEXING CHUCK. Indexing chuck enable to make part machining 4 different position with one part clamping. Swing dia 400 mm Turning dia 280 mm Controller Fanuc 21 Can be  ...
used machine
 
This machine specially equpped with Automatic INDEXING CHUCK.
Indexing chuck enable to make part machining 4 different position with one part clamping.
Swing dia 400 mm
Turning dia 280 mm
Controller Fanuc 21
Can be tested under power
2009
Price  
  TR   request
107365601 102

WEILER CONDOR VS 1 for sale
CNC Turning Machines


Tip height 155 mm Turning length 800 mm Speed 24-2800 RPM / 18 steps of main drive 3 KW Spindle passage 38 mm ACCESSORIES: 3 - jaw Chuck ø 160 mm Faceplate Fabr. BISON Ã? 250 mm Flange  ...
used machine
 
Tip height 155 mm
Turning length 800 mm
Speed 24-2800 RPM / 18 steps of main drive 3 KW
Spindle passage 38 mm

ACCESSORIES:
3 - jaw Chuck ø 160 mm
Faceplate Fabr. BISON Ã? 250 mm
Flange with protective sheath
Multifix steel holder B
4 steel holder
1 drill steel holder
1 Chuck Mk3
1 mitlo. Lathe
7 feet

Hand clamping device
with 48 train collets / form 5 C
rising from 0.5 mm to 0.5 mm
1 tension tube for hand 1 pliers receiver MK5
with Jack screws
for spindle with bayonet mount short taper nose DIN 55022/5
1 reducing sleeve MK3
1983
Price  
  DE   request
107365599 102

WEILER PRAKTIKANT 800 R for sale
Turning Machines (Lathes)


Tip height 140 mm Turning length 800 mm Speed 42-2000 RPM - 16 levels of main drive 1.6 KW Spindle passage 36 mm Machine no. 3316 ACCESSORIES: 3 - jaw Chuck ø 160 mm Face plate ø ...
used machine
 
Tip height 140 mm
Turning length 800 mm
Speed 42-2000 RPM - 16 levels of main drive 1.6 KW
Spindle passage 36 mm
Machine no. 3316

ACCESSORIES:
3 - jaw Chuck ø 160 mm
Face plate ø 280 mm
Hand clamping device
15 collets 1-8 mm,.
0.5 mm stgd.
Change gears 20/25/80/120
Multifix 3 steel holder
Starting with bezel
Fixed bezel
Chuck MK 3
mtlfd. Lathe MK 3
1984
Price  
  DE   request
107365547 102

OKUMA LB 3000 EX MW 500 for sale
CNC Turning Machines


Okuma LB 3000 EX MW 500 big bore built in 2007 year of production: 2007 Control: OSP P 200 L spindle hours: 17100 h available from: KW 34 / 35 2017 TECHNICAL DATA: Maximum turning length: [mm] 500 Turning diamete ...
used machine
 
Okuma LB 3000 EX MW 500 big bore built in 2007 year of production: 2007
Control: OSP P 200 L spindle hours: 17100 h available from: KW 34 / 35 2017

TECHNICAL DATA:

Maximum turning length: [mm] 500
Turning diameter: [mm] 340
Spindle bore: [mm] 80
Bar passage: [mm] 70
C-axis: 0.001 °
Number of controlled axes: 5
Speed range: [1/min] 5000
Power: [kW] 30

Tool places: 12
driven tools 12
Performance angetr. Tools [kW] 7.1 speed angetr. Tools 6,000

Spindle speed range: [1/min] 6,000

Procedures:

Z-axis: [mm] 1,010
W-axis: [mm] 1.085
Rapid traverse: (x/Z) [m/min] 20 / 25

Amenities chip conveyor
Touch setter increased coolant pump 6 bar part catcher with box
hydraulic 3-jaw Chuck Kitagawa B 210 hydraulic 3-jaw Chuck Kitagawa B 208 tool package basic holder tool package powered holder axial + radial as an additional option we offer different bar loading magazines (Irco ILS RBK; Samsys multi 3000) to match the tool of weight of machine: [kg] 6,300
Space requirement (LxWxH): [m] 3.38 x 2.01 x 2,455

Calender week 33 / 2017 under current in the demonstration centre Werlte to visit the machine before a delivery is technically tested and insured transport, as well as putting the machine on request intermediate sales and error replaced defective components reserved!
2007
Price  
  DE   request
107365513 102

VICTOR VTURN 26 for sale
CNC Turning Machines


CNC lathe - inclined bed machine VICTOR VT 26 Nr. 1105-00757 make VICTOR type VT 26 year 1995 State second-hand machine CNC CNC Fanuc OM storage France country of origin Taiwan delivery immediately cargo base in stock mo ...
used machine
 
CNC lathe - inclined bed machine VICTOR VT 26 Nr. 1105-00757 make VICTOR type VT 26 year 1995 State second-hand machine CNC CNC Fanuc OM storage France country of origin Taiwan delivery immediately cargo base in stock more info on request technical details turning diameter 520 mm turning length 650 mm CNC Fanuc OM tip height 160 mm centre distance 550 mm travel plan. (X-axis) 190 + 50 mm longitudinal stroke 610 mm

Description CNC CNC Fanuc 0 T, 12 station tool turret
3 JAW CHUCK
TAILSTOCK
SPAENEFOERDERER
1995
15,500 €  
  FR   request
107365489 102

GILDEMEISTER NEF CT 40 for sale
CNC Turning Automatics


in working condition

 
in working condition
 
Price  
  PL   request
107284408 102

STANITALIA RT117/8 for sale
Turning Machines (Lathes)


Maximum turning diameter: 1200 mm Max Drehlange: 8000 mm Spindeldurchgng: DIA 100 mm
used machine
 
Maximum turning diameter: 1200 mm
Max Drehlange: 8000 mm
Spindeldurchgng: DIA 100 mm
1996
Price  
  PL   request
107219671 102

BOEHRINGER VDF 32 M for sale
CNC Turning Machines


Lathe BOEHRINGER VDF 32 M-Nr. 1105-02275 make BOEHRINGER VDF type 32 M year 1993 State second-hand machine control CNC SIEMENS 880 T storage HAGUENAU country of origin Germany delivery immediately cargo base stock HAGUE ...
used machine
 
Lathe BOEHRINGER VDF 32 M-Nr. 1105-02275 make BOEHRINGER VDF type 32 M year 1993 State second-hand machine control CNC SIEMENS 880 T storage HAGUENAU country of origin Germany delivery immediately cargo base stock HAGUENAU FRANCE details swing 700 mm turning length 1150 mm control SIEMENS 880 T turning diameter over bed slide 440 kW spindle drive motor 60 power Chuck diameter 400 mm spindle speeds 25-4000 RPM spindle torque 1780 nm number of tools in turret 1 12 number of tools in turret 2 12
Tool bore 50 mm tool weight of 20 kg tailstock Quill stroke 100 mm feed 1-10000 mm / min spindle bore 103 mm overall power demand 78 kW machine weight approx. 14 t space approx. 6,0 x 2.5 x 2.5 m description - CNC control SIEMENS 880 T for 4 axes
-2 turret with internal Coolant
-340 mm power operated chucks
-Conveyors
-various shots and JAWS
1993
27,500 €  
  FR   request
107183280 102

VDF BOEHRINGER PL 1000 for sale
Facing Lathes With Tailstock


Turning diameter over bed: 1200 mm. Turning diameter over plan support: 800 mm. Centre distance (turning length): 1250 mm. Spindle speed: 1.1. 150 rpm. Incl. 4 jaw chucks: 1000 mm,. Tailstock and Toolpost.  ...
used machine
 
Turning diameter over bed: 1200 mm.
Turning diameter over plan support: 800 mm.
Centre distance (turning length): 1250 mm.
Spindle speed: 1.1. 150 rpm.
Incl. 4 jaw chucks: 1000 mm,.
Tailstock and Toolpost. Antriebsleisteung: 15 kW.
Weight: approx. 5000 kg.
The machine may be viewed under power and presented.
Attractive ready state.
1965
Price  
  DE   request
107183276 102

VDF V 3 / 3200 for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


Turning diameter over bed: 580 mm. Centre distance (turning length): 3200 mm. Spindle speed: 19-960 RPM. Incl. 4 and tailstock, steel holder compartment. Weight: approx. 5500 kg. The machine may be viewed under powe ...
used machine
 
Turning diameter over bed: 580 mm.
Centre distance (turning length): 3200 mm.
Spindle speed: 19-960 RPM.
Incl. 4 and tailstock, steel holder compartment.
Weight: approx. 5500 kg.
The machine may be viewed under power and presented.
Good ready condition.
1959
Price  
  DE   request
107183095 102

SEDIN 1516 for sale
Carousel Turning Machines (Lathes)


Producer: SEDIN - Macioo model: 1516 ROK prod.: 1976 Parametry contour: Å?rednica toczenia: 1 600 mm, Å?rednica stoÅ?u: 1 400 mm, Max wysokoÅ?Ä? obrabianego detalu: 1 000 mm, Max waga ...
used machine
 
Producer: SEDIN - Macioo model: 1516
ROK prod.: 1976

Parametry contour:
Å?rednica toczenia: 1 600 mm,
Å?rednica stoÅ?u: 1 400 mm,
Max wysokoÅ?Ä? obrabianego detalu: 1 000 mm,
Max waga obrabianego detalu: 5 000 kg.
Max wzdÅ?uzny posuw wrzeciennika: 630 mm,.
Max posuw suportu: 975 mm.
Max pionowy posuw wrzeciennika: 700 mm.
Max pionowy posuw suportu: 1 000 mm,
Zakres prÄ?dkoÅ?Ä?i: 16.
Posuwy szyblie suportu: 0.07-12.5 mm / obr,.
OdlegÅ?oÅ?Ä? pomiÄ?dzy stoÅ?em a wrzeciennikiem: 0-1-225 mm,.
MOC silnika gÅ?ównego: 30 kW,.
Zakres predkoÅ?ci: 4-200 obr / min.
Maszyny Wymiary: 3 190 x 3 360 x 4 100 mm,.
Maszyny Waga: 18 000 kg.
1976
Price  
  PL   request
107096694 102

WEILER Condor B for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


L + Z LATHE WEILER CONDOR B TOP - STATE - 04-03-196 Shipping time: On request Number: 04-03-196 Manufacturer: Weiler Type: Condor B MACHINE DATA Year of construction: approx. 1991 L x W x h: approx. 2000 ...
used machine
 
L + Z LATHE WEILER CONDOR B TOP - STATE - 04-03-196

Shipping time: On request

Number: 04-03-196

Manufacturer: Weiler
Type: Condor B

MACHINE DATA
Year of construction: approx. 1991
L x W x h: approx. 2000 x 1000 x 1700 mm
Weight: 800 kg

Very good condition - excellent condition
Guided tours of the machine almost as good as new.

TECHNICAL DATA
Digital display: 3 - axes - digital display new

Dimensions:
Maximum turning diameter over bed: dia. 340 mm
Maximum turning diameter over support: approx. Ã? 185 mm
Maximum turning length: 800 mm
Bar passage: approx. Ã? 42 mm

Spindle:
Speed range: approx. 22-2800 RPM
Spindle nose: A 2 - 5
Power: approx. 3,5 kW

Automatic slitting & plan feeds:
Feed range: approx. 0.016 - 0.80 mm / Rev

Suitable for threads:
-metric 0.20-28 mm
"-80-1 1/2 inch Gg /"
-Diametral - Pitch threaded 160-2 3/4 DP
-Module 0.1-9

Tailstock: MK 3

ACCESSORIES
• 3 - bake - chuck Ã? 160 mm Röhm
• Quick - clamping Collet fixture 386E
• Various collets 386E
• Quick change Toolpost + 3 inserts
• Chuck guard
• Work light
• Coolant system
• Complete machine documentation
• Emergency
• Drill Chuck for tailstock
• Revolving head for tailstock
• Various wrenches
• Feet
• Flange
• Protection ring - spindle nose
• Various JAWS
• Grease
• Cone & tip for main spindle
• Various turning tools
• Bed fence
• Central lubrication system for bed sled
• Chip guard - rear

Other accessories on request
Price and other specifications on request
1991
Price  
  DE   request
107096583 102

WEISSER-HEILBRONN Hektor for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


Turning length 1000 mm Peak height of the flat car 295 mm Drehdurchm. bed 600 mm Umlaufdurchm. about the offset 800 mm Spindle bore 62 mm Speed 18-900 RPM. Centre point in spindle MK 5 Pinolendurchm. 80 mm Weight ...
used machine
 
Turning length 1000 mm
Peak height of the flat car 295 mm
Drehdurchm. bed 600 mm
Umlaufdurchm. about the offset 800 mm
Spindle bore 62 mm
Speed 18-900 RPM.
Centre point in spindle MK 5
Pinolendurchm. 80 mm
Weight approx. 2,5 t
Tool holder, 3-jaw Chuck Forkardt diameter. 250 mm, 1 fixed bezel.
1961
Price  
  DE   request
107096538 102

GDW GDW 520CS for sale
CNC Turning Machines


GDW 520 CS Cycle lathe Tip height 570 mm centre distance 1000 / 1500 mm power 15 kW speed range 10-2500 RPM control Siemens
used machine
 

GDW 520 CS
Cycle lathe
Tip height 570 mm centre distance 1000 / 1500 mm power 15 kW speed range 10-2500 RPM control Siemens
2011
Price  
  DE   request
107096524 102

WEILER UD 24 CNC for sale
CNC Turning Machines


Turning length 270 mm Rotation Ã? beds to 190 mm Rotary diameter over slide, maximum 80 mm Spindle speeds from 50 to 5000 RPM Spindle bore ø 36 mm CNC control SIEMENS type 820 T Total power-on  ...
used machine
 
Turning length 270 mm
Rotation Ã? beds to 190 mm
Rotary diameter over slide, maximum 80 mm
Spindle speeds from 50 to 5000 RPM
Spindle bore ø 36 mm
CNC control SIEMENS type 820 T
Total power-on hours 410 h
Spindle run time 171 h
Total machine weight 1600 kg
Machine dimensions length x width x height 1.83 x 1.66 x 1.63 m
Total power 15 kW
Turret 8 x
electronic Handwheel
Workpiece a measuring device
various holder
Condition very good
running in a school for demo purposes only.
free truck under power, can be tested
1990
Price  
  DE   request
107096514 102

WAGNER WDE 360 for sale
CNC Cycle Turning Machines


Cycles of CNC lathe Manufacturer: Wagner Type: WDE 360 Year of constr.: 2015 CNC control: Siemens 828 B-T Maximum circulation Ã? bed: 360 mm Max rotation Ã? ü. Cross slide: 180 mm Top width: 1000  ...
used machine
 
Cycles of CNC lathe
Manufacturer: Wagner
Type: WDE 360
Year of constr.: 2015
CNC control: Siemens 828 B-T

Maximum circulation Ã? bed: 360 mm
Max rotation Ã? ü. Cross slide: 180 mm
Top width: 1000 mm
Spindle nose DIN 55026 cc5
Spindle bore: 40 mm
Spindle speed range: 20-3000 rpm
Manual traverse of tailstock
Tailstock Quill taper: MK 4
Quill diameter: 60 mm
Quill travel: 130 mm
Spindle motor: 5,5 KW
Z axis travel: 800 mm
Traverse path X-axis: 250 mm
Dimensions (L x W x H): 2700 x 1490 x 2120 mm
Weight: 1.700 kg

Accessories:
8 x Sauter disc turret
hydraulic Chuck D = 200 mm
advanced technology features Sinumerik 828D
2015
Price  
  DE   request
106827638 102

STROHM M 155 K for sale
Longitudinal Turning Machines (Lathes)


Automatic lathe Santos M 155 K Built in 1991 Largest material flow: 15 mm Turning length: 100 mm Speed range: up to 10,000 Bar feeder IENCA type CS 116/31/CTH (engine No. 91060812) Machine is fully functional. ...

 
Automatic lathe
Santos M 155 K
Built in 1991
Largest material flow: 15 mm
Turning length: 100 mm
Speed range: up to 10,000

Bar feeder IENCA type CS 116/31/CTH (engine No. 91060812)

Machine is fully functional. Machine is in good condition.
We love to hear from you.

 
2,500 €  
  DE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Get the latest machine offers by email: order newsletter