british flag
Resale Logo

Side used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used IT-hardware equipment  Hascon  http://www.hascon.con 
banner logo
start page > keywords Side > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125465304 2419

SPEZIALKRAFTWAGEN N1) VW Hochraum-Kasten Allrad for sale


last off Code: BH-70507 First registration: 01.04.1992 elapsed. Mileage: 115.698 km Output: 51 kW Displacement: 1,588 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, ...

 
last off Code: BH-70507
First registration: 01.04.1992
elapsed. Mileage: 115.698 km
Output: 51 kW
Displacement: 1,588 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: 251/4WD bra
FIN: WV2ZZZ25ZLG114490
Equity / total weight: 2,060/2,600 kg
Color: Green
Construction: closed
Number of seats: 3 (front)
Facilities: 4-speed manual transmission, manual window regulator front, all-wheel drive
Documentation: types of licence available
Key: 1
Comments to the State: clutch faulty, glow candles defective (stabilizer rubber cracked), drive shaft sleeves front left and right torn, brake discs front brake line run, behind rusty, slightly dented side door, sliding door and right,. Front slightly dented bumper, dented corner rear left, side panel rear left scratched, dent on passenger door and gutter, entry front left rusted through, fender of rear left rusted through, div. differences in colour paint, dents and abrasions all-round vehicle.
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-300-0132 und2320-0-550-0083
 
Price  
    request
125462883 2435

HAULOTTE STAR 10 Electric, Jib, 10m Working Height, Non mar for sale
Flatbed/Dropside trailers


; Gross weight [kg]: 2760; Rear tyres remaining: 70; Front tyres remaining: 70; Maximum lift capacity [kg]: 230
used machine
 
; Gross weight [kg]: 2760; Rear tyres remaining: 70; Front tyres remaining: 70; Maximum lift capacity [kg]: 230
2012
13,900 €  
  NL   request
125465301 203

WEINIG U17A for sale
Four-sided planing machines


MULTISPINDLE MACHINE Type WEINIG U17A indipendent motors for each planing spindle composed by 6 Spindles : 1) Surface planer 2) Moulder ( right ) 3) Moulder ( left ) 4) Moulder ( right ) 5) Thickness Planer 6) Un ...

 
MULTISPINDLE MACHINE Type WEINIG U17A
indipendent motors for each planing spindle
composed by 6 Spindles :
1) Surface planer
2) Moulder ( right )
3) Moulder ( left )
4) Moulder ( right )
5) Thickness Planer
6) Universal shaft 360°
- max. working width mm. 170
- max. working heigth mm. 120
- length of entry table mm. 1800
- Lift of infeed unit motor Hp 0,5
- Feed speed from 6 to 22 mt./min
- Spindle rotations of working heads rpm. 6000
- Spindle diameter of working heads mm. 40
- Infeed unit with pneumatic pressure
- Table lubrification
- Volt. 380/50
 
Price  
  IT   request
125463419 2460

HAULOTTE STAR 10 Electric, Jib, 10m Working Height, Non mar for sale
Flatbed/Dropside semi-trailers


; Gross weight [kg]: 2760; Rear tyres remaining: 50; Front tyres remaining: 50; Maximum lift capacity [kg]: 230
used machine
 
; Gross weight [kg]: 2760; Rear tyres remaining: 50; Front tyres remaining: 50; Maximum lift capacity [kg]: 230
2008
10,900 €  
  NL   request
125452391 107

GRANDINI LTCM 15 for sale
SLITTING- AND CUT TO LENGTH LINE 1.500 x 2/2,5 mm


Band width max. / strip width Max: 1.500 mm belt thickness Alumax. / strip thickness alu maximum: 2.5 mm Band thickness steel Max / strip thickness 2.0 mm steel(42kg/CM2): Line speed/line speed 20 m / min Coil weight/ ...
used machine
 
Band width max. / strip width Max: 1.500 mm belt thickness Alumax. / strip thickness alu maximum: 2.5 mm
Band thickness steel Max / strip thickness 2.0 mm steel(42kg/CM2):
Line speed/line speed 20 m / min
Coil weight/coil weight: 5to.
Coil inside diameter/coil inner dia.: 460-508 mm
Coil-AuÃ?endruchmesser/coil outer dia: 1,600 mm
Stacking device/stacking unit: 1,500 x 6,000 mm
Package height approx. / pack geigh about: 400 mm / 5 tons.
Overall performance Motors / motor total power: 14 kW, 380 V, 50 Hz.
Air pressure air pressure: 6 bar
Space required/space requirements: 17 x 5 m

Material: Aluminum, steel, galvanized, painted band, others / aliminium, steel galvanized, perpainted, others
2002
Price  
    request
125463421 2460

HAULOTTE STAR 10 Electric, 10m Working Height, Only 200 Hou for sale
Flatbed/Dropside semi-trailers


; Gross weight [kg]: 2575; Rear tyres remaining: 60; Front tyres remaining: 60; Accessories: Manufacturer: Haulotte, Typ: Star 10, Building year: 2011, Fuel: Electric, Serial number: ME108772, Working hours: 214 h, Worki ...
used machine
 
; Gross weight [kg]: 2575; Rear tyres remaining: 60; Front tyres remaining: 60; Accessories: Manufacturer: Haulotte, Typ: Star 10, Building year: 2011, Fuel: Electric, Serial number: ME108772, Working hours: 214 h, Working height: 10 m, Platform Capacity: 230 kg., Drive speed - stowed: 5 km/h, Drive speed - raised: 0.6 km/h, Drive height: 8 m, Nu; Maximum lift capacity [kg]: 230
2011
12,900 €  
  NL   request
125452375 107

CAMU for sale
Cutting-To-Length Lines


Band width max. / strip width max.: 1,650 mm Band thickness steel/strip thickness steel: 0.4-2.0 mm Band thickness ALU/strip thickness steel aluminium: 0.4-3, 0 mm Coil weight Max/coil max weight: 20,000 kg Coil insi ...
used machine
 
Band width max. / strip width max.: 1,650 mm
Band thickness steel/strip thickness steel: 0.4-2.0 mm
Band thickness ALU/strip thickness steel aluminium: 0.4-3, 0 mm
Coil weight Max/coil max weight: 20,000 kg
Coil inside diameter/coil inner dia.: 508/610 mm
Coil outer diameter Max/coil out slide. Max: 1800 mm
Setting rollers number/no. of straightening rolls: 17 St. / no.
Version: 4 high
Dimensions/dimension: 30x6m

The system has worked with aluminum / line what working with aluminum.
2002
Price  
    request
125463423 2460

HAULOTTE HA32PX Diesel, 4x4x4 Drive, 32 m Working Height, R for sale
Flatbed/Dropside semi-trailers


; Gross weight [kg]: 21100; Rear tyres remaining: 50; Front tyres remaining: 50; Maximum lift capacity [kg]: 250
used machine
 
; Gross weight [kg]: 21100; Rear tyres remaining: 50; Front tyres remaining: 50; Maximum lift capacity [kg]: 250
2007
49,500 €  
  NL   request
125452226 1707  

HP, FS,SUN, DIV Diverse for sale
Server, Workstation, Suns, Igel 5/2 oder 5/4,


All devices without hard drives, outside any warranty 16 x Sun Netra 20 3 x Sunblade 100 5 x Sunblade 150 4 x various servers 1 x HP ProLiant DL360g6 5 x Fujitsu Siemens PRIMERGY 27 x Sunfire 220 100 x Hedgeh ...
used machine
 
All devices without hard drives, outside any warranty

16 x Sun Netra 20
3 x Sunblade 100
5 x Sunblade 150
4 x various servers
1 x HP ProLiant DL360g6
5 x Fujitsu Siemens PRIMERGY
27 x Sunfire 220

100 x Hedgehog workstation 5/2 incl. power supply
31 x Hedgehog workstation 5/4 incl. power supply
10 x various servers

3 x HP Server
3 x RAID systems from Fujitsu Siemens
Miscellaneous installation materials
 
3,100 €  
    request
125460784 107

OBRU SAH/5M for sale
Decoilers for Coils


sheet width - max.: 0550 - 710 mmcoil weight: 1,50 tcoil internal dia.: 350 - 450 mmcoil outside - diam. ca.: 1700 mmback length without arms: 710 mmexpansion: manuell total power requirement: 1,50 kWweight of the machin ...

 
sheet width - max.: 0550 - 710 mm
coil weight: 1,50 t
coil internal dia.: 350 - 450 mm
coil outside - diam. ca.: 1700 mm
back length without arms: 710 mm
expansion: manuell
total power requirement: 1,50 kW
weight of the machine ca.: 0,70 t
dimensions of the machine ca.: 1,60 x 0,80 x 1,20 m
- sheet width without arms 710 mm
- sheet width with 1 arm max. 625 mm
- Brake motor with LENZE variable speed gearbox
- Speed control infinitely variable via handwheel 7 - 37 rpm.
- Height of mandrel over corridor 920
- Drive motor is equipped with a connection cable
(Control is missing)
- with 6 pieces waistband arms
- Right-hand rotation



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125451820 102

POLYGIM DIAMOND 32 CSB SWISS TYPE for sale
CNC Long Turning Automatics


Swiss type lathe POLYGIM DIAMOND 32 CSB SWISS TYPE was built in 2008. Technical data for CNC lathes POLYGIM DIAMOND 32 CSB SWISS TYPE: CNC control: MITSUBISHI Working range: - maximum turning diameter: 33 mm - ...
used machine
 
Swiss type lathe POLYGIM DIAMOND 32 CSB SWISS TYPE was built in 2008.

Technical data for CNC lathes POLYGIM DIAMOND 32 CSB SWISS TYPE:

CNC control: MITSUBISHI

Working range:
- maximum turning diameter: 33 mm
- maximum turning length: 250 mm
- maximum drilling diameter: fi 15 mm
- maximum threading diameter: M10

Processing of external diameters:
- number of tools: 5 items
- cap dimension: 16 x 16 x 120 mm

Processing of internal diameters:
- number of tools: 4 pcs
- bushing dimension: 13 mm (ER20)

Transverse driven tools:
- number of tools: 3 pcs
- bushing dimension: 13 mm (ER20)
- rotational speed: 200-6000 revolutions per minute.

Tools from the back to the inside diameter:
- number of tools: 4 pcs
- bushing dimension: 13 mm (ER20)

Tool driven to face:
- number of tools: 3 front, 3 rear
- sleeve size: 10 mm (ER16)
- rotational speed: 3000 rpm.

Main spindle:
- spindle bore diameter: fi 36 mm
- spindle speed: 200-8000 rpm.

Counter spindle:
- diameter of the revision spindle bore: fi 36 mm
- reel spindle speed: 6000 rpm.
- maximum spindle travel: 220 mm
- quick feeds X, Y, Z: 18 m / min.

Engines:
- main spindle motor: 5.5 kW
- re-spindle motor: 1.5 kW
- drive motors X / Y / Z axis: 0.5 kW
- coolant pump motor: 0.55 kW
- lubrication: 4 W
- power supply: 8.67 kW
- spindle axis height: 960 mm

Machine dimensions:
- dimensions: 2550 x 1140 x 1568 mm
- weight: 2788 kg

Compressed air supply:
- expenditure: 10 l / min.
- pressure: 5 kg / cm

Equipment:
- intercepting spindle
- workspace lighting
- cooling system
- counter-spindle orientation every 5 degrees
- detail cut-off sensor
- part receiver
- guide ring for the fixed and rotating rod
- 5 pieces for turning the outer surface
- 4 pieces of stationary holders for turning the inside surface
- 4 positions for stationary tools for turning the inner surface from the back
- 6 positions for tools driven for lateral work
- 3 positions for power tools for work from the front
- 3 positions for work tools from the rear
- automatic bar feeder: Fedek SUNNY 542 (3.2 m)
- chip conveyor
2008
43,750 €  
  PL   request
125460774 210

WEINIG Unicontrol 6 CNC Spindeln for sale
Window production centre


Tenoning spindle: 1 St.Number of milling agregates: 5 St.Spindle diameter: 50 mmweight: 4300 kgWeinig Unicontrol 6 with CNC-spindle with full options/features!Cut-off saw-----------------motor: 3 KWspindle diameter 40 mm ...

 
Tenoning spindle: 1 St.
Number of milling agregates: 5 St.
Spindle diameter: 50 mm
weight: 4300 kg
Weinig Unicontrol 6 with CNC-spindle with full options/features!

Cut-off saw
-----------------
motor: 3 KW
spindle diameter 40 mm
spindle turnings: 2.800 Upm
tool diameter max.: 400 mm
horizontal adjsutment variable by control

length stop CNC controlled 3500 mm
------------------------------------------------------------

Tenoning spindle
---------------------------------
motor: 11 KW
spindle diameter 50 mm
spindle turnings: 3.500 Upm
tool diameter max.: 320 mm
Usable length of spindle 320 mm
Adjjustment by CNC-axis axial variable max. 240 mm for IV 68-92
adjustment speed approx. 50 mm/sek.
Number of tool postion variable because of CNC axis

1. profiling spindle (turning direction in both directions)
--------------------
Clockwise running for rip-off free stormproofing
Switsch for turning in normal direction for normal milling
motor: 11 KW
spindle diameter 50 mm
spindle turnings: 6.000 Upm
tool diameter max.: 232 mm
tool zero cycle 112 to 140 mm
Usable length of spindle 120 mm
Number of tool positions

2. Profilspindel
--------------------
motor: 11 KW
spindle diameter 50 mm
spindle turnings: 6.000 Upm
Max. tool diameter with zero cycle 112 mm: 210 mm
Max. tool diameter with zero cycle 140 mm: 232 mm
usable spindle length: 320 mm
Adjjustment by CNC-axis axial variable max. 240 mm for IV 68-92
adjustment speed approx. 50 mm/sek.
Number of tool postion variable because of CNC axis

3. spindle: grooving aggregate from top, horizonal and vertical clocked
------------------------------------------------------------------
motor: 3 KW
spindle diameter 40 mm
spindle turnings: 5850 Upm
adjustment way axial: 30 mm
adjustment way radial: 125 mm

Radial clocked on 8 positions by pneumatc revolver
Axial clocked on 8 positions by pneumatc revolver

4. profiling spindle
--------------------
profiling spindle vertical right
motor: 3 KW
spindle diameter 40 mm
spindle turnings: 5850 Upm
tool diameter : 210 mm
usable length 160 mm, 3 tools
adjustment way radial: 100 mm
adjustment way axial: 115 mm

Radial clocked on 8 positions by pneumatc revolver
Axial clocked on 8 positions by pneumatc revolver

5. spindle: groowing aggregate from bottom side
--------------------

Radial clocked on 8 positions by pneumatc revolver
Axial clocked on 8 positions by pneumatc revolver

More features:

- equipment for stormproofing of presses sashes
- Automatic turnng of the work pieces with lammella conveyour
- PC-control / NEXUS:
- laser lighter for cut-off saw
- studio window equipment (not straight windows)
- double piece package
- bars support in profiling unit
- carriage for profiling small sashes smaller 500 mm

Option:
LEITZ IV 78/90 Holz und Holz-Alu

(techncial details according to manufacturer - without guarantee!)



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125447287 1403

STAFFELSTEIN TANK water cistern liquid feed tank for sale
GP115 polyester tank 40,000 L GRP-tank water tank


GP115 - used approx. 40 m³ / 40,000 litres polyester tank / GRP-tank, Staffelstein tank, aboveground, lying on two steel pedestals, good condition. capacity: approx. 40 m / 40,000 litres material: polyester / fibe ...

 
GP115 - used approx. 40 m³ / 40,000 litres polyester tank / GRP-tank, Staffelstein tank, aboveground, lying on two steel pedestals, good condition.

capacity: approx. 40 m / 40,000 litres
material: polyester / fiberglass
length: approx. 6.50 m
diameter: Ø approx. 3.00 m
height including base: approx. 3.50 m

Manufacturer Staffelstein, horizontal, round storage tank on two steel pedestals, access on the front side, multiple connections, in- and outlets as shown in the pictures.

The container can be used as a storage tank for many different media such as water, liquid feed et cetera, or as a rain collection tank.

Price upon request.

Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us.

More information and offers on our site:
profi-tanks(dot)de
 
Price  
    request
125460776 210

WEINIG Unicontrol 12 CNC - Video - for sale
Window production centre


Tenoning spindle: 2 St.Number of milling agregates: 10 St.Spindle diameter: 50 mm! MACHINE CAN BE INSPECTED DURING PRODUCTION Machine for sale in customer orders !# 6192 Weinig Unicontrol 12 CNC, with 2 tenoning spindle ...

 
Tenoning spindle: 2 St.
Number of milling agregates: 10 St.
Spindle diameter: 50 mm
! MACHINE CAN BE INSPECTED DURING PRODUCTION !

! Machine for sale in customer orders !

# 6192 Weinig Unicontrol 12 CNC, with 2 tenoning spindles and Vario table
..

Specifications Summary
(Possibly more included equpment please inquire)
..


Cut-off saw
..
cut-off saw electronically, horizontally adjustable: NC axis
Number of tools: 1 pcs.
Spindle speed: 3000-6000 r / min
Spindle diameter: 40 mm
Tool clamping length: 13 mm
Tool diameter max .: 400 mm
Motor power: 3 kW
Alignment laser for detecting the cut
Displacement axial: NC-axis integrated into control
Displacement axial: 150 mm

Aggregate for edge rounding of the bottom
..
Axial adjustment along with Ablängsäge
Spindle speed: 9000 U / min
Spindle diameter: 20 mm
Tool clamping length: 25 mm
Tool diameter max .: 130 mm
Motor power: 3 kW

Length stop CNC controlled
..
Length 3500 mm
Incl. Positioned cut-off saw integrated into control

1st tenoning spindle
..
Number of tools: variable, CNC-axis
Spindle length: 640 mm
Spindle stroke vertical: variable, CNC-axis
Spindle speed: 2800 U / min
Spindle diameter: 50 mm
Tool diameter max .: 380 mm
Engine power: 15 kW
With hydraulic tensioned outboard bearing
Complete counterprofile: Complete spindle length is countered


2. tenoning spindle
..
Number of tools: variable, CNC-axis
Spindle length: 640 mm
Spindle stroke vertical: variable, CNC-axis
Spindle speed: 2800 U / min
Spindle diameter: 50 mm
Tool diameter max .: 380 mm
Engine power: 15 kW
With hydraulic tensioned outboard bearing
Complete counterprofile: Complete spindle length is countered


Vario table with horizontal NC-axis


1. profiling spindle
..
Position: Right
Number of tools: variable, CNC-axis
Spindle length: 400 mm with counter bearing
Spindle stroke vertical: variable, CNC-axis
Spindle horizontal: variable, CNC-axis
Spindle speed: 7000 U / min
Spindle diameter: 50 mm
Tooling circle max .: 232 mm
Engine power: 11 kW
Radial adjustment: CNC axis
Axial adjustment: CNC axis

2. profiling spindle
..
Position: Right
Number of tools: variable, CNC-axis
Spindle length: 400 mm with counter bearing
Spindle stroke vertical: variable, CNC-axis
Spindle horizontal: variable, CNC-axis
Spindle speed: 7000 U / min
Spindle diameter: 50 mm
Tooling circle max .: 232 mm
Engine power: 11 kW
Radial adjustment: CNC axis
Axial adjustment: CNC axis

Grooving aggregate from above - before the final profile spindle
..
Position: horizontal top
Spindle speed: 9000 U / min
Spindle diameter: 40 mm
Spindle length: 40 mm
Engine power: 3.7 kW
Displacement axial: 30mm
Displacement radial: 125 mm
Radial clock to 8 positions by pneumatic gun
Axial adjustment with NC-axis


3. profiling spindle
..
Position: Right
Number of tools: variable, CNC-axis
Spindle length: 400 mm with counter bearing
Spindle stroke vertical: variable, CNC-axis
Spindle horizontal: variable, CNC-axis
Spindle speed: 6000 U / min
Spindle diameter: 50 mm
Tooling circle max .: 232 mm
Engine power: 11 kW
Radial adjustment: CNC axis
Axial adjustment: CNC axis


Profiling spindle - fitting spindle - at the machine end
..
Position: vertical right up
Spindle length: 160 mm
Spindle speed: 5850 U / min
Spindle diameter: 40 mm
Tooling circle max .: 210 mm
Engine power: 3.7 kW
Displacement axial: 115 mm
Displacement radial: 100 mm
Radial adjustment: CNC axis
Axial adjustment: CNC axis

grooving aggregate from top - in addition stand
..
Position: vertical right
Spindle length: 40 mm
Spindle speed: 5850 U / min
Spindle diameter: 40 mm
Tooling circle max .: 180 mm
Motor power: 3 kW
Displacement axial: 100 mm
Displacement radial: 80 mm
Radial clocked to 8 positions by pneumatic gun
Axial clocked to 8 positions by pneumatic gun

Grooving aggregate from bottom side - in addition stand
..
Position: horizontal bottom
Spindle length: 125 mm
Spindle speed: 5850 U / min
Spindle diameter: 40 mm
Tooling circle max .: 200 mm
Motor power: 3 kW
Displacement axial: 100 mm
Displacement radial: 100 mm
Radial adjustment infinitely variable NC axis
Axial clocked to 8 positions by pneumatic gun


Other features
..

Online-capable
equipment for stormproofing of already pressed sashes.
That means on the machine you can do the outside profiles on single pieces or
in pressed condition
Double piece package
Return conveyor for 1-man operation: turning system with collet
Studio window equipment
Electronic angle display for angular windows
Control: PC-Nexus
NC-axis for feed height adjustment
2 axially clocked feed rollers opposite profile spindle for manufacturing
narrow and short parts
Rung leadership and shoot Supports bar
pressure lineal from side is divided in sections
Automatic central lubrication
Vario table with horizontal NC-axis


Option:
used Oertli tools in different systems for single part production (that means
customer did the outide profile of the sahes on the single piece)


techn. details according to manufacturer - without guarantee!



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125436764 108

ECKERT JANTAR 2 for sale
Plasma cutter


Plasma cutter ECKERT JANTAR 2 was built in 2008. Basic technical data of ECKERT JANTAR 2: - cutting width at 2 burner supports: 2000 mm - working length: 6000 mm - length of the road: 5000 mm - crossing speed: 0-2 ...
used machine
 
Plasma cutter ECKERT JANTAR 2 was built in 2008.

Basic technical data of ECKERT JANTAR 2:
- cutting width at 2 burner supports: 2000 mm
- working length: 6000 mm
- length of the road: 5000 mm
- crossing speed: 0-20000 mm / min.
- cutting thickness (with one HARRIS burner): 100 mm
- type of combustible gas: propane, acetylene, APACHI, natural gas
- programming format: ESSI
- positioning accuracy of the controller: 0.05 mm
- supply voltage: 50 Hz / 230V / + - 5%

The basic equipment of the JANTAR-2 burner consists of:
- ECS 859 CNC computer control system: 1 item
- cutting nozzles for the HARRIS burner: 3 pcs. / burner
- central gas distributor: 1 item
- a portal beam with guides for gas hoses and electric wires placed on it: 1 set.
- longitudinal roadway made of railway rails (2000 mm working cut): 1 set.
- longitudinal driving unit (two-sided): 1 set
- transverse drive unit: 1 set
2008
20,000 €  
  PL   request
125460780 206

S+S Super for sale
Frame press


Working width: 4500 mmWorking height: 2500 mmNumber of cylinders: 6 St.Dimensions (L/W/H): 6.400 x 1.850 x 3.650 mmWeight: 3.500 kgElectrohydraulic frame presser S + S Superwith automatic adjustmentCE versionFrame press  ...

 
Working width: 4500 mm
Working height: 2500 mm
Number of cylinders: 6 St.
Dimensions (L/W/H): 6.400 x 1.850 x 3.650 mm
Weight: 3.500 kg
Electrohydraulic frame presser S + S Super
with automatic adjustment

CE version

Frame press machine with 2 pieces movable presses, complete with 8 pieces
Holding cylinder for fixing frame parts, as well as with motor protection and
Control circuit breaker.

Size adjustment by optical length detection for height and width.

Working length x width: 4500 x 2500 mm

Rotating beam light curtain OTD 3

Medium pressure bar with automatic adjustment in height
up to 2500 mm high

Single pressure control for medium pressure bars

Cross-pressure device for pressing cross-bar window

Single pressure control for cross-pressure device

A triangle studio window crimping apparatus comprising:

Locking device of the vertical pressure beam
-3 push-on side-mounted pendulum pressure plates and regulators,
Central drive with single, pneumatic decoupling of the
Vertical pressure cylinder
(thereby independent of each other is the setting in any
Working height)


electrical hand control

Double pendulum plate

2 pendulum printing plates with extension (for triangular window triangle)


(Techn. Description according to manufacturer - without guarantee!)



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125436754 202

GRIGGIO T200 for sale
Bottom-spindle copy moulders


Spindle moulder GRIGGIO model T200 with: -side tenoning carriage -extended plane in entrance -adjustable casing, with Aigner fences -feeder at 4 wheels -top suspended electric box
used machine
 
Spindle moulder GRIGGIO model T200 with:
-side tenoning carriage
-extended plane in entrance
-adjustable casing, with Aigner fences
-feeder at 4 wheels
-top suspended electric box
1990
Price  
  IT   request
125460742 207

Double End Tenoner


Weight approx.: 30000 kgDimensions (l x w x h) approx.: 19000 x 3000 x 4000 mmDescription: Working width max. approx 4000 mm, equipped with Doppelzezrspanner and milling / slot spindle per side, control cabinet, converte ...

 
Weight approx.: 30000 kg
Dimensions (l x w x h) approx.: 19000 x 3000 x 4000 mm
Description: Working width max. approx 4000 mm, equipped with Doppelzezrspanner and milling / slot spindle per side, control cabinet, converter
 
used machinery auction RESALE 250 €  
  DE   request
125436693 109

FORNO PER FUSIONE Marconi for sale


MELTING FURNACE MARCONI 14 RR MODEL YEAR 1999 Marconi BRAND Melting furnace Marconi; automatic metal loader hydraulic controls; capacity 1400 kg; Double burner; wait 1 and 1; 2 wells; side discharge and cle ...

 
MELTING FURNACE MARCONI
14 RR MODEL YEAR 1999 Marconi BRAND
Melting furnace Marconi;
automatic metal loader hydraulic controls;
capacity 1400 kg;
Double burner;
wait 1 and 1;
2 wells;
side discharge and cleaning;
gas powered for more information contact us at + 39 030 725026 from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00
 
Price  
  IT   request
125460508 205

FORMAT 4 profit H350 16.50 for sale
5-Axis Machining Centre


Weight approx.: 9000 kgDimensions (l x w x h) approx.: 8590 x 4060 x 2600 mmsoftware: Woodflash working length x-axis: 5000 mmworking width y-axis: 1500 mmworking height y-axis: 150 mmmain spindle: 12 kWtool changer: 18- ...
used machine
 
Weight approx.: 9000 kg
Dimensions (l x w x h) approx.: 8590 x 4060 x 2600 mm
software: Woodflash
working length x-axis: 5000 mm
working width y-axis: 1500 mm
working height y-axis: 150 mm
main spindle: 12 kW
tool changer: 18-fach / 18-fold + 10-fach / 10-fold
vacuum pump: 90/108 cbm/h
drilling head vertical x-axis: 7 piece
drilling head vertical y-axis: 5 piece
drilling head horizontal x-axis: 4 piece
drilling head horizontal y-axis: 2 piece
saw unit: ja / yes in X
changing unit: ja / yes
edge gluing unit: nein / no
travelling way X-axis: 6000 mm
travelling way Y-axis: 1970 mm
travelling way Z-axis: 455 mm
Description: A young gantry-style CNC machining center with double-sided digital driving portal.

5-axis gimbal electric spindle 12 kW (S6) HSK F63, 24,000 rpm
Automatic central lubrication

Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in Y-direction.
Horizontal 6 spindles:
4 spindles in the X direction and 2 spindles in Y-direction.
Forward stroke = 70 mm, max. Drill length = 70 mm and shank D = 10 mm.
All spindles are individually driven and available.
1 grooving saw - in X- Direction:
Max. Saw blade diameter 120 mm, max. Blade thickness 5 mm, max. number of revolutions infinitely variable up to 7500 rpm.

8 workpiece supports:
with front and rear stop row. Vacuum dual-circuit system with Suction cup height 100 mm.

Positioning display of the workpiece supports and vacuum cups in the CNC board.
The exact position of the vacuum cups on the workpiece supports is indicated by laser.

Hand-held terminal for controlling the axle speed incl. Emergency stop switch

Safety system with photocell on the front

18-fold plate changer traveling in X:
Max. Tool diameter 250 mm
Max. Tool length 280 mm

automatic tool length measuring system
2017
used machinery auction RESALE 27,500 €  
  CH   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More SIDE models (2 or more machines):
Side TMS1002 (2)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Bottom-spindle copy moulders GRIGGIO T200


Spindle moulder GRIGGIO model T200 with: -side tenoning carriage -extended plane in entrance -adjustable casing, with Aigner fences -feeder at 4 wheels -top suspended electric box

FORNO PER FUSIONE Marconi


MELTING FURNACE MARCONI 14 RR MODEL YEAR 1999 Marconi BRAND Melting furnace Marconi; automatic metal loader hydraulic controls; capacity 1400 kg; Double burner; wait 1 and 1; 2 wells; side discharge and cleaning; gas powered for more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

CNC Milling Centers INFOTEC 640 G


Milling CNC engraver INFOTEC 640 G was produced in 2007. The machine worked mainly in laminates-a wide range of colors and type (laminate on the outside, inside, silver, gold, imitations metal), aluminium + aluoxyd, Encre noire to capitalize after engraving. Plotter, milling also worked in plexiglass and PVC foamed (was cut). Grawerk? is characterized by high precision work. Milling CNC engraver INFOTEC 640 G-technical data: -area X, Y: 400 x 600 mm -Z axis: 100 mm

Monarch-Scalvos Protti good models excellent conditio


MAJOR TEXTILE Knitting PLANT LIQUIDATION (Please your intrest with confirmed target price immedaitely) KNITTING 12 Monarch FIL 8AEQ, 30", 4-18 cut, 8-24 cut, 84 feed 2 Monarch FIL 8AEQ, 30", 18 cut, 84 feed, 50 % lycra 10 Monarch FIM 108A, 30", 24 cut, 108 feed 1 Monarch FDR Rib, 26", 14 cut, 52 feed 3 Monarch Rib, 26", 14 cut, 52 feed, Lycra 1 Monarch Rib, 20", 14 cut, 40 feed 1 Monarch SEC Electronic Striper, 30", 16 cut, 36 feed 6 Monarch FXC4S, 30', 20 cut, 122 feed 4 Monarch RACE, 30", 28 cut, 122 cut 1 Monarch STEP JACK, 30", 20 cut, 72 feed 14 Monarch RXDF, 30", 122 feed, 3-24 cut, 6-22 cut, 5-18 cut, 24 Monarch RX4S, 26", 104 fd, 2-28 cut, 4-24 cut, 9-18 cut, 9-22 cut, 7 Monarch FXC 4S, 26", 20 cut, 104 fd. 6 Monarch RX4S, 26", 20 cut, 104 fd. 8 Monarch RX WSY Striper, 30", 48 feed, 5-16 cut, 1-18 cut, 1-28 cut FLAT KNITTING 2 Protti PV94 Doublelock, 240 cm, 12 gauge 6 Protti PT222, 213 cm, 12 cut 9 Protti PT242 Jacquard, 218 cm, 12 cut 35 Stoll JBOMB, 150 cm, 160 cm & 180 cm, 12 gauge DYEING 1 Gaston Jet Dye, 80 lb., 1996, M6000 Controller 4 Sclavos Jet Dye, Venus HT3, 3 port, 1000 lbs., 50 PSI, 1999, updated Recore controls, 2014-15 3 Gaston Futura, 2 port, 1000 lbs., 53 psi, Barco controls, 1987 1 Gaston Futura Jet Dye, single tube, 160 lbs,, 1992, M3000 controller 4 Recore Dye Machine Controllers, 2012-14 6 Then Airflow, 1200 lbs., 3 strand/3 ports, 1988 1 Then Airflow, 400 lbs., 1 port, 1987 3 Arganthan Jet Dye, 80 lbs. each, 60 PSI, 1982-80 1 Arganthan Jet Dye, 400 lbs., 60 PSI, 1982 11 Arganthan Jet Dye, 4 ports, 1000 lbs., 60 PSI, 1980 7 Gaston 824 Jet Dye, 5-3 port, 2-2 port 200 Stainless Mixing Tanks with mixers, 50 to 250 gal. 200 Dyehouse Trucks, 72" x 42" wide x 35" dp. FINISHING 1 Santex Santastrech Plus 120, 48" wide, 120 cm, balloon extractor, 5 to 60 YPM, 1994 1 Santex SANTASHRINK Dryer, 220 cm wide, with pin tenter entry, 1994, 6K/220 Gas IR SRS + SPR+FOUL+CUT, gas fired, 6 chambers, 2400 lbs./hour evaporation capacity, 6.1 mil BTU/HR 1 TubeTex Dryer #6 gas fired drum, entry with 3- Fabcon Padders 1 Bianco Slitter, 86" wide, Bianco slitter head (updated 2015), rope squeeze, detwister, folder, stainless steel 1 Bianco Slitter, 86" wide, opener and detwister, 2 scrolled rolls, flat folder 1 Stentex Tenter Stentotherm 3300, 1995, 2400 mm max. working width, unwind, J box, Dogal uncurler, 2 Santex Padders, 102" wide, Bianco Weft Straightner, E & L guiders, low profile gas fired 12 zones, 1 Krantz Syncro Shrink Conveyor Dryer, 100" wide belt 2 Famatex Tenter #1 & #2 3 Tube Tex Drum Dryers, 48" wide & 72" wide 1 Fabcon Drum Dryer, 8 zone 5 Tubular Inspection machines 6 6 Fabcon Tubular Gullwing Tubular Compactors, 52" wide Fabcon & Tubetex Tubular Calendars, 50" & 60" wide 1 Argathen Bleach Range, 10 section, 2200 lbs. hour. 1 Jemco Bleach Range, Model III 2000 CBR, 2,000 lbs. hour, 1995 1 Curtis & Marble, plastic roll wrapping 1 Bespoke Dye Mixing System, Year 2000, 16 pumps, 2 Model SRD Exact Weigh liquid chemical collecting, mixing, batch weighing, 2 IR dual head centrifugal pump, Mettler intergrated scale 1 Tube Tex, drum dryer 1999, with 3 Tube Tex tubular padders 1 1 Monforts Knitgoods Toptex 92" wide, open width rubber belt compactor, Kombi Batcher, steam heated main cylinder, 1990 Fabcon Open Pin Tenter, 90" wide x 20' long, steaming section, batcher 1 LABORATORY: Raitech Quickwash, DataColor 500, Milnor Washer, Huebsch Dryer 50 lb., PLUS MANY MORE ITEMS 25 Merrow Sewing Machines, with table and motor 2 Gardner Denver Air Compressor, 60 HP 1 Gardner Denver Air Compressor, 200 HP 3 Ingersoll-Rand Screw Compressor, 2- 250 HP, 1-150 HP 3 Propane Storage Tanks, 30,000 gallon, with mixer 4 Stainless Steel Outside Tanks, 6000 gal to 10,000 gal. 3 Waste Balers, vertical style 2 Cleaver Brooks Package Boilers, 800 HP, 1988 + 1989, dearator system PLEASE CONTACT US FOR FURTHER INFORMATION .

Paper cutting machines Polar 115 N Plus


Polar 115 N Plus Year: 2016 Touchscreen Chrome Air table Side Tables Like New Available immediately Located in Turkey Technical Data: Cutting Size: 1,150 mm Feeding depth: 1,150 mm Feeding height max.: 165 mm Machine size: Length: 2,560 mm, Height: 1,710 mm

Plastic injection machines THYSON L-25


Production line for PVC pipes THYSON L-25 (1993/2000) is a line of three pipes. PCV line THYSON L25 consists of: -extruder THYSON/PAR 2-88 -extruder side METALCHEM/2T14/8 m -REIFENHAUSER/KKE-R0250 -cooling bath REIFENHAUSER/KKE-R0250 -cooling bath REIFENHAUSER/KE25/4 -saw SICA/TSQ -REIFENHAUSER kielichuj?cy/BA. CAH. 1T 50.250 -dust Extractor SICA model P-250/4 Technical data: -production performance: up to 350 kg -capacity: 75-250 mm -reconditioned in the year 2016

Carousel Turning Machines (Lathes) CONDOR KROMERIZ STANKO 1516


Maximum diameter of folding support: 1600mm Maximum turning diameter by side support: 1600mm Maximum workpiece height: 1000mm Max. workpiece weight at revolutions of the clamping plate 4-125ot / min 6000kg 150-200ot./min. 2400 kg Number of steps for horizontally adjusting the support: 18 Feed rate range for adjustment: 5-1840 m.min Number of slides for slide: 18 Slide displacement range: 0.03-12.5mm / revolution of the clamping plate Number of positions of the turret head: 5

Profiling Systems INTESO S3130T


Perforating machine INTESO S3130T was produced in 2011 year in the Czech Republic. Technical data machine profiles INTESO S 3130 T: -control panel screen: SIEMENS -maximum length: 3000 mm -the maximum cross section profiles dziurowanych: 120 x 80 mm; fi 80 mm -feed automatic linear drive -optical sensor for automatic control of the correct length of workpiece -linear positioning stroke hydraulic cylinder -bezdeformacyjna perforation technology -the possibility of perforation of the profiles of various shapes -program memory perf -perforation, double-sided (in a single operation) and one-sided-automatic lubrication Tool equipment top INTESO S3130 T: -perforated profiles: 40 x 27 x 2; 30 x 30 x 2.0 -punches and dies: 18 mm; 18 x 18 upper matrix, matrix Perforating line INTESO S3130T CE certification.

Welding Machines KT7 KTP 300-150


Plasma cutter KT7 KTP 300-150 manufactured in 2016. The set includes: plasma source, plotter and screw compressor. Technical Data: -field work: 150 x 300 cm -precision stepper motor-based drives (servo motor) -the structure of the gate running, Y axis -double sided operator coupled mechanically -the application of very rigid and stable frame structure -Y axis: 4.7 NM ratio -X axis: 3.2 NM -Z axis: 3.2 NM -working speed for G0:16000 mm/min. (40000 mm/min-with servo motors) -water table which gives a cleaner cut, cooling and reducing emissions of gases during machining -corrosion protection design of hot galvanizing and specialised polyurethane paints -metal detection -protection system corruption of a burner -torch height control over the sheet of THC -handle antykolizyjny burner -precision ustawoanie punching sheet metal (longer life supplies the burner) -modern desktop operator with 19 "screen and the computer -external USB port that allows you to open files using the pen-drive -high precision cutting does not require further complex machining -software based on Linux-much greater stability than Windows -the total weight of the machine: ok. 800 kg CAM Software: -burning outside the useful edge -external, internal offsets -import files in DXF format -selection of parameters of smoking -software in Polish language SheetCam program to generate common shapes and simple distribution of parts on the sheet Screw compressor-technical data: -power: 5.5 kW -pressure: 8 bar -capacity: 0.85 m3/min. -capacity: 51 m3/h -weight: 340 kg -tank: 500 L -dimensions (l x w x h): 2030 x 650 x 1500 mm

Numerically Controlled Machining Centres MORBIDELLI M100


Full equiped demo 5 axis CNC working center for drilling, routing and cutting. - year of production 2018 - boring unit 31 borers - 5 axis agregate 10 kW - HSK F63 max. 24.000 r.p.m. - Xilog Maestro software - PRO-SPACE SAFETY SYSTEM - working dimensions 3110x1620x180 mm - Z axis hood - 560 mm, clearance 180 mm - TECpad remote control - 2 pc tool changer, TBR11 linear + fast 14 beside motor - total 25 - 4 lifting assistance device - pods 145x145 12 pc - rotating pods 145x55 mm 6 pc - vacum pump becker 250 m3/h Machine has been used around 20 working hour.VERY GOOD PRICE FOR DEMO MACHINE!

One-sided edgebander Jaroma DCKG JAROMA DCKG


UNIVERSAL JAROMA DCKG edbander WITH PREMILLS Jarome producer Model / machine type DCKG Year of production 2007 Machine category. One-sided edgebander Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments The GCKG edgebander is designed for unilateral banding of narrow furniture elements. In addition, the edge bander allows you to perform basic machining operations such as: - cutting off the periphery at the front and the back of the element AND THE PRELIMINARY MILLING OF THE FIRST TWO CUTTING STATION - milling excess edging height - removal of the corrugated surface created during milling (scraping) of the edges of PVC and ABS - milling (rounding) corners - smoothing (polishing) the machined edges The natural and plastic edgings that can be used for processing include: standotron, veneer, PVC / ABS tape with a maximum thickness of 3 mm, wood elements with a maximum thickness of 5 mm (when machining wood attachments, cutters are not used to round the corners) .

Filling Line KHS 50 000 bph and returnable KHS GmbH Glass bottles 0.33 and 0.5 ltr


Filling Line KHS 50 000 bph new and returnable bottles glass bottles This line is made by KHS in year 2005 and it was in operation till July 2013. It still installed, fully operational and is suitable for filling 0.3 – 0.5 liter glass bottles with beer and soft drinks, capacity upto 50 000 bph in 0.5 liter bottles. This line has also a bottle washer but not crate handling Main Characteristics • Capacity 50 000 bph at 0.5 liter bottles • Made by KHS in year 2005, in operation till 2013, still installed • For both new and returnable glass bottles, operated for 0.5 liter bottles only • Secondary packaging Kisters shrink tray packer and KHS palletizer • Operation controls made with Siemens Simatic S7 PLC system • Complete line in fair condition and immediately available for relocation List of main equipment 1. Bottle Depalletizer KHS Innopal 2. Bottle Washing Machine KHS Innoclean – compact design a. Capacity 55000 bph b. Double ended c. Two washing sections and a rinsing section 3. Empty Bottle Inspector OMNIVISION II by Filtec year 2008 4. Filling Block KHS Innofil DMG VVF/SVF, year 2005 a. Rinser with 112 heads b. Filler with 120 filling heads c. 18 capping stations for crown cork d. Hot water injection for beer foam creating before closing e. Automatic outside washing system f. Comes with 2 sets of spare parts for each (two) bottle format g. Crown cork feeding system by MSN Magnettechnik (with magnet conveyor) 5. Level Inspection System KHS Metec Promecon 4000 with two measuring bridges (x-ray) 6. Flash Pasteurizer KHS Innopro KZE a. with 11 m3 buffer tank, diameter 2.0 m, insulated 7. Air Dryer ACI one section approx. 2 meters 8. Labeling Machine KHS Innoket KL 2080, year 2005 a. Type KL 2080-40/120-48 PM P1 b. With two labeling stations for 3 labels – front, back, neck c. How glue system d. Inbult Date printer Lasetec (laser) e. Data printer Videojet inkjet printer Excel 170 i 9. Label Inspector KHS Metec Promecon 3000 with measuring bridge (x-ray) 10. Kisters TSP 050 B Secondary Packaging Machine, year 2005 a. For tray, film and colored film b. Packaging configurations 5 x 4 (6 x 4) 11. Transport system with two lines after secondary packaging for correct palletizer feeding with package turning unit 12. Palletizer KHS Innopal PN 1 N (H) 2 13. Pallet stretch wrapping machine Robopak 14. Pallet conveyor to warehouse

Paper cutting machines POLAR 92 EMC with jogger


POLAR 92 EMC Year : 1991 With air tables right and XXL left tables Cells Monitor has to be replaced, can be a LCD monITOR WITH JOGGER POLAR RAB 2 Year : 1991 Size table : 72 x 87 Table height 860 x 950 mm Left and right side opening With air removal rollers

Four-sided planing machines SCM COMPACT 23K


Moulding machine 4 spindle + neutral Scm Compact 23K composition: Bottom spindle kW 7,5 Right and left spindles one motor kW 7,5 Upper spindle kW 5,5 Neutral spindle kW 5,5 Max width of work (finished section) 230 mm Max height of work (finished section) 125 mm Diameter of spindle tools-holcer 40 mm Useful length vertical spindles 140 mm Useful length horizontal spindles 253 mm Length neutral spindle 230 mm

Four-sided planing machines SCM SUPERSET XL


Moulding machine Scm Superset XL 5 shafts: Bottom kW 4 Right kW 5,5 Left kW 5,5 Upper kW 7,5 Bottom kW 4 Max width of work (finished sect.) 240 mm Min width of work (finished sect.) 25 mm Max height of work (finished sect.) 120 mm Min height of work (finished sect.) 6 mm Min length single piece 620 mm Diameter spindles 40 mm Useful length horizontal spindles 250 mm Useful length vertical spindles 140 mm Length entrance worktop 2500 mm Electronic programmer SPV232: n.99 programs of thickness and width positionning Automatic lubrication of the worktop

Press 1222


MELTING FURNACE MARCONI BRAND Marconi MODEL RR 14 YEAR 1999 DESCRIPTION-melting furnace Marconi; automatic metal loader hydraulic controls; capacity 1400 kg; Double burner; wait 1 and 1; 2 wells; side discharge and cleaning; gas powered for more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

Laser Cutting Machines BLM ADIGE GROUP LT823D


Laser 3D BLM ADIGE GROUP LT823D for tubes and profiles was built in the year 2010. Technical data laser 3D BLM ADIGE GROUP LT823D: -CNC control: SIEMENS Sinumerik -head: 3D -crystal resonator: Rofin -worked hours: 36979 h Operating data: -the minimum length of the workpieces: 3200 mm -maximum length of details: 6500 mm -maximum weight of workpiece line: 15 kg/m -maximum weight of workpiece total: 100 kg The dimensions of the parts: -round: 12-140 mm -round (optional): 12-152.5 mm -square section side: 12-120 mm -rectangular cross-section and flat oval: maximum described: 170 mm -minimum size: 10 mm -the maximum dimension: 140 mm -the maximum dimension of the side (optional): 150 mm -the maximum difference between the sides: 110 mm -the minimum difference between the sides: 5 mm -maximum load capacity of the loading table: 4000 kg -maximum length of unloading table: 4500 mm Overall dimensions (l x p x h): -the whole installation without content 4500DC K 20/25:15556 x 4600 x 2237 mm -machine: 10514 x 4600 x 2237 mm -the weight of the machine: 9000 kg Hydraulic system: -tank capacity: 25 l -flow rate: 25 l/min -pressure: 70 bar Pneumatic: -pressure: 6 bar -flow rate: > 500 Nl/min

Bespoke Bagtumbler


Make: Bagtumbler Model: Bespoke Model Condition: Used Machine type: Other Location of machine: UK Machine Details Manufactured by Bespoke Handling Equipment Consists of a vacuum drum, which then rotates to mix. Equipment Use The equipment works by putting a quantity of pigment into a plastic bag which goes inside the drum, the vacuum then ensures the bag remains in place, the drum rotates and the material is mixed. Further documents available

Press Brakes Trumpf TrumaBend 80/3.F 3000 x 80ton


Trumpf TrumaBend 3000 x 80t press brake 4 axes CNC delem 58 video-graphic automatic locking of tools the side barriers are only dismantled set of tools up/down, new year of production 1994, not CE! can be seen under voltage Italy-North

Cutting-To-Length Lines FIMI


band width 100 – 1.300 mm band thickness 0,30 – 3,00 mm tensile strength (until 2,2 mm thickness) max. 1.000 N/mm² yield strength (until 2,2 mm thickness) max. 820 N/mm² tensile strength (until 3,0 mm thickness) max. 800 N/mm² yield strength (until 3,0 mm thickness) max. 650 N/mm² elongation max. 20 % coil weight max. 30,0 t coil inside – Ø 508 / 610 mm coil outside – Ø 600 – 2.100 mm sheet length 250 – 3.000 mm package weight max. 5.000 kg package height incl. palette max. 560 mm inlet speed 15 m/min. working speed max. 90 m/min. pass line height app. 1.100 mm working direction left ? right the line consists of: stocking ramps for 2 coils min. coil outside diameter 900 mm entry coil car centering device decoiler motorized mandrel – Ø 508 / 610 mm press roll motorized outboard bearing Support coil opener telescopic press roll strip centering device crop shear – hydraulically scrap box transfer table leveler 6 HI 2 cassettes with leveling rolls cassette 1: no. – leveling rolls 19 leveling roll diameter 43 mm cassette 2: no. – leveling rolls 19 leveling roll diameter 52 mm no. – back up rolls 5 sets, upper and lower cassette quick change device felt cleaning device tachometer wheel pinch roll at shear entry rolls driven by DC motor rotary shear VECTRONIC pinch roll driven by AC motor strip belt conveyor at the VECTRONIC shear exit place for oiling machine (customer’s supply) sheets conveyors to scrap carriage and stackers deflecting conveyor with 3 positions scrap box movable by AC geared motor scrap carriage for scrap length of max. 1.100 mm connecting conveyor to stacker 1 connecting conveyor to stacker 2 automatic stacker units: stacker 1 non-stop operation for sheets up to 3.000 mm length stacking with wooden pallets stacker 2 non-stop operation for sheets up to 3.000 mm length stacking with wooden pallets lifting stacking platforms 2 pieces for sheets up to 3.000 mm length hydraulic hydraulic oil pressure 120 bar pneumatic normal compressed air pressure 6 bar electric three phase voltage 380 ± 10% V, 50± 2 Hz auxiliary voltage 220 ± 10% V, 50± 2 Hz solenoid valve voltage 24 V DC. total power consumption 480 KVA

Paper cutting machines POLAR 137 EMC Monitor Autotrim


Autotrim Air table 2 side tables 2 knives Photo cells Program Machine complete, in good working conditions.

Paper cutting machines POLAR 92E


Air table 2 side tables 2 knives Photo cells Program

CNC Plasma Cutter MESSER GRIESHEIM CORTINA DS 3100


Track width: 3100mm, working wdith: 2000mm, dead length: 1500mm, total width: 3525mm, control side: left, power supply: right, gas: propane, with plasma cutter MESSER GRIESHEIM HYPERTHERM HT4400, ventilation system DONALDSON and accessories.

Hob Grinding Machines ZFWZ 3150


The maximum diameter of the workpiece without steady ø3150 mm Maximum diameter of the workpiece steady Ø1600 mm The minimum diameter workpiece ø175 mm The largest width of the tooth milling cutters Ø350 mm at engagement angles of 1000 mm Max module incised teeth 30 mm The greatest distance from the center of the table fixing inside the milling spindle 1800 mm The largest width (B) cutting teeth Mills - spindle milling Max milling diameter ø 350 mm Max cutter length 400 mm The wheelbase between the milling spindle and the spindle mounting 300-1800 mm - Without steady max 1800 mm - Without steady min 300 mm - The steady min 300 mm The ability to manipulate the spindle milling (manual or automatic) 500 mm Cone for pin milling metric 80 Sleigh milling tilting up to 1950 The diameters of burrs ø50; ø60; ø80 table bracket diameter ø2400mm Ext hole in the table ø500mm Hole depth of 1000 mm The biggest load of 30 tons Number of T-slot in the table 12

Carton closing machines Soco T10


Soco systems Model: T10 Case taper Serial: 49692 top and bottom case taper, side grip belts, max box 500mm L x 450mm W x 500H, mobile, 3Ph

Vertikal Turning Machines (Lathes) Stanko Ø8000 x 3240 x 125 T


Technical characteristics. The largest diameter of the workpiece - 8000 mm The greatest height. workpiece - 3240 mm The diameter of the disc table - 7100 mm The biggest shift sliders rests vertical (right and left) - 2000 mm The highest levels of vertical travel of the slides (right and left) - 4400 mm Mileage axis slider slides off the center of the shield handle - 150 mm Vertical rotation angle bracket right - -15 ° - 30 ° Vertical rotation angle bracket left (combined) - -15 ° - 30 ° Sliding horizontal slider bracket side - 1250 mm Vertical travel of the slider carriage side - 2,800 mm Maximum weight of the workpiece at a speed table to 15.5 rev / min - 125 tons Maximum weight of the workpiece at any speed - 63 tons The speed range of the table - 0.23 - 19,3obr / min * The largest total cutting force - 160 kN The biggest moment of cutting - 400 Nm Range of feed carriages vertical and horizontal - 0.0352 - 275mm / min The feed rate accelerated sliders and carriages - 2400 mm / min The speed of the beam - 300 mm / min Main engine power - 25 kW Lifting capacity of the crane - 75 ton Suport combined (slide left) Boring spindle diameter - 125 mm Spindle stroke - 1000 mm Maximum torque of the spindle - 3500 Nm Spindle speed n - 20 - 650 r / min Number of degrees of speed spindle - 16 Max-min vertical feed spindle - 0.0352 - 215mm / min The rate accelerated feed spindle - of 2400 mm / min Shift the slider to slide in the y-axis - 2000 mm Feed range slider and bracket Min - 0.0352 mm / min Max - 285 mm / min The feed rate accelerated slider and slide - 2400 mm / min The greatest strength of the cutting blade when running from the front bracket L <= 1000 mm - 80 kN L <= 1700 mm - 50 kN L <= 2300 mm - 30 kN The extreme angles of rotation slide - -15 ° - + 30 ° The electric motor drive main spindle - 10 kW Max spindle feed force - 30 kN Cone Size spindle DIN 2080 - Metric 80

Bright Beert Tank BBT Holvrieka 400 hl Holvrieka, Denmark Vertical, insulated


Bright Beer Tank BBT Holvrieka 400 hl vertical insulated This BBT is made by Holvrieka in 2003. The tank has a special supporting skirt, normal vacuum and overpressure valves on the top and a CIP bowl inside. Tank is insulated (150 mm PU foam), and cover is gladded. Manufacturer Holvrieka Manufacturing year 2003 Vertical, insulated BBT Volume 400 hl (net), 410 hl (gross) Number of tanks available 2 Insulation 150 mm PU Cooling No cooling jacket Tank dimension Diameter 2.7 m, Height 11.8 m Weight 8700 kg

Carton closing machines SIAT SM8


Siat SM8 Case Sealer Semiautomatic taping machine with side straps and manual adjustment on the different box sizes. The simple and robust steel design, place it at the forefront in its field. Sealing with adhesive tape of boxes through the simultaneou ...

Spiral Mixer KEMPER PRESIDENT 100a


Capacity: 235l.

Vertical turning lathe RAFAMET KCF-320


Table diameter: 3200 mm Max turning diameter: -With vertical carriage: 3500 mm -With side carriage: 3200 mm Table speeds range: 0.8 - 40 rpm Table speeds number: 18 Max work-piece: -Height: 1850 mm -Weight: 25 ton Feeds: -Number: 12 -Of v ...

Universal drilling machines AYEN AYEN HVHV


AYEN HVHV modular drilling machine Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments DRILL DRILL 4 REAR UNITS, TWO UPPER, TWO SIDE, WORKING LENGTH 3 M ...

Four-sided planing machines Weinig Unimat U17N


Moulder Weinig model Unimat brand U17N, 7 + 1, tour smooth shafts, shaft length 170 mm horizontal, hauling in cardano. Composition axes: Under, dx, sx, dx, over, under, over, universal. Motor power 4 + 3 + +7.5 +5.5 ACEs: 7.5 +11 +4 +11 Kw Tow motor po ...

Blow Molder SIDEL SBO 10 for PET Bottles SBO 10/14 Four, Serie 1 12000 bph in 1.5 L


Blow Molder SIDEL SBO 10 for PET bottles 12 000 bph This PET bottle blow molder is from recently dismantled PET filling line. It comes with complete preform feeding system and approximately 50 meters of air conveyors are available at additional cha ...

High speed cutters Polar 78 ES


Airtables, Sidetables

Electrical Discharge Machines (EDM) CHMER CMC865C


Table size (WxD): 1000x600 mm Woek tank size (WxDxH): 1600x1000x550 mm Table travel (X/Y): 800x600 mm Ram travel (Z): 500 mm Distance from Ram platen to work table: 300-800 mm Max. Electrode weight: 350 kg Max.. work-piece weight: 4000 kg Outside d ...

Carousel Turning Machines (Lathes) Sedin 1512


Used Sedin carousel lathe model 1512. Complete with side support and turret head. Movable swing panel - 4 jaw on level disc. Technical data: Turning diameter: 1250 mm Level disc diameter: 1100 mm Turning height: 1100 mm Main motor: 30 kW Weight: ...

Double-sided 5-axis pin bank


Auction name: Machines, rolling stock and building materials in Amsterdam Online auction Start of auction: 25 April 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 08 May 2018 18:01 GMT +0200 (Western Europe (DST) The price listed is ...

Double-end tenoning machines Balestrini Single side tenoning


Tenoning machine Balestrini single with one head and two banks, used.

Blow Molding Machine SIDEL SBO 12 Series 2+ SIDEL 19.200 bph Series 2 PLUS


Blow Molding Machine SIDEL SBO 12 series 2 Plus - 19200 bph with all auxiliaries This stretch blow molding machine SIDEL SBO 12 was built in 2003 as series 2 and upgraded to series 2 Plus in 2007 by SIDEL with their AIRBACK and the speedkit for 1.600 b ...

Filling Line for Water in PET Bottles 30.600 bph SIDEL - 0.5, 1.5 & 2. for still and sparkling water


Filling Line for Water in PET Bottles SIDEL 30600 bph This line was deivered by SIDEL in year 2003 and it has been filling sparkling water in 0.5, 1.5 and 2.0 liter PET bottles. The line is complete from blow molder to secondary packaging and palletizi ...

Tunnel Pasteurizer Double Deck 90.000 bph SASIB Beverages S.p.A. PAMA 6512 DR


Tunnel Pasteurizer Double Deck SASIB PAMA 6512 DR, 90.000 bph This is two deck design tunnel pasteurizer was made by SASIB (now Sidel) in 1998 and it was refurbished in 2012. This pasteurizer features the Walking Beam conveyor system, which is very re ...

Steam pressing plants ARIOLI STEAMER + PADDER


ARIOLI STEAMER FOR FABRIC, MODEL VP+F02 , YEAR 2001 ROLLER WIDTH 2.200 MM CLOTH CONTENT 350 M TEMPERATURE: T – 105°C (steam) ± 5°C Tmax – 200°C (HT with thermos oil) 2 COOLING DRUMS HEATING SYSTEM INSIDE THE CHAMBER: - There are steam nozzels insi ...

CCT Fermentation Tanks Landaluce 2085 hl Landaluce, S.A., Spain indoor, vertical, 2 cool.zones


CCT Fermentation Tanks Landaluce 2085 hl Indoor type vertical beer fermentation CCTs tanks delivered by Spanish Landaluce in year 1997 Totally 17 tanks, each with two cooling zone on the side of the tank, cone is not cooled. Cooling media is glycol sol ...

CCT Fermentation Tanks Holvrieka 2400 hl Holvrieka indoor, vertical, 4 cool zones


CCT Fermentation Tanks Holvrieka 2400 hl Indoor type vertical beer fermentation CCTs tanks delivered by Holvrieka in year 1999. Totally 22 tanks, each with four cooling zone on the side of the tank, cone is not cooled. Cooling media is glycol solution ...

Labeler SIDEL Alfa Rollquatro F25 Sidel Alfa Inc Hot Melt Glue 42.000 bph


Labeler SIDEL Alfa Rollquatro F 25 Hot Melt Glue with auxiliaries This Alfa Rollquatro labeler was installed in 2006 and it was operated time to time till 2014 total operating hours not exceeding 10 000 hours! Rollquattro is a rotary wraparound labele ...

Carton Box Former Formeca CF-12 GT Formeca Oy, Finland Sales Carton Former CF-12 GT


Carton Box Former Formeca CF-12 GT Totally 9 units of excellent condition carton formers FORMECA CF-12 GT for sale. EX NOKIA Units. In manual packing lines of electronic industry these FORMECA CF-12 GT Carton Formers is designed to form side-glued cor ...

Beer Fermentation Tanks CCT Ziemann 36 x 3400 hl Ziemann - Bauer GmbH Indoor, 3 cooling zones


Beer Fermentation Tanks CCT Ziemann - Bauer 36 x 3400 hl. Indoor type vertical CCTs tanks made by Ziemann - Bauer in year 2000, still installed and in good condition. There is 36 tanks, each has two cooling zone on the side of the tank + cooled conical ...

CCT Vertical Fermentation Tanks 15 x 7920 hl Ziemann Holvrieka Never, vertical outdoor


CCT Vertical Fermentation Tanks 15 x 7920 hl – Never used These large CCTs were installed in 2004 but they are never used. They have tree side cooling zones for net volume of 6336 hl and total net volume being 7460 hl, cone is also cooled, cooling medi ...

Can Filling Line SIG Simonazzi for CSD capacity 36.000 cph can sizes 237, 250 and 330 ml


Can Filling Line SIG Simonazzi for CSD – 36 000 cph This line was rebuilt in year 2007 for filling carbonated soft drinks in small aluminum cans – rebuilding was made by SIDEL / SIG Simonazzi and plenty of new machinery, including 250 ml can filler, wa ...

AUTOMATIC SINGLE-SIDED EDGEBANDER FMB MOD. BM/E FMB BM/E


AUTOMATIC SINGLE-SIDED EDGEBANDER FMB MOD. BM/E unit: end trimming unit top and bottom trimmin unit with inclination CE year of production 1997
Find used machinery dealers in your country