british flag
Resale Logo

RC used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used construction plants  König Baumaschinen - King Crushers  http://www.baumaschinen-koenig.de 
banner logo
start page > keywords RC > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125465350 901

ZUGMASCHINE T1) Steyr Daimler Puch 760 a for sale


last off Code: BH-80088 First registration: 18.12.1979 elapsed. Hours of operation: 4.208 h Output: 44 kW Displacement: 1,140 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to Â&se ...

 
last off Code: BH-80088
First registration: 18.12.1979
elapsed. Hours of operation: 4.208 h
Output: 44 kW
Displacement: 1,140 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: 295.05-3685
Equity / total weight: 2,517/4,500 kg
Color: grey
Facilities: with headlamps above installed, safety signal lamp
Tyres: Max. Axle load front 1,750 kg, allowed axle load rear 2.300 kg, documentation: licence of types of available key: 1
Comments to the State: motor does not start, gearbox is leaking, axes are leaking, corrosion game on the steering linkage and steering column, have strong bearing clearance at rear axle, brake lines and hoses partly rusted and cracked, Total failure cable fire, batteries, frame has some significant corrosion damage, hydraulic system results in oil loss, paint largely bleached out, div. Rust all around vehicle, abrasions, and dents all around vehicle, rust spots on wheels,
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2420-0-350-0014 and 2420-0-550-0005
 
Price  
    request
125461583 1009

BOMAG BW 226 RC-4 Variocontrol for sale
Mini excavators up to 7t (Mini diggers)


25,7 to net weight, barrel train, rock crusher bandage, Variocontrol, BTm with printer; Power [PS]: 201; Gross weight [kg]: 25700; Engine: Deutz TCD 2012 L06; Rear tyres remaining: 50; Front tyres remaining: 70
used machine
 
25,7 to net weight, barrel train, rock crusher bandage, Variocontrol, BTm with printer; Power [PS]: 201; Gross weight [kg]: 25700; Engine: Deutz TCD 2012 L06; Rear tyres remaining: 50; Front tyres remaining: 70
2008
Price  
  AT   request
125465341 2404

MOBIL-KRANWAGEN ÖAF Gräf & Stift for sale


last off Code: BH-82028 First registration: 17.07.1981 FIN: 6970353 elapsed. Mileage: 397.141 km power: 285 kW Displacement: 12.763 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to &A ...

 
last off Code: BH-82028
First registration: 17.07.1981

FIN: 6970353
elapsed. Mileage: 397.141 km power: 285 kW
Displacement: 12.763 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: 20-320 G6-LTMF1
Equity / total weight: 23.050/23,400 kg
Color: grey
Equipment: Cloth - and leather interior with rear-mounted on Liebherr crane cab model LTMF1030V, serial number. 0011621, YEAR 1981
Documentation: types of licence available
Key: 1
Comments on the condition: engine oil and fuel loss, v-belts, hydraulic blower leaking, MA oil loss, Wishbone broken MA, VA pushrod defective, Luftpresser poor performance, articulated wheel rim on several points touched on, lights broken heater is to examine, hydraulic pump leak, leakage of crane hydraulics, various paint damage all-round vehicle as well as dents and rust, holes with rust spots behind passenger door front right,.
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-400-0041 and 3950-0-400-0199
 
Price  
    request
125461609 1009

BOMAG BC 601 RB for sale
Mini excavators up to 7t (Mini diggers)


27t, 3800 mm blade, machine is in workind condition and can be tested on site; Engine: Deutz BF6L513RC; Rear tyres remaining: 60; Front tyres remaining: 60
used machine
 
27t, 3800 mm blade, machine is in workind condition and can be tested on site; Engine: Deutz BF6L513RC; Rear tyres remaining: 60; Front tyres remaining: 60
1991
Price  
  AT   request
125465335 2422

LKW ÖAF Gräf & Stift 20320G2 for sale


last off Code: BH-79040 Year of construction: 1976, vehicle was never approved, authorities must be assumed by the buyer elapsed. Mileage: 132.490 km : KW 235 Displacement: 12.763 cc Test badge: no inspection sticke ...

 
last off Code: BH-79040
Year of construction: 1976, vehicle was never approved, authorities must be assumed by the buyer
elapsed. Mileage: 132.490 km
: KW 235
Displacement: 12.763 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: 6970040
Equity / total weight: 12,900/22,000 kg
Number of seats: 2 in driver's cab
Equipment: material facilities, with rear mounted plane
Documentation: types of licence available
Key: 1
Comments on the condition: engine oil loss, loss of fuel, exhaust system strongly div. rubber bearings for axles and Wishbone rusted, porous, Doppelrollgelenke VA game Achsschenkel have right and left vertical game, compressed air brake system heavily leaking, div. Compressed air hoses porous, brake master cylinder leaking, different steering knuckle heads have Heckzellonen have game, faulty, battery jump, frame, springs and shock absorbers are rusted, missing parts of front, div. parts probably spare parts dispensers, vehicle not ready to go, rust all-round vehicle div. paint damage, paint differences, is pointed out expressly that no complete inventory and check the functionality of the auction object was performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-410-0037
 
Price  
    request
125460816 105

KALTENBACH Diameter sawing blade for sale
Circular Sawing Machines


 
Price  
    request
125465332 2444

ACHS-ANHÄNGER O3) Achleitner 2AANH5 for sale


last off Code: BH-92240 Year of construction: 1989, vehicle was never approved, authorities must be assumed by the buyer Matriculation year: 14.12.1989 Test badge: no inspection sticker must be acquired by the buyer p ...

 
last off Code: BH-92240
Year of construction: 1989, vehicle was never approved, authorities must be assumed by the buyer
Matriculation year: 14.12.1989
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
FIN.: 7240
Weight/payload/total weight: 2,800/5,200/7,800 kg
Color: grey
Construction: Flatbed
Facilities: With tarp
Documentation: types of licence available
Comments to the State: rusted axles, brake system Pneumatic hoses are cracked, heavily rusted tow bar and rotating ring recording, number plate lights yellowed, rusted frame and springs, various rust and paint damage all around vehicle, div. Abrasions all around and in the vehicle, expressly pointed out is that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2330-0-200-0040
 
Price  
    request
125460772 210

SCM Method K for sale
Window production centre


Tenoning spindle: 1 St.Number of milling agregates: 5 St.Spindle diameter: 50 mm In order to sell still in useSCM METHOD K Machining center for windows and doorsTechnical specificationsMax. Working length: 2800 mm(using ...

 
Tenoning spindle: 1 St.
Number of milling agregates: 5 St.
Spindle diameter: 50 mm
In order to sell still in use

SCM METHOD K Machining center for windows and doors

Technical specifications
Max. Working length: 2800 mm
(using the stops)
minute Workpiece length: 200 mm
(clear pin dimension)
minute Workpiece height: 30 mm
Max. Workpiece height: 140 mm
Tenoning speed: 4/16 m / min
Feed rate: 3-15 m / min

Crosscut saw 4 kW with motor horizontal positioning over free
programmable axis control
Speed 3000 rpm
Saw blade diameter 400 mm, bore 80 mm
Extraction nozzle diameter 120 mm
automatic engine brake

Slotted spindle 7.5 kW with

Spindle diameter 50 mm
Spindle clamping length 620 mm
Spindle stroke under table 575 mm
Speed 3500 rpm
Max. Tool diameter 320 mm
upper bearings
Motorized vertical positioning via freely programmable axis control
automatic counter-timber beam
automatic engine brake
automatic star delta connection
Suction nozzle diameter 2 x 160 mm

1st profile spindle 5.5 kW clockwise and counterclockwise
(Synchronization) with
Spindle diameter 50 mm
Spindle clamping length 320 mm
Spindle stroke under table 265 mm
Horizontal adjustment 60 mm
Spindle speed 6500 rpm.
Tool diameter min./max. 100/220 mm
Motorized vertical positioning via freely programmable axis control
automatic engine brake
Extraction nozzle diameter 150 mm

2. Profile spindle 5.5 kW clockwise with
Spindle diameter 50 mm
Spindle clamping length 320 mm
Spindle stroke under table 265 mm
Horizontal adjustment 60 mm
Spindle speed 6500 rpm.
Tool diameter min./max. 100/220 mm
Motorized vertical positioning via freely programmable axis control
Extraction nozzle diameter 150 mm
automatic engine brake

Gear milling unit 5.5 kW with
Spindle diameter 50 mm
Spindle clamping length 160 mm
Spindle stroke 100 mm
Horizontal adjustment 60 mm
Speed 6500 rpm.
Tool diameter min./max. 100/200 mm
pneumatic single stroke programmable via control
Timed horizontal feed-in for insert milling for the execution of
non-continuous grooves via CNC control
Extraction nozzle diameter 150 mm
automatic engine brake

Glass saw 2,2 kW with
Saw shaft diameter 25 mm
Saw blade diameter max. 220 mm
Saw shaft clamping length max. 22 mm
Speed 5000 rpm.
Extraction nozzle diameter 50 mm
automatic engine brake

Motorized, height-adjustable roller feed with
closest roll spacing
Motor power 1.1 kW

complete with
-CE Compliance
- Crosscut saw, tenon cutting and slot part horizontally infinitely programmable
- Slot part 620 mm spindle length, anti-clockwise
- Programmable vertical movement via ball screws
- motor-driven tapping table movement
- automatically trailing splitter wood for all slot tool positions
- Workpiece clamping for single / double wood operation with
automatic pressure drop protection
- precise swiveling tap table +/- 0 - 60 °
- Extendable telescopic length stop with automatic
Differential control, working length 2800 mm
- Programmable vertical movement via ball screw
in position 2, 3 and 4
- Horizontal positioning on manually programmable
4-fold revolver to operate from the front of the machine
for positions 3, 4 and 5
- Continuous roller feed, swiveling for light
Tool change, with additional feed roller for
Milling and motorized height adjustment according to scale
- Glass bead saw with pneumatic vertical positioning on manual
adjustable 4-fold revolver,
Forced guidance of the glass retaining strip with non-return valve, use of the
Glass bead saw automatically controlled via cycle
- automatic synchronization - immersion function of the first
Profile spindle for tear-free milling of sash frames,
Horizontal positioning on manually programmable
4-speed turret to be operated from the front of the machine
- extendable support rail for large format sash frames
- Gear milling unit with pneumatic horizontal positioning,
Use of the glass bead cutting saw via automatic cycle of the
machine program
Vertical positioning on manually programmable 4-fold turret
- CNC machine control via programmable logic controllers
electronics (PLC) type CONTROL 20
- Motor protection switches for all motors
- Operating tools, operating instructions
- Weight 3600 Kg

special accessories

Motor amplification 11 kW in Pos. 2, 3, 4

(Technical information according to the manufacturer - without guarantee!)



This ad was created with MODUL MWS - the software solution of LogoTech.
 
3,000 €  
    request
125465330 2486

PKW M1) VW Golf for sale


last off Code: BH-67005 Matriculation year: 11.04.2006 elapsed. Mileage: not readable Power: 74 kW Displacement: 1.896 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a ...

 
last off Code: BH-67005
Matriculation year: 11.04.2006
elapsed. Mileage: not readable
Power: 74 kW
Displacement: 1.896 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: 1J/ACAXRX0/FM5FM52J067N1N1
FIN: WVWZZZ1JZ6W018023
Equity / total weight: 1,353/1.900 kg
Color: white
Body: hatchback
Equipment: 5-speed manual transmission, CD player, fabric outfit, Electr. Power Windows front and rear, roof rails with special transport lamps design
Tyres: tyres 2 x
Documentation: types of licence available
Key: 1
Comments to the State: rusted exhaust main silencer hull rusted through, easily leaking charge pressure control valve, coupling on the wear limit, div. axle and suspension parts wheel bearing rusted, broken front, grease with Tracking joint sleeve, starter motor running after frame has oxidation, rusted Springs, camber plates left front damaged, battery deep probably emptied or defective, purchased to cover on seats already by worn, rusty spots on hood and front Wheel arches, abrasions at front apron, small dents at wheel arches front right with rust spots, abrasions in the rear apron and loading area for tailgate, sticker residue, abrasions at front bumper front left,.
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2310-0-200-0310 and 2310-0-550-0194
 
Price  
    request
125460776 210

WEINIG Unicontrol 12 CNC - Video - for sale
Window production centre


Tenoning spindle: 2 St.Number of milling agregates: 10 St.Spindle diameter: 50 mm! MACHINE CAN BE INSPECTED DURING PRODUCTION Machine for sale in customer orders !# 6192 Weinig Unicontrol 12 CNC, with 2 tenoning spindle ...

 
Tenoning spindle: 2 St.
Number of milling agregates: 10 St.
Spindle diameter: 50 mm
! MACHINE CAN BE INSPECTED DURING PRODUCTION !

! Machine for sale in customer orders !

# 6192 Weinig Unicontrol 12 CNC, with 2 tenoning spindles and Vario table
..

Specifications Summary
(Possibly more included equpment please inquire)
..


Cut-off saw
..
cut-off saw electronically, horizontally adjustable: NC axis
Number of tools: 1 pcs.
Spindle speed: 3000-6000 r / min
Spindle diameter: 40 mm
Tool clamping length: 13 mm
Tool diameter max .: 400 mm
Motor power: 3 kW
Alignment laser for detecting the cut
Displacement axial: NC-axis integrated into control
Displacement axial: 150 mm

Aggregate for edge rounding of the bottom
..
Axial adjustment along with Ablängsäge
Spindle speed: 9000 U / min
Spindle diameter: 20 mm
Tool clamping length: 25 mm
Tool diameter max .: 130 mm
Motor power: 3 kW

Length stop CNC controlled
..
Length 3500 mm
Incl. Positioned cut-off saw integrated into control

1st tenoning spindle
..
Number of tools: variable, CNC-axis
Spindle length: 640 mm
Spindle stroke vertical: variable, CNC-axis
Spindle speed: 2800 U / min
Spindle diameter: 50 mm
Tool diameter max .: 380 mm
Engine power: 15 kW
With hydraulic tensioned outboard bearing
Complete counterprofile: Complete spindle length is countered


2. tenoning spindle
..
Number of tools: variable, CNC-axis
Spindle length: 640 mm
Spindle stroke vertical: variable, CNC-axis
Spindle speed: 2800 U / min
Spindle diameter: 50 mm
Tool diameter max .: 380 mm
Engine power: 15 kW
With hydraulic tensioned outboard bearing
Complete counterprofile: Complete spindle length is countered


Vario table with horizontal NC-axis


1. profiling spindle
..
Position: Right
Number of tools: variable, CNC-axis
Spindle length: 400 mm with counter bearing
Spindle stroke vertical: variable, CNC-axis
Spindle horizontal: variable, CNC-axis
Spindle speed: 7000 U / min
Spindle diameter: 50 mm
Tooling circle max .: 232 mm
Engine power: 11 kW
Radial adjustment: CNC axis
Axial adjustment: CNC axis

2. profiling spindle
..
Position: Right
Number of tools: variable, CNC-axis
Spindle length: 400 mm with counter bearing
Spindle stroke vertical: variable, CNC-axis
Spindle horizontal: variable, CNC-axis
Spindle speed: 7000 U / min
Spindle diameter: 50 mm
Tooling circle max .: 232 mm
Engine power: 11 kW
Radial adjustment: CNC axis
Axial adjustment: CNC axis

Grooving aggregate from above - before the final profile spindle
..
Position: horizontal top
Spindle speed: 9000 U / min
Spindle diameter: 40 mm
Spindle length: 40 mm
Engine power: 3.7 kW
Displacement axial: 30mm
Displacement radial: 125 mm
Radial clock to 8 positions by pneumatic gun
Axial adjustment with NC-axis


3. profiling spindle
..
Position: Right
Number of tools: variable, CNC-axis
Spindle length: 400 mm with counter bearing
Spindle stroke vertical: variable, CNC-axis
Spindle horizontal: variable, CNC-axis
Spindle speed: 6000 U / min
Spindle diameter: 50 mm
Tooling circle max .: 232 mm
Engine power: 11 kW
Radial adjustment: CNC axis
Axial adjustment: CNC axis


Profiling spindle - fitting spindle - at the machine end
..
Position: vertical right up
Spindle length: 160 mm
Spindle speed: 5850 U / min
Spindle diameter: 40 mm
Tooling circle max .: 210 mm
Engine power: 3.7 kW
Displacement axial: 115 mm
Displacement radial: 100 mm
Radial adjustment: CNC axis
Axial adjustment: CNC axis

grooving aggregate from top - in addition stand
..
Position: vertical right
Spindle length: 40 mm
Spindle speed: 5850 U / min
Spindle diameter: 40 mm
Tooling circle max .: 180 mm
Motor power: 3 kW
Displacement axial: 100 mm
Displacement radial: 80 mm
Radial clocked to 8 positions by pneumatic gun
Axial clocked to 8 positions by pneumatic gun

Grooving aggregate from bottom side - in addition stand
..
Position: horizontal bottom
Spindle length: 125 mm
Spindle speed: 5850 U / min
Spindle diameter: 40 mm
Tooling circle max .: 200 mm
Motor power: 3 kW
Displacement axial: 100 mm
Displacement radial: 100 mm
Radial adjustment infinitely variable NC axis
Axial clocked to 8 positions by pneumatic gun


Other features
..

Online-capable
equipment for stormproofing of already pressed sashes.
That means on the machine you can do the outside profiles on single pieces or
in pressed condition
Double piece package
Return conveyor for 1-man operation: turning system with collet
Studio window equipment
Electronic angle display for angular windows
Control: PC-Nexus
NC-axis for feed height adjustment
2 axially clocked feed rollers opposite profile spindle for manufacturing
narrow and short parts
Rung leadership and shoot Supports bar
pressure lineal from side is divided in sections
Automatic central lubrication
Vario table with horizontal NC-axis


Option:
used Oertli tools in different systems for single part production (that means
customer did the outide profile of the sahes on the single piece)


techn. details according to manufacturer - without guarantee!



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125465328 2479

PKW M1) Ford Bus Vario FT330 85 for sale


last off Code: BH-66701 Matriculation year: 24.01.2007 elapsed. Mileage: 135.903 km Power: 85 kW Displacement: 2.402 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a,  ...

 
last off Code: BH-66701
Matriculation year: 24.01.2007
elapsed. Mileage: 135.903 km
Power: 85 kW
Displacement: 2.402 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: FDC6TRANSIT/TURNEO/JXFA2B/D9CCA
FIN: WF0SXXTTFS6G34663
Equity / total weight: 2,044/3,330 kg
Color: Blue
Body: Sedan
Number of seats: 9
Equipment: 6-speed manual transmission, radio, Electr. Window regulator front
Documentation: types of licence available
Key: 1
Comments to the State: oil leak at crank shaft sealing ring, injector leaking, div. Anrostungen on all axle parts, brake discs and pads are 1 cylinder renewed, is steering leak, various rusty Anrostungen on main and auxiliary frame, springs and shock absorbers,. Passenger seat cover, expanded storage space, manufacturer emblems bleached out, gall at hood, rust spots on steel rims,.
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
Asset number: 2310-41-000-3765 und2310-0-550-0283
 
Price  
    request
125460780 206

S+S Super for sale
Frame press


Working width: 4500 mmWorking height: 2500 mmNumber of cylinders: 6 St.Dimensions (L/W/H): 6.400 x 1.850 x 3.650 mmWeight: 3.500 kgElectrohydraulic frame presser S + S Superwith automatic adjustmentCE versionFrame press  ...

 
Working width: 4500 mm
Working height: 2500 mm
Number of cylinders: 6 St.
Dimensions (L/W/H): 6.400 x 1.850 x 3.650 mm
Weight: 3.500 kg
Electrohydraulic frame presser S + S Super
with automatic adjustment

CE version

Frame press machine with 2 pieces movable presses, complete with 8 pieces
Holding cylinder for fixing frame parts, as well as with motor protection and
Control circuit breaker.

Size adjustment by optical length detection for height and width.

Working length x width: 4500 x 2500 mm

Rotating beam light curtain OTD 3

Medium pressure bar with automatic adjustment in height
up to 2500 mm high

Single pressure control for medium pressure bars

Cross-pressure device for pressing cross-bar window

Single pressure control for cross-pressure device

A triangle studio window crimping apparatus comprising:

Locking device of the vertical pressure beam
-3 push-on side-mounted pendulum pressure plates and regulators,
Central drive with single, pneumatic decoupling of the
Vertical pressure cylinder
(thereby independent of each other is the setting in any
Working height)


electrical hand control

Double pendulum plate

2 pendulum printing plates with extension (for triangular window triangle)


(Techn. Description according to manufacturer - without guarantee!)



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125465323 2422

LKW N3) ÖAF Gräf & Stift 19-281 F for sale


last off Code: BH-83589 Matriculation year: 19.10.1988 elapsed. Mileage: 105.118 km : KW 206 Displacement: 11,413 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, aut ...

 
last off Code: BH-83589
Matriculation year: 19.10.1988
elapsed. Mileage: 105.118 km
: KW 206
Displacement: 11,413 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: VAO505A278F004826
Equity / total weight: 9.930/18,000 kg
Color: grey
Construction: Open box
Number of seats: 3
Equipment: Gearbox, fitted tarp, rear
Documentation: types of licence available
Key: 1
Comments on the condition: engine oil and fuel loss, cold start Device defective, strong noise, probably massive gearbox bearing failure, stabilizer of defective rear wheel hub left front leak, air pressure er performance poorly, rusted frame , Spring cushion and Sling have game, div. differences in colour varnish, sticker residue, prov. Repainting, abrasions all around vehicle, abrasions at front bumper, div. Rust all around vehicle,
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-400-0046
 
Price  
    request
125460507 105

FELDER KF 700 S for sale
Sliding Saw/Milling Machine


Weight approx.: 1450 kgDimensions (l x w x h) approx.: 3200 x 1600 x 1200 mmDescription: Milling cutter 4 speeds 3,500 / 6,500 / 8,000 u.10,000, rpm Milling machine right / left rotation, spindle 30 mm, milling stop 240  ...
used machine
 
Weight approx.: 1450 kg
Dimensions (l x w x h) approx.: 3200 x 1600 x 1200 mm
Description: Milling cutter 4 speeds 3,500 / 6,500 / 8,000 u.10,000, rpm Milling machine right / left rotation, spindle 30 mm, milling stop 240 for tools Ø max. Saw swiveling 90 - 45 °. Circular saw stop with digital display, cutting width 800 mm. Saw blade Ø approx. 320 mm, scorer, carriage length approx. 3200 mm, 3-roller feeder F38, incl. Accessories
2008
used machinery auction RESALE 950 €  
  CH   request
125465317 2486

PKW M1) VW Golf for sale


last off Code: BH-67262 Matriculation year: 15.12.2008 elapsed. Mileage: 264.010 km Power: 77 kW Displacement: 1.896 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a,  ...

 
last off Code: BH-67262
Matriculation year: 15.12.2008
elapsed. Mileage: 264.010 km
Power: 77 kW
Displacement: 1.896 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: 1KM / ACBLSX0/FM5FM5A4009N7GGN1
FIN: WVWZZZ1KZ9M289084
Equity / total weight: 1.361/1,990 kg
Color: Blue
Body: hatchback
Equipment: material facilities, 5-speed manual transmission, Electr. Power Windows front and rear, trip computer, air conditioning, roof rails colour: black
Tyres: tyres 2 x
Documentation: types of licence available
Key: 1
Comments to the State: scratches and rust spots at hood, paint damage on front bumper right front, abrasions wheel box left rear;
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
Asset number: 2310-12-384-6284 and 2310-41-000-8564
 
Price  
    request
125460508 205

FORMAT 4 profit H350 16.50 for sale
5-Axis Machining Centre


Weight approx.: 9000 kgDimensions (l x w x h) approx.: 8590 x 4060 x 2600 mmsoftware: Woodflash working length x-axis: 5000 mmworking width y-axis: 1500 mmworking height y-axis: 150 mmmain spindle: 12 kWtool changer: 18- ...
used machine
 
Weight approx.: 9000 kg
Dimensions (l x w x h) approx.: 8590 x 4060 x 2600 mm
software: Woodflash
working length x-axis: 5000 mm
working width y-axis: 1500 mm
working height y-axis: 150 mm
main spindle: 12 kW
tool changer: 18-fach / 18-fold + 10-fach / 10-fold
vacuum pump: 90/108 cbm/h
drilling head vertical x-axis: 7 piece
drilling head vertical y-axis: 5 piece
drilling head horizontal x-axis: 4 piece
drilling head horizontal y-axis: 2 piece
saw unit: ja / yes in X
changing unit: ja / yes
edge gluing unit: nein / no
travelling way X-axis: 6000 mm
travelling way Y-axis: 1970 mm
travelling way Z-axis: 455 mm
Description: A young gantry-style CNC machining center with double-sided digital driving portal.

5-axis gimbal electric spindle 12 kW (S6) HSK F63, 24,000 rpm
Automatic central lubrication

Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in Y-direction.
Horizontal 6 spindles:
4 spindles in the X direction and 2 spindles in Y-direction.
Forward stroke = 70 mm, max. Drill length = 70 mm and shank D = 10 mm.
All spindles are individually driven and available.
1 grooving saw - in X- Direction:
Max. Saw blade diameter 120 mm, max. Blade thickness 5 mm, max. number of revolutions infinitely variable up to 7500 rpm.

8 workpiece supports:
with front and rear stop row. Vacuum dual-circuit system with Suction cup height 100 mm.

Positioning display of the workpiece supports and vacuum cups in the CNC board.
The exact position of the vacuum cups on the workpiece supports is indicated by laser.

Hand-held terminal for controlling the axle speed incl. Emergency stop switch

Safety system with photocell on the front

18-fold plate changer traveling in X:
Max. Tool diameter 250 mm
Max. Tool length 280 mm

automatic tool length measuring system
2017
used machinery auction RESALE 27,500 €  
  CH   request
125465313 301

SUMITOMO JAPAN ( ELECTIRC SE130EV-C360HP for sale
Injection molding machines


WE HAVE SUMITOMO FULL ELECTRIC 130TON AS FOLLOWS INFORMATION. 1. MODEL: SE130EV-C360HP 2. Q'TY: 2 UNITS ( ONLY MACHINE ) 3. MFG.YEAR 2013 APR. 4. SCREW DIA. 25MM 5. ORIGINAL MACHINE NAME PLATE. PLS. CONTACT GJCHOI  ...
used machine
 
WE HAVE SUMITOMO FULL ELECTRIC 130TON AS FOLLOWS INFORMATION.
1. MODEL: SE130EV-C360HP
2. Q'TY: 2 UNITS ( ONLY MACHINE )
3. MFG.YEAR 2013 APR.
4. SCREW DIA. 25MM
5. ORIGINAL MACHINE NAME PLATE.
PLS. CONTACT GJCHOI OF GNB IN KOREA
2013
Price  
  KR   request
125460527 103

Machine Vice and Dividing Head


Weight approx.: 120 kgDimensions (l x w x h) approx.: 1200 x 800 x 400 mmDescription: Machine vice jaw width 200 mm, with replacement jaws, dividing head with 3-jaw chuck, diameter 250 mm, various pitch circle discs, see ...

 
Weight approx.: 120 kg
Dimensions (l x w x h) approx.: 1200 x 800 x 400 mm
Description: Machine vice jaw width 200 mm, with replacement jaws, dividing head with 3-jaw chuck, diameter 250 mm, various pitch circle discs, see photos for details
 
used machinery auction RESALE 85 €  
  DE   request
125465310 901

ZUGMASCHINE T1) Steyr Daimler Puch 760 a for sale


last off Code: BH-80088 First registration: 18.12.1979 elapsed. Hours of operation: 4.208 h Output: 44 kW Displacement: 1,140 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to Â&se ...

 
last off Code: BH-80088
First registration: 18.12.1979
elapsed. Hours of operation: 4.208 h
Output: 44 kW
Displacement: 1,140 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: 295.05-3685
Equity / total weight: 2,517/4,500 kg
Color: grey
Facilities: with headlamps above installed, safety signal lamp
Tyres: Max. Axle load front 1,750 kg, allowed axle load rear 2.300 kg, documentation: licence of types of available key: 1
Comments to the State: motor does not start, gearbox is leaking, axes are leaking, corrosion game on the steering linkage and steering column, have strong bearing clearance at rear axle, brake lines and hoses partly rusted and cracked, Total failure cable fire, batteries, frame has some significant corrosion damage, hydraulic system results in oil loss, paint largely bleached out, div. Rust all around vehicle, abrasions, and dents all around vehicle, rust spots on wheels,
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2420-0-350-0014 and 2420-0-550-0005
 
Price  
    request
125460579 104

GISAG TGL 24500 for sale
Double Grinder Bench


Weight approx.: 400 kgDimensions (l x w x h) approx.: 1000 x 900 x 1400 mmDescription: Grinding disc diameter max. 320 mm, discs circumferential speed only up to 45 m/s, see photos for details
used machine
 
Weight approx.: 400 kg
Dimensions (l x w x h) approx.: 1000 x 900 x 1400 mm
Description: Grinding disc diameter max. 320 mm, discs circumferential speed only up to 45 m/s, see photos for details
1979
used machinery auction RESALE 105 €  
  DE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More RC models (2 or more machines):
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Casting press URPEMAK URPE CC 50


Injection molding machine for aluminium URPEMAK URPE CC 50 built in 2005 the year in Spain. Foundry machine URPE URPEMAK CC 50-parameters: -clamping force: 500 kN -Road: 260 mm -the strength of the ejector: 62.8 kN -ejector stroke: 50 mm -height (min-max): 100/325 mm -dimensions: 500 x 500 mm -distance between columns: 320 x 290 mm -diameter: 60 mm -the position of the injection: 0-50 mm -the maximum force-cast: 50 kN -diameter of piston injection: 45-50-55 mm -feed cast: 140 mm -the surface of the casting: 159-196-238 cm2 the mass/volume of injection: 91-140-188 cm3 -injection pressure: 314-254-210 daN/cm2 -the feed piston: 150 mm -motor: 11 kW -weight: 4900 kg -dimensions: ok. 407 x 225 x 220 cm

Hydraulic Presses WEKO WE 680-2-20


Hydraulic presses WEKO in 680-2-20 was produced in 1997. Technical parameters: -clamping force: ok. 120 t -base form: 46 cm -distance between columns: 67 cm -making a stroke: 70 cm

Casting press URPEMAK URPE CFA 220


Foundry machine URPE URPEMAK CFA 220 produced in 2005 year in Spain. The price of the machine the crucible for melt aluminum, with a capacity of approx. 500 l, visible on the last photo. Injection molding machine for aluminium URPEMAK URPE CFA 220-technical parameters: -clamping force: 2250 kN -Road: 440 mm -the strength of the ejector: 120 kN -ejector stroke: 100 mm -height (min-max): 240/600 mm -dimensions: 780 x 780 mm -distance between columns: 510 x 510 mm -diameter: 90 mm -the position of the injection: 0-90-180 mm -the maximum force-cast: 121-250 kN -piston injection: 40-50-60-70 mm -feed cast: 360 mm -the surface of the casting: 113-714 cm2 the mass/volume of injection: 301-471-678-923 cm3 -injection pressure: 315-1990 daN/cm2 -engine: 20 kW -weight: 13000 kg -dimensions: ok. 590 x 238 x 275 cm

Casting press URPEMAK URPE CFA 330


Injection molding machine for aluminium URPEMAK URPE CFA 330 manufactured in 2008 year in Spain. The price of the machine is the crucible to melt zinc, with a capacity of approx. 400 l, visible on the last photo. Foundry machine URPE URPEMAK CFA 330-technical data: -clamping force: 3300 kN -road closure: 510 mm -the strength of the ejector: 181 kN -ejector stroke: 120 mm -height (min-max): 300/700 mm -dimensions: 910 x 910 mm -distance between columns: 572 x 572 mm -diameter: 115 mm -the position of the injection: 0-80-160 mm -the maximum force-cast: 155-350 kN -piston injection: 50-60-70-80 mm -feed cast: 445 mm -the surface of the casting: 170-1089 cm2 the mass/volume of injection: 655-943-1294-1677 cm3 -injection pressure: 308-1782 daN/cm2 -engine: 33 kW -weight: 16000 kg -machine dimensions: 700 x 270 x 290 cm

Circular press FPA PXW 100 AAb


Press obwiedniowa of varying matrix FPA PXW 100 AAb was built by the factory Automatic Presses Warsaw, Poland-Italy. FPA press-specific data PXW 100 AAb: largest diameter: 100 mm -pressure: 160 T -stroke: 140 mm -the amount of fluctuation matrix: 1500 l/min. -engine power: 17 kW -the engine speed: 3000 l/min. -pump motor power: 11 kW -the engine speed pump drive: 1000 l/min. -the power of pump motor battery: 0.8 kW -the engine speed pump battery: 1500 l/min. -weight of the machine: 53000 kg

horizontal boxer press Euromac Digibend 360


EUROMAC punching Digibend 360 capacity 36 tonnes lengh of stroke 250 mm working speed 10/24-6 mm/sec hight bending 200 mm extra high bending 415 mm oil tank capacity 60 lt aprox 3-phases motor 5.5-4 (hp-kw) table 580 x 1170 mm size 680 x 1170 x 1130 mm weight 900 kg year 2000 CE The data are mechanically translated in the english language. Translation errors are possible. No guarantee for printed date and pricing. • Save up to 100 bend in machine memory. • Bend the guaranteed accurate to +/-0.05mm. • Automated for fast, precise production. • Reduce your set up time. • Adjusting the machine bending pressure or working speed. • Monoblock construction. • Maximum flexibility for bending application (up to 10 tooling) Benefits: • With Euromac punching bending machine, you can change over from one type of tooling to another quickly and easily. • Our bending table is machined from one piece tapered roller steel casting that's guaranteed for 5 year. • Our horizontal acting bending machines give you unlimited bending capabilities, without the risk of damaging your expensive press brake tooling. • Euromac punching bending machine are easy to program, easy to operate, and the cost of production is surprisingly low Well in good conditions of use, which ' can be seen connected and running, by appointment. Specification The RAM force-tonnage (KN) 36 (160) Length of stroke 250 mm Table dimension 1200x580mm Overall dimensions (W x D x H) 1250 x 650 x mm-1140 mm Weight 900 kg

Painting Line AEROTERM ULTRATERM UV 1100


Tunnel AEROTERM ULTRATERM UV 1100 were produced in 2002 year. The tunnel is designed to persist the paints and varnishes. It is equipped with independent air circulation, which holds the spring core at the time of the transition under the lamp. In the tunnels uses dichroic mirrors, filters, quartz and focus the rays, so drying temperature is significantly reduced. Through the use of mirrors and filters can be dry even thin films. Characteristic parameters of the tunnel AEROTERM ULTRATERM UV 1100: -working width: 1100 mm -material thickness: 0.15-50 mm -speed: 5-30 m/min. -the number of hours worked of the filaments: ok. 300 h -lamps: 6 filaments 120 W/cm (the ability to work in 60 in/cm) -fume extraction/ozone -conveyor belt on vacuum table

Hydraulic Press Brake EHT EHPS 20-40


Pressing force: 200t, press length: 4050mm, column width: 3550mm, installation height: 710mm, stroke: 330mm, inlet depth: 350mm, table width: 300mm, table height: 900mm, speed: 9mm/s, length: 7500mm, width: 3800mm, height: 3540mm, weight: 19.8t.

Shredder DOPPSTADT AK-430 PROFI


Motor: MERCEDES BENZ diesel engine OM 501 LA, mallet drum dimensions: 1750x1100mm, rotational speed: 850-1000/min, number of mallets: 36, mallet weight: 14.5kg, max. inlet height: 650mm, outlet conveyor dimensions: 4000x1800mm, conveyor speed: 2.25m/s, ejector height: 3000mm, length: 11630mm, width: 2500mm, height: 3000mm.

Hydraulic Presses PHM 63 PHM 63


Hydraulic presses PHM 63. Characteristic data of the press PHM 63:-force pressing: 63 t -the strength of open: 33 t -stroke: 300 mm -closing speed: 136 mm/s. -Ironing speed: 4.3 mm/s. -opening speed: 122 mm/s. -cylinder bottom przet?ocznik, ejector -the power of przet?oku/discard: 16 t -the strength of return: 10 t -speed of the pumping/discard: 13 mm/s. -the speed of return: 21 mm/s. -the clearance between the tables: 600 mm-dimensions tables: 500 x 500 mm -fixing form/cross-slots for screws: M20 -tank capacity: 150 l/dm3 -measured oil temperature in the tank should not exceed: 45 degrees C -electric motor: 4 kW -maximum pressure: 320 kG/cm2, 32 MPa -low pressure: 25 kG/cm2, 2.5 MPa -supply voltage: 3 x 380/220 V -dimensions (l x w x h): 710 x 1580 x 2200 mm -net weight: 2100 kg

Plasma cutter ECKERT JANTAR 2


Plasma cutter ECKERT JANTAR 2 was built in 2008. The basic technical data cutting ECKERT JANTAR 2:-working width with 2 suportach burners: 2000 mm -cutting length: 6000 mm -the length of the road: 5000 mm -passage speed: 0-20000 mm/min. -cutting thickness (with one burner HARRIS): 100 mm -the type of flammable gas: propane, acetylene, APACHI, natural gas -format programming: ESSI -positioning accuracy: 0.05 mm -supply voltage: 50 Hz/230V/+-5% Part of the basic equipment cutting device JANTAR-2 includes: -computer control system CNC ECS 859:1 PCs. -torch cutting nozzles HARRIS: set of 3/palnik -Central gas Splitter: 1 PCs. -beam portal with guides on the gas hoses and electric cables: 1 set. -the longitudinal rails made of roadway (2000 mm cutting workspace): 1 set. -drive unit wzd?u?my (double-sided): 1 set. -drive unit: 1 set.

Injection molding machines Krauss Maffei 650-3000-2300 BZ


OVERVIEW: Brand: Krauss Maffei Model: 650-3000-2300 BZ Application type: Injection Moulding Machine type: Injection Moulding Machine Availability: Immediately Construction year: 1996 Production hours: 23471 Location: Germany Origin country: Germany GENERAL DATA: Measurements width: 11000 mm Measurements depth: 2800 mm Measurements height: 4600 mm Machine weight: 45000 kg CONTOL UNIT: Brand: Krauss Maffei Model: MC4 INJECTION UNIT: Stroke volume: 1096/2411 cm³ Injection pressure: 1254 bar Screw diameter: 100/70 mm CLAMPING UNIT: Clamping force: 6500 kN Opening stroke: 1750 mm Ejector stroke: 250 mm MEDIA: Main electronic connection: 400 V Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - 2x Injection unit 2 - KUKA robot 3 - Turning plate (upon request)

Eccentric Presses TOMA LEN 63C


Eccentric press TOM LEN 63 c was produced in 2012. The machine allows to realize punching, cutting and punching. The press can work with different instruments. It is also possible to full automation of the work by arming its tape dispenser. Technical parameters of the presses LEN 63 C: -clamping force: 63 tons -table size: 800 x 630 mm -the surface of the slider: 450 x 280 mm -outreach: 315 mm -the number of jumps in: 65/130 min. -number of jumping manual work: 45/50 min. -adjust the pitch slider: 10-105 mm -the self-alignment capacity of slider: 70 mm -ground clearance table-slider: 335 mm -the ground clearance between columns: 355 mm -quantity: 2 -engine: 730/1440 min. -engine power: 4/7.5 kW -overall dimensions: 1425 x 1790 x 2550 mm -weight of the machine: 5850 kg Advantages of the press TOM LEN 63 C: -die-cast housing: grey cast iron -the possibility of setting the size of the pitch slider -the possibility of repositioning the slider -pneumatic balancing slider -accurate, extended, self-lubricating guiding slider -eccentric shaft fit rolling rod -molded friction clutch: brake, meeting the requirements of the provisions of safety at work

CNC Bending Machines AMADA RG1030EV3


OVERVIEW: Brand: AMADA Model: RG1030EV3 Application type: Bending Machine type: Bending Machine Availability: Immediately Construction year: 2008 Production hours: 23000 Location: India Country of origin: Japan GENERAL DATA: Measurements width: 2210 mm Measurements depth: 4030 mm Measurements height: 2470 mm Machine weight: 6400 kg MAIN DRIVE: Pressing force: 100 kN Bending length: 3100 mm Crowning available: CNC Daylight: 100 mm Throat: 400 mm Main motor power: 7.5 HP CONTROL UNIT: Brand: AMADA Model: NC9 Release: AMNCEv3 MOVEMENT: Backgauge-Z: 450 mm MEDIA: Main electronic connection: 400 V Power consumption: 10 kVA Air pressure: 5 bar Oil tank: 65 L

Heavy Lathes POREBA TCA 160


Heavy lathe POREBA TCA 160 was produced in 1959 by the famous Polish FUM POREBA. Technical data of lathe POREBA TCA 160: Scope of work:-height of tusks: 800 mm -maximum turning diameter over bed: 1600 mm -maximum turning diameter over support: 1300 mm -eyepiece: fi 800 mm -maximum turning diameter in the pó?okularze: 250 mm -maximum turning length: 6000 mm -maximum weight of workpiece between centers in: 16000 kG -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 30 mm2 -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 50 mm2 -permissible force on the knife: 6000 kG -the maximum torque at the spindle: 630000 kg.cm -the maximum cross section 70 x 70 mm knife: Cap Headstock: -number of spindle speeds: 24 n -the exponent of the speed: 1.25 -spindle speed range: 1,12-224 RPM., 1,12-224 r/min, 0.85-170 RPM. -front spindle neck diameter: 260 mm -slot in the spindle of the cone metric: # 120 -reducing Bush metric cone Tip: # 120/80 -spindle bore diameter: 105 mm -diameter of the blade Cap: 1600 mm Suport, feeds the normal: -20 longitudinal feed range: 0,19-5,0 mm/Rev. -20 transverse feed range: 0,095-2.5 mm/Rev. -20 feed on the upper tray of the range: 0,095-2.5 mm/Rev. Suport, feeds 8-20 longitudinal feed range: 1.5-40 mm/Rev. -20 transverse feed range: 0.75-20.0 mm/Rev. -20 feed on the upper tray of the range: 0.75-20.0 mm/Rev. Suport, feeds minute:-20 longitudinal feed range: 12-320 mm/Rev. -20 transverse feed range: 6-160 mm/Rev. -20 feed on the upper tray with a range: 6-160 mm/Rev. Suport, feeds to thread (the main screws. train.):-35 thread jumping metrycz. about t. : 1-50 mm -jumping 35 inch threads range: 24-1/2 scroll/inch Suport, feeds for threading on the top tray:-25 thread jumping metrycz. about t. 0.25-7 mm -jumping 35 inch threads/inch scroll: the scroll 28-3/inch Feed rates associated to the rolling cones of gradients creating: 1:1.5 (d) 1:1000 -rapid traverse: 4000 mm/min. Konik: -barrel diameter: 200 mm -stroke sleeve: 600 mm -slot in the spindle sto?. meter.: # 80 -radial offset: +-30 mm Glasses: -diameter adjustment range normal: 200-600, 200-500 equipment, okular, 300-800 mm -adjustment range of diameters okular special equipment: 30-300, 50-400, 200-500 mm Pó?okular: -adjustment range pó?okulara diameter: 50-250 mm Drive:-main motor power: 40 kW -the engine speed: 750 RPM. -rapid feed motor power: 2.2 kW -the engine speed rapid feed rate: 3000 rpm. -oil pump motor power: 0.37 kW -engine oil pump: 1500 rpm. -performance oil pump: 25 l/min. Sizes and weights: -distance between centres: 3000-15000 mm -weight for length 6000 mm and 1 support: ok. 30000 kg -extra weight Prov difference length 1000 mm: 1200 kg -the weight of the additional bracket: 1500 kg

Concrete paving stone production line HENKE HERMETIK SILENTA SADP 50/300/6


Line for the production of paving tiles from the concrete HENKE HERMETIK SILENTA SADP 50/300/6 was produced in 1982. Line-specific data HENKE HERMETIK SADP SILENTA 50/300/6: -performance line: 800 PCs./day-line mode: semi-manufactured items: 2-ply line has molds for the production of tiles in size:-40 x 40 cm-50 x 50 cm-40 x 60 cm-50 x 25 cm The line includes:-Control Panel-set of forms-production-safe metal-Kit metal and rubber, 3 designs -the receiving machine, plate type HERCULES

Circular knives, grooved Knives Dienes CV1 213021016


5x NG eccentric ring fixings from Dienes. Never used in original package. We ship worldwide.

CNC Plasma Cutting Machines MACCHINA TAGLIO PLASMA REDCOM


REDCOM PLASMA CUTTING MACHINE MAKE MODEL YEAR 2008 Redcom EVL 25 18 Modular double Plasma cutting torch, with stock drilling tools. Measurements: 18 x 2.5 mt Hypertherm HPR260 HSD130 models with torches and Generator CNC ESA/GV Datasheet available in the documents section For more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

FORNO PER FUSIONE Marconi


MELTING FURNACE MARCONI 14 RR MODEL YEAR 1999 Marconi BRAND Melting furnace Marconi; automatic metal loader hydraulic controls; capacity 1400 kg; Double burner; wait 1 and 1; 2 wells; side discharge and cleaning; gas powered for more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

FORNO PER FUSIONE Marconi


ALUMINUM MELTING FURNACE BRAND Marconi MODEL RR14 1680/00 YEAR 2000 Technical Data: Kcal/hour 280000 Temp. Max 999 C° Gas supply For more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

Circular Saws KALTENBACH KKS 400 NA


Circular Saw KALTENBACH tpye KKS 400 NA Year of construction 1997 Blades dimensions Ø 400 mm Working range: round:130 mm - square: 180 mm - flat: 305 x 20 mm Automatic feeding max length 1000 mm

Roll Bending Machines LAGAN PRESS AB APT M80BMOH


Rozwijak for sheet metal LAGAN PRESS AB APT M80BMOH produced in 1994. Technical specifications rozwijaka LAGAN PRESS AB APT M8OBMOH: -the maximum width of the circle: 1000 mm -maximum weight of circle: 10000 kg -the maximum diameter of the circle: 450/550 mm-motor: 380 V

Hot forging press ERFURT PKXW 1600.3


Force: 1600 ton Strokes per minute: 90 Stroke: 280 mm Adjustment: 16 mm Shut height: 1000 mm Table: 1250x1250 mm Weight: 120 ton

Abcd Machinery 2015


VECTRA 150 Hydropneumatic corner crimping machine suitable to every kind of aluminium profile. Maximum crimping height: 150mm Pressing force 3,5 t (35 kN) STANDARD EQUIPMENT Frame support arm set Couple of standard crimping tools 3mm Couple of standard crimping tools 5mm Couple of standard crimping tools 7mm Foot pedal Pneumatic clamping set 1x profile backing block 20mm 1x profile backing block 30mm MACHINE IS NOT USED. JUST SHOWED AT THE EXHIBITIONS. PERFECT CONDITIONS LIKE A NEW

Circular Sawing Automatics Abcd Machinery AUTOCUT550


AUTOCUT 550 Automatic sawing machine with automatic feeding for cutting at 90°. Equipped with automatic feeding system fitted with Brushless moter driven by numerical control “touch screen”. Bar-end detection device. Clamping of the bar by “bridge” system. Possibility to load and save cutting lists in CSV format with USB and ETHERNET connectivity. Spray mist lubrication (Venturi). Threephase motor 5,5KW.

Circular Sawing Automatics Elumatec SA73


Automatic saw SA 73/36 Description Suitable for high-volume cutting of aluminium profiles for window manufacturing and industrial applications Material infeed (cycling) protects the surface of the workpiece by means of a single-stage profile lifting system One, two or three-stroke feed can be selected using a selector switch Reliable material feed using two horizontal clamping cylinders Automatic machine shut-down at the end of the profile Pulsed coolant system Equipped with saw blade as standard Technical specifications Cutting range 150 x 110 mm Saw blade diameter 380 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW Compressed air supply 7 bar Air consumption per working cycle 19 l without spraying, 31 l with spraying Length 1,500 mm, depth 1,100 mm, height 1,550 mm, weight 290 kg Feed distance per cycle 5 – 250 mm (up to three cycles possible)

Monarch-Scalvos Protti good models excellent conditio


MAJOR TEXTILE Knitting PLANT LIQUIDATION (Please your intrest with confirmed target price immedaitely) KNITTING 12 Monarch FIL 8AEQ, 30", 4-18 cut, 8-24 cut, 84 feed 2 Monarch FIL 8AEQ, 30", 18 cut, 84 feed, 50 % lycra 10 Monarch FIM 108A, 30", 24 cut, 108 feed 1 Monarch FDR Rib, 26", 14 cut, 52 feed 3 Monarch Rib, 26", 14 cut, 52 feed, Lycra 1 Monarch Rib, 20", 14 cut, 40 feed 1 Monarch SEC Electronic Striper, 30", 16 cut, 36 feed 6 Monarch FXC4S, 30', 20 cut, 122 feed 4 Monarch RACE, 30", 28 cut, 122 cut 1 Monarch STEP JACK, 30", 20 cut, 72 feed 14 Monarch RXDF, 30", 122 feed, 3-24 cut, 6-22 cut, 5-18 cut, 24 Monarch RX4S, 26", 104 fd, 2-28 cut, 4-24 cut, 9-18 cut, 9-22 cut, 7 Monarch FXC 4S, 26", 20 cut, 104 fd. 6 Monarch RX4S, 26", 20 cut, 104 fd. 8 Monarch RX WSY Striper, 30", 48 feed, 5-16 cut, 1-18 cut, 1-28 cut FLAT KNITTING 2 Protti PV94 Doublelock, 240 cm, 12 gauge 6 Protti PT222, 213 cm, 12 cut 9 Protti PT242 Jacquard, 218 cm, 12 cut 35 Stoll JBOMB, 150 cm, 160 cm & 180 cm, 12 gauge DYEING 1 Gaston Jet Dye, 80 lb., 1996, M6000 Controller 4 Sclavos Jet Dye, Venus HT3, 3 port, 1000 lbs., 50 PSI, 1999, updated Recore controls, 2014-15 3 Gaston Futura, 2 port, 1000 lbs., 53 psi, Barco controls, 1987 1 Gaston Futura Jet Dye, single tube, 160 lbs,, 1992, M3000 controller 4 Recore Dye Machine Controllers, 2012-14 6 Then Airflow, 1200 lbs., 3 strand/3 ports, 1988 1 Then Airflow, 400 lbs., 1 port, 1987 3 Arganthan Jet Dye, 80 lbs. each, 60 PSI, 1982-80 1 Arganthan Jet Dye, 400 lbs., 60 PSI, 1982 11 Arganthan Jet Dye, 4 ports, 1000 lbs., 60 PSI, 1980 7 Gaston 824 Jet Dye, 5-3 port, 2-2 port 200 Stainless Mixing Tanks with mixers, 50 to 250 gal. 200 Dyehouse Trucks, 72" x 42" wide x 35" dp. FINISHING 1 Santex Santastrech Plus 120, 48" wide, 120 cm, balloon extractor, 5 to 60 YPM, 1994 1 Santex SANTASHRINK Dryer, 220 cm wide, with pin tenter entry, 1994, 6K/220 Gas IR SRS + SPR+FOUL+CUT, gas fired, 6 chambers, 2400 lbs./hour evaporation capacity, 6.1 mil BTU/HR 1 TubeTex Dryer #6 gas fired drum, entry with 3- Fabcon Padders 1 Bianco Slitter, 86" wide, Bianco slitter head (updated 2015), rope squeeze, detwister, folder, stainless steel 1 Bianco Slitter, 86" wide, opener and detwister, 2 scrolled rolls, flat folder 1 Stentex Tenter Stentotherm 3300, 1995, 2400 mm max. working width, unwind, J box, Dogal uncurler, 2 Santex Padders, 102" wide, Bianco Weft Straightner, E & L guiders, low profile gas fired 12 zones, 1 Krantz Syncro Shrink Conveyor Dryer, 100" wide belt 2 Famatex Tenter #1 & #2 3 Tube Tex Drum Dryers, 48" wide & 72" wide 1 Fabcon Drum Dryer, 8 zone 5 Tubular Inspection machines 6 6 Fabcon Tubular Gullwing Tubular Compactors, 52" wide Fabcon & Tubetex Tubular Calendars, 50" & 60" wide 1 Argathen Bleach Range, 10 section, 2200 lbs. hour. 1 Jemco Bleach Range, Model III 2000 CBR, 2,000 lbs. hour, 1995 1 Curtis & Marble, plastic roll wrapping 1 Bespoke Dye Mixing System, Year 2000, 16 pumps, 2 Model SRD Exact Weigh liquid chemical collecting, mixing, batch weighing, 2 IR dual head centrifugal pump, Mettler intergrated scale 1 Tube Tex, drum dryer 1999, with 3 Tube Tex tubular padders 1 1 Monforts Knitgoods Toptex 92" wide, open width rubber belt compactor, Kombi Batcher, steam heated main cylinder, 1990 Fabcon Open Pin Tenter, 90" wide x 20' long, steaming section, batcher 1 LABORATORY: Raitech Quickwash, DataColor 500, Milnor Washer, Huebsch Dryer 50 lb., PLUS MANY MORE ITEMS 25 Merrow Sewing Machines, with table and motor 2 Gardner Denver Air Compressor, 60 HP 1 Gardner Denver Air Compressor, 200 HP 3 Ingersoll-Rand Screw Compressor, 2- 250 HP, 1-150 HP 3 Propane Storage Tanks, 30,000 gallon, with mixer 4 Stainless Steel Outside Tanks, 6000 gal to 10,000 gal. 3 Waste Balers, vertical style 2 Cleaver Brooks Package Boilers, 800 HP, 1988 + 1989, dearator system PLEASE CONTACT US FOR FURTHER INFORMATION .

Gas generators Caterpillar 3520


2055 KW Caterpillar 3520 Gas Generator in Super Insulated Enclosures Eight (8) 2055 KW Caterpillar G3520 Natural Gas Generators in Super Insulated Arctic Enclosures, 2055 KW Caterpillar 3520 natural gas engines with KATO Generators, 2671hp, 60 Hz, 13.8 KV, 1800 rpm, 60 HZ, 0.7PF. year 2009, Hours range 1300 to 2600 since new. Each generator package has its own Super Insulated Arctic Enclosure and designed to operate in severe cold conditions. Mufflers, Batteries, Battery Chargers, Oil Heaters, Prelube System, Water Pumps, Woodward Governor, panels, ABB Medium Voltage Switch Gear and Allan Bradley Motor Control Center and much more. Lots of equipment included with this package. Fast set up to generate immediate power. Excellent Condition, Great Buy on this Complete Package.

Forno Marconi


Aluminum melting furnace Marconi Brand: Marconi Model: 1680/00 AR14 Year: 2000 Technical Data: -280000 Kcal/hour -Temp. Max 999 C° -Gas supply For more information and machinery vision contact us at + 39 030 725026 from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

Two-crank press of single action Voronezh KB3534A (250ton)


Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Distance between table and slider, mm 750 Distance between table and slider, mm 750 Main motor power kW 47 Table size width / length mm 1250/2500 Dimensions of the machine Length Width Height (mm) 4555_2900_5855 Weight kg 50100

Sheet-metal-stamping trimming press Voronezh KV2536,400T


Maximum force ton-force 400 Slider stroke length mm 250 Slider stroke length to lower position mm 12 Slider strokes per minute 25 Number of single turn-on 19 Maximum distance between table and slider (in lower position of slider) mm 510 Adjustment mm 160 The sizes of a under-forginig plate mm 1000 Table overall dimensions: mm - from front to rear 1000 - from left to right 1000 The sizes of an aperture in a table mm 630 Slider overall dimensions mm 800 x 800 window dimensions in cheeks mm 600 Total power of electric motors kW 43,3 Press overall dimensions mm - length 3470 - width 3140 - height 5940 Press weight without hydropneumatic pillow kg 31 400

Frozen meat grinders GEA Powergrind 280


The GEA PowerGrind 280 is a powerful industrial grinder for fresh and frozen goods, which minimizes dust and fines, and manages the meat up to-25 ° C. There is less dust and fines, and not suiffage. The great feeding area minimizes the risk of formation of arch and allows loading the machine with up to 10 standard meat blocks (30 kg) of a sudden The machine comes with a reducer in advance, a screw of new grinding, many grills and knives.

Welding Machines KT7 KTP 300-150


Plasma cutter KT7 KTP 300-150 manufactured in 2016. The set includes: plasma source, plotter and screw compressor. Technical Data: -field work: 150 x 300 cm -precision stepper motor-based drives (servo motor) -the structure of the gate running, Y axis -double sided operator coupled mechanically -the application of very rigid and stable frame structure -Y axis: 4.7 NM ratio -X axis: 3.2 NM -Z axis: 3.2 NM -working speed for G0:16000 mm/min. (40000 mm/min-with servo motors) -water table which gives a cleaner cut, cooling and reducing emissions of gases during machining -corrosion protection design of hot galvanizing and specialised polyurethane paints -metal detection -protection system corruption of a burner -torch height control over the sheet of THC -handle antykolizyjny burner -precision ustawoanie punching sheet metal (longer life supplies the burner) -modern desktop operator with 19 "screen and the computer -external USB port that allows you to open files using the pen-drive -high precision cutting does not require further complex machining -software based on Linux-much greater stability than Windows -the total weight of the machine: ok. 800 kg CAM Software: -burning outside the useful edge -external, internal offsets -import files in DXF format -selection of parameters of smoking -software in Polish language SheetCam program to generate common shapes and simple distribution of parts on the sheet Screw compressor-technical data: -power: 5.5 kW -pressure: 8 bar -capacity: 0.85 m3/min. -capacity: 51 m3/h -weight: 340 kg -tank: 500 L -dimensions (l x w x h): 2030 x 650 x 1500 mm

Multideck ovens Real Forni Rotoreal SP Medio


Descriere Marca Real Forni Model SP Medio R ID 7170a Status Activ Pret 7.200 € + TVA An fabricatie 2014 Putere 3 KW Ore de functionare 700 ore Locatie Nova Gorica (SI) Cuptor rotativ patiserie Real Forni Rotoreal, SP Medio R din 2014 pe gaz cu rotor de 3 Kw (Alimentare: 400V, 50Hz). Cat. II2 E3 B/P, gaz (mbar) G20=20, G30/31=30. Arz?tor Riello (putere caloric? 62 000 Kcal/h), greutate aprox. 1500 kg. C?rucior pentru 25 de t?vi (60 x 80) inclus. Panou de control electronic cu 100 de programe ?i 5 viteze de coacere. 2 buc??i disponibile. ExWorks. Pre?ul este negociabil ?i nu include TVA. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Vizionarea produsului se programeaza cu 24 de ore inainte. We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

Transfer Presses ( 2 - 4 Columns) KRUPP PST-A 160


Transfer press KRUPP PST-and 160 built in 1980. Technical data of the press KRUPP PST-and 160: -nominal pressure: 160 tons -cutting force degree 1:400 KN -clamping force between uprights: 1200 KN -the number of stages including the cutting level: 11 -the distance between uprights: 200 mm -pitch slider: 210 mm -drawing depth: 70 mm -the amount of jumping, infinitely adjustable: 15-75/min. -production range jumping from repeatability of its settings: 25-75/min. -number of jumping motion Setup: 15-25/min. -wykorzystywalny resource work per stroke in terms of 25-75 strokes per min.: 20000 J -maximum load single degree: 500 KN -the maximum load of a single degree by using the inserts: 630 KN -the maximum tape width: ok. 340 mm -the maximum cut-out diameter: 120 mm -the minimum cut-out diameter: 30 mm -the distance between uprights: 2450 mm -the height of the built-in tools in the lower position of the slider and its regulations (the space between the table and the imakami of the upper toolbar): 470 mm -the height of the surface transport extrusions over a dining table: 270 mm -height adjustment tool blocks: 40 mm -table clamping surface (width x depth): 2000 x 700 mm -adjustable spacing between the slats podajacymi: 210 +-300 mm -stroke closing slats which indicate for each terminal: 75 mm The progressive press wielooperacyjna KRUPP PST-and 160/11/200/210 is connected and can be checked on the move.

Roland 304 N


ref. 423 Roland 304 N format 52x74 cm, year 1999, perfecting 2-2, all automatic washers, CPL, Rolandmatic, RCI, IR dryer, Technotrans Alpha D, price: 65 000 EUR FCA

Welding Machines ECKERT CNC JANTAR 2


Plasma cutter CNC ECKERT JANTAR 2 was produced in 2010 year. The parameters characteristic of the cutter ECKERT JANTAR 2: -CNC: CNC ECS 872 -Source: Hypertherm HPR130A XD -the number of operating hours: ok. rbh 3590 and 326701m -table surface: 2000 x 3000 mm -range of track (length x width): 4200 x 3000 mm (2 x 3 rectangle designates the torch – this is exactly the movement) -the thickness of the cutting quality: 20 mm for the current 130 and -the thickness of the cutting quality: 12 mm for the current 80 and

CNC Laser Cutting Machines Trumpf TruMatic 3000 fiber (K04)


OVERVIEW: Brand: Trumpf Model: TruMatic 3000 fiber (K04) Application type: Laser Cutting Machine type: Laser Punch Combination Machine Availability: September Construction year: 2011 Production hours: 34000 Laser hours: 33000 Location: Spain MAIN DRIVE: Laser power: 3000 kW Punching force: 165 kN CONTROL UNIT: Brand: Siemens MOVEMENT: X-AXIS: Movement: 2500 mm Y-AXIS: Movement: 1250 mm WORKPIECE: Workpiece weight: 120 kg MAX MATERIAL THICKNESS: Steel: 4 mm ADDITIONAL EQUIPMENT: 1 - MultiTool function 2 - MultiBend function 3 - Thread shaped function 4 - Fast marking / grooving function 5 - Function roller technology and deburring 6 - Additional clamping claw 7 - Repositioning cylinder with moving parts in height 8 - Small parts sensor for ramp evacuation 9 - Mounting on mattress 10 - Chip conveyor with folding tank 11 - Deformed sheet metal detection 12 - Teleservice via and modem 13 - SheetMaster (2500 x 1250) 14 - Off / Load parallel to the main time 15 - Sheet separation system incl. Positioning help for medium format (2500 x 1250) 16 - Suction cup frame 17 - Disp. Load control 18 - GripMaster (2500 x 1250) 19 - SortMaster Pallet (6 transversal Pallets x = 1200 mm, y = 800 mm) 20 - Double trolley load incl. connection with warehouse 21 - 18 RTC cassettes incl. Matrix plate 22 - QuickSet 23 - Conveyor belt parts 24 - TruTops Punch License 25 - Includes € 40,000 in tooling

Laser Cutting Machines Trumpf TruMatic 3000 fiber (K04)


OVERVIEW: Brand: Trumpf Model: TruMatic 3000 fiber (K04) Application type: Laser Cutting Machine type: Laser Punch Combination Machine Availability: September Construction year: 2011 Production hours: 34000 Laser hours: 33000 Location: Spain MAIN DRIVE: Laser power: 3000 kW Punching force: 165 kN CONTROL UNIT: Brand: Siemens MOVEMENT: X-AXIS: Movement: 2500 mm Y-AXIS: Movement: 1250 mm WORKPIECE: Workpiece weight: 120 kg MAX MATERIAL THICKNESS: Steel: 4 mm ADDITIONAL EQUIPMENT: 1 - MultiTool function 2 - MultiBend function 3 - Thread shaped function 4 - Fast marking / grooving function 5 - Function roller technology and deburring 6 - Additional clamping claw 7 - Repositioning cylinder with moving parts in height 8 - Small parts sensor for ramp evacuation 9 - Mounting on mattress 10 - Chip conveyor with folding tank 11 - Deformed sheet metal detection 12 - Teleservice via and modem 13 - SheetMaster (2500 x 1250) 14 - Off / Load parallel to the main time 15 - Sheet separation system incl. Positioning help for medium format (2500 x 1250) 16 - Suction cup frame 17 - Disp. Load control 18 - GripMaster (2500 x 1250) 19 - SortMaster Pallet (6 transversal Pallets x = 1200 mm, y = 800 mm) 20 - Double trolley load incl. connection with warehouse 21 - 18 RTC cassettes incl. Matrix plate 22 - QuickSet 23 - Conveyor belt parts 24 - TruTops Punch License 25 - Includes € 40,000 in tooling

Injection molding machines Engel ES 330H/90V SO-TR


control: EC100 Closing force (t): 90 Mold height min./max.: min 270 Dimensions between posts: 1100 Dimensions of plaque plates Distance. plate: 585 x 340 Worm diameter: 30 Injection volume: 113 Injection pressure: 2180

Rubber injection presses Kloeckner Desma 956.050 ZO


OVERVIEW: Brand: Kloeckner Desma Model: 956.050 ZO Application type: Injection Moulding Machine type: Rubber Injection Presses Availability: Immediately Construction year: 1997 Production hours: 47036 Location: Germany Origin country: Germany GENERAL DATA: Measurements width: 1410 mm Measurements depth: 1520 mm Measurements height: 3200 mm Machine weight: 3000 kg CONTOL UNIT: Brand: DESMA Model: DRC 1000 INJECTION UNIT: Stroke volume: 220 cm³ Injection pressure: 2340 bar CLAMPING UNIT: Clamping force: 500 kN MEDIA: Main electronic connection: 400 V

Rubber injection presses Kloeckner Desma 956.050 ZO


OVERVIEW: Brand: Kloeckner Desma Model: 956.050 ZO Application type: Injection Moulding Machine type: Rubber Injection Presses Availability: Immediately Construction year: 1999 Production hours: 33221 Location: Germany Origin country: Germany GENERAL DATA: Measurements width: 1410 mm Measurements depth: 1520 mm Measurements height: 3200 mm Machine weight: 3100 kg CONTOL UNIT: Brand: DESMA Model: DRC 1000 INJECTION UNIT: Stroke volume: 130 cm³ Injection pressure: 1550 bar CLAMPING UNIT: Clamping force: 500 kN MEDIA: Main electronic connection: 400 V

CNC Bending Presses LVD PPBL 200/30


Press brake LVD PPBL 200/30 manufactured in 2000. The machine allows you to fold items on length 3100 mm with the force 200 tons. Control and control cabinet have been completely upgraded in November 2017 (on work carried a guarantee). Early upgrades carried out the company HARTMANN from Germany. Technical data of the press LVD PPBL 200/30: -pressure capacity: 200 tons -bending length: 3100 mm -distance: 160 mm -maximum pressure: 300 bar -power: 11 kW -machine weight: 11200 kg -menu machine and manual work: in Polish language -a complete wiring diagram

Universal grinding machines KOMMUNAR 3Y131 (3U131)


Universal grinder for shafts and bores KOMMUNAR 3Y131 (3U131) produced in 1977 year in the Soviet Union. The machine is designed for external and internal grinding of cylindrical surface, and the surface of the flat flange, conical shaped. Grinder allows external grinding machines with automatic grinding wheel, on the headland of the table or a hand-fed and sanding with manual feed. Universal 3Y131 Sanders-specific data: -the maximum diameter of workpiece: 280 mm -maximum length of workpiece: 710 mm -the maximum diameter of workpiece in podtrzymce: 60 mm -height of tusks: 185 mm -maximum weight of workpiece: 55 kg -the largest grinding wheel diameter: 600 mm -rotation speed spindle grinding wheel diameter: 600 Prov 1111 Rev/min -the maximum angle of rotation of the spindle head: 30 degrees -the maximum diameter of the cut: 100 mm -maximum length of cut: 125 mm -spindle speed: 16900 RPM. -the size of the sanding spindle head stroke after bolt: 290 mm -time supply fast grinding wheel: 2 s -the size of the feeding speed, spindle head szlifirskiego from hydraulic drive: 50 mm -feed for one turn of the wheel: 0.5 mm -the value of the plot of limbusa feed precision: 0.001 mm -the value of the parcel for the diameter transverse feed limbusa: 0.005 mm -periodic feed grinding spindle head (headland of the table): 0,0025 – 0,025 mm -fast speed adjusting sanding spindle head: 240 mm/min -the amount of speed of rotation of the product: smooth, bezskokowa speed control -speed range: 40-327 RPM -angle of rotation: 0-90 degrees -dimensions of centres: SM4 -the weight of the grinder with accessories: 6200 kg -size grinding machines (at the extreme position of the moving parts): 5620 x 2585 x 1982 mm

Welding Machines ECKERT TOPAZ S 1500


Plasma cutter ECKERT TOPAZ S 1500 built in 2006 year. Technical data cutting machine ECKERT TOPAZ S1500: -CNC control system: CNC MEFI 859 Plasma device: -manufacturer: KIELLBERG kiellberg -model: PA-S25 in -year of production: 2006 Table: -manufacturer: ECKERT -table dimensions: 1500 x 3000 Basic technical data: -number of Heads: 1 -maximum cutting length: 1500 x 3000 -maximum cutting thickness-plasma torch: 12 mm -maximum cutting thickness-oxygen burner: 50 mm

Injection molding machines BMB KW 20 PI/1300


Plastic injection molding machine BMB KW 20 PI/1300 produced in the year 2000 in Italy. Characteristics of injection molding machine BMB 1300/20 PI: -distance between columns: 560 mm-distance between columns in the vertical: 510 mm-max opening stroke: 600 mm -maximum weight of injection: ok. 500 g -screw diameter: 55 mm -clamping forces: 2200 kN

Atrezzature edilizia


Construction equipment and tools for Office including: -Kawasaki OHV Generator -circular saw -concrete mixer glass 230 V brand Officine Bragagnolo – year 2002 -230 V hot water spray gun -Tagliamattoni water tour -Miter saw Stihl -Welding machine -plaster sprayer brand Maltech – year 2002 -milling machine/smoother for plaster -pump for plaster -Alzalastre for plasterboard -printer/copier, Monitor keyboard white -PC complete with monitor, keyboard and mouse, PC tower ... ETC, ETC. -for sale exclusively on next June, 19 hours 10-00 IN via Padana Superiore n° 65, Cazzago San Martino (BS) -For more information contact us at 030 – 7751645 between 9-13, 14-18

CNC Punching Machines AMADA PEGA 357


OVERVIEW: Brand: AMADA Model: PEGA 357 Application type: Punching Machine type: Turret Punching Machine Availability: Immediately Construction year: 1993 Production hours: 48600 Location: India Origin country: Japan GENERAL DATA: Measurements width: 3770 mm Measurements depth: 4931 mm Measurements height: 2315 mm Machine weight: 11600 kg MAIN DRIVE: Punching force: 300 kN Maximum sheet thickness: 4 mm CONTROL UNIT: Brand: AMADAN Model: 04PC Interface: RS232 MOVEMENT: X-AXIS: Movement: 1830 mm Y-AXIS: Movement: 1270 mm MAX MATERIAL THICKNESS: Steel: 4 mm Stainless steel: 2 mm Aluminium: 5 mm TOOLS: No. of stations: 45 Max. tool diameter: 114,3 mm No. of index: 4 MEDIA: Main electronic connection: 400 V / 50 Hz Power consumption: 18 kVA Air pressure: 6 bar Lubrication tank: 1 L Oil tank: 80 L ADDITIONAL EQUIPMENT: 1 - 30x tools 2 - Stabilizer

Injection Moulding Machine ARBURG ALLROUNDER SELECTA 270 S 250-1


Max. injection pressure: 2210bar, screw diameter: 30mm, max. injection weight: 71g, closing force: 273kN, distance between tie bars: 2700x270mm, daylight: 200mm, max. plate distance: 475mm, control: MIRONIC PLUS, operational hours: ca. 90000h.

Injection Moulding Machine KRAUSS MAFFEI 1000-8100 MC


Max. injection pressure: 1778bar, screw diameter: 105mm, max. injection weight: 4137g, closing force: 10000kN, distance between tie bars: 1400x1120mm, daylight: 700-1200mm, max. plate distance: 2400mm, centering diameter: 2500mm, control: MC-4, operational hours: ca. 80000h, including Robot WITTMANN W643-0216: x-travel: 1200mm, y-travel: 2400mm, z-travel: 3500mm, control: CNC6, weight: 740kg.
Find used machinery dealers in your country