1000 offers

maximum number of results exceeded > 1000
please refine your search

New in: 2003
Price: 2.400 €
Location: Land-de DE 40721 Hilden, Neustraße 45
Seller: Achte display system GmbH

WOOD power mobile clean air suction plant RLA 200. Professional clean air extraction systems for wood shavings and wood dust. The RLA 200 clean air suction system is used, but in good condition. -Dust tested according to H2, residual dust content below 0.2 mg / m3 -Filter material from Polystyrine, aluminium coated, washable and thus high service life -Filter by category C-BIA tested & approved -Energy saving (engine power according to the device output) -Rugged, galvanized casing -Mobile thanks swivel casters with brakes Technical details - clean air extraction system - series RLA Type: RLA 200 Article number: 513 2000 Fabrication-No. / year of production: 2003 Nomin ... more

New in: used
Price: 6.500 €
Location: Land-de DE -
Seller: Fritz Brandt Landmaschinenhandel

; Accessories: Bordcomputer / Monitor; Working width [cm]: 2100 more

New in: used
Price: 299 €
Location: Land-de DE 57080 Siegen, Eiserntalstr. 235
Seller: MPS Frank Müller

Potato oven baking potato oven oven potato Weihnachstmarktkartoffel Pickwick A used potato oven by Pickwick's 220 volt The oven will not get hot, so has diminished. We cannot say what is defective, if only one cable is defective or the regulator or something else... We are a wholesale only and carry no repair or diagnosis of such devices; sell the goods as it is. Contact person Mr. Mueller see also our over 200 more deals at. (Changes and errors in the technical data, information and prices and subject to prior sale!) more

New in: 2018
Price: 5.390 €
Location: Land-ch CH Eriswil
Seller: MATEC system+technik GmbH

MATEC-Vibrorinnen from our own development and production running lightly and quietly and transport Schuettguter and individual loads up to 250 kg with minimal energy over long distances up to 12 m at a time with a hand drill 300 w power consumption. The combined forced - and promotion of resonance stores the kinetic energy in the spring and must compensate for only the frictional resistance of the material. Sawdust, metal chips, gravel, Earth, grain, hay and grass, etc. are exactly equal soon transported with approximately 17 m / min. by means of Frequenzumforner the speed can be adjusted. The transport and screening in a single operation with a built-in sieve base perforation on reque ... more

New in: 2007
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Technical data: -maximum working width 3200 mm -maximum thickness at 40 kp / mm² strength 3 mm -Electronically preselected bending angle adjustment 0-180 ° -minimum bending radius approx. 1.25 x plate thickness -smallest internal Board height approx. 6 x plate thickness -biggest opening width / stroke of the upper cheek 300 mm -Adjustable height - the bending flange 80 mm -the lower beam 90 mm -Auto. Tool holder clamp beam and beam -The beam Cambering system - upper cheek drive approx. 400 V / 1,8 kW -Bending beam drive approx. 400 V / 2,6 kW -Space requirement approx. B H 4400 x 1550 X 2350 mm -Weight approx. 4500 kg -CNC program contr ... more

New in: used
Price: used machinery auction RESALE 120 €
Location: Land-de DE Germany, 66914 Waldmohr
Seller: Surplex GmbH

Weight approx.: 150 kg Dimensions (l x w x h) approx.: 2000 x 800 x 1300 mm Description: Platform height approx. 1600 mm, platform length approx. 1750 mm, on chassis more

New in: 2005
Price: request quote
Location: Land-uk UK 0 Gloucester, Walnut Tree Farm
Seller: Prola International Ltd

Make Kiefel Model KMV 75D Year 2005 Delivery Date Immediately Maximum Forming Area 750 x 540 mm Minimum Forming Area 400 x 250 mm Max Tool Dimensions 766 x 556 mm Depth of Draw 150/50 mm Max Sheet Width 810 mm Pressure Forming upto Max 2.5 bar Max Cycles / min 30 Approx Length 12800 mm Approx Width 2600 mm Approx Height 2700 mm Approx Weight 11,000 kg All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale more

New in: used
Price: used machinery auction RESALE 200 €
Location: Land-de DE Germany, 66914 Waldmohr
Seller: Surplex GmbH

Weight approx.: 800 kg Dimensions (l x w x h) approx.: 6000 x 2400 x 1500 mm Description: Mobile steel scaffold, chassis width approx. 1850 mm, aluminium scaffold, extensive accessories (rollers, struts, diagonals) more

New in: 2006
Price: request quote
Location: Land-de DE 27798 Hude, Max-von-Eyth-Str. 23
Seller: Markus Media

The stream delivery SAB Bograma 550 D uses multiple benefit productions. Formats from A3 to minimum 30 x 30 mm can thus be interpreted in the shingled stream. Round belt feeder for optimized products acquisition Powered upper straps with format-independent transport carpet Prefixes and totalizing counter Motor-driven height adjustment Max working width 550 mm Max speed 200 m / min Min. speed 20 m / min more

New in: used
Price: used machinery auction RESALE 400 €
Location: Land-de DE Germany, 66914 Waldmohr
Seller: Surplex GmbH

Weight approx.: 300 kg Dimensions (l x w x h) approx.: 2500 x 800 x 1000 mm Description: 4 Uprights, chassis, transport rollers, 2 platforms length approx. 2100 mm, frame type number 44405 more

New in: used
Price: request quote
Location: Land-nl NL 8531 Lemmer, Kadijk 6
Seller: Valk Machines B.V.

Kraftfomer Eckold, type KF665 Capacity: 6 mm steel 8 mm aluminium 4 mm stainless steel Horizontal projection: 675 mm Vertical projection: 450 mm Stroke adjustment: 80 mm Huzahl: 150/300/600 p/min Equipped with: -Set diving FWA 802/4 -Set routes FWR 803/4 -Foot pedal Country of origin: Switzerland Machine weight: 2.000 kg more

New in: 2017
Price: used machinery auction RESALE 120 €
Location: Land-de DE Germany, 66914 Waldmohr
Seller: Surplex GmbH

Weight approx.: 80 kg Dimensions (l x w x h) approx.: 1600 x 800 x 700 mm Description: 2 pcs., load capacity 12000 dan, acces height approx. 290 mm more

New in: 1995
Price: request quote
Location: Land-nl NL 8531 Lemmer, Kadijk 6
Seller: Valk Machines B.V.

Lathe of geminis 3 bed lifts machine Centre distance: 6.000 mm Turning diameter: 1.200 mm over bed 1,000 mm on cross slide Spindle speed: 2.8-710 RPM. Spindle bore: 110 mm Maximum work piece weight: 25,000 kg Tool changers: Sauter 0.5.320.032 Bed width: 1,150 mm CNC control: Siemens 810T Equipped with: -4 - jaw Chuck Ã?1. 200 mm -JAWS Chuck guard -2 bezel -Powered tailstock -Mayfran Spänen Forderer Country of origin: Spain Spindle power: 37 kW Machine weight: 17,000 kg more

New in: used
Price: request quote
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
New in: 2009
Price: request quote
Location: Land-ch CH 9240 Uzwil, Sternenstrasse 4
Seller: MJS-LINE GmbH

M. No. : 29017 Equipment / Additional information: Voltage: 230 Vac 50Hz Current: 4 A 1 PH IP : 54 Stack height: mini: 100mm material, without pallet Max: 1800mm, including pallet Sheet thickness: mini: 60 micron Max: 1000 microns Mains voltage: 230 volts, 50 Hz, 1 phase Volume: 0.8m3 Sound level: less than 70 dB (A) Speed: Counting time: more

New in: used
Price: request quote
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
New in: 2015
Price: 2.500 €
Location: Land-de DE Weilheim Teck
Seller: A-Z Maschinenwelt

Conveyor type RHIR 80 length 8.6 m AA Conveyed goods Chips, short (aluminium), aluminium sections up to approx. 1 kg Conveying capacity unknown Line management approx. 3.85 m / 0 °-4.35 m / 41.5 ° - 0.4 m / 0 ° Frame Sheet metal construction with a height of 400 mm Conveyor belt Rubber belt, oil - and grease-resistant 40 mm high with T studs at a distance of approx. 600 mm 20 mm high with margin Gallery and through romp 20 mm high Belt width 800 mm Usable width: Track left 195 mm, right lane 395 mm Load stations Roll diameter. 89 mm, ball bearing at a distance of approx. 500 mm Return rollers Roll diameter. 44.5 mm, ball bearing more

New in: used
Price: 195 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
New in: used
Price: 1.650 €
Location: Land-nl NL Enschede
Seller: DutchMach

OBRIEN ALUMINIUM - COLD SAWS TYPE 350 VEGA I -Zaagblad 350 mm -Verstek Dubbel -Materiaalklem -Materiaalaanslag -Beschermkap -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border) more

New in: used
Price: 1.150 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
New in: 2018
Price: request quote
Location: Land-at AT 5400 Hallein, Salzachtalstraße 51
Seller: AGICOM-Pedergnana OEG

The easy 120 is a powerful recycling plant for the production of copper and aluminium from old and residual cables. The easy 120 offers small footprint, easy operation and low energy consumption. The system is an in itself closed system and can be used in single man operation. In the easy 120 can be processed of crushed cables or even cables as a whole. Pre-cutting cables: see field chopper. The tabled electrical cables are crushed homogeneously in the rotor mill (multiple rotating knife, standing counter blade). The granule size is controlled by the used hole sieve here. As a general rule: the thinner to the wires in the cables the smaller the ø the hole screen. The shredde ... more

New in: used
Price: 125 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
New in: 2018
Price: request quote
Location: Land-at AT 5400 Hallein, Salzachtalstraße 51
Seller: AGICOM-Pedergnana OEG

The T150 cable granulating system is a system for the recovery of copper or aluminium cables. The T150 is equipped in addition to an integrated turbine mill with a zig-zag separator which is a novelty in this size. By these integral components, the facility is perfectly suitable for the processing of mixing and wire cable. Head of data or computer can be processed also cable. Technical data: Feed material: mixed cable iron-free Throughput: up to approx. 150 kg / h Drive: electric motor 19 kW Cutting mechanism: 3 rows of rotating blades - 2 fixed counter blade Weight: approx. 1200 kg Dimensions: L B 1700 x 1350 x H 2300 mm Filter Tower: L 800 x W H 800 x 3200 mm Processing of al ... more

New in: used
Price: 180 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
New in: used
Price: request quote
Location: Land-at AT 5400 Hallein, Salzachtalstraße 51
Seller: AGICOM-Pedergnana OEG

The easy 180 is a powerful recycling plant for the production of copper and aluminium from old and residual cables. The easy 180 features small footprint, easy operation and low energy consumption. The system is an in itself closed system and can be used in single man operation. In the easy 180 can be processed of crushed cables or even cables as a whole. Pre-cutting cables: see field chopper. The tabled electrical cables are crushed homogeneously in the rotor mill (multiple rotating knife, standing counter blade). The granule size is controlled by the used hole sieve here. As a general rule: the thinner to the wires in the cables the smaller the ø the hole screen. The shred ... more

New in: used
Price: request quote
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
New in: 2006
Price: request quote
Location: Land-de DE 99195 Großrudestedt, Kranichborner Str. 12
Seller: H+S Maschinentechnik GmbH

MAZAK laser cutting system STX510 MKII 1, 5kW Year of construction: 2006 very well preserved, completely outdated MAZAK laser machines with 1500W Panel sizes: 3000 mm x 1500 mm minimal footprint by 2, 9 m x 7, 3 m Small part conveyor completely encapsulated engine cover FE: up to 12 mm VA: up to 8mm ALMG: up to 6mm Plastic can incl. software including warranty incl. commissioning + training = optional with automatic loading and unloading. more

New in: used
Price: request quote
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
New in: 2000
Price: request quote
Location: Land-de DE 99195 Großrudestedt, Kranichborner Str. 12
Seller: H+S Maschinentechnik GmbH

MAZAK laser cutting system NTX510 1, 5kW Year of construction: 2000 very well preserved, fully reconditioned MAZAK laser machines with 1500W Panel sizes: 3000 mm x 1500 mm minimal footprint by 2, 9 m x 7 m Small part conveyor completely encapsulated engine cover FE: up to 12 mm VA: up to 6mm Plastic can incl. software including warranty incl. extraction system incl. commissioning + training = optional with automatic loading and unloading. more

New in: used
Price: 320 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
New in: 1990
Price: request quote
Location: Land-uk UK Thornton, Hillhouse Business Park
Seller: Euro Rubber Lines

QTY 1 x Pomini VIC1.8-PX1.6 Tandem Lab mixer, Machine number 9912, date 1990, Modern frame design with unitized fabricated steel base, Anti friction roller bearings with floor lubrication, 22kW DC variable speed motor. Rotor speeds 0-230rpm Torque montioring sensors. Siemens PLC control system with S7-300 CPU (combined with original S5). Desktop computer interface. Left hand mixer: Pomini PX1.6 tangential rotor type, Volume 1.6Litre, 2 wing rotors, FY type bronze dust seals, Jacketed chamber for heating or cooling, Hard Chrome plated chamber and rotors, Chamber sides can manually swing open for cleaning/maintenance (by removing 4 bolts on each side), Pneumatic oil injec ... more

New in: used
Price: 380 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
New in: used
Price: request quote
Location: Land-pl PL
Seller: TDMW.PL Igor Kaliniec

Amada laser cutting system Type: Flying optics Working range: 3000 mm x 1500 mm Laser power 4000 Watt CNC Fanuc Year of manuf. 2001, but this machine was working at Amada's showroom as demonstration machine until 2004. It was bought from Amada in 2004, so the machine works on production only from 2004. Very good condition - see pictures! Operational hours turbo about 18.000 h Operational machine approx. 54.500 h Cutting: - black steel: up to 20 mm - stainless steel: up to 12 mm - aluminium: up to 8mm ADDITIONAL EQUIPMENT: Unloading system, which can discharge laser-cut workpieces with programmable vacuum suction cups Last main services: turbo-blower replaced in 2013  ... more

New in: 1990
Price: request quote
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Metal band saw, band saw machine, 2 column guided hydro miter band saw -2 Column-guided hydraulic miter band saw Semiautomatic -1x roller conveyor 1000 mm with stop -1x roller conveyor 2000 mm -1x roller conveyor 1000 mm -Section area: -round 90 ° 400 mm -Flat 90 ° 400 x 725 mm -Square 90 ° 400 mm -round 45 ° 400 mm -Flat 45 ° 400 x 400 mm -Vault opening max. 725 mm -Drive 4 kW -Sägeband speed 17-110 m / min -Schnittdruck regulation hydr. infinitely variable -Coolant system -Minimum lubrication spray device -Dimensions Machine 3300/1750 / H2150 mm -Dimensions Roller conveyor mm -Weight 3000 kg more

New in: 1995
Price: request quote
Location: Land-at AT 08018 Kaiserslautern, Trippstadter Str. 110
Seller: GINDUMAC GmbH

OVERVIEW Brand: Bystronic Model: Bystar 3015 Application Type: Laser Cutting Machine Type: Laser cutting machines Availability: Immediately Production Year: 1995 Location: Austria Origin Country: Switzerland Production Hours: 53112 GENERAL DATA Measurements width: 8750 mm Measurements depth: 6900 mm Measurements height: 2100 mm Machine weight: 1100 kg CONTROL UNIT Brand: Bystronic Model: CNC CNC main language: German CNC language customizable: Yes MAIN DRIVE Laser power: 2.8 kW Laser type: CO2 Laser brand: Bystronic MOVEMENT X-Axis Movement: 3000 mm Y-Axis Movement: 1500 mm Z-Axis Movement: 200 mm WORKPIECE Workpiece X: 3000 mm Workpiece Y: 1 ... more

New in: used
Price: 30 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
New in: 2004
Price: 39.500 €
Location: Land-de DE 90559 Oberferrieden, Am Espen 7
Seller: Prime Catch Seafood GmbH

Length x width x height 13500.0 mm Ã? 4500.0 mm Ã? 3000.0 mm, weight 2000.0 kg This system was used to thaw frozen shrimp, frozen fish and frozen meat and / or IQF are used as raw material usage. Vsk8ty It is optimized, carefully to defrost the product in a power-saving mode and to minimize the damage, as well as the weight loss during the process. The income proved to 3-5% better than other systems, which the seller has operated. It was manufactured by the German high-tech company Heinrich GmbH and was installed in 2004. The system has been well maintained over the years by the manufacturer and maintained. The Heinrich GmbH will support the proper removal and, if reque ... more

New in: used
Price: 30 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
New in: 2002
Price: request quote
Location: Land-at AT 08018 Kaiserslautern, Trippstadter Str. 110
Seller: GINDUMAC GmbH

OVERVIEW Brand: Bystronic Model: Bystar 3015 Application Type: Laser Cutting Machine Type: Laser cutting machines Availability: Immediately Production Year: 2002 Location: Austria Origin Country: Switzerland Production Hours: 33067 GENERAL DATA Measurements width: 9998 mm Measurements depth: 8806 mm Measurements height: 3500 mm Machine weight: 20000 kg CONTROL UNIT Brand: Bystronic Model: CNC CNC main language: German CNC language customizable: Yes MAIN DRIVE Laser power: 4 kW Laser type: Co2 Laser brand: Bystronic MOVEMENT X-Axis Movement: 3000 mm Y-Axis Movement: 1500 mm Z-Axis Movement: 170 mm WORKPIECE Workpiece X: 3000 mm Workpiece Y: 150 ... more

New in: 1996
Price: request quote
Location: Land-de DE
Seller: VBW Asset Trade Weihenstephan GmbH

capacity: 55000 Bottles/h max. filling pressure: 7 bar volume product-ring bowl: 550 l Power consumption: 25 kW weight: 19 t formats: bottle formats: 0,33 l Vichy-bottles, 0,5 l NRW-bottles, bottle diameter: 50-75 mm, bottle height: 150-330 mm Machine pitch: filling valves: 130, division of the valves: 87 mm, closure heads: 26, division of the closure heads: 87 mm Direction: right-left Operation / control: Siemens S7 Basic construction: 10 calotte feet equipment: Filling valves with integrated hot water scouring, automatic filling height adjustment, foaming by means of automatically positioning HDE, bottle control, air CO2 sterilizer, accessories: Closing container with mini / maxi contact, ... more

New in: 2013
Price: request quote
Location: Land-it IT 00198 Rome, Via Alessandria 208
Seller: Alcon SRL

HELIOS - HEL105CA Year 2012 Gluer with transport belt, for paper, cloth, fabric, buckrum, PVC, board, cardboard and other materials for paperconverting, bookbindery and box-making. - Top-surface gluing unit for hot and cold glue with re-circulating pump - Viscosity control unit with mixer (optional) - Normal or vacuum transport belt - Special size versions (optional) - Nip roller Auriga at the end of the belt (optional - pag.9) - Indexing stop and board spotting guide (optional) • Versatile and acurate • Suitable to all production requirements • Rust-proof materials: long life and ease of cleaning and maintenance • It can feed more operators along the belt LINX - LY ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

stainless steel, incl. proofer+ suction fan, \r\nbaking chamber: 5 pans 600 x 400 mm\r\nproofing cabinet: 16 pans 600 x 400 mm\r\n more

New in: new
Price: request quote
Location: Land-de DE 33161 Hövelhof, Lehmweg 38
Seller: Meinolf Stroth / MS Maschinen

Packaging advice: You would like to convert your production to endless corrugated board "just in time"? You already have an existing packaging concept based on endless corrugated board which is getting old? We advise and show you new ways, to minimize high                   operating costs. Analysis - Evaluation - Implementation Take the advantage of 20 years of experience in the processing of endless corrugated board from the pile. They tell us how you want to work. more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

with 4 edges\r\nminimum taking 10 trays\r\n more

New in: 2006
Price: 6.000 €
Location: Land-ro RO 41022 Oradea, Calea Aradului, no. 23/39
Seller: Kuhn & Partner Romania SRL

Description Brand Dadaux Model Titan CUT 45 V ID 7258 Status Active Price 6.000 € + VAT Year of manufacture 2006 Location Oradea (RO) Bowl cutter Dadaux Titan CUT 45 V manufactured in 2006 with stainless steel body, 6 knives, IP 54, 2 speeds, bowl capacity: 40 liters, bolt rotation speed: 8 or 16 turns / minute, engine power: 0.5 kW . Knife rotation speed: 1000 or 3600 rpm, knife motor power: 5.8 kW. Dimensions (L x W x H): 1044 x 879 x 1071 mm. Weight: 380 kg. Three-phase current. The bowl is produced using a special process which melts down stainless steel to a thickness of 1-2cm, to produce a single non jointed bowl. The chopping head comprises of six knives which can easil ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

for making rustic-square rolls\r\nwith moistener + strewer device, fabr. Lippelt, type Mohno\r\n working width 250 mm, belt width 305 mm\r\n incl. 2 plates for strewer\r\nstainless steel coverplates,\r\nlefthand - operation, capacity max. 4.500 pcs./h\r\naccessories: \r\nknives 1-row, w 165 mm, 90 - 600 gr., 900 - 1.000 St/h\r\n 2-row, w 82 mm, 95 - 250 gr., 1.800 - 2.500 St/h\r\n 3-row, w 55 mm, 45 - 150 gr., 2.000 - 4.500 St/h\r\n 4-row, w 41 mm, 35 - 80 gr., 2.500 - 4.500 St/h\r\n more

New in: used
Price: request quote
Location: Land-cz CZ 25219 Rudna, Horelicke namesti 1263
Seller: CEE-Machines

Maximum turning length: 120 mmMax. Turning diameter: 60 mm The machine is in good technical condition, by prior arrangement, the opportunity to test. Feeder Rod Fedek sunny 542S 1 (3. 2 m) and this special accessories: 1 piece stacking conveyor with tank 1 piece collector -. more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

with 3 edges\r\nminimum taking 10 trays\r\n more

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more types: