1000 offers

maximum number of results exceeded > 1000
please refine your search

New in: 1979
Price: 7.000 €
Location: Land-it IT 13060 Biella, Via Lamarmora 11
Seller: MG Macchine Grafiche

-Light 115 cms. -Year 1979, Photocells, air bed -Standard original programmation, spare knife -All tools and accessories more

New in: 1992
Price: used machinery auction RESALE 9.000 €
Location: Land-de DE Germany, 70839 Gerlingen
Seller: Surplex GmbH

Weight approx.: 28500 kg Dimensions (l x w x h) approx.: 10000 x 2000 x 2500 mm Description: BATTENFELD BK-T 5000/2500 Injection Moulding Machine - machine no.: 48115 - operating voltage: 220/380 V, 50 Hz - closing force: 500 t - daylight: 815 mm - opening path: max. 850 mm - installation height: min./max. 375/850 mm - ejector force: 137 kN - ejector stroke: 250 mm - core pulls: 2 - screw diameter: 70 mm - screw path: max. 300 mm - screw speed: max. 170 rpm - injection force: max. 825 kN - max. injection weight: 1.062 g - spec. injection pressure: 2.143 bar - control system: UNILOG 4000 B - injection moulds are not in scope of delivery! - see video more

New in: 2018
Price: 5.390 €
Location: Land-ch CH Eriswil
Seller: MATEC system+technik GmbH

MATEC-Vibrorinnen from our own development and production running lightly and quietly and transport Schuettguter and individual loads up to 250 kg with minimal energy over long distances up to 12 m at a time with a hand drill 300 w power consumption. The combined forced - and promotion of resonance stores the kinetic energy in the spring and must compensate for only the frictional resistance of the material. Sawdust, metal chips, gravel, Earth, grain, hay and grass, etc. are exactly equal soon transported with approximately 17 m / min. by means of Frequenzumforner the speed can be adjusted. The transport and screening in a single operation with a built-in sieve base perforation on reque ... more

New in: 2001
Price: used machinery auction RESALE 7.000 €
Location: Land-de DE Germany, 70839 Gerlingen
Seller: Surplex GmbH

Weight approx.: 3600 kg Dimensions (l x w x h) approx.: 5100 x 1450 x 2100 mm Description: BATTENFELD TM 1000/350 Injection Moulding Machine - machine no.: 25461 - closing force: 100 t - daylight: 420 mm - installation height: min./max. 200/450 mm - core pulls: 2 - screw diameter: 35 mm - max. injection weight: 169 g - spec. injection pressure: 2.083 bar - control system: UNILOG B4 - injection moulds are not in scope of delivery! more

New in: 2011
Price: 2.500 €
Location: Land-de DE 63110 Rodgau, Leipziger ring 172
Seller: Khajavi-Tai Maschinenvermittlung

Lehmann EA 410 2A With light tailstock Year of construction: 2011 The axes are Mint and ran almost not at all! Suitable for Siemens and HH control without problem! State top! more

New in: 1990
Price: used machinery auction RESALE 1.990 €
Location: Land-de DE Germany, 75397 Simmozheim
Seller: Surplex GmbH

Weight approx.: 7000 kg Dimensions (l x w x h) approx.: 5500 x 1400 x 1900 mm Description: KLÖCKNER-FERROMATIK FM 130 Injection Moulding Machine - closing force: 13 t - control system: PMC - injection weight: approx. 230 g - opening path: approx. 750 mm - plate dimensions: approx. 600 x 560 mm - screw diameter: 50 mm - daylight: 460 x 460 mm - with documentation - injection moulds are not in scope of delivery! more

New in: 2006
Price: request quote
Location: Land-pl PL 93320 Lodz, Sarmacka 8/25
Seller: PaGaPlast

Manufacturer/manufacturer: Arburg Typ/type: 420C 800-250 Year/year: 2006 Control/controller: Selogica Clamping force/clamping force: 800 ton Holmabstand/Dist.Betw.Tiebars: 420 x 420 mm Disk size/platen size: 570 x 570 mm WZ height/mould hight: min 250 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 750 mm Auger/screw size: 30 mm Stroke volume/shot volume: 106 CC / 100 gram PS Spritzdr. / injection pressure: bar General / General engine power: 15 kW Heating/heating power: 6, 5kW Dimensions/dimensions: 4.2 m x 1.6 m x 2.1 m Weight/weight: 3460 kg Options/optional extras Core puller / core pulling: x 1 WkZ-pressure / cavity pressure x 1 Hot run ... more

New in: 1998
Price: used machinery auction RESALE 2.700 €
Location: Land-de DE Germany, 75397 Simmozheim
Seller: Surplex GmbH

Weight approx.: 6800 kg Dimensions (l x w x h) approx.: 5000 x 1200 x 2000 mm Description: ARBURG ALLROUNDER 520 M 2000-675 Injection Moulding Machine - machine no.: 172415 - with DÜROPLASTE injection unit - operating voltage: 400 V, 3~, 50 Hz - total connected load: 30 kW - screw diameter: 45/50/55/60 mm - screw path: max. 180 mm - injection pressure: max. 2500/2050/1700/1400 bar - tool diameter: max. 772 mm - closing force: 2000 kN - opening force max.: 50/600 kN - clamping plates: 750 x 715 mm - daylight: 520 x 520 mm - opening path: max. 650 mm - mould installation height: min. 250 mm - control system: MULTRONICA - ejector path: 225 mm - ejector force: max. 65 kN - pump motor: 30 kW - w ... more

New in: 2001
Price: request quote
Location: Land-pl PL 93320 Lodz, Sarmacka 8/25
Seller: PaGaPlast

Manufacturer/manufacturer: Arburg Typ/type: Centex 370C 800-250 Year/year: 10/2001 Control/controller: Selogica Clamping force/clamping force: 800 kN Holmabstand/Dist.Betw.Tiebars: 370 x 370 mm Disk size/platen size: 570 x 570 mm WZ height/mould hight: min 250 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 750 mm Auger/screw size: 30 mm Stroke volume/shot volume: 106 CC / 101 PS gram Spritzdr. / injection pressure: bar General / General engine power: 15 kW Heating/heating power: 6,5 kW Dimensions/dimensions: 4.4 m x 1.6 m x 2.1 m Weight/weight: 3180 kg Options/optional extras Robot Wittman W711-0406 (2005) WkZ-pressure / cavity pressure x 1  ... more

New in: 1997
Price: used machinery auction RESALE 2.700 €
Location: Land-de DE Germany, 75397 Simmozheim
Seller: Surplex GmbH

Weight approx.: 3500 kg Dimensions (l x w x h) approx.: 4500 x 1300 x 1800 mm Description: ARBURG ALLROUNDER 420 M 1000-350 Spritzgießmaschine - machine no.: 170043 - operating voltage: 400 V, 3~, 50 Hz - total connected load: 30 kVA - screw diameter: 35/40/45 mm - screw path: max. 145 mm - injection pressure: max. 2550/2050/1650 bar - tool diameter: max. 610 mm - closing force: 1000 kN - opening force max.: 35/290 kN - clamping plates: 545 x 545 mm - daylight: 420 x 420 mm - opening path: max. 500 mm - mould installation height: min. 250 mm - control system: MULTRONICA - ejector path: 175 mm - ejector force: max. 40 kN - pump motor: 22 kW - with documentation - injection moulds are not in  ... more

New in: 2001
Price: request quote
Location: Land-pl PL 93320 Lodz, Sarmacka 8/25
Seller: PaGaPlast

Manufacturer/manufacturer: Arburg Typ/type: Centex 370C 800-250 Year/year: 02/2001 Control/controller: Selogica Clamping force/clamping force: 800 kN Holmabstand/Dist.Betw.Tiebars: 370 x 370 mm Disk size/platen size: 570 x 570 mm WZ height/mould hight: min 250 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 750 mm Auger/screw size: 25 mm Stroke volume/shot volume: 73 CC / 70 gram PS Spritzdr. / injection pressure: bar General / General engine power: 15 kW Heating/heating power: 6,5 kW Dimensions/dimensions: 4.4 m x 1.6 m x 2.1 m Weight/weight: 3180 kg Options/optional extras Robot Wittman W721-0483 (2006) WkZ-pressure / cavity pressure x 1 H ... more

New in: 1995
Price: used machinery auction RESALE 2.700 €
Location: Land-de DE Germany, 75397 Simmozheim
Seller: Surplex GmbH

Weight approx.: 3500 kg Dimensions (l x w x h) approx.: 4500 x 1300 x 1800 mm Description: ARBURG ALLROUNDER 420 M 1000-350 Injection Moulding Machine - machine no.: 164776 - operating voltage: 400 V, 3~, 50 Hz - total connected load: 22 kW - screw diameter: 35/40/45 mm - screw path: max. 145 mm - injection pressure: max. 2550/2050/1650 bar - tool diameter: max. 610 mm - closing force: 1000 kN - opening force max.: 35/290 kN - clamping plates: 545 x 545 mm - daylight: 420 x 420 mm - opening path: max. 500 mm - mould installation height: min. 250 mm - control system: MULTRONICA - ejector path: 175 mm - injection moulds are not in scope of delivery! - ejector force: max. 40 kN - pump motor: 22 ... more

New in: 2004
Price: request quote
Location: Land-pl PL 93320 Lodz, Sarmacka 8/25
Seller: PaGaPlast

Manufacturer/manufacturer: Arburg Typ/type: 420S 800-150 Year/year: 2004 Control/controller: Selogica Clamping force/clamping force: 800 kN Holmabstand/Dist.Betw.Tiebars: 420 x 420 mm Disk size/platen size: 570 x 570 mm WZ height/mould hight: min 250 mm Opening/opening stroke: 450 mm Plate distance of max/Max open daylight: 700 mm Auger/screw size: 25 mm Stroke volume/shot volume: 53 ccm / 51 gram PS Spritzdr. / injection pressure: bar General / General engine power: 15 kW Heating/heating power: 6,5 kW Dimensions/dimensions: 4.2 m x 1.6 m x 2.1 m Weight/weight: 3460 kg Options/optional extras Robot Wittmann W721-0420 (2006) WkZ-pressure / cavity pressure x 2 Hot runne ... more

New in: 1982
Price: used machinery auction RESALE 990 €
Location: Land-de DE Germany, 75397 Simmozheim
Seller: Surplex GmbH

Weight approx.: 1580 kg Dimensions (l x w x h) approx.: 3100 x 1240 x 1500 mm Description: ARBURG 305 - 210 - 700 Injection Moulding Machine - machine no.: 121166 - operating voltage: 380 V, 50 Hz - total connected load: 16.6 kW - screw diameter: 25 mm - injection pressure: 2950 bar - shot weight: 62 g - closing force: 700 kN - injection force: 145 kN - clamping plates: 432 x 310 mm - daylight: 305 x 135 mm - mould installation height: min. 200 - 400 mm - tool opening: 250 mm - control system: POLYTRONICA - ejector hydraulical: 70 mm - heating: 5,5 kW - pump motor: 11 kW - injection moulds are not in scope of delivery! more

New in: 2004
Price: request quote
Location: Land-pl PL 93320 Lodz, Sarmacka 8/25
Seller: PaGaPlast

Manufacturer/manufacturer: Arburg Typ/type: control 320C-400-100 +. Year/year: 2004 Control/controller: Selogica Clamping force/clamping force: 400 kN Holmabstand/Dist.Betw.Tiebars: 320 mm x 320 mm Disk size/platen size: 446 x 446 mm WZ height/mould hight: min 200 mm Opening/opening stroke: 350 mm Plate distance of max/Max open daylight: 550 mm Auger/screw size: 25 mm Stroke volume/shot volume: 49 CC / 46 gram PS Spritzdr. / injection pressure: bar General / General engine power: 11 kW Heating/heating power: 4.9 kW Dimensions/dimensions: 3.4 m x 1.5 m x 2 m Weight/weight: 2100 kg Options/optional extras Hot runner control device / hot runner (6 zones) more

New in: 1999
Price: used machinery auction RESALE 1.800 €
Location: Land-de DE Germany, 58507 Lüdenscheid
Seller: Surplex GmbH

Weight approx.: 2500 kg Dimensions (l x w x h) approx.: 3300 x 1160 x 4500 mm number of racks: 36 max. permitted load per load bucket: 108 kg max. permitted load: 2268 kg Description: Maintained HÄNEL Rotomat 900 Vertical Carousel / Paternoster - Max. payload per shelf : 108 kg - Max. payload per carousel: 2268 kg - 36 shelf boards partially equipped with drawers and inserted floors - Shelf depth / width: 400 x 2800 - Drawers depth /width: 350 x 1350 - Light barrier - Digital display - 2 motors - 400 V, 11 A, 2,6 kW 900/1390 rpm - For further information see photos as well as video Shelving system is sold without contents more

New in: 2003
Price: request quote
Location: Land-pl PL 93320 Lodz, Sarmacka 8/25
Seller: PaGaPlast

Manufacturer/manufacturer: Arburg Typ/type: 320C 400-100 Year/year: 2003 Control/controller: Selogica Clamping force/clamping force: 40 ton Holmabstand/Dist.Betw.Tiebars: 320 mm x 320 mm Disk size/platen size: 446 x 446 mm WZ height/mould hight: min 200 mm Opening/opening stroke: 550 mm Plate distance of max/Max open daylight: 750 mm Auger/screw size: 25 mm Stroke volume/shot volume: 49 CC / 46 gram PS Spritzdr. / injection pressure: bar General / General engine power: 11 kW Heating/heating power: 4,5 kW Dimensions/dimensions: 3.2 m x 1.5 m x 2 m Weight/weight: 2100 kg Options/optional extras Core puller / core pulling: x 1 Hot runner control device / hot runner (12 zo ... more

New in: used
Price: used machinery auction RESALE 5 €
Location: Land-es ES Spain, 08570 Torello Barcelona
Seller: Surplex GmbH

Weight approx.: 1 kg Dimensions (l x w x h) approx.: 260 x 120 x 90 mm Description: Flashing 9 leds. Battery not included. Voltage 18 V. Never used. Certified delivery by parcel service to the buyers address on the peninsula. For other destinations, ask for prices. more

New in: 2002
Price: request quote
Location: Land-pl PL 93320 Lodz, Sarmacka 8/25
Seller: PaGaPlast

Manufacturer/manufacturer: Arburg Typ/type: 420 C 1300 â 150/60 (2-component) Year/year: 2002 Control/controller: Selogica Clamping force/clamping force: 1300 kN Holmabstand/Dist.Betw.Tiebars: 420 x 420 mm Disk size/platen size: 605 x 605 mm WZ height/mould hight: min. 450 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 950 mm Schnecke/Screw size: 1) 25 mm 2) 18 mm Stroke volume/shot volume: 25 mm / 18 mmPS Spritzdr. / injection pressure: bar General / General engine power: 22 kW Heating/heating power: 9.4 kW / 3,2 kW Dimensions/dimensions: 4.3 m x 1.6 m x 1.8 m Weight/weight: 4400 kg Options/optional extras Robot: Wittmann W631-0312 (20 ... more

New in: 1999
Price: used machinery auction RESALE 1.800 €
Location: Land-de DE Germany, 58507 Lüdenscheid
Seller: Surplex GmbH

Weight approx.: 2500 kg Dimensions (l x w x h) approx.: 3300 x 1160 x 4500 mm number of racks: 36 max. permitted load per load bucket: 108 kg max. permitted load: 2268 kg Description: Maintained HÄNEL Rotomat 900 Vertical Carousel / Paternoster - Max. payload per shelf : 108 kg - Max. payload per carousel: 2268 kg - 36 shelf boards partially equipped with drawers and inserted floors - Shelf depth / width: 400 x 2800 - Drawers depth /width: 350 x 1350 - Light barrier - Digital display - 2 motors - 400 V, 11 A, 2,6 kW 900/1390 rpm - For further information see photos as well as video Shelving system is sold without contents more

New in: 2008
Price: request quote
Location: Land-pl PL 93320 Lodz, Sarmacka 8/25
Seller: PaGaPlast

Manufacturer/manufacturer: Arburg Typ/type: 520C 2000-800 Year/year: 2006 Control/controller: Selogica Clamping force/clamping force: 2000 kN Holmabstand/Dist.Betw.Tiebars: 570 x 570 mm Disk size/platen size: 795 x 795 mm WZ height/mould hight: min 300 mm Opening/opening stroke: 650 mm Plate distance of max/Max open daylight: 950 mm Auger/screw size: 50 mm Stroke volume/shot volume: 392 ccm / 373 gram PS Spritzdr. / injection pressure: bar General / General engine power: 30 kW Heating/heating power: 19 kW Dimensions/dimensions: 6 m x 1.8 m x 2.1 m Weight/weight: 7900 kg Options/optional extras Robot: Wittmann W721-1032 (2008) Core puller / core pulling: x 1 WkZ-pressu ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

stainless steel, incl. light and filter\r\nwidth 3500 mm, depth 1200 mm, height 400 mm more

New in: 2006
Price: request quote
Location: Land-pl PL 93320 Lodz, Sarmacka 8/25
Seller: PaGaPlast

Manufacturer/manufacturer: Arburg Typ/type: 520C 2000-800 Year/year: 2006 Control/controller: Selogica Clamping force/clamping force: 2000 kN Holmabstand/Dist.Betw.Tiebars: 520 mm x 520 mm Disk size/platen size: 728 x 728 mm WZ height/mould hight: min 400 mm Opening/opening stroke: 650 mm Plate distance of max/Max open daylight: 1050 mm Auger/screw size: 45 mm Stroke volume/shot volume: 318 CC / 302 gram PS Spritzdr. / injection pressure: bar General / General engine power: 30 kW Heating/heating power: kW 14.9 Dimensions/dimensions: 5.5 m x 1.9 m x 2.2 m Weight/weight: 7300 kg Options/optional extras Robot: Wittman W721 0494 (2006) Core puller / core pulling: x 2 Hot r ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

Type: IK 2183, with uv - light, 230 V\r\n230 V; 2 x 15 Watt\r\ngood condition more

New in: 2003
Price: request quote
Location: Land-pl PL 93320 Lodz, Sarmacka 8/25
Seller: PaGaPlast

Manufacturer/manufacturer: Arburg Typ/type: 370C 800-250 Year/year: 2003 Control/controller: Selogica Clamping force/clamping force: 800 kN Holmabstand/Dist.Betw.Tiebars: 370 x 370 mm Disk size/platen size: 570 x 570 mm WZ height/mould hight: min 250 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 750 mm Auger/screw size: 30 mm Stroke volume/shot volume: 106 CC / 100 gram PS Spritzdr. / injection pressure: bar General / General engine power: 15 kW Heating/heating power: 6,5 kW Dimensions/dimensions: 4.4 m x 1.6 m x 2.1 m Weight/weight: 3180 kg Options/optional extras Robot Witmann W818-8755 (2017) WkZ-pressure / cavity pressure x 1 Hot runner ... more

New in: 2018
Price: request quote
Location: Werk
Seller: Sperling Werkzeugmaschinen

saw blade diameter: 400 x 50 mm turning speeds: 3000 U/min : 100 x 110 mm : 250 x 85 mm capacity 90 degrees: round: 130 mm : 110 x 110 mm Capacity 45° rectangular: 160 x 70 mm : 115 / mass. 90 mm work height max.: 970 mm total power requirement: 1,5 kW weight of the machine ca.: 380 kg dimensions of the machine ca.: 900 x 1000 x 1480 mm DESCRIPTION Automatic mitre cutting-off machine for Alumininium / pvc and light metals, with Ø400 TCT ascending blade saw. Easy clamping to 450 / 900 / -450 cutting degrees. CHARACTERISTICS THREE PHASE MOTOR 400Ø Tungsten Carbide TCT saw included / 45° / 90°/ -45° / -60° Lockable degrees and intermediate angles Two Pneumatic vertical and horizontal  ... more

New in: 2003
Price: request quote
Location: Land-pl PL 93320 Lodz, Sarmacka 8/25
Seller: PaGaPlast

Manufacturer/manufacturer: Arburg Typ/type: 520C 2000 - 675 control +. Year/year: 2003 Control/controller: Selogica Clamping force/clamping force: 200 ton Holmabstand/Dist.Betw.Tiebars: 520 mm x 520 mm Disk size/platen size: 685 mm x 685 mm WZ height/mould hight: min 250 mm Opening/opening stroke: 650 mm Plate distance of max/Max open daylight: 900 mm Auger/screw size: 50 mm Stroke volume/shot volume: 353 ccm / 336 gram PS Spritzdr. / injection pressure: bar General / General engine power: 30 kW Heating/heating power: kW 14.9 Dimensions/dimensions: 5 m x 1.9 m x 2.1 m Weight/weight: 7100 kg Options/optional extras Robot: Wittman W620-0643 (2003) Core puller / core pull ... more

New in: 2017
Price: request quote
Location: in Transit
Seller: Stiens Werkzeugmaschinenhandelsgesellschaft mbH

turning diameter: 400 mm turning length: 555 mm control: Siemens SlimLine greates pass round over bed: 650 mm Swing dia. over traverse guideway: 465 mm Main spindle:: Max. rpm: 4.000 min/-1 power capacity - main spindel: 25,5 / 17 kW max. Torque: 426 Nm spindle diameter in front bearing: 130 mm max. bar capacity: 80 mm usable bar diameter: 78 mm max. chucking diameter: 315 mm chucking diameter: 250 mm spindle nose: A2-8 C-Axis: 360 ° turret:: number of toolpositions: 12 pos. tool taper: VDI 40 driven statition: 12 pos Spindle speed - driven tool stations: max. 4.000 min -1 power capacity - driven tool-stations: 5,44 kW max. Torque: 20 Nm axis stroke:: x-axis: 267,5 mm y-axis: +/- 60 mm z ... more

New in: 2008
Price: request quote
Location: Land-pl PL 93320 Lodz, Sarmacka 8/25
Seller: PaGaPlast

Manufacturer/manufacturer: Arburg Typ/type: 630S 2500-800 Year/year: 2008 Control/controller: Selogica Clamping force/clamping force: 275 ton Holmabstand/Dist.Betw.Tiebars: 630 x 630 mm Disk size/platen size: 795 x 795 mm WZ height/mould hight: min 300 mm Opening/opening stroke: 1300 mm Plate distance of max/Max open daylight: 1300 mm Auger/screw size: 50 mm Stroke volume/shot volume: 392 ccm / 373 gram PS Spritzdr. / injection pressure: bar General / General engine power: 30 kW Heating/heating power: 19.9 kW Dimensions/dimensions: 6 m x 1.8 m x 2.1 m Weight/weight: 7900 kg Options/optional extras Robot ARBURG MULTILIFT H with B-axis 2008 Core puller / core pulling: x  ... more

New in: used
Price: request quote
Location: Oberkochen
Seller: Gebr. Engelfried oHG

Tenoning spindle: 1 St. Number of milling agregates: 5 St. Spindle diameter: 50 mm Weinig Unicontrol 6 with CNC spindles ... Technical data summary (possibly additionally included accessories please inquire) ... Cut saw ... Crosscut saw electronically, horizontally infinitely adjustable Number of tools: 1 pcs. Spindle speed: 3000-6000 rpm Spindle diameter: 40 mm Tool diameter max .: 400 mm Motor power: 3 kW Adjustment radial pneumatically controlled 8 positions e.g. for edge rounding from above Laser straightening light for detecting the sawing section rounding unit ... Position: horizontally below Motor power: 1.5 kW Spindle diameter: 20 mm Spindle speed: 9000 rpm Tool circle max .: 130 mm  ... more

New in: 2006
Price: request quote
Location: Land-pl PL 93320 Lodz, Sarmacka 8/25
Seller: PaGaPlast

Manufacturer/manufacturer: Arburg Type/type: 420C 800-250 Year/year: 2006 Control/controller: Selogica Clamping force/clamping force: 80 to Holmabstand/Dist.Betw.Tiebars: 420 x 420 mm Disk size/platen size: 570 x 570 mm WZ height/mould hight: min 250 mm Opening/opening stroke: 550 mm Plate distance of max/Max open daylight: 750 mm Auger/screw size: 30 mm Stroke volume/shot volume: 106 CC / 100 gram PS Spritzdr. / injection pressure: bar General / General engine power: 15 kW Heating/heating power: 9 kW Dimensions/dimensions: 4.4 m x 1.6 m x 2.1 m Weight/weight: 3800 kg Options/optional extras Robot: Wittmann W711-2172 (2010) Core puller / core pulling: x 1 WkZ-pressure ... more

New in: used
Price: request quote
Location: Oberkochen
Seller: Gebr. Engelfried oHG

Working width: 6000 mm Working height: 3000 mm Number of cylinders: 6 St. Dimensions (L/W/H): 7500x2000x4120 mm weight: 5000 kg S + S frame press - fully automatic model Super -------------------------------------------------- -------------- CE version The only self-transforming high performance frame press fully automatic, where the woods no longer need to be pre-plugged. The width and height adjustment is achieved by inserting the workpieces directly in the pressing area, without loss of time, accomplished. The frame press machine of the superclass. Basic machine in strongest frame welded construction, from oversized, thick wall special profiles. Guideways for pressure beams and sliding sl ... more

New in: 2006
Price: request quote
Location: Land-pl PL 93320 Lodz, Sarmacka 8/25
Seller: PaGaPlast

Manufacturer/manufacturer: Arburg Type/type: 420C 1000-250 Year/year: 2006 Control/controller: Selogica Clamping force/clamping force: 100 to Holmabstand/Dist.Betw.Tiebars: 420 x 420 mm Disk size/platen size: 570 x 570 mm WZ hight mould at the height: min. 450 mm Opening/opening stroke: 550 mm Plate distance of max/Max open daylight: 950 mm Auger/screw size: 30 mm Stroke volume/shot volume: 106 CC / 101 gram PS Spritzdr. / injection pressure: bar General / General engine power: 18.5 kW Heating/heating power: 6,5 kW Dimensions/dimensions: 4.3 m x 1.7 m x 1.8 m Weight/weight: 3660 kg Options/optional extras Picker Wittman W602 Core puller / core pulling: x 2 WkZ-pressur ... more

New in: 2012
Price: request quote
Location: ab Standort
Seller: Gebr. Engelfried oHG

Number of spindles: 8 St. Working width: 260 mm Working height: 160 mm Length of the planing table: 2000 mm Feed motor: 7 kW Feed speed: 5-30 m/min. total power requirement: kw Dimensions (L/W/H): mm weight of the machine ca.: kg Control: Weinig PowerCom Weinig Powermat 1000 CNC, year 2012 ------------------------------- Executive Summary: ------------------------------- 8 spindles HSK / powerlock large PowerCom controller Grooved Axial and axial axes CNC controlled Detailed description: ------------------------------- Technical specifications: ------------------------------- Working width max. 260 mm Working height max. 160 mm 1. tool holder ------------------------------- First lower tool  ... more

New in: 2008
Price: request quote
Location: Land-pl PL 93320 Lodz, Sarmacka 8/25
Seller: PaGaPlast

Manufacturer/manufacturer: Arburg Typ/type: 420C 1000-250 Year/year: 2007 Control/controller: Selogica Clamping force/clamping force: 1000 kN Holmabstand/Dist.Betw.Tiebars: 420 x 420 mm plate size/platen size: 570 x 570 mm WZ height/mould hight: min 250 mm Opening/opening stroke: 550 mm Plate distance of max/Max open daylight: 800 mm Auger/screw size: 30 mm Stroke volume/shot volume: 106 CC / 101 gram PS Spritzdr. / injection pressure: bar General / General engine power: 18.5 kW Heating/heating power: 6,5 kW Dimensions/dimensions: 4.3 m x 1.7 m x 1.8 m Weight/weight: 3660 kg Options/optional extras Core puller / core pulling: x 2 WkZ-pressure / cavity pressure x 2 Hot  ... more

New in: 2011
Price: used machinery auction RESALE 4.900 €
Location: Land-de DE Germany, 82140 Olching
Seller: Surplex GmbH

Weight approx.: 1500 kg Dimensions (l x w x h) approx.: 1700 x 1200 x 1800 mm Description: Steuerung: SIEMENS Max. working diameter: 12 mm Max. working lenght: 135 mm Spindle speed: 400 - 800 rpm/min Spindle hole diameter: 15 mm Spindle center height: 1000 mm Motor power: 2,2 KW Max. drilling diameter: 7 mm Max. threading: M6 mm Equipment and accessories: Cooling: Cooling unit, coolant tank capacity 75 L, Central lubrication, Working light Additional technical Data please have a look at pictures of the Manual! ATTENTION: No CE-Konformity of the machine! Transport dimensiosn: Machine: 1.600 x 1.200 x 1.800 mm, approx. 1.500 kg Cooling unit + Accessoire: 1.200 x 800 x 1.200 mm more

New in: 2006
Price: request quote
Location: Land-pl PL 93320 Lodz, Sarmacka 8/25
Seller: PaGaPlast

Manufacturer/manufacturer: Arburg Typ/type: 520C 2000-800 Year/year: 2006 Control/controller: Selogica Clamping force/clamping force: 2000 kN Holmabstand/Dist.Betw.Tiebars: 520 mm x 520 mm Disk size/platen size: 728 x 728 mm WZ height/mould hight: min 400 mm Opening/opening stroke: 650 mm Plate distance of max/Max open daylight: 1050 mm Auger/screw size: 45 mm Stroke volume/shot volume: 300 gram PS Spritzdr. 315 ccm / injection pressure: bar General / General engine power: 30 kW Heating/heating power: kW 14.9 Dimensions/dimensions: 5.5 m x 1.9 m x 2.2 m Weight/weight: 7300 kg Options/optional extras Robot: Wittman W721-0482 (2006) Core puller / core pulling: x 2 WkZ-pr ... more

New in: new
Price: request quote
Location: Spanien
Seller: GK Werkzeugmaschinen GmbH

turning diameter:805 mm turning length:3000 mm control:Fanuc 0i TF max. swing over slide:515 mm bed width:425 mm spindle taper:A2-8 spindle speeds:0-1700 1/min. spindle bore:105 mm transmission ratio:2 tailstock quill diameter:96 mm tailstock quill stroke:215 mm taper of tailstock quill:6 MK max. length of work piece:3000 mm rapid traverse x/z:10/10 m/min power requirement:17 kW weight of the machine ca.:7560 kg dimensions of the machine ca.:5530x1800x2230 mm automatic tool changer:8-fach European electric: CNC controller:Fanuc 0i TF CE-design: tools:1 Satz Machine work light: coolant system: automatic lubrication system: electric handwheel: servo spindle motor: Machine semi-cover: : 3 chip  ... more

New in: 2006
Price: request quote
Location: Land-pl PL 93320 Lodz, Sarmacka 8/25
Seller: PaGaPlast

Manufacturer/manufacturer: Arburg Typ/type: 520C 2000-800 Year/year: 2006 Control/controller: Selogica Clamping force/clamping force: 2000 kN Holmabstand/Dist.Betw.Tiebars: 520 mm x 520 mm Disk size/platen size: 728 x 728 mm WZ height/mould hight: min 400 mm Opening/opening stroke: 650 mm Plate distance of max/Max open daylight: 1050 mm Auger/screw size: 45 mm Stroke volume/shot volume: 318 CC / 302 gram PS Spritzdr. / injection pressure: bar General / General engine power: 30 kW Heating/heating power: kW 14.9 Dimensions/dimensions: 5.5 m x 1.9 m x 2.2 m Weight/weight: 7300 kg Options/optional extras Robot: Wittman W721 0494 (2006) Core puller / core pulling: x 2 Hot r ... more

New in: 2015
Price: request quote
Location: Land-de DE
Seller: Seegräber GmbH

Was used for line performance about 12,000 bph. Higher performance is possible. Various 0.7 - 1.0 liter glass bottles for sparkling wine and wine with natural cork, polystop, longcap Closure and aluminum screw cap Control unit PRO -Color display 21 as a touch screen -Industrial PC, INTEL Multicore 3.8 GHz -Form-fitting stainless steel housing IP 65 -Working speed 12.000 bottles / hour. More then 20.000 bph is possible. -Easy to use menu navigation Remote maintenance connectable Level measuring bridge X-ray -under-filling -shapely stainless steel housing -Protection class IP 65 -Height adjustment via handwheel -Closure control optical or inductive Level measuring bridge X-ray -over-filling ... more

New in: 2009
Price: request quote
Location: Land-pl PL 93320 Lodz, Sarmacka 8/25
Seller: PaGaPlast

Manufacturer/manufacturer: Arburg Typ/type: 570 C 2000 â 150/60 (2-component) Year/year: 2006 Control/controller: Selogica Clamping force/clamping force: 2000 kN Holmabstand/Dist.Betw.Tiebars: 570 x 570 mm Disk size/platen size: 795 x 795 mm WZ height/mould hight: min 500 mm Opening/opening stroke: 650 mm Plate distance of max/Max open daylight: 1150 mm Schnecke/Screw size: 1) 25 mm 2) 25 mm Stroke volume/shot volume: 51 gram PS / 37 gram PS Spritzdr. / injection pressure: bar General / General engine power: heating/heating power: dimensions/dimensions: 5.4 m x 2 m x 3.6 m Weight/weight: 9500 kg Options/optional extras Robot: Wittmann W731-0441 (2009) Core puller / ... more

New in: 2011
Price: used machinery auction RESALE 5.500 €
Location: Land-de DE Germany, 66914 Waldmohr
Seller: Surplex GmbH

Weight approx.: 7200 kg Dimensions (l x w x h) approx.: 4600 x 1500 x 2600 mm Description: Load 4990 kg, fork length 1380 mm, shield width approx. 1300 mm, overall height 2500 mm, sideshift, 1007 operating hours, lifting height max. 3410 mm, lighting in front and behind, rotating light, wipers, partly glazed, with battery charger, late delivery more

New in: 2015
Price: request quote
Location: Land-pl PL 93320 Lodz, Sarmacka 8/25
Seller: PaGaPlast

Manufacturer/manufacturer: Arburg Type/type: 570S 2200 400-170 (2-component) Year/year: 2015 Control/controller: Selogica Clamping force/clamping force: 220 ton Holmabstand/Dist.Betw.Tiebars: 570 x 570 mm Disk size/platen size: 795 x 795 mm WZ hight mould at the height: min. 450 mm Opening/opening stroke: 650 mm Plate distance of max/Max open daylight: 1100 mm Auger/screw size: 35 mm / 25 mm Stroke volume/shot volume: 146 gram PS / 56 gram PS Spritzdr. / injection pressure: bar General / General engine power: kW Heating/heating power: kW 9.4 + 4,1 kW Dimensions/dimensions: 5.4 m x 2 m x 3.6 m Weight/weight: 9500 kg Options/optional extras Robot: Wittmann W731-0239 Core ... more

New in: 2009
Price: used machinery auction RESALE 2.500 €
Location: Land-de DE Germany, 66914 Waldmohr
Seller: Surplex GmbH

Weight approx.: 4300 kg Dimensions (l x w x h) approx.: 4200 x 1300 x 2300 mm Description: Machine number 517322605164, lifting height 4950 mm, free lift 1570 mm, heatable cabin with fan, fork rotation device STABAU, fork length 1190 mm, overall height 2200 mm, 2770 operating hours, hybrid technology, Triplex mast, headlights, wipers, rotatinglight (Attention! Late delivery, by arrangement! It is not possible to charge any fees until the date of delivery!) more

New in: 1993
Price: request quote
Location: Land-pl PL 93320 Lodz, Sarmacka 8/25
Seller: PaGaPlast

Manufacturer/manufacturer: Krauss Maffei Typ/type: KM 110-390 C1 Year/year: 1993 Control/controller: MC 4 Clamping force/clamping force: 1500 kN Holmabstand/Dist.Betw.Tiebars: 500 mm x 500 mm Disk size/platen size: 750 x 750 mm WZ height/mould hight: min 250 max 500 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 1060 mm Auger/screw size: 50 mm Stroke volume/shot volume: 442 CC / 394 gram PS Spritzdr / injection pressure: 1946 bar General / General engine power: 30 kW Heating/heating power: 14,8 kW Dimensions/dimensions: 5.5 m x 1.6 m x 2.10 m Weight/weight: 5600 kg Screen text: German Options/optional extras Core puller / core pulling: x 1  ... more

New in: 2008
Price: used machinery auction RESALE 12.800 €
Location: Land-de DE Germany, 42929 Wermelskirchen
Seller: Surplex GmbH

Weight approx.: 6500 kg Dimensions (l x w x h) approx.: 3000 x 1600 x 2800 mm Description: TOP gas forklift from LINDE with 10518 operating hours Standard lifting frame 3800 mm lifting height, Height 2800 mm, Super elastic tyres Raised full cabin with heating, Safety light more

New in: 2018
Price: request quote
Location: Land-at AT 5400 Hallein, Salzachtalstraße 51
Seller: AGICOM-Pedergnana OEG

The easy 120 is a powerful recycling plant for the production of copper and aluminium from old and residual cables. The easy 120 offers small footprint, easy operation and low energy consumption. The system is an in itself closed system and can be used in single man operation. In the easy 120 can be processed of crushed cables or even cables as a whole. Pre-cutting cables: see field chopper. The tabled electrical cables are crushed homogeneously in the rotor mill (multiple rotating knife, standing counter blade). The granule size is controlled by the used hole sieve here. As a general rule: the thinner to the wires in the cables the smaller the ø the hole screen. The shredde ... more

New in: 1982
Price: used machinery auction RESALE 350 €
Location: Land-de DE Germany, 66914 Waldmohr
Seller: Surplex GmbH

Weight approx.: 5000 kg Dimensions (l x w x h) approx.: 4500 x 1900 x 3000 mm Description: Machine number 60 DA 8400, load 3000 kg, forward and reverse gear via pedals, cross-country tyres, font axis with twin tyres, fork length 1200 mm, shield width 1800 mm, overall height 2900 mm, rotating light, 3692 operating hours, free lift 1840 mm, lifting height 3650 mm (Attention! Late delivery, by arrangement! It is not possible to charge any fees until the date of delivery!) more

New in: 1985
Price: request quote
Location: Land-de DE
Seller: Reinhold Schmitt GmbH

material width 160 - 870 mm material thickness 0,20 - 3,00 mm daylight width 900 mm tensile strength 450 N/mm² strip width min. 8,00 mm coil weight max. 8,00 t coil inside diameter 400 - 508 - 750 mm coil outside diameter 1.500 mm knife shaft diameter 160 mm blade diameter 300 mm cutting speed 120 m / min working direction left - right line consisting of: coil car construction l - type over floor decoiler with press roll capacity max. 8,0 t coil inside diameter 508 mm coil outside diameter 1.500 mm infeed table infeed unit with press roll infeed and centering unit to the slitting shear slitting shear scrap winder roll saddle with separator rolls pad / felt brake uni ... more

New in: used
Price: 2.450 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more types: