british flag
Resale Logo

Electric motor used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used medical equipment  Dipl.-Ing. O. Saad  http://www.2hand4sale.de 
banner logo
start page > keywords Electric motor > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125465476 102

WEILER PRIMUS VC for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


L + Z lathe WEILER PRIMUS VC 04-03-209 delivery: immediately number: 04-03-209 manufacturer: Weiler type: Primus VC MACHINE data year: approx. 1999 L x W x H: 1500 x 1000 x 1600 mm weight: approx. 650 kg Very good  ...
used machine
 
L + Z lathe WEILER PRIMUS VC 04-03-209 delivery: immediately number: 04-03-209 manufacturer: Weiler type: Primus VC

MACHINE data year: approx. 1999 L x W x H: 1500 x 1000 x 1600 mm weight: approx. 650 kg

Very good condition specifications digital display: 3 - axes - digital display (hamlet/Siemens) dimensions: Max turning diameter over bed: approx. Ã? 280 mm max turning diameter over support: approx. Ã? 150 mm maximum turning length: approx. 500 mm bar passage: approx. Ã? 40 mm spindle: speed range (continuous): approx. 30-4000 RPM spindle nose: A 2 - 5 power: approx. 4,0 kW automatic longitudinal & plan vorschuebe: feed range: approx. 0.006 - 0.63 mm / Rev suitable for threaded: - metric 0.25 - 8 mm - inch 80-2 Gg / "-slide" metral - pitch thread 200 - 5 DP - module 0.2-4 live: MK 3 accessories â?¢ 3 - bake - chuck Ã? 140 mm â?¢ quick change Toolpost + 3 Inserts â?¢ complete machine documentation â?¢ emergency - off â?¢ drill Chuck for tailstock â?¢ revolving tailstock tip

â?¢ Various wrenches â?¢ bed fence â?¢ emergency â?¢ coolant system â?¢ electric Chuck guard - device â?¢ cover L & Z - spindle

Accessories on request price and other specifications on request
1999
Price  
    request
125460780 206

S+S Super for sale
Frame press


Working width: 4500 mmWorking height: 2500 mmNumber of cylinders: 6 St.Dimensions (L/W/H): 6.400 x 1.850 x 3.650 mmWeight: 3.500 kgElectrohydraulic frame presser S + S Superwith automatic adjustmentCE versionFrame press  ...

 
Working width: 4500 mm
Working height: 2500 mm
Number of cylinders: 6 St.
Dimensions (L/W/H): 6.400 x 1.850 x 3.650 mm
Weight: 3.500 kg
Electrohydraulic frame presser S + S Super
with automatic adjustment

CE version

Frame press machine with 2 pieces movable presses, complete with 8 pieces
Holding cylinder for fixing frame parts, as well as with motor protection and
Control circuit breaker.

Size adjustment by optical length detection for height and width.

Working length x width: 4500 x 2500 mm

Rotating beam light curtain OTD 3

Medium pressure bar with automatic adjustment in height
up to 2500 mm high

Single pressure control for medium pressure bars

Cross-pressure device for pressing cross-bar window

Single pressure control for cross-pressure device

A triangle studio window crimping apparatus comprising:

Locking device of the vertical pressure beam
-3 push-on side-mounted pendulum pressure plates and regulators,
Central drive with single, pneumatic decoupling of the
Vertical pressure cylinder
(thereby independent of each other is the setting in any
Working height)


electrical hand control

Double pendulum plate

2 pendulum printing plates with extension (for triangular window triangle)


(Techn. Description according to manufacturer - without guarantee!)



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125465469 102

WEILER PRAKTIKANT 500 R PRAKTIKANT 50 for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


L + Z lathe hamlet intern 500 R without -04-03-192 delivery: upon request number: 04-03-192 manufacturer: Weiler type: intern 500 R without . A MACHINE data built: approx 1980 L x W x H: approx. 1400 x 800 x 1500 mm  ...
used machine
 
L + Z lathe hamlet intern 500 R without -04-03-192 delivery: upon request number: 04-03-192 manufacturer: Weiler type: intern 500 R without .
A
MACHINE data built: approx 1980 L x W x H: approx. 1400 x 800 x 1500 mm weight: approx. 550 kg

Very good condition - without
(Click on without to see the extent of the overhaul)

TECHNICAL data digital display: 3 - axes - digital display new dimensions: Max turning diameter over bed: approx. Ã? 280 mm max turning diameter over support: approx. Ã? 150 mm maximum turning length: approx. 500 mm bar passage: approx. Ã? 36 mm spindle: speed range: approx. 42-200 0 RPM spindle nose: A 2 - 5 power: approx. 3.8 kW automatic longitudinal & plan vorschuebe: feed range: approx. 0.011 - 0.91 mm / Rev suitable for threaded: - metric 0.25 - 5.25 mm - inch 72-2 Gg / "- Diametral - Pitch thread - module tailstock: MK 3"

Accessories â?¢ 3 - bake - chuck Ã? 160 mm new â?¢ quick change Toolpost + 3 inserts â?¢ electric Chuck guard â?¢ work light â?¢ coolant system â?¢ complete machine documentation â?¢ emergency - off â?¢ drill Chuck for tailstock new â?¢ revolving spit Ze for tailstock new â?¢ various wrenches â?¢ feet â?¢ leit & spindle - cover (optional)

Accessories on request price and other specifications on request
1980
Price  
    request
125460443 1900

Electric Devices


Weight approx.: 400 kgDimensions (l x w x h) approx.: 1200 x 800 x 1500 mmDescription: Only contents of the rack, consisting of screw hole cutters, fuse switches, control cabinet screw connections, transformers, electric ...

 
Weight approx.: 400 kg
Dimensions (l x w x h) approx.: 1200 x 800 x 1500 mm
Description: Only contents of the rack, consisting of screw hole cutters, fuse switches, control cabinet screw connections, transformers, electrical connection cables, push-buttons, electromotors, for further details see photos
 
used machinery auction RESALE 105 €  
  DE   request
125465465 102

WEILER COMMODOR B TEILÜBERHOLT for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


L + Z lathe hamlet can B without -04-03-185 delivery: upon request number: 04-03-185 manufacturer: Weiler type: can B without . MACHINE data year: approx. 1990 L x W x H: approx. 2500 x 1200 x 1800 mm weight: approx ...
used machine
 
L + Z lathe hamlet can B without -04-03-185 delivery: upon request number: 04-03-185 manufacturer: Weiler type: can B without .

MACHINE data year: approx. 1990 L x W x H: approx. 2500 x 1200 x 1800 mm weight: approximately 1500 kg

Very good condition - without
(Click on without to see the extent of the overhaul)

TECHNICAL data digital display: 3 - axes - digital display new dimensions: Max turning diameter over bed: approx. Ã? 380 mm max turning diameter over support: approx. Ã? 190 mm maximum turning length: approx. 1000 mm bar passage: approx. Ã? 56 mm spindle: speed range: CA. 25 -. 2000 RPM spindle nose: Camlock D 1-8 drive power: approx. 7.5 kW automatic longitudinal & plan vorschuebe: feed range: about 0.011 - 0.80 mm / Rev suitable for threaded: - metric 0.30 mm - 10 mm - 80-2 3/4 inch Gg / "- Diametral - Pitch thread - 5.5 DP - 80" Module 0.2-5 live: MK 4 Accessories â?¢ 3 - bake - chuck Ã? 200 mm new â?¢ quick change Toolpost + 3 inserts â?¢ electric Chuck guard â?¢ work light â?¢ coolant system â?¢ complete machine documentation â?¢ emergency - off â?¢ drill chucks for REITs Tock new revolving tailstock tip â?¢ new â?¢ various wrenches â?¢ machine feet

Accessories on request price and other specifications on request
1990
Price  
    request
125459203 102

MORANDO KN 25 for sale
Vertical Turret Lathe - Double Column


faceplate diameter:2500 mmswing diameter:2700 mmturning height:2400 mmtable motor:80 kWtable rotation speed:1,24-112 U/mincross section of ram:250 x 250 mmTravel of Ram (vertical):1500mm und 1140 mmweight of the machine  ...
used machine
 
faceplate diameter:2500 mm
swing diameter:2700 mm
turning height:2400 mm
table motor:80 kW
table rotation speed:1,24-112 U/min
cross section of ram:250 x 250 mm
Travel of Ram (vertical):1500mm und 1140 mm
weight of the machine ca.:48 t
chip conveyor:
grinding attachment:2
Boring bar holder:
turret:
Rams:2 Stück CNC gesteuert
operator platform:

Standard accessories: Chips Conveyor & Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication in Guide way 4 Jaw Manual Chuck 1000mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Tower Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System installed options: Air Conditioner For Electrical Box Coolant Through Spindle Filter Of Coolant Water CE Mark Transformer
1971
Price  
    request
125465463 102

WEILER COMMODOR 750 TEILÜBERHOLT for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


L + Z lathe hamlet can 750 without -04-03-184 delivery: upon request number: 04-03-184 manufacturer: Weiler type: can 750 without . MACHINE data year: approx. 1985 L x W x H: approx. 2500 x 1200 x 1800 mm weight: ap ...
used machine
 
L + Z lathe hamlet can 750 without -04-03-184 delivery: upon request number: 04-03-184 manufacturer: Weiler type: can 750 without .

MACHINE data year: approx. 1985 L x W x H: approx. 2500 x 1200 x 1800 mm weight: approximately 1500 kg

Very good condition - without
(Click on without to see the extent of the overhaul)

TECHNICAL data digital display: 3 - axes - digital display new dimensions: Max turning diameter over bed: approx. Ã? 380 mm max turning diameter over support: approx. Ã? 190 mm maximum turning length: CA. 750 mm bar passage: approx. Ã? 56 mm spindle: speed range: approx. 25-2 000 rpm spindle nose: A 2 - 6 power: approx. 4,0 kW automatic longitudinal & plan vorschuebe: feed range: 0,026-1,253 mm / U suitable for threads: - metric 0.35 - 12 mm - inch 44-2 Gg / "- Diametral - Pitch threaded 88-5 DP - module 0.2-4"
Tailstock: MK 4 Accessories â?¢ 3 - bake - chuck Ã? 200 mm new â?¢ quick change Toolpost + 3 inserts â?¢ electric Chuck guard â?¢ work light â?¢ coolant system â?¢ complete machine documentation â?¢ emergency - off â?¢ drill Chuck for tailstock new â?¢ with ongoing tip for tailstock new â?¢ various wrenches â?¢ machine feet
K
Accessories on request price and other specifications on request
1985
Price  
    request
125456479 702

DIESSEL Rührwerk mit Heizung for sale
mixing machine include heating, fabr. Diessel,


approx. 30 l kg, bowl doublejacked \r\nelectric heating, bowl + mixer stainless steel\r\nheating element 3000 W\r\nmotor 220/380V //0,37 kW// variable speed 7,2 - 36 rpm

 
approx. 30 l kg, bowl doublejacked \r\nelectric heating, bowl + mixer stainless steel\r\nheating element 3000 W\r\nmotor 220/380V //0,37 kW// variable speed 7,2 - 36 rpm
 
Price  
    request
125465459 102

WEILER COMMODOR GEOMETRISCH ÜBERHOLT for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


L + Z lathe hamlet can geometric OVERHAULED -04-03-183 delivery: on request number: 04-03-183 manufacturer: Weiler type: overtaken can geometric . (Click on geometrically to see the extent of the overhaul) incl. certi ...
used machine
 
L + Z lathe hamlet can geometric OVERHAULED -04-03-183 delivery: on request number: 04-03-183 manufacturer: Weiler type: overtaken can geometric .
(Click on geometrically to see the extent of the overhaul) incl. certificates according to manufacturer guidelines incl. 12 month warranty on the geometry of the machine machine data year: Mint L x W x H: approx. 2500 x 1200 x 1800 mm weight: approximately 1500 kg

Geometric overhauled neuwertiger Zustand-

TECHNICAL data digital display: 3 - axes - digital display new dimensions: Max turning diameter over bed: approx. Ã? 380 mm max turning diameter over support: approx. Ã? 190 mm maximum turning length: approx. 1000 mm bar passage: approx. Ã? 56 mm spindle: speed range: approx. 2 5-2000 U/min spindle nose: A 2 - 6 power: approx. 4,0 kW automatic longitudinal & plan vorschuebe: feed range: approximately 0.022 8.20 mm / U suitable for thread: - metric 0.30 mm - 10 mm - 80-2 3/4 inch Gg / "- Diametral - Pitch thread 80-5.5 DP - module" 0.2-5 live: MK 4 Accessories â?¢ 3 - bake - chuck Ã? 200 mm new â?¢ quick change Toolpost + 3 inserts â?¢ electric Chuck guard â?¢ work light â?¢ coolant system â?¢ complete machine documentation â?¢ emergency - off â?¢ drill Chuck for tailstock N EU â?¢ revolving tailstock new tip â?¢ various wrenches â?¢ machine feet

Accessories on request price and other specifications on request
2017
Price  
    request
125447283 105

MEP Shark 332 CCS for sale
Bandsaw - Horizontal


cutting diameter: 300 mmsaw band length: 3320 x 27 x 0,9 mmcutting width: 320 mmcapacity 90 degrees: square: 260 mmcapacity 90 degrees: flat: 320 x 260 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: square: 250 ...
used machine
 
cutting diameter: 300 mm
saw band length: 3320 x 27 x 0,9 mm
cutting width: 320 mm
capacity 90 degrees: square: 260 mm
capacity 90 degrees: flat: 320 x 260 mm
capacity 45 degrees: round: 260 mm
capacity 45 degrees: square: 250 mm
Capacy 45°: rectangle: 270 x 200 m/min.
cutting speed: 40 / 80 m/min
total power requirement: 1,5 / 1,8 kW
weight of the machine ca.: 710 kg
dimensions of the machine ca.: 1,4 x 2,1 x 2 m
Condition: ready for operation:
Condition: very good:
Electric 380 Volt:
Cooling equipment:
Operation panel:
Manual miter saw with CCS system, that means autom. lowering of the
saw frame with regulation of the lowering speed via throttle valve and
end stop, pole-reversible motor with 2 cutting speeds.
The machine is in good condition because it was unused for a lon time.
Machine dealer with own stock of 2500 m² and certification of the database
Machineseeker.




This ad was created with MODUL MWS - the software solution of LogoTech.
2003
Price  
    request
125465451 102

GDW LZ 350 for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


L + Z lathe GDW LZ 350 04-03-176 delivery time: immediate number: 04-03 176 manufacturer: GDW type: LZ 350 MACHINE data year: approx. 1996 L x W x H: approx. 2000 x 1000 x 1600 mm weight: 800 kg Very good condition ...
used machine
 
L + Z lathe GDW LZ 350 04-03-176 delivery time: immediate number: 04-03 176 manufacturer: GDW type: LZ 350

MACHINE data year: approx. 1996 L x W x H: approx. 2000 x 1000 x 1600 mm weight: 800 kg

Very good condition - from government training workshop technical data digital display: 3 - axes - digital display Axesta Visuelesta 200 dimensions: Max turning diameter over bed: approx. Ã? 360 mm max. turning diameter over support: approx. Ã? 195 mm max Drehläng e: approx. 750 mm bar passage: approx. Ã? 38 mm spindle: speed range: approx. 45-2000 RPM spindle nose: A 2 - 5 power: approx. 2.4 kW automatic longitudinal & plan vorschuebe: feed range: approx. 0.017 1,096 mm / U suitable for threads: - metric 0.25-16 mm - inch 100-2 Gg / "- Diametral - Pitch thread 200 - 3 DP - module 0.2 - 8 live: MK 3 accessories â?¢ 3 - bake - chuck Ã? 200 mm Röhm â?¢ quick change Toolpost + 3 Inserts â?¢ complete machine documentation â?¢ coolant system â?¢ Chuck guard" Electric â?¢ various wrenches â?¢ bed fence â?¢ feet â?¢ emergency

Accessories on request price and other specifications on request
1996
Price  
    request
125442817 1518

AMROS 1250 D for sale
ride-on-sweeper Diesel


ride-on-sweeper with cabine and diesel-motor1 side-bruschsweeping-width 1,52 mtheor. capacity: 30.500 qm/hhydraulic high dumpworking hours: 1060 hmotor 50 HPspeed max. 20 km/helectric filter agitatorelectric starterSE-wh ...
used machine
 
ride-on-sweeper with cabine and diesel-motor
1 side-brusch
sweeping-width 1,52 m
theor. capacity: 30.500 qm/h
hydraulic high dump
working hours: 1060 h
motor 50 HP
speed max. 20 km/h
electric filter agitator
electric starter
SE-wheels

weight appr. 1810 kg
dimensions appr. 2480 x 1440 x 2030 mm
1990
Price  
  DE   request
125465439 102

WEILER COMMODOR GEOMETRISCH ÜBERHOLT for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


L + Z lathe hamlet can geometric OVERHAULED -04-03-147 delivery time: on request number: 04-03-147 manufacturer: Weiler type: overtaken can geometric . MACHINE data year: Mint L x W x H: approx. 2500 x 1200 x 1800 m ...
used machine
 
L + Z lathe hamlet can geometric OVERHAULED -04-03-147 delivery time: on request number: 04-03-147 manufacturer: Weiler type: overtaken can geometric .

MACHINE data year: Mint L x W x H: approx. 2500 x 1200 x 1800 mm weight: approximately 1500 kg

Geometric overhauled neuwertiger Zustand-
(Click on geometrically to see the extent of the overhaul) incl. certificates according to manufacturer guidelines incl. 12 month warranty on the geometry of the machine technical data digital display: 3 - axes - digital display new dimensions: Max. Turning diameter over bed: approx. Ã? 380 mm max turning diameter over support: approx. Ã? 190 mm maximum turning length: approx. 1000 mm bar passage: approx. Ã? 56 mm spindle: speed range: approx. 25-2000 RPM spindle nose: A 2 - 6 power (depending on availability): CA. 4,0 kW / 7,5 kW automatic longitudinal & plan vorschuebe: feed range: approx. 0.022 8.20 mm / U suitable for threads: - metric 0.30 mm - 10 mm - 80-2 3/4 inch Gg / "- Diametral - Pitch thread 80 - 5.5 DP - module 0.2 - 5 live: MK 4 Accessories â?¢ 3 - bake - feed" Ã? 200 mm new â?¢ quick change Toolpost + 3 inserts â?¢ electric Chuck guard â?¢ work light â?¢ coolant system â?¢ complete machine documentation â?¢ emergency â?¢ drill Chuck for tailstock new â?¢ revolving tailstock new tip â?¢ various chip nschlüssel â?¢ feet â?¢ electric bed slide - protection (optional) â?¢ L + Z - screw - cover (optional)

Accessories on request price and other specifications on request
2017
Price  
    request
125442575 1405

DEMAG DKUN 5-500 for sale
electric hoist DEMAG 1000 kg


1 used electric-hoist DEMAG DKUN 5-500 new in 2000 capacity: 1000 kg / 1 tolifting-height: 3 mlifting-speed: 4 m/minMotor: 400 V / 0.75 kW
used machine
 
1 used electric-hoist DEMAG DKUN 5-500 new in 2000

capacity: 1000 kg / 1 to
lifting-height: 3 m
lifting-speed: 4 m/min
Motor: 400 V / 0.75 kW

2000
Price  
  DE   request
125465434 102

WEILER CONDOR 81 GEOMETRISCH ÜBERHOL for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


L + Z lathe WEILER CONDOR 81 geometric OVERHAULED -04-03-144 delivery: upon request number: 04-03-144 manufacturer: Weiler type: Condor 81 geometric overhauled . MACHINE data year: Mint L x W x h: approx. 2000 x 100 ...
used machine
 
L + Z lathe WEILER CONDOR 81 geometric OVERHAULED -04-03-144 delivery: upon request number: 04-03-144 manufacturer: Weiler type: Condor 81 geometric overhauled .

MACHINE data year: Mint L x W x h: approx. 2000 x 1000 x 1700 mm weight: 800 kg

Geometric overhauled neuwertiger Zustand-
(Click on geometrically to see the extent of the overhaul) incl. certificates according to manufacturer guidelines incl. 12 month warranty on the geometry of the machine technical data digital display: 3 - axes - digital display new dimensions: Max. Turning diameter over bed: dia. 340 mm max turning diameter over support: approx. Ã? 185 mm maximum turning length: approx. 800 mm bar passage: approx. Ã? 42 mm spindle: speed range: approx. 30-2800 RPM spindle nose: A 2 - 5 power: approx. 3.0 kW automatic longitudinal & P lanvorschübe: feed range: approx. 0.016 - 0.50 mm / Rev suitable for threaded: - metric 0.18 - 28 mm - inch 80-1 Gg / "- Diametral - Pitch thread 200-2 3/4 DP - module 0.1-9 live: MK 3 accessories â?¢ 3 - bake - chuck Ã? 160 mm new â?¢ Schnellwechselstahlh" old + 3 inserts â?¢ electric Chuck guard â?¢ work light â?¢ coolant system â?¢ complete machine documentation â?¢ emergency â?¢ drill Chuck for tailstock new â?¢ revolving tailstock new tip â?¢ various wrenches â?¢ feet â?¢ SP annzangen - device (OPTION) â?¢ cover L & Z - spindle (OPTION)

Accessories on request price and other specifications on request
2017
Price  
    request
125442577 1405

DEMAG DKUN for sale
electric hoist 250 kg


1 used electric hoist DEMAG DKUN with trolley and trailing-cables capacity: 250 kglifting-height: appr. 3 mmotor: 400 V

 
1 used electric hoist DEMAG DKUN with trolley and trailing-cables

capacity: 250 kg
lifting-height: appr. 3 m
motor: 400 V
 
Price  
  DE   request
125465426 1107

VIESSMANN Vitobloc 200 EM-140 for sale
CHP Unit


Motor: MAN E 2876 E 312 Generator: Leroy-Somer Fuel type: Natural gas Electrical power: 140 kW Thermal power: 209 kW Hours of operation: Approx. 900 The unit is like new, was only used for test phase. All demage p ...
used machine
 
Motor: MAN E 2876 E 312
Generator: Leroy-Somer
Fuel type: Natural gas
Electrical power: 140 kW
Thermal power: 209 kW
Hours of operation: Approx. 900
The unit is like new, was only used for test phase.
All demage parts are reconditioned.
Test run was carried out.
2016
Price  
  DE   request
125401477 109

EMG for sale
Electric motors


Weight approx.: 150 kgDimensions (l x w x h) approx.: 1200 x 800 x 400 mmDescription: 12 units

 
Weight approx.: 150 kg
Dimensions (l x w x h) approx.: 1200 x 800 x 400 mm
Description: 12 units
 
Price  
  ES   request
125465422 102

WEILER COMMODOR TEILÜBERHOLT for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


L + Z lathe hamlet can without -04-03-139 delivery: upon request number: 04-03-139 manufacturer: Weiler type: can without . MACHINE data year: approx. 1990 L x W x H: approx. 2500 x 1200 x 1800 mm weight: approximat ...
used machine
 
L + Z lathe hamlet can without -04-03-139 delivery: upon request number: 04-03-139 manufacturer: Weiler type: can without .

MACHINE data year: approx. 1990 L x W x H: approx. 2500 x 1200 x 1800 mm weight: approximately 1500 kg

Very good condition - without

(Click on without to see the extent of the overhaul)

TECHNICAL data digital display: 3 - axes - digital display new dimensions: Max turning diameter over bed: approx. Ã? 380 mm max turning diameter over support: approx. Ã? 190 mm maximum turning length: approx. 1000 mm bar passage: approx. Ã? 56 mm spindle: speed range: approx. 25 -2000 Rev/min spindle nose: A 2 - 6 power (depending on availability): approx. 4,0 kW / 7.5 kW automatic longitudinal & plan vorschuebe: feed range: approx. 0.011 - 0.80 mm / Rev suitable for threaded: - metric 0.30 mm - 10 mm - 80-2 3/4 inch Gg / "- Diametral - Pitch" Thread 80 - 5.5 DP - module 0.2 - 5 live: MK 4 Accessories â?¢ 3 - bake - chuck Ã? 200 mm new â?¢ quick change Toolpost + 3 inserts â?¢ electric Chuck guard â?¢ work light â?¢ coolant system â?¢ complete machine documentation â?¢ emergency - off

â?¢ Drill Chuck for tailstock new â?¢ revolving tailstock new tip â?¢ various wrenches â?¢ machine feet

Accessories on request price and other specifications on request
1990
Price  
    request
125401258 107

STANKOIMPORT ND 3318 for sale
Plate Shear - Mechanical


plate width: 2000 mm plate thickness: 6,3 mm distance between columns: 2280 mm cutting angle - upper blade: 1°30` ° back gauge - adjustable: [...] manuell mm number of cutting strokes max.: 60 Hübe/min height over flo ...
used machine
 
plate width: 2000 mm
plate thickness: 6,3 mm
distance between columns: 2280 mm
cutting angle - upper blade: 1°30` °
back gauge - adjustable: [...] manuell mm
number of cutting strokes max.: 60 Hübe/min
height over floor: 900 mm
voltage: 380/50 V / Hz
total power requirement: 11,8 kW
Weight approx.: 4,3 t
space requirement of the machine approx.: 3,0x0,7x1,55 m
crank guillotine shears
continous + single stroke possible
driven by electric motor
down (force = 940kp) with guard
limit stop behind the blades = 600mm
table dimensions: from left to right = 3250m
1987
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

CHP Unit Viessmann Vitobloc 200 EM-140


Motor: MAN E 2876 E 312 Generator: Leroy-Somer Fuel type: Natural gas Electrical power: 140 kW Thermal power: 209 kW Hours of operation: Approx. 900 The unit is like new, was only used for test phase. All demage parts are reconditioned. Test run was carried out.

Diesel engines MWM DEUTZ TBD620V12


2 COGENERATION ENGINES: 2 X MWM-DEUTZ V12 TBD620 YEAR OF MANUFACTURE: 1999 HOURS: approx. 9000 OUTPUT: 1.3Mw ALTERNATOR: LEROY SOMER OUTPUT: 1260 KW / kVA 1300 COMPLETE PLANT •Generator (alternator, engine engine and PLC) •Gas train •Water cooling system (heat exchanger + complete pump) •Oil Cooling System (heat exchanger + complete pump) •Control Panels generator (DIANE) •Electrical control panel accessories (pumps, etc) •Technical Documentation

Injection molding machines sumitomo japan ( electirc SE130EV-C360HP


WE HAVE SUMITOMO FULL ELECTRIC 130TON AS FOLLOWS INFORMATION. 1. MODEL: SE130EV-C360HP 2. Q'TY: 2 UNITS ( ONLY MACHINE ) 3. MFG.YEAR 2013 APR. 4. SCREW DIA. 25MM 5. ORIGINAL MACHINE NAME PLATE. PLS. CONTACT GJCHOI OF GNB IN KOREA

Self-Cleaning Disc Separators Alfa-Laval BRPX 417


BRPX 417: high speed vertical disc centrifuge Made from stainless steel for the food and beverage industry. Approximate capacity: 10000 liter/hour The bowl is mounted on a vertical spindle driven by a vertically mounted motor, via a belt drive ELECTRICAL CABINET AVAILABLE 2 UNITS AVAILABLE

Granulating mills PREVIERO MU-710 P.R.


PREVIERO GRINDER TYPE MU-710 PR complete with conveyor belt and metal detector closed rotor Grinding chamber : mm.1000 x770 Feeding hopper : 1170 mm x 900 mm 160 kW Motor 6 knives on rotor + 2 knives on stator grid with 14 mm drilling Inspection door for knives replacement Output 2000/2400 kg / h depending on material and grid Electric cabinet Offered completetely reconditioned in 2018 Construction year 1989

Zirkon Supra 660


Zirkon Model Supra 660 4 color Year: 1990 Cutoff: 452mm Max speed: 42.000 p/h 1 Enkel reel stand with reel travers 1 Infeed with web guide control 4 Zirkon printing-units with Baldwin alcohol damping and Baldwin blanketwashing 1 Dryer MEG Sigma plus year: 1997 1 Chillstand with webguide and silicon 1 JIMEK Perforater unit 1 superstructure with turnerbars and slitting knives 2 Zirkon folders with one chopper folder and one double chopper 1 Planatol gluing system even crossgluing Bcdjekyxh3 1 Quadtech RGS 4 register controll 1 Quadtech cutoff control 2 Gämmerler trimming RS 92 2 Gämmerler bumpturn 1 IVT tempcontrol ink vibrator, chill roller, alcohol mixer 1 IVT ink distrubition with 4 pumps for ink container connection 2 Color Control pults remote ink 1 Machine Controll pult 1 plate bench and punch Full documention: electrical,mechanical and other manuals! Perfect for 8 page A4 or 16 page A5! Single production or double production 4 page A4 or 8 page A5. We ship worldwide.

Punching Machines Trumpf Trumatic 3000R-1300


Type || Punching machine Manufacturer || Trumpf Model || Trumatic-3000R 1300 Year of Manufacturing || 2004 Control || Siemens Sinumerik 840D Electrical Consumption | 18 kW | Available for Delivery || IMM Max. Tonnage | 18 t | Max. Capacity | mm | 6.4 X Axis Travel | 2,550 mm | Y Axis Travel | 1280 mm | Y Axis Velocity | mm/90/60 min | Function Multi Tool Function Threat Forming Function Engraving Function Multi Share Function Multi Bend Set of cassettes and used tools

Laser Cutting Machines Amada FO 4020


Type || CO2 Laser Cutter Manufacturer || Amada Model || FO 4020 Year of Manufacturing || 2005 Serial Number || 37004247 Length | mm | 7500 Width | mm | 3200 Height | mm | 2400 Weight 1400 kg | | Electrical || 400 v, 50 Hz Available for Delivery || Immideatly

Boring Mills TOS Varnsdorf W9


Horizontal boring machine W9 TOS Varnsdorf K.102259 Diameter of working spindle mm 90 Depth of working spindle mm 710 Vertical spindle adjustment mm 900 (1120) Spindle speed: number of degrees 21 range min-1 14-400 Spindle speed with removable faceplate number of degrees 18 range min-1 28-1400 Speed of the face plate number of degrees 12 range min-1 14-180 Working feeds: 18 degrees in the mm / rev range 0.016-0.8 18 degrees in the range of mm min-1 12.5-600 Micro-axis mm min-1 5 Rapid traverse mm min-1 2400 Threads: 18 metric with pitch mm 0.25-12 24 Whitworth threads / 1 "120-2 Electric motor kW 7.5 Machine dimensions: length mm 3900 (4750, 5120) width mm 2500 (2600) Height mm 2650 (2875)

Hydraulic Presses PHM 63 PHM 63


Hydraulic presses PHM 63. Characteristic data of the press PHM 63:-force pressing: 63 t -the strength of open: 33 t -stroke: 300 mm -closing speed: 136 mm/s. -Ironing speed: 4.3 mm/s. -opening speed: 122 mm/s. -cylinder bottom przet?ocznik, ejector -the power of przet?oku/discard: 16 t -the strength of return: 10 t -speed of the pumping/discard: 13 mm/s. -the speed of return: 21 mm/s. -the clearance between the tables: 600 mm-dimensions tables: 500 x 500 mm -fixing form/cross-slots for screws: M20 -tank capacity: 150 l/dm3 -measured oil temperature in the tank should not exceed: 45 degrees C -electric motor: 4 kW -maximum pressure: 320 kG/cm2, 32 MPa -low pressure: 25 kG/cm2, 2.5 MPa -supply voltage: 3 x 380/220 V -dimensions (l x w x h): 710 x 1580 x 2200 mm -net weight: 2100 kg

Plasma cutter ECKERT JANTAR 2


Plasma cutter ECKERT JANTAR 2 was built in 2008. The basic technical data cutting ECKERT JANTAR 2:-working width with 2 suportach burners: 2000 mm -cutting length: 6000 mm -the length of the road: 5000 mm -passage speed: 0-20000 mm/min. -cutting thickness (with one burner HARRIS): 100 mm -the type of flammable gas: propane, acetylene, APACHI, natural gas -format programming: ESSI -positioning accuracy: 0.05 mm -supply voltage: 50 Hz/230V/+-5% Part of the basic equipment cutting device JANTAR-2 includes: -computer control system CNC ECS 859:1 PCs. -torch cutting nozzles HARRIS: set of 3/palnik -Central gas Splitter: 1 PCs. -beam portal with guides on the gas hoses and electric cables: 1 set. -the longitudinal rails made of roadway (2000 mm cutting workspace): 1 set. -drive unit wzd?u?my (double-sided): 1 set. -drive unit: 1 set.

Electric discharge drill - a puncher for holes BAOMA BMD 703


With drill-electric boring machine for hole BMD 703 was produced in 2007. The drill is new, unused. Technical data of the machine BMD 703: -the maximum drilling depth: up to 400 mm -diameter of (drilled) hole: fi 0,5-4 mm -working table dimensions: 400 x 320 mm -height, material thickness: 270 mm -burning time (drill) hole with a diameter of 1 mm, depth 100 mm: approx. 3 min. -power supply: 380 V, 50 Hz

Bottom-spindle copy moulders GRIGGIO T200


Spindle moulder GRIGGIO model T200 with: -side tenoning carriage -extended plane in entrance -adjustable casing, with Aigner fences -feeder at 4 wheels -top suspended electric box

Vertikal Turning Machines (Lathes) ?KD BLANSKO SKJ 50-100


Producer ..... CKD BLANSKO - OS Year manufacture/Year overhaul ..... 1993 / 2006 Control system Siemens ..... Sinumerik 840 D Max. diameter of workpiece ..... 10000 mm Clamping diameter of rotary table ..... 4770 mm Max. workpiece height ..... 4240 mm Max. load of table ..... 100 000 kg Machine weight ..... 121000 kg Machine dimensions l x w x h ..... d 15910 x š 10600 mm retrofit 2006 - Siemens 840D CNC system - C axis: conversion for use with boring and milling tools - new drives - new electricity (switchboard, ...) - new central lubrication - CAPTO clamping milling head: 1.000 U/min chip conveyor

CNC GRINDER FOR ROLLERS TSCHUDIN GRENCHEN HTG 342


CNC cylindrical grinder TSCHUDIN GRENCHEN HTG 22 E14 342 type was produced in 1987. In 2008 he underwent a modernisation, which lists: -numerical control system -servo axis -adjustable spindle drive -all electrical equipment: contactors, overload switches, buttons, etc. Technical data: -grinding length: 230 mm -the maximum diameter of grinding: fi 170 -the maximum diameter of the dial: fi 500 mm CNC grinder for shafts TSCHUDIN GRENCHEN HTG 22 E14 type 342 has used Siemens ET200S and servo drives STOEBER.

Injection molding machines Sumitomo electric 130ton SU1300EV-C360HP


WE HAVE SUMITOMO FULL ELECTRIC , MODEL: SU-130EV-C360HP SCREW DIA. 28MM, WE HAVE 4 UNITS, MFG.YEAR 2013 APR. IT IS KEEPING THE GOOD CONDITION. CONTACT GJCHOI OF KOREA

Sumitomo ele two color130 SE130DU-CI


We have sumitomo full electric two color injection molding machine, tonage 130ton. mfg.year 2012. Screw dia. 28mm / 28mm It is under the working conditons contact gjchoi of korea

Injection molding machines Sumitomo electric 130ton SE 130-D


WE HAVE SUMITOMO FULL ELECTRIC MODEL SE-130D SCREW DIA. 28MM. THESE MACHINES HAVE BEEN USED AT THE CLEAN ROOM AND THE KEEPING CONDITION IS GOOD. WE HAVE TOTAL 3 UNITS. YOU CAN SEE AND CONTACT GJCHOI OF GNB IN KOREA

Double Miter Saws Abcd Machinery 2015


SELECTA 3 - Double head cutting off machine Home / ABCD Machinery – Machines for processing Aluminum Steel and PVC / SELECTA 3 – Double head cutting off machine SELECTA 3 High quality double head cutting off machine with a fixed sawing head on the left and automatic right head movable by numeric control with upstroke blades. Rotation and tilting of both blades for compound cuts. Brushless motor for the positioning of the movable head. Automatic pivoting inwards/outwards heads by brushless motor 22,5°90°-140°. Automatic tilting range inwards of the saw blades 90°-45°, with 2 TCT Saw blades Ø600mm. Motor power 3Kw each, lubrication by micro drop with pure oil, full protections, cutting areas with automatic raising/closing safety head, kit vertical pneumatic clamps, software of the machine completely graphical-colour display Touch screen video. 17’’Wide extension thanks to the gates RJ45-USB it allows the possibility to manage different typologies of windows with image memory for direct use. Ethernet connection to the main office or with other programs or connections with other CNC machines. Possibility of tele-assistance via . CUTTING LENGTH 6 MT. STANDARD EQUIPMENT Unlimited memorizing of cutting lists via keyboard, USB key Management expanding capacity of cut on length Management reducing capacity of cut on length Auto-feed and cut off saw (point to point) Movable roller table support with vertical stop 4x vertical pneumatic clamps Electric device for connecting motorized belt conveyor Electric device for connecting industrial vacuum Lubrication by micro drop with pure oil Full protections cutting area 2x TCT Saw Blades Ø600mm MACHINE JUST USED 3 MONTHS. PERFECT CONDITION. 5*AXIS CONTROLLED.

Book cover manufacturing machines Muller Martini 1509


Automatic saddle stitcher model 1509, Year 1996 - Three double feeders model 1516 L 5 max paper size 380x305 mms. - Min paper size 145x100 mms., Max speed 7.500 copies/hour - Two stitching heads, Air pump Rietschle 100 m3 - Three knife trimmer model 890/217 with many spare knives, copy counter, short delivery - All manuals and electric diagrams, many spare parts and accessories - Without damages, immediately available in stock, all photos attached

Veneering presses ORMAMACCHINE P.F/1


Code: 0362 Brand: ORMAMACCHINE Model: P.F/1 Cold press Platens dimension mm 2500 x 1300 Opening mm 500 Electric platen lifting Thrust tonn 15 Overall dimensions: mm 2850 x 1450 x 1950 h Weight kg 1000

Sheet-metal-stamping trimming press Voronezh KV2536,400T


Maximum force ton-force 400 Slider stroke length mm 250 Slider stroke length to lower position mm 12 Slider strokes per minute 25 Number of single turn-on 19 Maximum distance between table and slider (in lower position of slider) mm 510 Adjustment mm 160 The sizes of a under-forginig plate mm 1000 Table overall dimensions: mm - from front to rear 1000 - from left to right 1000 The sizes of an aperture in a table mm 630 Slider overall dimensions mm 800 x 800 window dimensions in cheeks mm 600 Total power of electric motors kW 43,3 Press overall dimensions mm - length 3470 - width 3140 - height 5940 Press weight without hydropneumatic pillow kg 31 400

Eccentric Presses ZAMECH PMS 160 A


Eccentric press ZAMECH PMS 160 and produced in 1965 by Zamech-. Characteristics of the press PMS 160 and: -nominal pressure: 160 t -table dimensions: 1140 x 760 mm -thickness: 125 mm -the diameter of the hole in the table: 490/450 mm-diameter hole in the plate: 250 mm -diameter of the socket in a slider: 50 mm -the ground clearance between the walls of the body: 840 mm -adjustable slider jump in gran. : 20-140 mm -the nominal quantity: 40 1/min -outreach to table height: 400 mm -the largest distance between the table and the slider, with the largest jump the slider in the upper position and first engages a: 580 mm -the distance between the table and the guides: 585 mm -the self-alignment capacity of slider in the direction of the axis: 120 mm -electric motor: main: 10 kW, for setting the slider: 1.1 kW -the turnover of the main electric motor: 1420 RPM -the power of air pressure ejector 5.4 atm.: 16000 kG -the biggest jump ejector: 75 mm -indicative cooling air flow: 1.3 Nm3/min -the air pressure in the odci??aczach: 4.8 atm. -maximum air pressure in wyrzutniku: 5.7 atm. -nominal air pressure in the clutch: 4.5 atm. -the weight of the ejector: ok. 400 kg -the weight of the press without ejector: ok. 14100 kg -overall dimensions: 2000 x 2325 x 3390 mm

Laser Cutting Machines Bystronic Bystar 3015


Well maintained and clean Good running Manufacturer||Bystronic Model||Bystar 3015 Year of Manufacturing|| 2002 Serial Number||K011439 Available for Delivery||Immideatly Laser Type||CO2 Laser Power|W|4000 Working Area|mm|3000 x 1500 Electric/Resonator/Beam|H|64500/Current turbine 28500/25700 Byloader

Self-Cleaning Disc Separators Alfa-Laval BRPS 617


Stainless steel construction. Max bowl speed 4900RPM, . Clarifier design, centripetal pump liquid discharge. It is used for removing suspended solids with particle sizes from approximately 0.5 to 500 ?m from a liquid having a lower specific gravity than the solids. The solids content in the feed is normally in the range of 0.1-10 % by volume, but can vary between different duties 37KW DRIVE MOTOR , BELT DRIVE ELECTRICAL CABINET AVAILABLE

Folding machines HORIZON AFC A43


2 pocket vacuum suction fed folder with electric cross knife MIN SIZE 150x210 MAX SIZE 430x650 PAPER mm/40-240 gr/m2 Min. fold: 65 mm

Air Compressor Atlas Copco ZR 315 VSD bar, 50.2 m3/min Variable Speed Drive, 255 kW


Air Compressor Atlas Copco ZR 315 VSD The compressor is water cooled and totally oil free two stage screw compressor with inter- and after coolers. This compressor has energy saving speed control (VSD) for airflow airflow and it has been manufactured by Atlas Copco Belgium in year 2007. The equipment is a sound canopy and it is controlled with advanced Eletronikon 4 control system. The unit is still installed and in good condition. Technical data Manufactured by: Atlas Copco Belgium Type compressor: ZR 315 VSD Made in year: 2007 Estimated operation hours: 43000 Capacity (FAD): 50.2 m3/min at 8.6 bar Electric motor: 255 kW Shaft speed: 2430 rpm Main dimensions compressor: W x H x L 3.15 x 2.00 x 1.65 m Weight compressor: 4710 kg

E Motor 315 KW EN motoren, Nijmegen Holl AC motor


Used 3 tree -phase electric motor,alternative current315KW for driving industrial equipment

Steam Boiler BIB Cochran Wee Chieftain Steam Boiler


Make: BIB Model: Cochran Wee Chieftain Year: 2007 Condition: Used Machine type: Other Location of machine: United Kingdom Machine Details Steam Boiler Manufacturer BIB COCHRAN,United Kingdom Model Wee Chieftain YOM 2007 Construction standard BS2790-1992 Class 1 Fuel type Oil and Gas Maximum heat input 2820 kW Maximum Continuous Rating 4500 kg/hr Design Saturation Temperature 188 degC Working pressure 6,9 Bar. Design pressure 11 Bar. Hydraulic test pressure 16,5 Bar. Boiler capacity 7900 Litres Control Circuit 220 V Electrical Supply 380 V 3ph 50Hz Inspection history available. This steam boiler is in very good condition, worked for 4 years only. It is sold together with controlling equipment.

Universal Tool-Milling Machines DECKEL FP1 AKTIV DIGITAL


DECKEL FP1 Active Nr 2102-2139, year of manufacture: 1982: -3 axis digital read out HEIDENHAIN TNC 113, résolution 0.005 mm, -Manual strokes X : 300 ; Y : 160 ; Z : 340 [mm], -Automatic strokes X : 290 ; Y : 160 ; Z : 330 [mm], -Sensitive drilling head type 2171 - stroke 100 [mm] - spindle ISO 40 - orientable -90° / 0° / +90°, -Horizontal spindle ISO 40, -Tilting swiveling table type 2114, -Horizontal table dimensions : 600 x 255 [mm], 5 T slots 12 [mm] -Vertical table dimensions : 605 x 195 [mm], 2 T slots 12 [mm], -16 different spindle speeds from 40 to 2000 [tr/min], -Variable power feeding from 5 to 500 [mm/min] in all 3 axis, -Rapid feeding in all 3 axis - 1200 [mm/min], -« Active » function controled by the HEIDENHAIN TNC 113 DRO in all 3 axis, Bcblv9kxbw -Coolant pump + LOC LINE coolant hose, -Centralised automatic lubrication, -Spindle electro-brake, -Electrical cabinet seperated from the machine, -Main motor power 2.0 kW, -Dimensions : Width 1200 ; depth 1100 ; height 1700 [mm], -Weight : 695 Kg approx. Original DECKEL operators manual, service manual and electric plans included. Machine in very good condition, visible under power. Loading included, shipping possible Worldwide. Price VAT Excl. on request. SARL Kraffter Lieu dit Le Sourd 73520 Saint Béron, FRANCE Tel: +33(0)6-73-30-03-87 VAT N°: FR 17 819 707 167

Jelly sprayer Boyens Jelly Sprayer 300


Condition: New Technical data: • overall dimensions 660x470x950 mm; • electric power 230V / 50Hz / 16 Amp; • gel suction tube; • digital temperature and pressure setting; • two heated spray hoses; • castors; • purpose for liquid spray gel; • weight 110 kg.

Automatic transfer press AIDA FT2-40


Effort between stands 400 tons Number of positions incl. cutting position - 7 Maximum force at each pos. - 150 tons Number of strokes of the slider 8-12 Stroke 800 mm. The dimensions of the holder are 690 x 1150 mm. hickness of bolster plate: 250 mm Dimension of bolster plate: 4200x1400 mm The height of the press 7400 mm. (Max) Power of the main electric motor 110 kW Power supply 380V Working air pressure 5 kg / cm2 Documentation available. Weight 165 tn

CNC Pressbrakes BYSTRONIC PR 150 IPC


Bending Length: 4100 mm System: MODEVA 12 6 axes: 590, 500, 250, 250, 150, 1000, 500 mm. Pressing force: 150 ton Stroke: 265 mm Daylight 550 mm. Closing speed: 200 mm/s Engine power: 11 Kw Electric voltage: 400 V Air Pressure: 8 bar

Komori L 420


-Four colours STRAIGHT machine max size 37x52 cms. -Year 2008, Only 17 mil. impressions -Komorimatic continuous alcohol dampening with refrigerated recirculation system with alcohol metering -Komori Plate Changer: Semi-automatic plate changing -Densitometer PDC-lite: Scanning density control system -PQC control system- Control panel with touch screen built on delivery: ink zones, all registers and dampening remote controls, cocking -All automatic washers, Double size diameter of impression and transfer cylinders -All chromed cylinders: plate, blanket and impression -Powder sprayer, Max speed 13.000 sh/hour -Stream feeder with low pile delivery -Envelope feeder -All manuals, electric diagrams, tools and accessories

Cutting-To-Length Lines FIMI


band width 100 – 1.300 mm band thickness 0,30 – 3,00 mm tensile strength (until 2,2 mm thickness) max. 1.000 N/mm² yield strength (until 2,2 mm thickness) max. 820 N/mm² tensile strength (until 3,0 mm thickness) max. 800 N/mm² yield strength (until 3,0 mm thickness) max. 650 N/mm² elongation max. 20 % coil weight max. 30,0 t coil inside – Ø 508 / 610 mm coil outside – Ø 600 – 2.100 mm sheet length 250 – 3.000 mm package weight max. 5.000 kg package height incl. palette max. 560 mm inlet speed 15 m/min. working speed max. 90 m/min. pass line height app. 1.100 mm working direction left ? right the line consists of: stocking ramps for 2 coils min. coil outside diameter 900 mm entry coil car centering device decoiler motorized mandrel – Ø 508 / 610 mm press roll motorized outboard bearing Support coil opener telescopic press roll strip centering device crop shear – hydraulically scrap box transfer table leveler 6 HI 2 cassettes with leveling rolls cassette 1: no. – leveling rolls 19 leveling roll diameter 43 mm cassette 2: no. – leveling rolls 19 leveling roll diameter 52 mm no. – back up rolls 5 sets, upper and lower cassette quick change device felt cleaning device tachometer wheel pinch roll at shear entry rolls driven by DC motor rotary shear VECTRONIC pinch roll driven by AC motor strip belt conveyor at the VECTRONIC shear exit place for oiling machine (customer’s supply) sheets conveyors to scrap carriage and stackers deflecting conveyor with 3 positions scrap box movable by AC geared motor scrap carriage for scrap length of max. 1.100 mm connecting conveyor to stacker 1 connecting conveyor to stacker 2 automatic stacker units: stacker 1 non-stop operation for sheets up to 3.000 mm length stacking with wooden pallets stacker 2 non-stop operation for sheets up to 3.000 mm length stacking with wooden pallets lifting stacking platforms 2 pieces for sheets up to 3.000 mm length hydraulic hydraulic oil pressure 120 bar pneumatic normal compressed air pressure 6 bar electric three phase voltage 380 ± 10% V, 50± 2 Hz auxiliary voltage 220 ± 10% V, 50± 2 Hz solenoid valve voltage 24 V DC. total power consumption 480 KVA

Steam Boiler BIB COCHRAN (UK) Wee Chieftain


Construction standard BS2790-1992 Class 1 Fuel type Oil and Gas Maximum heat input 2820 kW Maximum Continuous Rating 4500 kg/hr Design Saturation Temperature 188 degC Working pressure 6,9 Bar. Design pressure 11 Bar. Hydraulic test pressure 16,5 Bar. Boiler capacity 7900 Litres Control Circuit 220 V Electrical Supply 380 V 3ph 50Hz Inspection history available. This steam boiler is in very good condition, worked for 4 years only. It is sold together with controlling equipment. Price 27000 EUR FCA Lithuania

Cooking kettles and dwarf boilers Spako KWRK150


Product number: 1258 Type: KWRK150 Capacity: 150 liter Heating: electric Dimensions: 1420 x 1000 x 1180 mm With agitator

Vertikal Turning Machines (Lathes) Stanko Ø8000 x 3240 x 125 T


Technical characteristics. The largest diameter of the workpiece - 8000 mm The greatest height. workpiece - 3240 mm The diameter of the disc table - 7100 mm The biggest shift sliders rests vertical (right and left) - 2000 mm The highest levels of vertical travel of the slides (right and left) - 4400 mm Mileage axis slider slides off the center of the shield handle - 150 mm Vertical rotation angle bracket right - -15 ° - 30 ° Vertical rotation angle bracket left (combined) - -15 ° - 30 ° Sliding horizontal slider bracket side - 1250 mm Vertical travel of the slider carriage side - 2,800 mm Maximum weight of the workpiece at a speed table to 15.5 rev / min - 125 tons Maximum weight of the workpiece at any speed - 63 tons The speed range of the table - 0.23 - 19,3obr / min * The largest total cutting force - 160 kN The biggest moment of cutting - 400 Nm Range of feed carriages vertical and horizontal - 0.0352 - 275mm / min The feed rate accelerated sliders and carriages - 2400 mm / min The speed of the beam - 300 mm / min Main engine power - 25 kW Lifting capacity of the crane - 75 ton Suport combined (slide left) Boring spindle diameter - 125 mm Spindle stroke - 1000 mm Maximum torque of the spindle - 3500 Nm Spindle speed n - 20 - 650 r / min Number of degrees of speed spindle - 16 Max-min vertical feed spindle - 0.0352 - 215mm / min The rate accelerated feed spindle - of 2400 mm / min Shift the slider to slide in the y-axis - 2000 mm Feed range slider and bracket Min - 0.0352 mm / min Max - 285 mm / min The feed rate accelerated slider and slide - 2400 mm / min The greatest strength of the cutting blade when running from the front bracket L <= 1000 mm - 80 kN L <= 1700 mm - 50 kN L <= 2300 mm - 30 kN The extreme angles of rotation slide - -15 ° - + 30 ° The electric motor drive main spindle - 10 kW Max spindle feed force - 30 kN Cone Size spindle DIN 2080 - Metric 80

CNC Boring Mills TITAN PAMA AFP 200


TYPE AFP 200 CNC – PAMA LICENCE - MACHINE TECHNICAL SPECIFICATION - Boring spindles diameter: 200 mm - Boring spindles taper: ISO-50 - Boring spindles speed: 1500 rpm - Main motors power: 100 kW - Rams section: 530 x 600 mm - Max. machining length: 19200 mm - Column 1 max. travel (X1 axis): 12800 mm - Column 2 max. travel (X2 axis): 12800 mm - Headstock 1 travel (Y1 axis): 4000 mm - Headstock 2 travel (Y2 axis): 5000 mm - Boring spindle travel (Z axis): 1100 mm - Ram travel (W axis): 900 mm - Travel Z + W: 2000 mm - Feeds on X, Y and Z axis: 0 – 8.000 mm/min - Feed on W axis: 0 – 6000 mm/min - Approx. weight without fix and rotary tables is about 210 t NOTE: 1. The max working extension of Z axis without ram (W axis) is 1100 mm. 2. The machine will work as a tandem unit and totally independent columns as well. STANDARD EQUIPMENT: - GE FANUC 16i-MB CNC - GE FANUC servo / spindle motors and drives - HEIDENHAIN linear measuring system on X, Y axis; - HEIDENHAIN rotary encoder on W axis; - GENERAL ELECTRIC, TELEMECANIQUE and EUROGI electrical equipment - ATOS, MP FILTRI, MARZOCCHI hydraulic equipment - METAL GENNARI telescopic covers on X axis - METAL GENNARI chip conveyor - Universal milling head (manual) type TU-80 – 2 pcs. - Fix tables 6000x2000 mm – 6 pcs. - Displaceable rotary table type MRD 3000x3000/2500 mm (60 tones) – 1 pc. - Displaceable rotary table type MRD 2000x2400/2500 mm (30 tones) – 1 pc

CNC Boring Mills TITAN PAMA AFP 200


TYPE AFP 200 CNC – PAMA LICENCE - MACHINE TECHNICAL SPECIFICATION - Boring spindles diameter: 200 mm - Boring spindles taper: ISO-50 - Boring spindles speed: 1500 rpm - Main motors power: 60 kW - Rams section: 530 x 600 mm - Max. machining length: 19200 mm - Column 1 max. travel (X1 axis): 12800 mm - Column 2 max. travel (X2 axis): 12800 mm - Headstock 1 travel (Y1 axis): 4000 mm - Headstock 2 travel (Y2 axis): 6200 mm - Boring spindle travel (Z axis): 1100 mm - Ram travel (W axis): 900 mm - Travel Z + W: 2000 mm - Feeds on X, Y and Z axis: 0 – 8.000 mm/min - Feed on W axis: 0 – 6000 mm/min - Approx. weight without fix and rotary tables is about 210 t NOTE: 1. The max working extension of Z axis without ram (W axis) is 1100 mm. 2. The machine will work as a tandem unit and totally independent columns as well. STANDARD EQUIPMENT: - GE FANUC 31i-MB CNC - GE FANUC servo / spindle motors and drives - HEIDENHAIN linear measuring system on X, Y axis; - HEIDENHAIN rotary encoder on W axis; - GENERAL ELECTRIC, TELEMECANIQUE and EUROGI electrical equipment - ATOS, MP FILTRI, MARZOCCHI hydraulic equipment - METAL GENNARI telescopic covers on X axis - METAL GENNARI chip conveyor - Universal milling head (manual) type TU-80 – 2 pcs. - Fix tables 4000x2000 mm – 12 pcs. - Displaceable rotary table type MRD 3000x3000/2500 mm (60 tones) – 1 pc. - Adapter L600mm pcs.2 - Universal milling head 20kW – pcs.2

Air Compressor 40 bar Atelier Francois Atelier Francois, Belgium CE46B, 40 bar


Air Compressor 40 bar Atelier Francois CE 46B Very good condition Atelier Francois CE46B which has FAD 1320 Nm3/h made in year 2011 . This compressor was installed in 2012 (manufacturing year 2011) and operation was stopped in 2015. This unit has frequency controlled speed so it can be adjusted to any capacity up to maximum capacity. Technical data Manufacturer: Atelier François, Belgium Compressor type CE46B Manufacturing year 2011 Capacity FAD 1320 m3/ hour Discharge pressure 40 bar Rotation speed 500 rpm Electric motor 250 kW /400V / 50 Hz frequency controlled

Chiller Cooling Stations YORK - GRAM York - Gram, 2 units cooling capacity 354 kW


YORK 708 kW Chiller Cooling Stations Liguid cooling compressor package which includes two idential units of York cooling compressors with all auxilliaries, electrical and control cabinets. This station was stopped in full operational condition in begining of year 2018 Both units include the following main equipment • Cooling compressor York HC 8125A with cooling capacity 354 kW • Plate Heat Excanger / Evaporator type M10 • Liquid separator GHEA • Oil separator Sabroe Techncial specifications of main equipment Cooling compressors Manufacturer: YORK – GRAM Compressor type 2 units of HC8125A Year 1999 Operating hours Approx 52000 / unit Refrigerant type R717 (NH3) Refrigerant capacity 30 kg / unit Number of units 2 Electic motor 2 x 110 kW Compressor speed 1 120 rpm Power supply 3x400 V/3/50 Hz Power steps 4 steps Cooling Capacity 708 kW Evaporation temperature -12C Condensation temperature +36C Secondary reagent Water / Glycol Concentration 25-30% Reagent incoming temp -2C Reagent exit temp -8C ALFA LAVAL plate heat exchanger for YORK station Manufacturer: Alfa Laval Manufacturer’s type: M10 – BWFDR Manufacturing year: 1999 Capacity: 43,5 Liter Pressure 25,00 bar Operating temp. 20/120 C // - 10/70 C Technical condition: Liquid Separator Manufacturer: GHEA Manufacturer’s type: 0519R Year 1999 Capacity 425 liter Working Temp. Min -40/Max - 50C Working pressure 28,6 bar Oil Separator Manufacturer SABROE Refrigerant. Type OVUR 4107 D Year: 2000 Operating pressure 26,00 Bar

Chiller Cooling Stations YORK - GRAM x 354 kW York HC 8125A


YORK 2 x 354 kW Chiller Cooling Stations Station has two idential units of York cooling compressors with all auxilliaries, electrical and control cabinets. Both units were stopped in full operational condition in begining of year 2018 Both units include the following main equipment • Cooling compressor York HC 8125A with cooling capacity 354 kW • Plate Heat Excanger / Evaporator type M10 • Liquid separator GHEA • Oil separator Sabroe

Accumulation Table Hartness International Dynac 7100 floor level, mass flow system


Accumulation Table Hardness Dynac 7100 This large accumulation table was made by Hartness International in year 2008. The model 7100 DYNAC a floor level, mass flow accumulation system for variety of container formats including plastic, glass, and aluminum. Dynac provides pressure less accumulation and will improve the throughput and efficiency of high speed packaging lines. This has sequential first-in/first-out accumulation and it has Siemens Simatic S7 PLC controls. Manufacturer Hartness International, USA Model Dynac 7100 Made in year 2008 Total length 64 ft / 19.5 m Table width 40 in / 101 cm Accumulation (1 mid section) 41 ft2 / 3.8 m2 Accumulation (5 mid sections) 127 ft2 /25.3 m2 Maximum speed 40 fpm / 12.2 meters/min Electric motor 2 hp, 240/480 V, 50/60 Hz

Frame presses VILMAR 580 x 350


Code: 0358 Brand: VILMAR Model: 580 x 350 Hydraulic press for mouldings / frames Worktable mm 580 x 350 N° 3 cylinders diameter mm 100 each Platens electrically heated with resistances Opening with electric platens mm 250 Opening without electric platens mm 430 Thrust 100 ton Hydraulic power Overall dimensions : mm 1200 x 1100 x 1850 h

Donut fryer Heudra HBM-25


Product number: 1257 Type: HBM-25 Belt width: 650 mm Frying length: 3500 mm Capacity: 2000/3000 pieces/hr Heating: electric Height dividers: 40 mm Oil volume: 600 liter Power: 3 x 400V, 50Hz, 56kW Dimensions: 4300 x 1100 x 1400 mm Dimensions extractor hood: 1000 x 3600 x 600 mm With tilt mechanism

Oil fryer Coat & Fry fryer


Product number: 1249 Type: Fryer Year of construction: 2014 Belt width: 400 mm Frying length: 1800 mm Heating: thermal fluid Power: 3 x 400V, 50Hz, 5.1kW Dimensions: 2500 x 1500 x 2900 mm Oil filter, circulation pump, electric hoist, touch screen ...

spindle carving machine LA SCOLPITRICE 201 16-27


16-SPINDLE CARVING MACHINE - LA SCOLPITRICE 201 16-27 No. 16 tip-tailstock devices No. 16 double-exit spindles No. 2 double speed electric converter wheelbase 270 mm working lenght: 300 mm min - 1550 mm max devices for raw pieces positioning user m ...

Wrapping machines ULMA ATLANTA


Cantilever construction that provides for easy cleaning and maintenance, with easy access to mechanical and electrical components. Left to right operating direction. Rotary cross sealing jaws with an electronic overload safety switch. Self-centring fil ...

Extraction Systems O.M.A. GF


Code: 0356 Brand: O.M.A. Model: GF Carened Dust collector - Year 2002 N° 4 collection bags N° 64 filters Galvanised sheet structure Motor Hp 15 Electric cabinet Overall dimensions : mm 5400 x 1100 x 2700 (1000) Weight kg 500
Get the latest machine offers by email: order newsletter