894 offers

New in: 1976
Price: request quote
Location: Land-il IL
Seller: Reinhold Schmitt GmbH

Material Width 1.828 mm Material Thickness 2,00 (0,50) - 6,35 mm Coil Weight 20,0 t Coil Inside – Ø – Decoiler 508 – 840 mm Coil Inside – Ø – Recoiler 610 mm Speed m/min. Working Direction left - right The Line consists of: Coil Car Decoiler Coil Opener- / Driver – Unit Cutting Shear (Crop Shear) Strip Feeding Device Shear Stand No. of Shear Stand 2 Knife Shaft – Ø app. 230 mm (9) Power 125 HP – 1.950 / 650 Rpm. Looping-Infeed Device Scrap Winder Looping Run Out Unit Conveyor Unit Recoiler Separator Arm mounted at Steel Construction Turnstile 4-Arms Electric Hydraulic more

New in: 1989
Price: request quote
Location: Land-de DE
Seller: Helmut Steinfels GmbH & Co. KG

very good condition max. coil diameter 1000mm capacity 1000kg coil inner diameter adjust 50 mm dimensions 110x220x40cm output 30 UPM more

New in: used
Price: request quote
Location: Land-de DE Essen
Seller: Ralf Teichmann GmbH

1 high quality, factory-tested, well preserved double girder crane especially suitable for the Coilumschlag Load approx. 80,000/32,000 kg Wingspan approx. 25,600 mm Hook way approx. 8,500/13,500 mm Make SIEMAG/SIEMENS Overhaul and rebuild/workshop test 2009/2016 Trolley in robust wind plant design, between the crane bridge catwalk one-sided lowered to optimize the installation height, cabin control (expandable easily on radio), operating speeds: Main hoist 80 t to approx. 4.25 m / min auxiliary hoist 32 t up to approx. 10.8 m / min Katz LG 32/80 t Max approx. 40.0/20,0 m / min Crane chassis 32/80 t Max 80.0/40.0 m / min more

New in: 1989
Price: request quote
Location: Land-de DE
Seller: Helmut Steinfels GmbH & Co. KG

very good condition max. coil diameter 1000mm capacity 1000kg coil inner diameter adjust 50 mm dimensions 110x200x40cm output 60 UPM more

New in: 1990
Price: request quote
Location: Land-de DE
Seller: Reinhold Schmitt GmbH

SPECTROMETER with 9 Ports for Analysis Analysis individual Values Matrix/Prog: FE / FE 1 Concentration in Weight Percent Coil-No.: Example 8888 Elements: I-FE / C / SI / MN / P / S / AL / TI / NB Required Space app. 1,35 x 0,90 x 1,15 m Machine Weight app. 0,5 t more

New in: 1991
Price: request quote
Location: Land-de Germany, 72501 Gammertingen
Seller: Pressen HAAS GmbH

Decoiler Coil weight: 30 ton Material width: 530 - 1.830 mm Leveller / Straightener Material width : 530 - 1.830 mm Material thickness: 0,6 - 3 mm more

New in: 1998
Price: request quote
Location: Land-sk SK Trnava
Seller: FORMEX SK s.r.o.

Capacity 20 kN, band width 500 mm, coil inner diameter 445-530 mm Coil outer diameter 1300-1400 mm Drive power 1.1 kW Rolling speed 16 U/min Manual spreading of the reel Crown with hydraulic unit complete documentation, operating instructions and manual more

New in: 1980
Price: request quote
Location: Land-de Germany, 72501 Gammertingen
Seller: Pressen HAAS GmbH

Decoiler Double mandrela coil weight each side: 1 ton Material width: 180 mm Coil exterior diameter: 1.300 mm Coil interior diameter: 360 - 530 mm Speed: 0 - 20 m / min Leveller / Straightener Material width : 200 mm Number of levelling rolls: 21 pcs. Diameter of the levelling rolls: 30 mm Material thickness: 0,5 - 8 mm Cross section: 1.200 mm Feeding speed: 40 m / min Required power: 16 kW more

New in: used
Price: request quote
Location: Land-de DE
Seller: HEGO Blechverarbeitungsmaschinen GmbH

Maximum strip width: 1550 mm Strip thickness: 0.5-4.0 mm Speed: 100 m / min. Coiler capacity: 15 to. Slitter shaft diameter.: 180 mm The line is complete, but, now is dismantled more

New in: 1980
Price: request quote
Location: Land-de Germany, 72501 Gammertingen
Seller: Pressen HAAS GmbH

Decoiler Double mandrela coil weight each side: 1 ton Material width: 180 mm Coil exterior diameter: 1.300 mm Coil interior diameter: 360 - 530 mm Speed: 0 - 20 m / min Leveller / Straightener Material width : 200 mm Number of levelling rolls: 21 pcs. Diameter of the levelling rolls: 30 mm Material thickness: 0,5 - 8 mm Cross section: 1.200 mm Feeding speed: 40 m / min Required power: 16 kW more

New in: used
Price: request quote
Location: Land-de DE
Seller: HEGO Blechverarbeitungsmaschinen GmbH

Strip width: 1,540 mm Strip thickness: 0.5-4.0 mm with: Coil car Hydr. Spreading Double decoiler 20 to. System completely and under power, but new paint job needed more

New in: 1980
Price: request quote
Location: Land-de Germany, 72501 Gammertingen
Seller: Pressen HAAS GmbH

Decoiler Double mandrela coil weight each side: 1 ton Material width: 180 mm Coil exterior diameter: 1.300 mm Coil interior diameter: 360 - 530 mm Speed: 0 - 20 m / min Leveller / Straightener Material width : 200 mm Number of levelling rolls: 21 pcs. Diameter of the levelling rolls: 30 mm Material thickness: 0,5 - 8 mm Cross section: 1.200 mm Feeding speed: 40 m / min Required power: 16 kW more

New in: 2005
Price: request quote
Location: Land-de DE Mellrichstadt
Seller: Retrofit Plastics GmbH

Fully automatic coiler for pipes from 10 – 50 mm Manufacturer: Kabelmat Type: Ringrol 800 B horizontal coiling Outer diameter: max. 800 mm Coil core: 450 / 500 Coil high: 50 – 200 mm Binding system: PP-Band Machine dimensions: approx. 420 x 1500 x 2500 mm Weight: approx.. 1800 kg Year: 2005 Condition: function tested more

New in: 2004
Price: request quote
Location: Land-de Germany, 72501 Gammertingen
Seller: Pressen HAAS GmbH

Double mandrela coil weight each side: 1 ton Material width: 135 mm Coil exterior diameter: 1.400 mm Coil interior diameter: 400 - 500 mm Speed: 5 - 50 m / min Working direction: from left to right Required power: 3 kW Weight of machine approx.: 2 ton more

New in: 2008
Price: request quote
Location: Land-de DE Flensburg
Seller: JODAU - Kommunaltechnik

Front with power steering ( incl . steering orbitrol ) , disc brakes , adjustable coil springs and dampers . Rear axle with Quaife differential gear , adjustable coil springs and dampers . Welded construction , exterior width total about 2200 mm , tires MultiTrac less used , good state . Bids required more

New in: used
Price: request quote
Location: 04626 Schmölln
Seller: Ambold Pressen GmbH

sheet width:250 mm coil outside dia.:1400 mm weight max. in kg:1600 kg plate thickness:0,5 - 2 mm straightening feed:5 - 30 m/min coiler: expanding range:450 - 550 mm total power requirement:4,5 kW weight of the machine ca.:1,6 t dimensions of the machine ca.: m more

New in: 1987
Price: request quote
Location: Land-pt PT
Seller: LUSAMATEX - Máquinas Têxteis, Lda.

1 SUPERBA thermosetting line year 1987 consisting of: - creel 12 yarns + 12 reserve yarns with yarn break detector - prefeeder - coiling head DAV - 1 pre-steamer HEP (3 + 3 m) - 1 cooling unit - 1 heat setting tunnel 12 m - 1 cooling unit - 1 accumulator MAT-2S year 1998 - 1 winder B3, take-up 10" more

New in: 2002
Price: request quote
Location: Butzbach
Seller: HD Werkzeugmaschinenhandel GmbH

band width:490 mm plate thickness:3 mm number of rolls: band coil:______________ coiler: load capacity:5 t coiler: max. width of material:490 mm more

New in: used
Price: 3.200 €
Location: Land-at AT Oberösterreich
Seller: Wilhelm Freudlinger Werkzeuge und Maschinen

Edgebander of HolzHer 1421 Built in 1994 To glue er thickness: 0.3-20 mm To glue height Max: 51 mm Min. width: 60 mm Workpiece length min: 140 mm Workpiece height of min. 6 mm / max 45 mm End trimming unit up to 3 mm Milling unit Bündig-/ milling machine 15° Feed speed 11 m / min Strip magazine and coil magazine Soundproofing hood more

New in: 1998
Price: request quote
Location: Lager Eislingen, Baden-Württemberg
Seller: Vögtle Service GmbH

material width:0500 mm coil weight:4,0 t material thickness:0,8 - 5,0 mm material thickness at 180 mm material width:5,0 mm material thickness at 400 mm material width:4,2 mm coil internal diameter:460 - 530 mm coil external diameter:1300 - 1400 mm no. of straightening rolls:7 straightening roll diameter:80 mm no. of pulling rolls:2 + 2 roll diameter:80 mm speed of decoiler:5 - 20 m/min speed feeder:57 m/min power requirement:11,0 + 3,0 kW weight of decoiler:4,2 t dimensions of the decoiler (W x D x H):2,2 x 3,5 x 2,0 m weight of feeeder-straightener:3,7 t dimensions of the feeder-straightener (W x D x H):3,0 x 2,1 x 2,2 m feeder straightening machine:1676 D/RDS-ZWL AC servo drive: intermitt ... more

New in: 1989
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

The offer includes the following machines: (1) Uncoiler Kemmerich V1000AE, belt width: 300mm max, round blank diameter: 1200mm max, expansion range: 420-520mm, load: 1000kg max., built 1997. (2) Strip leveling machine GSW RMZ 32/74, sheet width: 320mm max, sheet thickness: 0.3-2.8mm, 7 straightening rolls, built 1989. more

New in: 1989
Price: request quote
Location: Lager Eislingen, Baden-Württemberg
Seller: Vögtle Service GmbH

material width:0400 mm coil weight:4,0 t coil internal diameter:370 - 430 (530) mm coil external diameter:1500 mm material thickness:1,5 - 8,0 mm no. of straightening rolls:9 straightening roll diameter:80 mm number of draw-in rolls:2 roll diameter:160 mm straightening speed:0,3 - 30 m/min power capacity:5,5 kW dimensions decoiler (WxDxH):3,0 x 2,4 x 2,5 m weight decoiler:5,0 t dimensions straightener (WxDxH):2,3 x 2,4 x 3,2 m weight straightener:2,5 t straightening machine:RMZ 40/98 infinitely variable drive: threading device:hydraulic decoiler:SHH 4/1500 auxiliary drive: lag brake:pneumatic expansion:hydraulic snubber roll:hydraulic coil loof control:light guard coil lifting device:hydraul ... more

New in: 2012
Price: request quote
Location: Land-de DE
Seller: MET-TECH GMBH

No. Item Make Qty. 1 Second-hand LPG / Furnace oil fired top charging 25 ton Melting furnace Built: 2012 Zhuoshen 4 Nos. 2 Second-hand LPG / Furnace oil fired 16 ton Holding furnace Built: 2012 Zhuoshen 4 Nos. 3 Second-hand Tilting twin rolled continuous strip casting machines Built: 2012 Zhuoshen 4 sets 4 Second-hand 4 â Hi non reversing cold rolling mill with Achenbach Optiroll i2 system (AGC / AFC) Built: 2012 Zhuoshen 1 No. 5 Second-hand Inert Gas radiant tube Annealing furnaces for coils with common charging car. Built: 2012 Shengmao 4 Nos. 6 Second-hand slitter Strip width: 1750 mm Thickness: 0.2 â 2.0 mm Speed: ... more

New in: 1998
Price: request quote
Location: Lager Eislingen, Baden-Württemberg
Seller: Vögtle Service GmbH

Pressure:200 t stroke:10 - 50 mm no. of strokes:50 - 250 /min distance between columns:820 mm distance table/ram, max. stroke up, adjustment up:425 mm table surface area:800 x 1000 mm hole in the table:300 x 200 mm table height over floor:925 mm side window:550 mm ram surface:600 x 800 mm ram adjustment:50 mm power requirement:37,0 kW weight:18,0 t dimensions (WxDxH):2,4 x 2,55 x 3,6 m list price: in running function in our warehouse: German Safety: permitted for atomatic mode:CE-sign infinitely variable drive: clutch:pneumatic overload protection in ram:hydraulic ram counterbalance:pneumatic ram adjustment:motoric WITHOUT coil line:can be offered separately more

New in: 2014
Price: request quote
Location: Land-de DE Eystrup
Seller: Kötje Engineering GmbH

Winding off-set combination: Coilgewicht max. 1000 kg Bandwidth max. 300 mm Coilinnendurchmesser 300-600 mm Coilaussendurchmesser 1200 mm max Leveler: -9 setting rollers 32 mm diameter -2 feed rollers diameter 50 mm -Band width of 100 mm -Thickness of 3 mm -Drive 2,2 KW -with a loop control variable via laser sensor more

New in: 1973
Price: request quote
Location: Lager Eislingen, Baden-Württemberg
Seller: Vögtle Service GmbH

material width:0300 mm coil weight:0,5 t coil internal diameter:270 - 360 mm coil external diameter:1000 mm speed: m/min Power capacity: kW Weight: t Dimensions (WxDxH): m interchangeable jaws:200 mm expansion of the diameter more

New in: 1998
Price: 1.800 €
Location: Land-de DE Eystrup
Seller: Kötje Engineering GmbH

Decoiler type E 1000 -Coil weight of up to 1000 kg -Bandwidth max. 350 mm -Coilinnendurchmesser 300-600 mm -Coilaussendurchmesser 1200 mm max -with disc brake (on request with motor) more

New in: 1975
Price: request quote
Location: Lager Eislingen, Baden-Württemberg
Seller: Vögtle Service GmbH

material width:0300 mm coil weight:0,5 t coil internal diameter:270 - 360 mm coil external diameter:1000 mm speed: m/min Power capacity: kW Weight: t Dimensions (WxDxH): m interchangeable jaws:200 mm expansion of the diameter more

New in: used
Price: request quote
Location: Land-de DE
Seller: Reinhold Schmitt GmbH

COIL OPENER- / DRIVER - UNIT Band Width max. 1.600 mm Band Thickness max. 5,00 mm Power 17,3 kW Required Space app. 2,57 x 1,92 x 2,45 m Machine Weight app. 6,75 t The Line consisting of: Telescopic Table - Lifting/Lowering + Forward/Back - hydraulically No. â Driver Rolls 2 (1 x above / 1 x below) Roll Length 1.580 mm / Roll â á 300 mm / Coating rubberized Upper Roll motor driven by toothed Belt, Driver Unit Gear Motor, Motor Manufacturer Getriebebau Nord, Type SK 160-11-4, Power 17,3 kW/1.460 min-1 Gear Box Manufacturer Getriebebau Nord, Type SK 73-160-11-4, i = 52-24 Adjustment Upper Block complete - Lifting/Lowering - hydraulically No. â Conveyor Roll (Pulley) ... more

New in: 1975
Price: request quote
Location: Lager Eislingen, Baden-Württemberg
Seller: Vögtle Service GmbH

material width:0300 mm coil weight:0,5 t coil internal diameter:270 - 360 mm coil external diameter:1000 mm speed: m/min Power capacity: kW Weight: t Dimensions (WxDxH): m interchangeable jaws:200 mm expansion of the diameter more

New in: new
Price: 8.980 €
Location: Land-de DE Sprockhövel
Seller: ABS Schwabe Germany

New decoiler with hydraulic spread: Capacity 3.0 Tons at 400 mm bandwidth Capacity 2.75 Tons at 650 mm bandwidth Capacity 2.75 Tons at 750 mm bandwidth Mandrel shaft height 1200 mm Coil-Outside Diamter 1500 mm Spreader range 450-600 mm Hydraulic spread with hand pump, optional electric pump. ABS patent spread over 3 hydraulic cylinders Options : pneumatic pressure arm, mouvable basement, brackets for round coil clamping The here given price is for standard version with electronic variable speed control, Ultrasonic-loop-control with selve-learning reel-calculater, Siemens SPS, drive Lenze or Siemens. The decoiler is on stock, the brackets will be produced belong to the needed b ... more

New in: used
Price: request quote
Location: Lager Eislingen, Baden-Württemberg
Seller: Vögtle Service GmbH

material width:0200 mm coil weight:1,0 t coil internal diameter:300 - 800 mm coil external diameter:1200 mm Weight:1,0 t Dimensions (WxDxH):1,5 x 1,3 x 1,6 m manual expansion: lag brake: more

New in: used
Price: request quote
Location: Land-de DE
Seller: Rau GmbH

Bogie hearth kiln with 7.500 l. net capacity and maximum burning temperature of 1.280°C; incl. 2 kiln carts, switchgear cabinet and partly new heating coils. Chamber dimensions: 5,4 m x 1,0 m x 1,4 m high; Maximum load weight: 2.500 kg. Very good condition. more

New in: 1975
Price: request quote
Location: Lager Eislingen, Baden-Württemberg
Seller: Vögtle Service GmbH

material width:0300 mm coil weight:0,5 t coil internal diameter:270 - 360 mm coil external diameter:1000 mm speed: m/min Power capacity: kW Weight: t Dimensions (WxDxH): m interchangeable jaws:200 mm expansion of the diameter more

New in: 2004
Price: request quote
Location: Land-de DE 01587-Riesa
Seller: Brand GmbH

Used heated cooled tube worm Heating screw cooling spiral Manufacturer: NEMA Type: KRS 0500 x 6800 KELSAE - 220 K No.: K62. 281-012 BJ.: 09/2004 II2D ex -Cloak room Max. Operating pressure 6 bar Max. Operating temperature 10/80 ° C Volume 145 ltr Medium water -Wave room Max. Operating pressure 6 bar Max. Operating temperature 10/80 ° C Capacity 110 ltr Medium water -Product space Max. Operating temperature 10/150 ° C Capacity 835 ltr Intake opening approx. 600 x 300 mm Filament thickness 10 mm Coil height approx. 70 mm Incline approx. 170 mm Thickness of the pipe screw approx. 13-15 mm Drive motor with chain and chain case SEW-eurodrive 230/400 ... more

New in: 1993
Price: request quote
Location: Standort
Seller: Vögtle Service GmbH

pressure:0600 t distance between columns: mm stroke:350 mm no. of strokes:11 - 44 /min Distance table/ram, max. stroke up, adjustment up:1550 mm table surface area:3600 x 2500 mm sliding table:3600 x 2500 mm ram surface:3600 x 2500 mm Side window: mm ram adjustment:400 mm material width coil line:500 - 1950 mm Material thickness at 1200 mm material width:0,6 - 2,5 mm Material thickness at 1850 mm material width:0,6 - 2,0 mm Material thickness at 1950 mm material width:0,6 - 1,75 mm Coil weight:35,0 t coil internal diameter:610 mm coil external diameter:900 - 1900 mm no. of straightening rolls:13 straightening roll diameter:50 mm Stack height:400 mm stacking dimensions - station 1+2 (L x W):1 ... more

New in: used
Price: request quote
Location: Land-de DE
Seller: HEGO Blechverarbeitungsmaschinen GmbH

Recoiler 850 x 6/8 mm x 10. Mech. overhauled Coil weight Max: 10 to. Band thickness: 0.8 - 6/8 mm (RM = 500 N/mm2) Band width: 850 mm Coil I diameter.: 508 mm hydraulic expansion Basement with pusher, hydraulic 2-speed gear box 1/20-1/40 Original motor (not available) DC 75 kW, 540-1800 rpm not included: Oil station, valves and piping Electric motor, clutch, brake, control cabinet, etc. more

New in: used
Price: request quote
Location: Schmölln
Seller: Ambold Pressen GmbH

sheet width:310 mm coil weight:2500 t coil internal dia.:380 mm coil outside dia.:1400 mm coil width:350/500 mm coiler: expanding range:380 - 530 mm no. of rolls:2 + 7 thickness of material:3 mm total power requirement:1,5 kW weight of the machine ca.: t machine dimensions LxWxH:Haspel 1,4 x 1,72 x 1,61 m machine dimensions LxWxH:Richtmaschine 1,28 x 0,9 x 1,3 m more

New in: used
Price: request quote
Location: Land-de DE Rottenberg
Seller: WEIBERT maschinen

Perske 10DW 12/10 DA 12/2 Frequency converter Drive motor: Type: DA 12/2 8KW 400V 50 HZ S1 IP 54 Circuit: Triangle 2910 RPM Coil: 7.5 A 380 V excitation voltage excitation 50 HZ excitation frequency donation page: Type: 10DW 12/10 10 kVA power 35 A of output current 300 Hz output frequency output voltage of 165 V speed: 12000 U/1 18,000 U/1 G & 2768-M3520 more

New in: 1959
Price: request quote
Location: Land-de DE
Seller: Helmut Steinfels GmbH & Co. KG

wire diameter 0,2-0,8 mm spring diameter 20 mm feeding length 3910 mm output pieces/min 220 more

New in: 1968
Price: request quote
Location: Land-de DE
Seller: MET-TECH GMBH

Qty. 1 Second-hand 3 stands 4-Hi Tandem cold rolling mill line Mfc.: Demag Type: 4-Hi Built: 1968 Material to be rolled: low carbon steel Strip width: 600 †1500 mm Thickness Entry: 2.5 mm Exit: 0.2 mm Entry: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Exit: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Work roll: dia. 380 mm x 1650 mm Roller bearings Back-up rolls: dia. 1150 mm x 1650 mm Oil film bearings Housing: Closed top, cast steel construction Housing post: 762 x 552 mm Rolling speed: 240 m/min. more

New in: 2007
Price: request quote
Location: Land-it IT
Seller: Mercator S.R.L.

Technical specifications:Edgeband thickness max mm: 10Thickness of coiled edgeband max mm: 3Feedrate max m/min: 20Suitable for PUR glue: YesPremilling unit: YesCorner rounding unit: 2 motorsScraper unit: profile and flatAggregates actuated by control: pneumaticMachine length mm: 6000Edgeband height max mm: 60Workpiece length min mm: 140Workpiece width min mm: 85Total connection kW: 22Weight kg: 2900 more

New in: 1968
Price: request quote
Location: Land-de DE
Seller: MET-TECH GMBH

Qty. 2 Second-hand pickling lines Mfc.: Sundwig Built: 1968 Tank of clean HCl: 50 m³ Tank for dirty HCl: 50 m³ Strip width: 1525 mm Qty. 3 Tanks interconnected one for each bath 310 m³ Qty. 3 Baths HCl 152.5 m Double bath pre-washing water Bath for final water washing Heater Chimney for taking out the acid vapors Acid pumps Auxiliary pumps Leveling machine Mfc.: AEG-EMG Built: Oiling machine Mfc.: Sundwig Built: Coiler Mfc.: Sundwig Built: more

New in: 2006
Price: request quote
Location: Land-it IT
Seller: Mercator S.R.L.

Technical specifications:Edgeband thickness max mm: 3Thickness of coiled edgeband max mm: 3Feedrate max m/min: 12Premilling unit: YesCorner rounding unit 2 motorsScraper unit: profile and flatMachine length mm: 5213Edgeband height max mm: 60Glue system granulate: glue pot below feeding chainChangeable glue tank: YesSpraying device: YesTrimming saw: 1 motorFlush/radius/chamfer milling units: 1Buffing unit: YesRapid-change aggregate(s): YesTotal connection kW: 18Required space lxwxh: 5213x1261x1960Weight kg: 2100 more

New in: used
Price: request quote
Location: Land-bg BG
Seller: MachTechnica Ltd.

Stamping press, KYODO, YODOGAWA YOM ~ 1973 -Capacity (2 mm above BDC)- 150 ton - 120- 200 s.p.m. - stroke 25 mm - stroke down adjust up 340 mm - slide adjustment 50 mm -bolster area 1100x850 mm - bolster thickness 140 mm - slide area 1000x650 mm - bed hole area 900x280 -22 kW For production of Stator and Rotor lamellas, etc. Very good condition Including de-coiling system more

New in: 2005
Price: request quote
Location: Land-it IT
Seller: Mercator S.R.L.

Technical specifications:Edgeband thickness max mm: 10Thickness of coiled edgeband max mm: 3Feedrate max m/min: 20Suitable for PUR glue: YesCorner rounding unit: 2 motorsScraper unit: profile and flatAggregates actuated by control: pneumaticMachine length mm: 6000Edgeband height max mm: 60Workpiece length min mm: 140Workpiece width min mm: 85Total connection kW: 22Weight kg: 2900 more

New in: 2004
Price: request quote
Location: Land-nl NL Mijdrecht, The Netherlands
Seller: VRT International B.V.

FRIGOSCANDIA GCM 9/3-10-35-32-NN-CR Product number:M15-5006 Cooling capacity:400 kW Number of fans:3 Refrigerant:NH3/CO2/Freon Voltage:400 Volt Motor power:75 kW Year:2004 Number in stock:1 piece(s) A very nice Frigoscandia spiral freezer. Model GCM 93-10-35-32-NN-CR with a product capacity of +/- 4.000 kg/h (depending on type of product and inlet temperature). In/outfeed configuration is North/North. Infeed height= 980 mm, outfeed height= 4756 mm. Belt rotation is clock wise, belt width gross = 920 mm, belt width net = 875 mm, max product height = 80 mm, numbers of tiers = 35 tiers. This Frigoscandia spiral freezer from 2004 has only been used for 4 years and during this 4 year ... more

New in: 2006
Price: request quote
Location: Land-it IT
Seller: Mercator S.R.L.

Technical specifications:Edgeband thickness max mm: 12Thickness of coiled edgeband (PVC/ABS) max mm: 3Feedrate max m/min: 18Premilling unit: YesCorner rounding unit: 2 motors (Round)Universal milling aggregateScraper unit: profile and flatGlue system granulate: Granulate tank for premeltingBuffing unit: YesMachine length mm: 7800Edgeband height max mm: 60Weight Kg: 3500 more

New in: 2001
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Pipe diameter: 20-75mm, coiled bundle outer diameter: 2700mm, coiled bundle width: 163-480mm, flap height: 440mm, coiled bundle inner diameter: 600-1600mm, automatic strapper Cyklop, pipe cutt-off device, coiled bundle pushing unit, coiled bundle picker. more

New in: 1989
Price: request quote
Location: Land-it IT
Seller: Mercator S.R.L.

TECHNICAL DATA4 head gilding machine with feed systemCoil cutterWorkpiece loaderMax. working width: 110 mm more

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more types: