DR. BOY boy used machines

Key data: 900 kN, 42 mm

BOY 90 E Stock No.: 503452 Manufacturer: BOY Type: Boy 90 E Control: Procan ALPHA Year of Make: 2012 Hours: 49130 h Technical data closing page Clamping force: 900 kN Wooden dimensions h x v: 430 x 360 mm Panel size h x v: 635 x 610 mm Min. installation height: 250 mm Plate spacing max.: 725 mm Opening travel: 475 mm Ejector stroke: 130 mm Ejector force: 20 kN Centering of movable plate D: 110 mm Centering fixed plate D: 110 mm Tool weight: 800 kg Technical Data Spray Side Screw diameter: 42 mm Capacity: 157.8 cc Spray pressure: 2347 bar Screw length: 20 l/d Screw stroke: 155 mm Screw speed: 280 min Worm torque: 735 N Plasticizing current: 136 g/s PS Number of heating zones: 4 Nozzle travel: 250 mm Dimensions & Weight Machine dimensions LxWxH: 4.37m x 1.21m x 2.2m Total Weight: 3730KG Equipment Screen text German Core pull hydraulic 1x Machi ...

Offered is a Boy 100E 2K injection molding machine (year 2020, approx. 15160h) including Boy 2C XS unit, Boy LR5 handling (year 2020) as well as Dorner GAL-60 conveyor. 1000kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw (main unit) + 22mm screw (2K), fully enclosed, hydraulic ejector 42.7kN, OPC-UA & network interfaces, EUROMAP-67 robot interface, robot stroke X/Y/Z: 300mm/800mm/1500mm, conveyor 400mm width, 2m length. Viewing is possible upon arrangement.

Key data: 900 kN, 42 mm

Dr. BOY 90 E Stock No.: 503581 Manufacturer: BOY Type: 90 E Control: Procan ALPHA Year of Make: 2013 Hours: 32768 h Technical data closing page Clamping force: 900 kN Wooden dimensions h x v: 430 x 360 mm Panel size h x v: 635 x 610 mm Min. installation height: 250 mm Plate spacing max.: 725 mm Opening travel: 475 mm Ejector stroke: 130 mm Ejector force: 20 kN Centering of movable plate D: 110 mm Centering fixed plate D: 110 mm Tool weight: 800 kg Technical Data Spray Side Screw diameter: 42 mm Capacity: 157.8 cc Spray pressure: 2347 bar Screw length: 20 l/d Screw stroke: 155 mm Screw speed: 280 min Worm torque: 735 N Plasticizing current: 136 g/s PS Number of heating zones: 4 Nozzle travel: 250 mm Dimensions & Weight Machine dimensions LxWxH: 4.37m x 1.21m x 2.2m Total Weight: 3730KG Equipment Screen text German Levelling elements EUROMAP 67  ...

Offered is a Boy 80E 2K injection molding machine (year 2016, approx. 29398 operating hours) including 2C XS aggregate, Wittmann Primus 16 handling (year 2022), Dorner GAL-60 conveyor. 800kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw, completely enclosed, hydraulic ejector 42.7kN, EUROMAP 67 interface, robot stroke X/Y/Z: 2000mm/1200mm/620mm, conveyor 400mm width, 2m length. Viewing is possible by arrangement.

Key data: 50 kN, 38 mm

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 50M injection moulding machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing mac ...

Key data: 220 kN

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 22M injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and addi ...

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 55A injection moulding machine, fitted with the Procan CT Controller. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on reques ...

BOY 90A (102) Description Without funnel General information Item number: 102 Availability: In stock Year of construction: 2006 Brand: Boy Specifications Injection weight: 193 g Clamping force: 900 kN Screw diameter: 42 mm Spray pressure: 1724 bar Tie bar distance: 430x360 mm Clamping plate size: 635x610 mm Tool installationheight min.: 250 mm Control: Procan CT Language: German Power: 26.3 kW Operating hours: 15070 h Weight: 3100 kg Dimensions: 4.9x1.2x2.1 m Funnel: No

This Dr. Boy injection molding machine is in machine storage at Plastima Used Machinery. The machine is from 1996 and has relatively few working hours for its age. – Brand: Dr. Boy – Model: 80M – Year built: 1996 – Screw diameter: 42mm – Shot volume: 200 cm³ – Closing force: 80T – Working hours: 24,222

BRAND: BOY YEAR: 2010 MODEL: 55 M PRODUCTION HOURS: 5532 APPLICATION TYPE: INJECTION MOULDING LOCATION: GERMANY MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: PROCAN MODEL: MD MAIN DRIVE STROKE: 80 MM MEDIA MAIN ELECTRONIC CONNECTION: 400 V Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - 2020/2021 MAINTAINED BY BOY / UPDATED TO CURRENT STATUS

Key data: 12 , 10 , 18

Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire is this high precision BOY 12A injection moulding machine. Fitted with the Procan controller and 18mm diameter screw, which gives a shot weight of 9.64 (PS)g. The 12A from BOY is one of the most common small moulding machines we see, it is extremely accurate while still maintaining versatility with tooling and familiar control setup. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP ...

This injection moulding machine from Dr. Boy is in good condition. The machine is from 2007 and has few working hours. Brand: Dr.Boy GmbH & Co.KG Model: 55M Year of construction: 2007 Clamping force: 55 T Screw diameter: 32mm Shot volume: 96.5 cm³ Working hours: 24,210

Key data: 550 kN

Boy 55A Pro / Operating hours: 18,153 in automatic mode / Machine in very good technical condition Year of Make: 2016 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit: Clamping force: 55 t Spar spacing: 360x335 mm Size of the clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: 18,153 in automatic mode Pneumatic core x 2 Hardened injection unit - Bimetal The machine has been regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW Al ...

Key data: 550 kN

Boy 55A Pro / Operating hours: 16,624 in automatic mode / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit : Clamping force: 55 t Spar spacing: 360x335 mm Size of the clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: 16,624 in automatic mode Pneumatic core x 2 Hardened injection unit - Bimetal The machine has been regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW A ...

Key data: 550 kN

Boy 55A Pro / Operating hours: 17,083 in automatic mode / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit: Clamping force: 55 t Spar spacing: 360x335 mm Size of the clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: 17,083 in automatic mode Pneumatic core x 2 Hardened injection unit - Bimetal The machine has been regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW Al ...

Hydraulic injection moulding machine manufactured in 2024. This BOY XS 161 features a clamping force of 100 kN and a maximum injection pressure of 2298 bar. It includes a 14 mm screw diameter and a theoretical shot volume of 6.1 cm³. If you are looking to get high-quality injection moulding capabilities, consider the BOY XS 161 machine we have for sale. Contact us for further details.

Butcher Boy BM1000 Ribbon blender Stainless, 1000l ribbon blender, forward / reverse, twin discharge doors, safety guarded top, on mobile frame, 3Ph

Key data: 550 , 92 , 32

Manufacturer: Boy Type: 55 MVV Year of construction: 2008 Control: Procan MD Clamping force: 550 kN Type of lock: Hydraulish Spar spacing: 360 mm x 335 mm Plate size: 565 mm x 540 mm Tool installation height: min 250 mm Opening distance: 300 mm Plate spacing max.: 550 mm Screw: 32 mm Displacement: 96.5 cc Spray weight PS: 92.3 gram HP Spray pressure: 2127 bar General Motor: 11 kW Heating: 7,7 kW Dimensions: 3 m x 1.2 m x 3.7 m Weight: 2700 kg Screen text: German / English / French Additional equipment Robot interface

Key data: 550 , 92 , 32

Manufacturer: Boy Type: 55 AVV Year of construction: 2012 Control: Procan ALPHA Clamping force: 550 kN Type of lock: Hydraulish Spar spacing: 360 mm x 335 mm Plate size: 565 mm x 540 mm Tool installation height: min 250 mm Opening distance: 300 mm Plate spacing max.: 550 mm Screw: 32 mm Stroke volume: 96.5 ccm / 92.3 gram HP Injection pressure: 2127 bar General Motor: 11 kW Heating: 7,7 kW Dimensions: 3 m x 1.2 m x 3.7 m Weight: 2700 kg Screen text: German / English / French Additional equipment Robot interface

BRAND: BOY YEAR: 2002 MODEL: 55A APPLICATION TYPE: INJECTION MOULDING LOCATION: GERMANY MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATEYL Technical Information GENERAL DATA MEASUREMENTS WIDTH: 1101 MM MEASUREMENTS DEPTH: 4220 MM MEASUREMENTS HEIGHT: 2040 MM MACHINE WEIGHT: 2490 KG CONTROL UNIT BRAND: PROCAN MODEL: CT CLAMPING UNIT CLAMPING FORCE: 550 KN Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - FORMATION PATH MAX: 400 MM - PLATE SPACING MIN-MAX: 250-650 MM - BAR DIAMETER: 45 MM - SIZE OF THE CLAMPING PLATES: 565X540 MM

Butcher Boy TCA32 Mincer Stainless mincer, on stand, 100mm diameter throat, with mincing plate, 3Ph

2000 BOY 22 M Injection Molding Machine vertical Clamping unit 22 ton Max / Min Plate space 400 / 200 mm Screw: 22 mm Injection pressure 1732 bar Injection volume 30 ccm Shot weight: 27 g/PS Weight: 950 kg Funtional We can sell 2 pieces of this type, one is year 2000 and one is year of made 1995

Key data: 22 kN

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 22M injection moulding machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing mac ...

Key data: 220 kN, 32 g/PS, 24 mm

Now fully refurbished by the team at STV Machinery is this Boy 22M-HV machine. It has a horizontal clamp unit and a vertical injection unit which it makes it suited for split-line injection. It is fitted with a 24mm diameter screw. Manufactured in 2006 and has less than 28,000 hours. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and  ...

Key data: 805 kN

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 80M injection moulding machine, fitted with the Procan Controller. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and ...