HAEUSLER used machine for sale

Manufacturer: Haeusler Type: VRM HY 4000 x 45 Stock number: 0973 Year of construction: 2001 Bending length: 4000 mm Bending strength: 45 mm Bending (cold): 38 mm Drive power: 100 kW Number of reels: 4 Adjustable rollers: 3 Type of adjustment of the rollers: hydraulic Top roll diameter: 710 mm Underroll diameter: 640 mm Side roller diameter: 520 mm Working speed: 2+4 m/min (up to 8m/min) Machine weight (with roller): 78 t Accessories Electronic synchronization Air-cooled oil cooler Upper support device Side cylinder support device (10t) Inlet table (20t) hydr. Bubble storage Cone bending device

4-roll plate bending machine Mod. VRM NG HY 3000x40 Country of manufacture: Switzerland YOM: 1997 Brand: HAEUSLER AG Roll diameter 560/540/400 mm Roll thickness 40mm Roll length 3000mm Motor motor Power:55kW System: Hydraulic Voltage: 380V/3 phase Weight 45 000kg The quality of the machine is still very good.

Haeusler 4 Roll Double Initial Pinch Hyd Plate Roll Model: VRM-HY Number of Driven Rolls: 4 Length of Rolls: 122.04" / 3100mm Capacity Pre Bend: 3.5" / 90mm Capacity: Rolling: 3.9" / 100mm Roll Diameter (Top): 31.1" / 790mm Roll Diameter (Bottom): 31.1" / 790mm Roll Diameter (Side): 23.6" / 600mm Roll Diameter (Spare Top): 25.5" / 650mm Main Motor Drive: 215 HP / 160kW Equipped With Double Initial Pinch Hydraulic Drop End Hydraulic Tilt of Top Roll Hydraulic Positioning of Side Rolls Top/Bottom Driven Via Cardon Shaft Drives to Gear Box Spare 25" / 650mm Top Roll For Smaller Diameter Rolling Set up for Hot Rolling

specifications: Max sheet width 3,000 mm Max sheet thickness at max yield strength 240 N/mm2 when bending to max. sheet width 35 mm when rounding Bend length 2.2 x S Max passage between rollers 145 mm Roller diameter upper roller 552 mm Underroller 532.4 mm Side rollers 400 mm Number of rollers 4 Powered rollers 2 top and bottom roller Drive of the rollers hydraulically Arrangement of the rollers symmetrically Rotation speed of the rollers 2-4 m/min Adjustable rollers 3 Type of adjustment of the rollers hydraulically Adjustment speed lower roller 0-200 mm/min. Side rollers 0-700 mm/min. Brake of the rollers pneumatic Actuation of the folding bearing hydraulically Operating voltage 3 x 380 V / 50 Hz Display device of the roll positions 4 x optical/analog Weight of the machine approx. 42 to Area 2.71 x 6.4 m Height 3.12 m

Technical data: 4 bending rolls Max bending range: 3,000 mm external switching and Control Panel, as well as counter holder

Technical data: maximum sheet width: 3000 mm maximum plate thickness at maximum yield of 240 N / mm² on bending: 35 mm On bending length: 2,2 x S Diameter of roller upper roller: 552 mm Bottom roll: 532,4 mm Side rolls: 400 mm

Working diameter: 1500-6000mm, working length: 1200-3000mm, wall thickness: 20-70mm.

Working diameter: 1500-6000mm, working length: 1200-3000mm, wall thickness: 20-70mm.

Working width: 2000mm, max. sheet thickness: 13mm, can be used horizontally and vertically, with decoiler, decoiler driven and hydraulically adjustable to coil diameter.

Working width: 3000mm, max. sheet thickness: 120mm, with optical display of roller adjustment, central lubrication, cone bending device, overrun brake and exchange top roller Ø820mm and Ø740mm.

Working width: 2500mm, max. sheet thickness: 20mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine provided for exchangeable top rollers up to min. Ø 450mm, machine revision 2009, factory inspection 2012.

Working width: 3000mm, max. sheet thickness: 110mm, with CNC control, central lubrication, cone bending device, infeed carriage, one upper and two lateral cylinder support devices.

Working width: 3000mm, max. sheet thickness: 12mm, with digital display of roller adjustment, central lubrication, air cooling, cone bending device and CNC controls.

Working width: 2500mm, max. sheet thickness: 20mm, with optical display of roller adjustment, central lubrication, cone bending device and overrun brake.

Axis diameter: 95 double T-iron on the x-axis: mm U-iron on the x-axis: mm T - beam - web outwards: mm channels - flange: angle steel/side length: mm square bar steel: mm peripheral speed: m/min total power requirement: KW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 1,6 x 1,5 x ,9 m Profile bending machine with: - 3 driven axles - Box with tools - Emergency stop facility The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: SPECIFICATIONS Character: Haeusler Type: HPR 10 Coker round: 89x5 mm - diameter 600 mm Solid round: 65 mm - diameter 600 mm Solid square: 50x50 mm - diameter 500 mm Solid rectangle difficult side: 90x15x10 mm - diameter 900 mm Corner iron outside: 90x90x11 mm - diameter 900 mm Angle iron inside: 70x70x10 mm - diameter 900 mm T-profile outer edge: 100x100x11 mm - diameter 1,000 mm T-profile inside edge: 70x70x10 mm - diameter 900 mm weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 1,300 x 1,400 x 1,800 mm

Description: SPECIFICATIONS Character: Haeusler Type: RMA 2,500x30 Year of construction: 1962 Mechanical: Yes Roller length: 2,500 mm Sheet thickness: 30 mm Number of rolls: 3 Upper roller diameter: ø450 mm weight approx.: 24,000 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 7,200 x 2,750 mm

Description: SPECIFICATIONS Hydraulic 4-roll plate roller Character: Haeusler Type: VRM 3000/15 Roller length: 3,000 mm Plate thickness: 15 mm Number of rollers: 4 Upper roller diameter: ø350 mm Hydraulic folding Hydraulic lifting Conical rollers 2 Powered rollers Transport dimensions: 7,000 x 2,250 x 2,300 mm Machine weight: 21,000 kg Approx. Onsite Dimension. (l x w x h): 7,000 x 2,250 x 2,300 mm, weight approx.: 21,000 kg

Make HAEUSLER Type VRM 1500 x 5 Year of construction 1964 Control conventional Sheet width 1500 mm Sheet thickness 5 mm Prebending 4 Upper roll diameter 185 mm Lower roll diameter 185 mm Side roll diameter 145 mm Dimensions of the machine L x W x H 4.0 x 1.23 x 1.6 m - Conical bending device - pneum. Folding stock

sheet width: 4000 mm plate thickness: 40,00 mm pre-bending: total power requirement: kW weight of the machine ca.: 78 t dimensions of the machine ca.: m Adjustable rollers 3 The rollers are adjusted hydraulically Top roller diameter 710 mm Bottom roller diameter 640 mm Side roller diameter 520 mm Working speed 2+4 m/min (up to 8m/min) Additional equipment Electronic synchronization Air-cooled oil cooler Upper support device Lateral cylinder support device (10t) Infeed table (20t) hydr. Bladder storage Cone bending device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheet thickness: 70,00 mm Bending length: 3050 mm Number of rolls: 4   Rolling width:                 3050mm Rolling thickness 3x toproll Ø:60mm Rolling thickness 5x toproll Ø:70mm Rolling thickness prebending:  50mm Top Roll Ø:                    630mm Bottom Roll Ø:                 600mm Side roll Ø:                   500mm Number of rolls:               4 Rolling speed:                 0 - 5 Adjustiment lower roll:        200mm/min. Adjustment side rolls:         200mm/min. Number of driven rolls:        2 Power:    & ...

Hydraulic four-roll plate bending machine Fabr. Haeusler type VRM HY 2000-6Machine number: 1186-1968, built in 1968Max. Working width approx. 2040 mmMax. Druchgang approx: 2100 mmMax. Sheet thickness with bend: 6 mmUpper and lower roller diameter each approx: 250 mmSide roller diameter approx.: 200 mmStroke of rollers approx. Each: 220 mm2 working speedsTotal drive power approx: 18 KWWorking height approx: 1300 mmSpace required: L 5450 x D 1900 x H1930 mmWeight approx: 10500 kgWith:- Both side rollers with mot. delivery for bending + conical bending- hydr. Folding bearing for removing the sheet metal- Slip clutch- Right-left purchase- separate control panelused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are ...

Sheet thickness: 20,00 mm Bending length: 3000 mm Number of rolls: 4   incl. hydraulic top support incl. side support incl. spare roll 300 mm ( small cones) Rolling width:                 3.000mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending:  18mm Top Roll Ø:                    430 + 300 mm Bottom Roll Ø:                 430mm Side roll Ø:                   300mm Number of rolls:               4 Rolling speed:                 2 + 4 m/min Adjustiment lower roll:        200mm/min. Adjustment side rolls:    & ...

Sheet thickness: 150,00 mm Bending length: 3000 mm Number of rolls: 4   MACH-id     5563 MAKE          Haeusler TYPE           VRM-HY YOP             1990 / 2000 SPECIFICATIONS Rolling width         3000 mm Rolling thickness 3x toproll Ø     120 mm Rolling thickness 5x toproll Ø      150 mm Rolling thickness prebending       100 mm Top Roll Ø          910 + 820 + 740 mm Bottom Roll  Ø    940 mm Side roll Ø           780 mm Number of rolls    4 Rolling speed        2 + 4 m/min Adjustiment lower roll        200 mm/min. Adjustment side rolls    &nbs ...

Sheet thickness: 60,00 mm Bending length: 4000 mm Number of rolls: 4   MACH-id    1784 MAKE         Haeusler TYPE           VRM HY YOP             2000 SPECIFICATIONS Rolling width       4000 mm Rolling thickness 3  x toproll Ø      60 mm Rolling thickness 5   x toproll Ø     50 mm Rolling thickness prebending       40 mm Top Roll Ø       710 mm Bottom Roll Ø        640 mm Side roll Ø      520 mm Number of rolls          4 Rolling speed      1/4/6/8 m/min Top support         Yes Side supports       Yes Number of driven rolls  ...

Sheet thickness: 60,00 mm Bending length: 3000 mm Number of rolls: 4   SPECIFICATIONS Controll   Conventionel Hydraulic / Mechanical   Hydraulic   3 or 4 roll    4 roller Maximum sheet thickness   60 mm Bending length   3000 mm Max. Rolling capacity Ø 2.500   60 mm Max. Prebending capacity Ø 2.500   45 mm Top Roll Ø  560 mm Bottom Roll Ø  540 mm Side Rolls Ø  400 mm Power   55.5 kW Working speed M/Min. 2 + 4 M/min.  

Sheet thickness: 30,00 mm Bending length: 3000 mm Number of rolls: 4   MACH-id   4022 MAKE        Haeusler Swiss TYPE          VRM - HY YEAR          SPECIFICATIONS      Hydraulic / Mechanical    Hydraulic 3 or 4 roll   4 roll Maximum sheet thickness    30 mm Bending length     3000 mm        Max. Rolling capacity Ø 2.500      25 mm Max. Prebending capacity Ø 2.500      20 mm Top Roll   Ø    420 mm Bottom Roll Ø   400 mm Side Rolls Ø    340 mm

Sheet thickness: 25,00 mm Bending length: 3100 mm Number of rolls: 4   SPECIFICATIES Besturing  SIEMENS PANEL Werking   Hydraulisch / Mechanisch Hydraulic3 of 4 rollenwals  4 roll Plaatdikte  25 mm Wals lengte in mm  3100 mm Max. wals dikte bij product Ø 2.500  20 mm Max. aanbuiging bij product Ø 2.500  10 mm Boven rol diameter   Ø370 mm Onder rol diameter    Ø370 mm Zij rollen diameter Ø260 mm Werk snelheid in M/Min.  0 - 4 M/min. AFMETINGEN Lengte  6950 mm Breedte  2180 mm Hoogte2100 mm  

Sheet thickness: 30,00 mm Bending length: 3000 mm Number of rolls: 4   Rolling width:                 3.000mm Rolling thickness 3x toproll Ø:22mm Rolling thickness 5x toproll Ø:30mm Rolling thickness prebending:  20mm Top Roll Ø:                    420mm Bottom Roll Ø:                 400mm Side roll Ø:                   300mm Number of rolls:               4 Rolling speed:                 0 - 4 m/min Adjustiment lower roll:        200mm/min. Adjustment side rolls:         200mm/min. Number of driven rolls:        2 Power:  & ...

Sheet thickness: 12,00 mm Bending length: 1500 mm Number of rolls: 4   MACH-id    5219 MAKE         Haeusler Swiss TYPE           VRM HY 1500 x 12 / 10 YOP              2002 SPECIFICATIONS Control         Conventionel Hydraulic / Mechanical      hydraulic 3 or 4 roll       4 roll Maximum sheet thickness        12 mm Bending length          1500 mm Max. Rolling capacity Ø 2.500       12 mm Max. Prebending capacity Ø 2.500        10 mm Top Roll Ø      220 mm Bottom Roll Ø     220 mm Side Rolls Ø       200 mm Working speed M/Min.4  M/min. DIMENSIONS Lengt ...