REHEAT FURNACE Type: Walking Beam Incoming Billet: 160 x 160 mm x 8.300 – 12.000 mm Charge: Hot and Cold Discharging Temperature: 1150 Degr. Nominal Production 90 Ton/Hr Fuel: Natural Gas (LNG) Furnace inside dimensions: L x W 12.500 x 12.800 mm REBAR ROLLING MILL: Type: Housingless Stands Roughing Mill: 6 Stands Intermediate Mill: 6 Stands Finishing Mill: 6 Stands Horiz. Stands # 1,3,5,7,9,11,13,15,17 Vert. Stands # 2,4,6,8,10,12,14 Horiz./Vert Stands #16 and 18 CROP SHEAR No. 1 Head & Tail Cropping, Emergency Chopping Type: Crank Shear- Blade width 200 mm CROP SHEAR No. 2 Head & Tail Cropping, Emergency Chopping No. of Blades: 4- Blade width 180 mm  ...

Qty. 1 Second-hand bar and wire rod production plant Mfc.: Sarralle, Danieli, ABB, Indar Built: 1990’s, 2000, 2005, 2007, 2010 Revamped: 2008 Capacity: 1,100,000 T/annum Entry material: Scrape Semi product: Billets Size: 130x130 mm or 140x140 mm Length: 8 – 13 m Reinforced Bars: Dia.: 8 - 40 mm Length: 6 – 12 m Rebars: Dia.: 8 - 16 mm ID: 850 mm OD: 1100 – 1250 mm Height: 800 mm Wire Rod: Dia.: 5.5 – 14 mm Scope of supply: Scrap Transportation Machines EAF Ladles Furnace Continuous Caster Billet Reheating Furnace 23 Rolling Mills (Dia. 8-10 mm) 21 Rolling Mills (Dia. 12-32 mm) Wire Rod Mill Flying Shears (2) Spooler Line Cooling beds (2) Cranes Tr ...

The Section Mill was commissioned in 2011 including advanced rolling mill mechanical equipment alongside electrics and automation systems utilizing Siemens-brand technology. The rolling reutilized a minor portion of the equipment of the previous rolling mill standing there. Those are the finishing mill stands, the high-speed shear before cooling bed and finishing cold shear. Designed for a production capacity of 600,000 tons per year, the rolling mill can process either billets, blooms, or beam blanks into a wide mix of beams, sections, and flat bars. It features a 120 tph walking beam reheating furnace, a breakdown reversible mill (BDM), a three stands ultra-flexible reversing mill (UF ...

Qty. 1 Second-hand extrusion press – 2200 MT Mfc.: Breda Danieli Built: 2016 Status: still in production Max. Extrusion Force: 21,9 MN at 300 bar Max. working pressure: 310 bar Type of press: back loading with 2 containers Billet size 8” - length: 300 – 1,200 mm Scope of supply: complete extrusion press in working order with hydraulic and electric system Overhead pinch billet manipulator Material: AL 6000 Series Out of the scope of supply: floor frame mounted in the concrete floor all dies and tooling bolsters

1. Qty. 1 Second-hand slitting line Mfc.: DANIELI WEAN UNITED, LOOPCO, Built: 1994 Relocated: 2021 Raw Material CR, GI, COLOR COATING COIL Strip Width: 400 - 1,210 mm Thickness: 0.5 - 1.8 mm Slitter Stand (OD420 x ID255 10/15T=Each 30EA) Scope of supply: Uncoiler Coil Car with Coil Skid Uncoiler with Snubber Roll Coil Opener & No. 1 Pinch Roll Crop Shear Threading Table No. 2 Pinch Roll & Side Guide Slitter Stand Scrap Winder Loop Table Tension Pad with Separator Bridle Roll with Guide Table Recoiler with Separator Recoiler Coil Car with Coil Skid Hydraulic Equipment Electric Equipment 2. Qty. 1 Second-hand cut-to-length line Mfc.: DONGBU ENG Built: 1997 Reloc ...

Qty. 1 Second-hand overhauled 4-Hi cold rolling mill Mfc.: SUECO (Member of IHI Group) Material of rolling Series 5000 & 6000 The rolling mill has been bought in 2023 and total overhauled. All revamped and painted of mill housing, coiler, gear box, roll chock, and backup rolls etc. Installed new electrical controls, hydraulic system, work rolls and other essential components. Please note that the new owner invested USD 2.1 Million in 2023. Strip width: 400 – 600 mm (650 mm) Thickness: 0.05 – 2.0 mm Rolling speed: 300 m/min. Gear type: 3.5:1 ID 508 mm OD 1500 mm Coil weight: 5000 kg Work roll dia.: 200 mm (200 – 180 mm) Length: 740 mm Back-up roll dia.: 650 mm (650 � ...

STRIP WIDTH: 750 MM, ENTRY THICKNESS: 0.5 MM, EXIT: 2 x 0.007 MM,  ...

• more information

Fliss bohrer and thread rolling NC machine. Machine was rebuilded in 2019, complete Hardwere, and pneumatic components, and part from electric. Machine can be used for serial tube production, can be aded Robot for manipulating. Machine will be able to connect with a handling robot for fast delivery and high productiion.

all stainless steel belt width 600 mm to form meat balls from 6 to ± 80 gr suitable to put in line with a forming machine (VM 400) adjustable speed mobile dimensions (l x w x h) : ± 1.300 x 700 x 1.500 mm  ...

• more information

Heidenhain ROD 800.0000 - 36000 Id.Nr. 298 466 06 Incremental angle encoders with self-bearing Series: ROD 800 System accuracy ± 1" Mechanically zul. Speed 1000 min–1 Interface: » 1 VSS Scope of supply: 1 piece Item condition: NEW More items - new and used - can be found in our shop! International shipping costs on request!