We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Skid similar but no Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High pressure pump: Falch xs31.1-30-500 30l/min. at 500bar (year of construction 01/08) - Motor: Electric 30kW - 1250l water tank - Pressure gauge - Pressure regulator - Safety valve - Powder-coated steel frame - Aluminium covers - Forklift tabs and crane eyelets - Dimensions with 1250l water tank: approx. 1,100 x 1,760 x 1,770 - Empty weight: approx. 1,500 kg - Year of construction: 2013 - Operating hours: approx. 1500 h
TTMC SAEULENBOHRMASCHINE TYP T25 -MK3 -105/2900 t/m -2 toeren motor -Noodstop -Shearmkap -Documentatie -400V Beyhhatxyi DUTCHMACH Metal processing machines ENSCHEDE-NIEDERLANDE (3 km from the German border) ...
Brand: Martin Type: T25 M-No.: V172604 Year of construction: 1990 Motor power: 5/6 kW Swivel milling spindle: -5° - +45° Milling mandrel : 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Cone of the milling spindle: MK5 Table size: Table extension 2,500 mm and table distribution (= extendable support) Automatic milling spindle start-up/bremzing via rotary knob Control panel: eye level with digital reading Spindle height -5° - +45° electromotive angle adjustment with digital readout Inclination -5° - +45° 150 mm Electromotive heights Adjustment with digital readout Feed: five-pole. Socket with operation via central control
Brand: Martin Type: T25 M-No.: V 245411 Year of construction: 1997 Motor power: 5/6 kW Swivel milling spindle: -5° - +45° Milling mandrel : 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Cone of the milling spindle: MK5 Table size: Table extension 2,500 mm and table distribution (= extendable support) Control panel: eye level with digital display, stop position with digital display Spindle height 150 mm electromotive heights adjustment with digital readout Inclined position: -5° - +45° electromotive angle adjustment with digital readout Feed: 4 roll feed device Optional: Stop: Aigner Integral stop Milling protection cover: Aigner ...
Martin T25 swivel spindle cutter with 5 axis control Brand: Martin Type: T25 M-No.: V232232 Year of construction: 1996 Engine power: 7.5 / 9.5 kW or 10 / 13 HP, 2 speeds Dalander engine Swivel milling spindle: -5° - +45° Milling mandrel ø30 mm Spindle holder: ISO quick change system with 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Table size: Table extension 2,500 mm and table distribution (= extendable support) Control panel: NC control at eye level with LCD screen Spindle height NC-controlled electromotive angle adjustment (program controlled or manual operation) Inclination -5° - +45° NC-controlled electromotive spindle height ...
Product number: 2755J Type: T250 Serial number: 115818 Year of construction: 2007 Dye: 320 x 215 mm Tray height: max 130 mm Vacuum pump: Busch, 100 m³/h Compressed air: 7 - 10 Bar Water: 1.5 - 4.5 bar, 35 l/h Power: 3 x 415V, 50Hz, 6.2kW Dimensions: 1000 x 800 x 1600 mm Weight: 425 kg ...
General SKU307S484 LocationBarneveld MakeTrefa Continu Aerating Systems B.V. (NL) TypeT250 No.025.282 Year of construction2004 Main Features MaterialStainless steel Motor7.5 KW Rotor168 mm Specified Features - Foam mixer Rotor/Stator with pinscheck Rotor sizesdia.168x175mm Inletdia. 25mm Outletdia. 25mm With jacketcheck Motor7.5kW 380/420 Volt With frequency controllercheck Rotor speedmax. 604 Rpm Capacitymax. 360 l/h air @ max. 10 bar MaterialStainless steel Information Mounted on stainless st. framecheck With switchgear(as is) Total height2.2 M Weight600 Kg CEcheck Floorspace0.9x1.6 MFoam mixersTrefa AeratingMixers > Foam mixersBrand > Trefa Aerating What you c ...
Used new three-jaw chuck RÖHM DURO T250. Wedge bar chuck Three-jaw chuck incl. 3 snap fasteners ♦ cylindrical receptacle for spindle flange Pictures: Three-jaw chuck No. 437478-1526 ♦ with as good as new base jaws and new top jaws: ♦ with feed key included: Due to the weight, the lining, should only be can be picked up or sent by a freight forwarder. If you have any questions, please do not hesitate to contact us.
The machine has a quickly changing knife gap with sheet thickness reading and a constant knife angle. 9 kW motor. Weight 4.5 tons. Electric bumpers with reading, bumper departure 850 mm. Supports for supporting sheets of metal at the front of the machine, with a ruler for cutting at an angle of 90 degrees. Original O&M documentation and occupational health and safety manual in Polish. The guillotine cuts sheet metal from 0.8 to 6 mm. The machine is functional, the cutting knives are 90% new.
Make : MULTIVAC Model : TS 250 Y.o.m : 2009 Condition : Good ...