Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields cutting width 500 mm cutting height 120 mm min. material length 800 mm max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm engine power 45 kW two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm receiving table 6200 mm chain width 60mm seven pressure rollers two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 18 ...

Multisaw Edger ZLT 500 with feeders 500/140 - Czech production - a movable target TECHNICAL PARAMETERS: cutting width 500 mm cutting height 140 mm min. material length 800 mm max. blade diameter 450 mm one movable target engine power 30 kW four lower pulling shafts two upper pressure shafts feed smoothly regulated on the inverter shaft steady two rows of pawls feed rolls 4 pieces roll length 600 mm roll width 450 mm roll diameter 70 mm receiving table 6200 mm chain width 60 mm seven pressure rollers two lower pulling rollers transport dimensions (length / width / height) 700/245/180 cm weight 3000 kg

DECKLAGEN PRODUCTION LINE TORWEGGE with WEINIG H22BL FINSIH LAYER PRODUCTION LINE ML-Presseen Torwegge Heating bed length 3 m Wood types FI, AI, LÄ, DG, ZI ML slat width 60 - 140 mm ML- Slat thickness 8 - 15 mm Rod width 25-45 Rod thickness 17-31 mm Possible. Carpet widths 1273 - 2073 mm Special widths 1000, 1700 mm Target capacity/layer 300 m2 LH 500 m2 19 - 31 mm Fi Functional principle continuous Plate length mm 10000 Plate width mm 6600 Workpiece thickness max mm 45 Pressing force t 10 Further technical data Workpiece thickness min mm 25 Input length min mm 450 Fugue glue press Yes The technical data are partly estimated. Actual values can be may differ. ...

Wire Mesh Trimming System Diameter: 2 - 6 mm possible, 3 versions available Suitable for: Industrial products - to cut the overhangs  ...

• more information

Baader 988 Trimming machine for salmon Condition: Good, working This is the high-speed trimming machine for salmon and trout. Make it possible to reduce manual work and increase quality and speed of cutting belly side, back side and surface of fillets. Due to advanced technology this unit calculates size and volume of every fish fillet before trimming. Average capacity: up to 50 fillets per minute. The optimal size of fish fillets for maximum product throughput and quality (LxW): up to 750 x 250 mm. Data of cutting stored in PC and parameters of trimming could be archived. Equipped with Baader 1517 Filet Transfer Unit.

Double lane and fully automatic trimming machine for salmon fillets. Due to advanced sensor technologies and fast calculating, this unit cuts fillets for optimal shape and economic configuration (all the the evaluates based on weight and shape of fillet). Capacity reaches up to 25 gillets per minute. Belt width: 200 mm (each lane). Approx. dimensions (LxWxH): 4500 x 1850 x 2200 mm.

Code: 0233 Brand: MCR - ITALY Model: EASY EDGE/5 - CE Standard Automatic edge bander for edging panels, veneer edges, PVC, solid wood, abs, etc. - CE Standard Technical data: Max edge thickness mm 5 Max panel height mm 80 Min panel height mm 10 Min panel width mm 80 Adjustable feed speed Composition: Gluing unit: Heat regulator glue tank - Heat regulator roller - Automatic strips loader End cutting unit consisting of 2 motors of 0, 37 kW - Blade diameter mm 125 - Blade inclination Fine trimming unit :allows the trimming of the top and the bottom of the applied edge - 2 motors Kw 0,37 - N° 2 combined Vidia cutters with inserts to 30° plus flat sharp Polishing unit - N ...

We offer a used Tetra Pak® A3 Flex 300V 1000ml Edge filling line in exceptional condition. Line components: -A3/ Flex 0300V aseptic filling machine. Format 1000ml Edge -Accumulator Harness Helix 50 m -Lid Capper Tetra Pak Capper 25 -Cardboard packer Tetra Pak CBP32 -Conveyors Highlights: – Excellent condition – Year of Make 2010 – Immediately available ex-factory UGM Germany The line includes the following components: FILLING MACHINE: Model: A3/Flex Year of make: 2010 Format: Edge Capacity: 7000 pph Volume: 1000 ml Working hours: 31843 ACCUMULATOR: Manufacturer: Hartness International Model: ACHX30-0700-50m Year of make: 2014 CAPPING MACHINE: M ...

FARO EDGE 2.7 M coordinate measuring arm was built in 2014. The efficient and productive portable measuring arm verifies the quality of workpieces of any shape by measuring components in 2D and 3D with an accuracy of ± 0.017 mm. The mounted measuring head and the non-contact laser scanning function also allow for comparative analysis of individual components and assemblies with CAD files. The machine has been designed with convenience and ease of use in mind, as evidenced by the excellent weight distribution and balance maintained. The FARO EDGE measuring machine consists of: – a 2.7 metre long measuring machine with base plate and probe, – battery and cables, – a removable hand ...

Cotumer Edge Trimmer COMPAGNIE DE TUYAUTERIE ET MECANIQUE REUNIES COTUMER Machine is in good condition ...

• more information