Fabbricante:
(Categoria: 307)
NUOVO Mulino Laboratorio Rotoli 170 x 465mm Descrizione allegata! Accanto a questo siamo in grado di offrire mulini di tutte le dimensioni da Labratory fino a 100 "(2500mm) per un prezzo interessante! Si prega di chiedere a noi!
chamber volume: 170 literuseable volume: -- literfriction: -- motor drive power: 800 kWCondition: used -Specification: internal mixer used as additional option: Rubicon batch-off plant- capacity approx.: 170 litres- rotor model: tangential design- drive controller: Allen Breadley- Control: Mitsubishi- Motor speed: 1,000 rpm- Gearbox: Panamax 9000 make Sumitomo- Rotor speed: 5.6 - 55.6 rpm- Chamber hardness: 45 -50 HRC- Motor: 800 kW - 1000 rpm - 380 V, 50 Hz- Moror make: Teco- Output: 27 tons/day- Cycle time approx.: 4 - 8 min- Height approx.: 7,500 mm- Weight approx.: 35,000 kg, incl. gearbox and motorAvailable as an option:- Batch-off system Make: Rubikon / Mattech- Cooling bars max.: 300 mm / 2x 80 ...
clamping force: 350 kNinjection volume: 59 cm³screw diameter: 25 mmplaten size: 400 x 400 mmCondition: used,Specification: injection moulding machine for rubber - used International size: 350-90 clamping unit:- clamping force: 350 kN- clamping platen size: 400 x 400 mm- Clear distance between tie bars: 270 x 270 mm- Mould installation height min.: 225 mm- Distance between clamping platens: max. 550 mm- Opening stroke max.: 325 mm- Ejector stroke: 125 mmInjection unit:- Screw diameter: 25 mm x 20D- Injection volume max.: 49 cm³- Injection part weight: 59 g/hp- Max. injection pressure: 1,860 bar- Screw circumferential speed: 37 m/min- Cylinder heating: 4x 900 W- Nozzle heating: ...
roll diameter: 550 mmroll length: 1500 mmrolls drilled: peripher Nip adjustment: hydraulisch 0total power requirement: 90 kWCondition: used, overhauled Specification: rolling mill 550 x 1500 mm - used- roll diameter: 550 mm- roll length: 1500 mm- monoblock - motor under the rolls- Fixed friction between the rolls- Rolls: peripherally drilled, for water cooling- Gap adjustments: NEW hydraulic- Hydraulic unit: NEW- tiltable steel material guide jaws- Rollers: mounted on bronze bushes with oil circulation lubrication via pump- new ball bearing slewing rings for connection to water circuit- Safety brake for EMERGENCY STOP- New AC motor 110 kW - 400 V - 50 Hz - New pan for receiving the mixture- Safety bars bi-directional- New electrical control cabinet with PLC system S7-1200 ...
roll diameter: 500 mmroll length: 1500 mmrolls drilled: Kernbohrung Nip adjustment: hydraulisch 0total power requirement: 110 kWCondition: used, overhauled Specification: rolling mill 500 x 1500 mm - used- roll diameter: 500 mm- roll length: 1500 mm- monoblock - motor under the rolls- fixed friction between the rolls- Rolls: with core bore, with central chamber for water cooling- Gap adjustments: NEW hydraulic- Hydraulic unit: NEW- tiltable material guide jaws made of steel- Rollers: mounted on bronze bushes with oil circulation lubrication via pump- new ball bearing slewing rings for connection to water circuit- New safety brake for NOT STOP- New AC motor 110 kW - 400 V - 50 Hz - New pan for receiving the mixture- Safety rods bi-directional- New electrical c ...
machine measurements: -- mmmachine weight: -- kgpower capacity: -- kWCondition: usedSpecification: dosing unit type SiloStar 922 A - second-hand- for dosing liquid silicone LS- container: 20 litre hobbocks and 200 litre drums- Power connection: 400V, 50Hz Equipment of the plant with:- Fardoser SPS P1- Mixer / material pressure regulator cooled with outlet valve- roll-in device- Pressure and material shortage protection- Machine connection outlet valve and pressure regulator- Pressure vessel ColourThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 1.300 kNinjection volume: 230 cm³screw diameter: 45 mmplaten size: 685 x 685 mmCondition: used,Specification: injection moulding machine for TPE - usedincluding Koch dosing unitclamping unit:- clamping force: 1.300 kN- heating platen size: 685 x 685 mm- Clear distance between tie bars: 470 x 470 mm- Mould installation height min.: 250 mm- Distance between platens max.: 900 mm- Opening stroke max.: 650 mm- Ejector stroke: 225 mmInjection unit:- Screw diameter: 45 mm x 18D- Injection volume max.: 230 cm³- Injection part weight: 210 g/hp- Max. injection pressure: 1,670 bar- Screw circumferential speed: 75 m/min- Cylinder heating: 4x 2,200 W- Nozzle heating: 600 W- Connection value: 3x 400 V, 50 Hz- Electrica ...
machine measurements: 2.200 x 1.200 x 2.260 mmmachine weight: 1.000 kgpower capacity: -- kWCondition: usedSpecification: automatic control machine for O-rings - second-hand rotary transfer machine with 16 pick-up stations- year of construction approx.: 2011 - pick-up stations: 16- measuring range: ID from 55 - 90 mm cord from 2,5 - 3,5 mm (ID 55 - 70 mm) cord from 2.5 - 4.5 mm (ID 70 - 90 mm)- Part throughput: approx. 3 - 4 seconds per part approx. 900 - 1,200 parts per hour approx. 21,600 - 28,800 parts per day- Technical application: surface defect and crack detection on O-rings- Sorting function: Good, Bad, Undefined- Dimensions LxWxH approx.: 2,200 x 1,200 x 2,260 mm- ...
screw ø:: 90 mmscrew length:: 20D screw speedl:: 0 - 60 U/minCondition: NEW,Specification: Rubber vacuum extruder - with warranty- Screw diameter: 90 mm- Screw length: L = 20 D (approx. 1,800 mm conveying length)- Screw speed: 0 - 60 rpm- Centre height of extruder: approx. 1,125 mm incl. base frame- Max. permissible injection pressure: 500 bar- with feed roller- Extruder water-tempered- Extruder base frame as welded construction, to accommodate the extruder with drive motor, the temperature control, the vacuum pump- Funnel piece with intermediate flange: two tempering zones approx. 4D = 480 mm- Vacuum cylinder: three tempering zones BL = 1,057 mm- End cylinder: one temperature control zone ...
machine measurements: -- mmmachine weight: -- kgpower capacity: -- kWCondition: used, Specification: drum-type blast deburring machine type: MEWO Rotor TS 60- batch volume approx.: 1-600 litres,- working temperature: - 150°C- drum speed: 5 - 30 rpm- Blast wheel speed: 1,000 - 9,500 rpm- Control: Siemens S7 SimaticThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cross-section width:: 700 mmcross-section heigth:: 500 mmfeed:: -- mmCondition: used, overhauledSpecification: splitter for rubber bales - overhauled with CE- cross section width max.ca.: 700 mm- cross section height max. approx.: 500 mm- cutting force approx.: 10 tons - AC motor: 4 kW, 400 V, 50 Hz- Infeed roller conveyor for product transport- Machine stands on a raised pedestal- Two-hand safety control for driving the blade movement- Safety guard according to current standards- New control cabinet- New on-board system machine- Operating and maintenance manual in English- CE marking- Paintwork: according to customer requirements- Refurbished with 1 year warranty- CE marking,Option:- Output roller conveyor newThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
machine measurements: 850 x 1.800 x 1.450 mmmachine weight: 360 kgpower capacity: 0,7 kWCondition: newSpecification: Powder coating machine, type: EPC-30/2EThe machine is designed for the powder coating of cables, hosesand profiles.- Product diameter max.: 30 mm- Product speed max.: 1,500 m/min- Powder throughput min.: 30 g/min with fine dosage- Powder throughput max.: 400 g/min per powder injector- Electrostatic: available as option- Connected load: 0.7 kW- Dimensions LxHxW: 850 x 1,800 x 1,450 mm- Weight approx.: 360 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cross-section width:: 100 mmcross-section heigth:: 40 mmfeed:: 2 - 999.999,9 mmCondition: new,Specification: Impact knife cutting machine CC-600/40 for hoses and profiles- contact length: 600 mm- product diameter: 40 mm- belt width: 100 mm- Tractive force: 400 N to 800 N- Drive: 2 drives upper and lower belt- Conveyor belt speed: 100 m/min- Drive feed, cutting motor: Servo drives- Cutting capacity with blade max.: 4,000 1/min- Connected load: 3.5 kW- Dimensions L/H/B: 1,900 x 1,650 x 960 mm- Weight approx.: 580 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 400 mmroll length: 1000 mmrolls drilled: Kernbohrung Nip adjustment: hydraulisch 0total power requirement: 45 kWCondition: used, overhauledSpecification: Rolling mill 400 x 1000 mm - second-hand monobloc model, motor under the rolls- roll diameter: 400 mm- roll length: 1000 mm- rolls: with core bore, with central chamber for water cooling- Rollers mounted on bronze bushes with oil circulation lubrication via pump,- equipped with new slewing rings for connection to the water circuit- Gap adjustment: hydraulic, NEW- Hydraulic unit NEW- Tiltable guide plates- stainless steel roller container to hold the mixture- bi-directional rods- safety brake for NOT stop- AC motor: 45 kW - 400 Volt - 50 Hz- Painting: in RAL colours according to customer ...
roll diameter: 560 mmroll length: 1500 mmrolls drilled: Peripher Nip adjustment: hyraulisch 0total power requirement: 150 kWCondition: used, completely overhauled, with warrantySpecification: rolling mill 560 x 1500 mm - used model external gearbox - motor sideways placed at the machine- roll diameter: 560 mm- roll length: 1500 mm- model: Duplocom / pluridrive- Peripherally drilled rollers for water cooling- Cardan joints between gearbox and rollers- Individual drive for the rollers, for variable friction- hydr. gap adjustment- Hydraulic unit- Tilting steel guide plates- rollers mounted on roller bearings with appropriate lubrication- rollers with new ball bearing slewing rings, make Maier, for the connection to the water circuit- One gearbox- two individual drives, each with: 2x 75 kW - 400 V - 50 ...
roll diameter: 550 mmroll length: 1500 mmrolls drilled: Kernbohrung Nip adjustment: hydraulisch 0total power requirement: 90 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
machine measurements: 1500 x 2400 x 1150 mmmachine weight: -- kgpower capacity: 12 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 200 °CTorque: - 0Dimensions (HxWxD): 680 x 1320 x 760 mmweight: 177 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 700 mmroll length: 2200 mmrolls drilled: Kernbohrung Nip adjustment: hyraulisch 0total power requirement: 160 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
screw ø:: 120 mmscrew length:: 17D screw speedl:: 42 U/mindrive power:: 138 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diametro rotolo: 250 mm lunghezza rotolo: 500 mmrotoli forati: Kernbohrung nip regolazione: mechanisch drive potenza:: kW
machine measurements: 3.000 mmmachine weight: -- kgpower capacity: 90 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 350 mmroll length: 700 mmrolls drilled: peripher Nip adjustment: hydraulisch 0total power requirement: 2x 15 kWCondition: new, with CE mark,Specification: Two Roll Mill 350 x 700 mm - new- cylinder diameter: 350 mm- cylinder length: 700 mm- cylinder boring: peripherally drilled- cylinder bearings: with grease lubrication- 2 cylindera chromed- nip admustment: hydraulically- new hydraulic unit- tipper guiding plates of nylon-polyethylen-material- stainless steel tray- bi-directional bars- AC brake motors: 2 pcs, each 15 kW, 400 V, 50 Hz- bevel gearboxes of transmission: 2 pcs- painting: with RAL colours acc. to customer’s specification- complete machine protection with stainless steel carters- new electric cabinet- new electrical system- new machine on-board system- new control panel Touchpanel 7- PLC system: 1 piece, brand S ...
chamber volume: 80 literuseable volume: -- literfriction: -- motor drive power: 390 kWCondition: used - overhauled - with warrantySpecification: Internal mixer used- Capacity: about 80 lts- Rotors model: tangential type with 3 wings- Command gearbox: semi-unidrive type- Max speed rotors: about 60 rpm- Closing system: drop-door type- Hydraulic unit for drop-door system- Pneumatic hopper for loading material- DC engine: 390 kW - 1500 rpm - 440 V- New electric cabinet with driving system for variable speed of rotors- N.1 new electric panel- New on board electric system on the machine- Safety devices in according to standard rules- Manual of use and maintenance in English language and CE marking- Reconditioned and guaranteed machine in according to standard rules- Warranty: 1 yearThe data for this ad was created with ModulMWS - the software solution ...
cross-section width:: -- mmcross-section heigth:: -- mmfeed:: -- mmspeed of feed:: 0,4 - 20 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cross-section width:: 85 mmcross-section heigth:: 25 - 40 mmfeed:: 1 - 999,999,9 mmspeed of feed:: 60 m/mincuts max.:: 100 - 120 Schnitte/mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
screw ø:: für Extruder 90 mmscrew length:: -- screw speedl:: -- U/mindrive power:: 13,6 kWCondition: little used, as good as newSpecification: gear pump ZP 75/50 for extruder size 90- SEW helical gear units: R 97- Siemens direct current motor: 1 GG5 118- Drive power: 13.6 kW, 57 A- curved tooth coupling- With clamp for the head connection,- Clamping flange for extruder and head connection,- Base plate with linear guide rails,- Tooth shaft diameter: 75 mm- tooth width: 50 mm- helical gearing, hardened steel bearings, right-hand drive- without controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 400 mmroll length: 1100 mmrolls drilled: Kernbohrung Nip adjustment: hydraulisch total power requirement: 2x 30 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cross-section width:: 5 Schläuche 3-5 mmcross-section heigth:: 3 - 20 mmfeed:: 1,5 - 50 mmCondition: used, very good condition only approx. 1 year in productionSpecification: circular knife cutting machine for slices and rings- small cutting machine with high-speed rotating circular knife- feed and knife movement, pneumatic- Tube or strand diameter min.: 3 mm- Tube or strand diameter min.: 20 mm- Feed (ring or strand length): 1.5 - 50 mm- Output depending on material max.: 60 strokes/min- Optionally, the following can be cut 5 tubes or strands: diameter 3 mm to 5 mm 4 tubes or strands: diameter 5 mm to 7 mm 3 hoses or strands: diameter 7 mm to 12 mm 2 hoses or strands: diameter 12 mm to 15 mm 1 hose or string: diameter 15 mm to 20 mm- Power requir ...
clamping force: 450 kNinjection volume: 135 cm³screw diameter: 35 mmplaten size: 600 x 400 mmCondition: used,Specification: C-frame injection moulding machine for TPE - usedclamping unit:- clamping force: 450 kN- heating platen size: 600 x 400 mm- sliding table: yes- Clamping direction: from below- Ejector / lifter: Up + LoInjection unit:- Injection volume max.: 135 cm³- Screw diameter: 35 mm- Connected load: 3x 400 V, 50 Hz- Weight approx.: 5,500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pelmar Engineering Germany GmbH
