altre macchine per plastica usati in vendita

Year of construction: 1995,  motor output 15.6 kW, for further details see photos on the type plate2600x600x1000 mm1500 kguncheckedloaded on truck

heater 30 kW1400x980x1095 mm200 kguncheckedex foundation, unpackaged

drying volume: 100 litres  technical documentation included, e.g. operating and service manual   please also have a look at the PDF documents of this machine600x700x1050 mm150 kguncheckedloaded on truck

drying volume: 100 litres  technical documentation included, operating and service manual   please also have a look at the PDF documents of this machine600x700x1050 mm150 kguncheckedloaded on truck

Larghezza rotore 1000 mm Ingresso 900 x 1000 mm Potenza motrice 30 kw Motore, impianto idraulico, impianto elettrico completamente revisionato

Le principali macchine della linea: miscelatore per fluidi Trusioma caldo e freddo BUS PER IMPASTATRICE KO Mulino miscelatore Buzuluk 660x2100 mm Calandra a 4 rulli Buzuluk 700x1800 mm, a "L" rovesciata Dispositivo di tempra e stiratura dietro la calandra – rulliera dispositivo di misurazione del profilo dello spessore del film dispositivo di avvolgimento

REFAKT Essiccatore/Centrifuga/Tintoria Precedentemente utilizzato per l'essiccazione centrifuga di rifiuti plastici. Capacità produttiva da 300 a 1000 kg/h, a seconda del tipo di plastica e dello spessore delle pareti. Potenza motrice 30 kw

Essiccatore / Essiccatore centrifugo / Lavaggio a secco Può essere utilizzato per rifiuti plastici pre-triturati (plastica dura, pellicole), Produttività a seconda del tipo di materiale circa 0,5-2 t/h Potenza motrice 30 kw

Nastro trasportatore / nastro trasportatore Larghezza cinghia: ca. 300mm Distanza dell'asse: circa 3.130 mm Azionamento: 0,75 kW nuovo - solo molto breve in uso

Nastro trasportatore / nastro trasportatore Larghezza cinghia: ca. 1.400 mm Distanza dell'asse: ca. 8.000 mm Azionamento: 2,2 kW

Table height: 850mm, cutting width/ height: 1200/ 850mm, saw band length: 7050mm, saw band thickness: 0.5mm, weight: 500kg.

Four Regloplast Smart series temperature control units are available. 3x Regloplast 90Smart, year of manufacture: 2018/2018/2016, T. max.: 90°C, dimensions X/Y/Z: approx. 200mm/560mm/600mm, weight: approx. 50kg, some float switches and display defective. 1x Regloplast P140Smart, year of manufacture: 2020, T.max.: 140°C, dimensions X/Y/Z: approx. 200mm/560mm/600mm, weight: approx. 50kg. Documentation available. On-site inspection is possible.

Without documentation.

There are two identical presses available, max. stroke speed: 200mm/s, oil viscosity: 46cSt a 40°C, max. hydraulic/operating pressure: 25/ 210bar, weight of the half tool: 10t, pump power at 75/ 210bar: 200/ 70l/min, pump motor power: 30kW, weight: 25t.

Pneumatic pressure: 8bar, connected load: 2kW, weight: 550kg, without documentation, spare parts or accessories, was maintained regularly.

Pressing force: 180kN, total stroke: 250mm, power stroke: 12mm, max. compressed air supply: 6bar.

Stroke: 100mm, max. electrode distance: 230mm, electrode distance: 20kN, controls: Siemens S7-1500, with documentation, was hardly used.

Working width: 1250mm, working height: 100mm, with scoring and milling aggregate, with control cabinet, without documentation, manufacturer unknown, either Homag or Bäuerle.

Compressed air supply: 6.5bar, connected load: 2.3kW, weight: 180kg.

Compressed air supply: 6bar, connected load: 1kW, weight: 120kg, the machine has defective pneumatics.

There are three Concept Laser M1 3D printers available, year of construction machine 1/ 2/ 3: 2009/ 2010/ 2012, operational hours counter machine 1/ 2/ 3: 82,046/ 93,781/ 68,167h, with Laser Rofin StarFiber 200, water cooling, screening machine and documentation, at machine 1 the laser is broken and the machine is without optics, machine 2 is fully functional, machine 3 is fully functional, but a machine software error occurs regularly, which has to be fixed, afterwards production can always be continued, an inspection is possible,

Usable length: 3000mm, load: 50kg/m, connected load: 1.5kW, length: 3500mm, width: 550mm, weight: 208kg.

Connected load: 2000W, weight: 80kg.

There are three identical machines available, including documentation.

A Graewe planetary saw (inline pipe saw) is available. Max. pipe diameter: 500mm, power: 7.5kW, machine dimensions X/Y/Z: approx. 3500mm/1800mm/2000mm, weight: approx. 3200kg. Documentation available. On-site inspection is possible.

A planetary saw (inline pipe saw) IPM is available. Max. pipe diameter: 400mm, power: 7kW, machine dimensions X/Y/Z: approx. 4500mm/2000mm/2300mm, weight: approx. 7000kg. Documentation available. On-site inspection is possible.

Output: 50-300kg/h, operational hours counter: 10h, with edge trim extraction.

There is a complete underwater pelletizing system with vibrator, heat exchanger, centrifuge, extruder, pelletizer, water basin, sieves, knife blocks, documentation and other spare parts available, a sieve changer is available separately, an inspection is possible.

Loading chamber dimensions: 280x580mm, loading height: 700mm, max. load: 300kg, with protective housing and documentation, machine was functional until the end, complete maintenance would have to be carried out on the machine, inspection is possible.

There is a complete pultrusion line with three Krauss Maffei RimStar Nano pumping machines, three creels, ABUS column-mounted slewing jib crane and a KraussMaffei EW 2300 CFI winder, tensile force: 10t, max. profile dimensions: 300x50mm, max. speed: 4m/min, on-site inspection is possible.