altre macchine per lo smaltimento dei rifiuti e il riciclaggio usati in vendita

GB: 750 mm AA: 1.590 mm Diametro del tamburo: 320 mm Azionamento elettrico da 1,5 kW Magnete: 832 x 526 x 234 mm

Capacità: 56 cbm Costruzione di segmenti imbullonati con scivolo di scarico con robusta struttura in acciaio

6 viti a spirale, volume totale: circa 55 cbm, consiliamento del volume circa 150 cbm/h, unità 3 x 11 kW, velocità: 6-18 rpm per la trasmissione e il dosso di vari materiali sfusi (ad es. EBS, biomassa, trucioli di legno)

Good day We hereby offer you a used machine for the production of packaging cushions from old cardboard packaging including a suitable dedusting system. Manufacturer cp cushion pack GmbH & Co. KG, Germany Packaging cushioning machines Type CP 422 S2i/6 Year of construction 2020 Drive power 1.5 kW Upholstery width 420 mm Inlet height 18 mm Production capacity approx. 4 – 6m³/hour Working height 870 mm Feed speed 13 m/minute Motor power 1.5 kW Noise emission at no-load 60 dB(A) Noise emission in the duty cycle 68 dB(A) Dimensions 1010 x 660 x 660 mm (H x W x D) Weight approx. 125 kg Uses: With this machine, you can easily make your own packaging cushions from old cardboard. This is sustainable, environmentally friendly and saves the purchase of packaging cushions. The machine was used to recycle clean cardboard die-cutting residues from a die-cutting machi ...

Buona giornata Vi offriamo un sistema di smistamento OCC usato composto da un picchetto di carta, tipo 2000, del produttore Grumbach und Petermann GmbH, con un nastro di prelievo della carta, Bollegraaf tipo HBGT 1200 x 4760 15 e un vaglio a stella a un piano, fine, produttore Lubo Screening & Recycling Systems B.V. Le macchine sono state smontate fino al telaio di base, deruggine, primerizzate e infine verniciate. Sono stati sostituiti gli alberi e le stelle in gomma difettosi, le cinghie trapezoidali e le punte del PaperSpike, nonché i cilindri pneumatici. Tutti i cuscinetti e le catene di trasmissione sono stati sostituiti e i motori e le trasmissioni sono stati controllati. Una visita è possibile su appuntamento. Non ci assumiamo alcuna responsabilità per le informazioni tecniche o per eventuali errori. Saremmo felici se questa macchina fosse interessante per te. Il ...

Nastro trasportatore Marchio: LKOREMAN Larghezza del nastro: 500 mm A.A Lunghezza = 6000 mm Potenza richiesta: Cambio slip-on 2 kW Disponibile: 2 pezzi A.A Lunghezza = 10000 mm Potenza richiesta: mototamburo 1,1 kW Disponibile: 1 pezzo

Motor power: 55kW, length: 14,900mm, width: 6800mm, height: 4000mm, operational hours counter: 30h.

Connected load: 15.5kW, weight: 6.8t.

Weight: 5.65t.

With conveyor belt, blower, shredder, screw, drum and screen.

Pressing force: 50t, opening dimensions: 870x1500mm, bale dimensions: 1500x1100x1100mm, bale weight: 450kg, length: 1524mm, width: 2100mm, height: 3217mm, weight: 1.93t, operational hours counter: 18h.

Motor power: 90kW, with control cabinet, the vertical crusher is located in an enclosure.

Min. output: 20t/h, wear plates: 13x Pos. 3, 14x Pos. 9, 20x 325x250mm, 28x 120x160mm, 18x 250x250mm, 23x 150x380mm, with blow bars, jaws, metering channel and 4x set screws with collar.

A vertical baler for paper and cardboard is available. Motor power: 0.75kW, machine dimensions X/Y/Z: approx. 1200mm/1000mm/2000mm, weight: approx. 1200kg. On-site inspection is possible.

Qn: 47l/min, Qv: 2750l/min, Hn: 75mm²/s, Δp: 5bar, P: 1.5kW.

Working width: 1600mm, infeed cross-section X/Y: 1600mm/2300mm, main drive: 75kW, 1500rpm, rotor flight circle: 600mm, rotor speed: approx. 85rpm, number of cutting tools: 42, screen design: perforation 40mm. Dimensions X/Y/Z: 5015mm/2650mm/2935mm, weight: approx. 14000kg. Documentation available.

Working width: 1400mm, infeed cross-section X/Y: 1400mm/1600mm, drive: 45kW, 1500rpm, rotor flight circle: 380mm, rotor speed: approx. 105rpm, number of cutting tools: 52, screen design: 12mm perforation, screen diameter: 30mm, hydraulic unit: 2.2kW, 1420rpm. Dimensions X/Y/Z: 2740mm/2270mm/2390mm, weight: approx. 5400kg. Documentation available.

A wastewater treatment plant based on batch treatment from Antech Gütling (AGW), which was used in the printed circuit board industry (electronics), is available. It consists of a waste water collection station, a batch treatment, a chemical dosing station, a sludge treatment, a post-filtration/pH final control and an exhaust air scrubber. The system treats rinsing water, acidic and alkaline concentrates as well as waste water from the resist developer, resist stripper and solder resist developer areas. The system does not treat solvents, paints, hydraulic oils, used etchings (ammoniacal/acidic), waste water containing chlorite or EDTA-based chemical copper. Capacity: approx. 3m³/h. Documentation is available.

Working speed: 200-250m/min, max. working capacity: 300kg/h, cutting wheel diameter: 200mm, pressure cylinder diameter: 102mm, control: Omtron.

A Big Komet 12 press is available. Pressing force: 120kN, dimensions X/Y/Z: approx. 4000mm/1100mm/1100mm, weight: approx. 5000kg.

A Big HK 25 press is available. Pressing force: 250kN, dimensions X/Y/Z: approx. 5600mm/1100mm/3900mm, weight: approx. 5000kg.

A Mecatex shredder for wool is available. Number of rotor knives: 45, number of fixed knives: 6, number of knife holders: 2, working length: 1000mm, motor power: 37kW, max. production capacity: 1000m²/h. Control cabinet dimensions X/Y/Z: approx. 600mm/420mm/2000mm, control cabinet weight: approx. 80kg. Machine dimensions X/Y/Z: approx. 1500mm/1500mm/2600mm, machine weight: approx. 2500kg, operating hours: approx. 900h. The hydraulics for tilting the hopper are defective. Documentation available. On-site inspection is possible.

Rotor diameter: 260mm, rotor blades: 3, stator blades: 2, motor power: 7.5kW, throughput: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1600mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible.

Six (6) identical pneumatic knife-gate valves Watergates are available. Housing: stainless steel, valve blade: stainless steel, max. operating pressure: 4bar, medium temperature range: -35°C-120°C, machine length: approx. 1873mm, machine diameter: approx. 382mm, weight: approx. 280kg. Documentation available. On-site inspection is possible.

Inlet dimensions X/Y: 600mm/580mm, rotor width: 850mm, rotor diameter: 450mm, rotor blades: 3, power: 75kW, weight: approx. 3000kg. Available from middle of November 2024.

Motor power: 37kW, rotor diameter: 500mm, rotor width: 790mm, cross-section: approx. 500mm/790mm, stator blades: 2-row, rotor: 6 blades left and right. Including cyclone, pipes, blower, 3 sets of knives and sieves with a diameter of 6mm/8mm/10mm. Grinding capacity: 6 sieve: 150kg/h, 8 sieve: 300kg/h, 10 sieve: 400kg/h. Documentation available. On-site inspection is possible.

A hydraulic, vertical Dixi baler is available. Motor power: 4kW, pressing force: 180kN, pressing time: 12s, cycle time: 22s, filling opening X/Y: 1070mm/620mm, working height: 98mm, bale dimensions X/Y/Z: approx. 1100mm/700mm/800mm, bale weight: approx. 120kg-180kg. Machine dimensions X/Y/Z: approx. 1550mm/950mm/2000mm, weight: approx. 850kg. Documentation available. On-site inspection is possible.

A Gross Apparatebau GmbH shredder, which was used in the wood industry, is available. Feed opening X/Y: 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm-40mm, suction nozzle diameter: 160mm, machine dimensions X/Y/Z: approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation available. On-site inspection is possible.

494 / Numero pos.: 171 Descrizione: Benna ribalta trucioli Anno di fabbricazione: 1991 Descrizione: Codice produttore 30671, portata 1.250 kg, peso proprio 226 kg, con supporto per carrello elevatore

494 / Numero pos.: 170 Descrizione: Benna ribalta trucioli Anno di fabbricazione: 1995 Descrizione: Codice produttore 385332, volume 1 m³, portata 2.000 kg, peso netto 261 kg