Производитель:
(Категория: 307)
Key data: 550 mm, 1500 mm
Прокатный станок 550 × 1500 мм, произведённый Bata в 1937 году. Эта историческая машина полностью функциональна и может использоваться как в производстве, так и в качестве выставочного экспоната.
Key data: 300 mm, 600 mm
Диаметр: 300 мм Длина: 600 мм Поверхность: гладкая Настройка NIP: manual Двигатель: 30 кВт Siemens Размеры: примерно 1700 x 1560 x 1635 мм Вес: примерно 3000 кг Маркировка CE с 2018 года (двигатель с задним ходом, аварийная остановка колена)
Лабораторный пресс для тестовых пластин, производство RUCKS, построен в 1998 году, 2 этажа электрически отогреваемые, Сила нажатия 440 кН, максимальное рабочее давление 250 ба
Порошковая машина Fabikat PEKU с шириной прохода 1000 мм для порошка сверху и снизу Пластины, профили, шланги и так далее.
вакуумный экструдер холодной подачи Troester 90 мм x 18 D, с подающим роликом, привод 46 кВт, скорость пирога от 10 до 60 об/мин, 5 ТКУ,
экструдер холодной подачи - 60 мм x 18 D вакуум, с подающим роликом, привод 22 кВт, скорость вращения шнека от 10 до 60 об/мин, с шестеренчатым насосом, 5 TCU,
Экструдер холодной подачи 90-х годов, GE 90 x 16 D Vac, марки Troester, с большим шлангом / профильной распылительной головкой, привод 52 кВт Siemens AC, 4 TCU Siengle
Грузоподъемность 75 кг Производительность макс. 800 кг/ч Вес заготовки 0,25 - 3100
Преобразователь-экструдер с ручкой холодной подачи 120 мм, GE 120 SC, производства Berstorff, производительность до 1 000 кг/ч в качестве силового экструдера с полосовой распылительной головкой, полная механическая и электрическая модернизация в 2024 году
Key data: 400 mm, 1000 mm
Бузулук 14231 Конверсия CE в 2010 году Подшипник качения Двигатель: 55 кВт Моторизованная регулировка зазора Опорной плит
3-5 катушек каландр Бузулук Количество барабанов: 4 шт. Диаметр рулона: 150 мм Длина рулона: 400 м
Press force: 2800kN, heating platen size X/Y: 500mm/500mm, daylight between the heating platens: 200mm, max. hydraulic pressure: 300bar, heating power: 9.4kW, drive power: 7.5kW, control: Siemens S5 with OP17, weight: approx. 5000kg. Equipped with sliding table, vacuum pump, vacuum chamber and vacuum receiver tank. An on-site inspection is possible.
Press force: 2800kN, heating platen size X/Y: 500mm/500mm, daylight between the heating platens: 200mm, max. hydraulic pressure: 300bar, heating power: 9.4kW, drive power: 7.5kW, control: Siemens S5 with OP17, weight: approx. 4500kg. Equipped with sliding table, vacuum pump, vacuum chamber and vacuum receiver tank. An on-site inspection is possible.
A Klöckner DESMA rubber injection molding machine with increased clamping pressure is offered. Material processing: rubber, clamping force: 4500kN, min./max. mold height: 180mm/530mm, adjustable opening stroke: 570mm, clear distance between tie bars X/Y: 600mm/810mm, max. clamping area X/Y: 670mm/940mm, heating platen size X/Y: 670mm/940mm, injection: from above, max. injection volume: 3300cm³, injection force: 1886kN, max. injection pressure: 2150bar, screw diameter: 55mm, injection plunger diameter: 105mm, operating pressure: 250bar, number of control zones: 12, heating capacity per control zone: 21kW, ejector: hydraulic top and bottom, ejector slot spacing: 730mm. The machine is currently not operational because the control cabinet of the DRC 2000 (Simatic S7) is already being used elsewhere and is not part of the machine. Documentation available. Inspection possible by arrangement.
machine measurements: -- mmmachine weight: -- kgpower capacity: -- kWCondition: used, Specification: drum-type blast deburring machine type: MEWO Rotor TS 60- batch volume approx.: 1-100 litres,- working temperature: - 150°C- drum speed: 5 - 30 rpm- Blast wheel speed: 1,000 - 9,500 rpm- Control: Siemens S7 SimaticThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
specimen dia.: - mmlength of specimen: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mVolumetric samples - cutter / sample punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 500 mmroll length: 1500 mmrolls drilled: Kernbohrung Nip adjustment: hydraulisch 0total power requirement: 110 kWCondition: used, overhauled Specification: Rolling mill 500 x 1500 mm - second-hand- roller diameter: 500 mm- roll length: 1500 mm- monoblock motor under the rollers- Fixed friction between the rollers- Rollers: with core bore, with central chamber for water cooling- Gap adjustments: NEW hydraulic- Hydraulic unit: NEW- Tilting material guide jaws made of steel with mechanical with mechanical safety interlock- Rollers: mounted on bronze bushes with circulating oil lubrication via pump- New Johnson-Fluiten ball swivel joints for connection to water circuit to water circuit- New safety brake for EMERGENCY STOP- New AC moto ...
roll diameter: 250 mmroll length: 500 mmrolls drilled: Kernbohrung nip adjustment: mechanisch drive power:: kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
machine measurements: 3.000 mmmachine weight: -- kgpower capacity: 90 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 700 mmroll length: 2200 mmrolls drilled: Kernbohrung Nip adjustment: hyraulisch 0total power requirement: 160 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Press force max.:: 3000 kNheating plates:: 600 x 630 mmelectrically heated:: °Cheating power:: kWpiston stroke:: 420 mmno. of stages:: 1 Condition: Used, reconditionedSpecification: Press 600 x 630 mm, second-hand- clamping force: 300 tonnes (3,000 kN)- closing: from bottom to top- Heating platens: 2 electric platens, with new heating rods- Heating platen dimensions approx.: 600 x 630 mm- Distance between the heating platens approx.: 420 mm- New electric valves- AC machine output oil pump: 5.5 kW- New control cabinet with Siemens 7’ touch panel- PLC control system make Siemens S7-1200- New cabling- Frequency inverter made by Schneider- Light barriers in the front area,Overhauled in accordance with CE standard safety regulationsOperating instructions and maintenance instructions in GermanWarranty: 1 yearThe data for this ad was created with ModulMWS - the sof ...
0: 200 °CTorque: - 0Dimensions (HxWxD): 680 x 1320 x 760 mmweight: 177 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
machine measurements: 1500 x 2400 x 1150 mmmachine weight: -- kgpower capacity: 12 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 550 mmroll length: 1500 mmrolls drilled: peripher Nip adjustment: hydraulisch 0total power requirement: 110 kWCondition: used, overhauled Specification: rolling mill 550 x 1500 mm - used- roll diameter: 550 mm- roll length: 1500 mm- monoblock - motor under the rolls- Fixed friction between the rolls- Rolls: peripherally drilled, for water cooling- Gap adjustments: NEW hydraulic- Hydraulic unit: NEW- tiltable steel material guide jaws- Rollers: mounted on bronze bushes with oil circulation lubrication via pump- new ball bearing slewing rings for connection to water circuit- Safety brake for EMERGENCY STOP- New AC motor 110 kW - 400 V - 50 Hz - New pan for receiving the mixture- Safety bars bi-directional- New electrical control cabinet with PLC system S7-120 ...
screw ø:: 60 mmscrew length:: 11D screw speedl:: -- U/mindrive power:: 18,5 kWCondition: used, reconditionedSpecification: rubber extruder – used- Screw diameter: 60 mm- Screw length approx.: 11D- New screw- Cylinder refurbishment- Feed roller refurbishment- New safety cage- New rotary joint for water- New AC motor: 18.5 kW- New control cabinet with Siemens S7-1200 PLC system- New control panel with Siemens KTP700 Basic touch panel- New Siemens G120 frequency converter for variable speed- Remote maintenance device- New cabling- Pressure sensors on the extruder head- Safety device- CE marking and an operating and maintenance manual in EnglishRefurbished in accordance with CE standard safety regulationsWarranty: 1 yearOption: TCU for temperature control of the water up to 95°C, for placement near the extruderThe data for thi ...
clamping force: 2.700 kNinjection volume: 6.000 cm³screw diameter: -- mmplaten size: 560 x 630 mmCondition: second-hand,Specification: rubber injection moulding machine - second-hand, partially dismantled, but would be restored to its previous condition EUROMAP size 2500 – 7000Clamping unit:- Clamping unit: vertical- Clamping force: 2.700 kN- Platen size: 560 x 630 mm- Max. stroke: 550 mm (see data sheet) Injection unit:- Max. injection volume: 6,000 cm³- Injection pressure: 2150 bar- Power supply: 3x 400 V, 50 Hz, N, PE- Motor power: 28,2 kW- Installed heating capacity: 49,9 kW- Weight: Clamping unit approx.: 6,040 kg Injection unit approx.: 2,700 kg Hydraulic un ...
clamping force: 4.500 kNinjection volume: 3.300 cm³screw diameter: -- mmplaten size: 670 x 780 mmCondition: second-hand,Specification: rubber injection moulding machine - second-hand EUROMAP size 4000 – 7000Clamping unit:- Clamping unit: vertical- Clamping force: 4500 kN- Platen size: 670 x 780 mm- Max. stroke: 600 mm (see data sheet) Injection unit:- Max. injection volume: 3,300 cm³- Injection pressure: 2150 bar- Power supply: 3x 400 V, 50 Hz, N- Motor power: 35,5 kW- Installed heating capacity: 73,9 kW- Weight: Clamping unit approx.: 8,400 kg Injection unit approx.: 2,700 kg Hydraulic unit with oil and control cabinet 2,200 kg Additional equipment (approx.): 3,000 kg ...
clamping force: 4.500 kNinjection volume: 5.600 cm³screw diameter: 610 - 985 mmplaten size: 670 x 780 mmCondition: second-hand,Specification: rubber injection moulding machine - second-hand EUROMAP size 4500 – 12300Clamping unit:- Clamping unit: vertical- Clamping force: 4500 kN- Platen size: 670 x 780 mm- Max. stroke: 610 - 985 mm (see data sheet) Injection unit:- Injection unit type: ADV- Max. injection volume: 5,600 cm³- Injection pressure: 2200 bar- Power supply: 3x 400 V, 50 Hz, N, PE- Pump capacity: 27 kW- Weight: Cutting unit approx.: 10,200 kg Injection unit approx.: 3,500 kg Hydraulic unit with oil: 2,600 kg Accessories approx.: 4,700 kg Total weight approx.: ...
clamping force: 4.500 kNinjection volume: 5.000 cm³screw diameter: -- mmplaten size: 670 x 780 mmCondition: second-hand,Specification: rubber injection moulding machine - second-hand EUROMAP size 4500 – 10000Clamping unit:- Clamping unit: vertical- Clamping force: 4500 kN- Platen size: 670 x 780 mm- Max. stroke: 600 mm (see data sheet) Injection unit:- Max. injection volume: 5,000 cm³- Injection pressure: 2060 bar- Power supply: 3x 400 V, 50 Hz, N, PE- Motor power: 38 kW- Installed heating capacity: 67.5 kW- Weight:Clamping unit approx.: 8,900 kgInjection unit approx.: 3,200 kgHydraulic unit with oiland control cabinet 2,350 kg- For dimensions, see the installation data in the appe ...
clamping force: 300 kNinjection volume: 180 cm³screw diameter: -- mmplaten size: 300 x 300 mmCondition: second-hand,Specification: C-frame injection moulding machine for rubber - second-handClamping unit:- Clamping unit: vertical- Clamping force: 300 kN- Platen size: 300 x 300 mm Injection unit:- Maximum injection volume: 180 cm³- Mains supply: 3x 400 V, 50 Hz- Power rating: 11 kW- Control system: MAPLANThe machine is still in production and can be viewedin operation.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
