sottocategorie
(terzo livello di categoria)
Fabbricante:
(Categoria: 502)
AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 80 Tons ca. pressing force, 45 kw drive, complete with oil heating and cooling systems, proportional pressure flow controller, Bale size LxWxH 1.100x720 mm (adjustable length), feeding hopper size : 1.100 x 1.600 mm., Average throughput rate, - with 30 kg/m3 materials 5-7 Ton/h, - with 50 kg/m3 materials 9-11 Ton/h, - with 120 kg/m3 materials 17-19 Ton/h, 5 vertical-wire binding, Cycle with no material, no twisting : 25 ca, Pre-press flap with 2 x 20 Ton force, Exchangeable bottom plate in hardox in channel and chamber, oil tank capacity 950 lt., Machine weight ca.25.000 kg., General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic binding, Fully automatic with adjustable parameters on touch screen ...
AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 100 Tons ca. pressing force, 45 kw drive, complete with oil heating and cooling systems, proportional pressure flow controller, adjustable channel pressure, Bale size LxWxH 1.100x720 mm (adjustable length), Filling hopper size 1.100 x 1.600 mm., Average throughput rate, - with 30 kg/m3 materials 6-8 Ton/h, - with 50 kg/m3 materials 10-12 Ton/h, - with 120 kg/m3 materials 18-20 Ton/h, 5 vertical-wire binding, upper and lower photocells to control material feeding feeding, Cycle with no material, no twisting : 22 ca, Pre-press flap with 2 x 20 Ton force, Exchangeable bottom plate in hardox in channel and chamber, Baler weight ca.27.000 kg., General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic bind ...
AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 120 Tons ca. pressing force, 90 kw drive, complete with oil heating and cooling, proportional pressure flow controller, Filling hopper 1.100 x 1.600 mm., Bale size LxWxH 1.100x720 mm (adjustable length), Average throughput rate, - with 30 kg/m3 materials 6-8 Ton/h, - with 50 kg/m3 materials 11-13 Ton/h, - with 120 kg/m3 materials 19-22 Ton/h, 5 vertical-wire binding, Cycle with no material, no twisting : 21 ca, Pre-press flap with 2 x 26 Ton force, Exchangeable bottom plate in hardox in channel and chamber, Machine weight ca 28.500 kg, oil tank capacity : 1.500 kg, General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic binding, Fully automatic with adjustable parameters on touch screen panel., A M ...
STRAUTMANN BALLE TAINER, Questa particolare pressa verticale è dotata di uno spazio di stoccaggio che permette di produrre balle multiple, in automatico., 60 Ton, Materiali: Carta, cartone, bottiglie in PET, film, Potenza totale installata 11 kw, Potenza motrice 5,5 kw, altezza del punto di ingresso 1.370 mm., larghezza del punto di ingresso 1069 mm, Dimensioni Balke LxPxJ 1,1 x 1,1 x 0,9 mt., 3 lastre, Peso fino a 400 kg. (3 dischi), Attacchi verticali a 4 legami, Costruito nel 2012, Buone condizioni di lavoro, Dimensioni totali: LxPxA 6.355 x 2.056 x 2.756, Peso 7.050 kg ca, Potenza installata - Potenza utilizzata in lavoro: circa 60-65% : 11
l 45 kw POTENZA 680 kg/h (a seconda del materiale/pieno carico) Processo attivo e Koller controllato da computer PP 300 è una linea di pellet composta dalle seguenti macchine: - SISTEMA DI DOSAGGIO con controllo PLC automatico dall'alimentazione del materiale macinato inclusa la valvola rotativa - Mulino a martelli con setaccio 6 mm per materia prima cippato - Mulino a pellet con motore principale 45 kW con sistema automatico di controllo idraulico (Eur.Pat. EP1619012B1). Sistema brevettato. Il processo di pressatura è completamente monitorato da un controller e monitorato tramite telefono cellulare. minisilo per carico con sensore di livello; Sistema di sicurezza per controllare il blocco del Matritze Monitoraggio dell'umidità - Sistema di raffreddamento e depolverazione del pellet prodotto tramite vite
l 90 kw POTENZA 1350 kg/h (a seconda del materiale/pieno carico) Processo attivo e Koller controllato da computer PP 500 è una linea di pellet composta dalle seguenti macchine: - SISTEMA DI DOSAGGIO con controllo automatico PLC dell'alimentazione del materiale macinato inclusa valvola rotativa - Mulino a martelli con setaccio 6 mm per materia prima cippato - Mulino a pellet con motore principale 90 kW con sistema automatico di controllo idraulico (Eur.Pat. EP1619012B1). Sistema brevettato. Il processo di pressatura è completamente monitorato da un controller e monitorato tramite telefono cellulare. minisilo per carico con sensore di livello; Sistema di sicurezza per controllare il blocco del Matritze Monitoraggio dell'umidità - Sistema di raffreddamento e depolverazione del pellet prodotto tramite vite
Technical data baler:Manufacturer BollegraafTyp HBK 100Year of construction 2004Hours of operation 34,480 hoursPress power main press 100 tonsPress power of pre-press max. 42 tonsFeed channel 1,600 x 1,100 mmFilling volume 3.15 m³Theoretic cycle time 22 sec.Theoretic throughput capacity up to 450 m³/hourBale size 1,100 x 720 mm, lenght variableDriving motor 45 kWConnected load 60 kWTying system 5-fold vertical, fully automaticThroughput rate at abulk weight of 30 kg/cbm approx. 13 tons/hourbulk weight of 50 kg/cbm approx. 20 tons/hourbulk weight of 100 kg/cbm approx. 30 tons/hourThroughput rate with ruffler approx. 20 tons/hourBale weight 550 up to 750 kg, depends on materialVolume hydraulic oil tank 750 lSPS controller Telemecanique TSX MicroTransport dimensions only baler 10,900 x 2,320 x 3,300 mm (l x w x h)Machine weight baler approx. 19 tonsComments:Unlike the standard HBC pre ...
Technical data baler:Manufacturer Presona ABType LP 50 EH1Year of construction 2005Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of AprilPressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hourThroughput capacity under operating conditions 260 m³/hourDimensions of feed chute 1,250 x 1,100 mmBale chamber volume 2.2 m³Bale dimensions 1,100 x 720 mm, variable lengthDrive power 22 kWTying 5-fold vertical, fully automaticThroughput rates with abulk density of 30 kg/cbm 6 up to 7 tonnes/hourBulk weight of 50 kg/cbm 7 up to 9 tonnes/hourBulk weight of 100 kg/cbm 11 up to 14 tonnes/hourBale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litresPLC control Telemecanique TSX Micro Schneider Magelis control panelEffective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm ...
Technical data baler:Manufacturer BollegraafType HBC 140Year of construction 2017Working hours 13,284, as of October 2025Press power main press 140 tons (max. 153,5 tons)Press power of pre-press 70 tonsFeed channel 1,600 x 1,100 mm (l x w)Capacity per cycle time 4,34 cbmTheoretic cycle time 16 sec.Bale size 1,100 x 1,100 mm (w x h), length adjustableDriving motor 2 x 75 kWConnected load 209 kWTying system 5-fold vertical, fully automatedThroughput rate at abulk weight of 30 kg/cbm approx. 30 tons/hbulk weight of 50 kg/cbm approx. 46 tons/hbulk weight of 100 kg/cbm approx. 82 tons/hBale weight 850 up to 1.500 kgHydraulicoil 2.600 l Univis N46Baler dimensions with conveyor built up with hopper approx.13,200 x 24,200 x 7,333 mm (l x w x h)Transport dimensions only baler approx.13,200 x 2,884 x 3,539 mm (l x w x h)Machine weight baler approx. 51,810 tonsTechnical data feeding and elevating c ...
For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations.Technical data baler:Manufacturer Bollegraaf Recycling Machinery B.V.Typ HBC 60AYear of construction 2000Hours of operation 32,169 hours, stand November 2024Press power main press 60 tonsPress power of pre-press max. 25 tonsFeed channel 1,320 x 1,100 mmTheoretic cycle time 18 sec.Bale size 1,100 x 720 mm, lenght variableDriving motor 45 kWConnected load 60 kWTying system 5-fold verticalThroughput rate at abulk weight of 30 kg/cbm approx. 5,5 tons/hourbulk weight of 50 kg/cbm approx. 10 tons/hourbulk weight of 100 kg/cbm approx. 16 tons/hourBale weight 400 up to 750 kg, depends on materialSPS controller Telemecanique TSX MicroMachine weight baler approx. 24 tonsScope of delivery:1 piece chain belt conveyor1 Bollegraaf HBC 60A baler with whirling unit1 m ...
Technical data baler:Manufacturer BOAType 2040.S. 4V (6) 71.30Year of manufacture 2002Operating hours approx. 66,568 hours, as of October 2025Effective pump running time 13,614 hours, as of October 2025Number of bales pressed 139,167, as of October 2025Pressing force main press 71 tSpecific pressing pressure 9.0 kg/cm²Operating pressure 280 barDimensions of feed chute 1,620 x 1,080 mmBale dimensions 1,100 x 1,100 mm, length variably adjustable 800 up to 1,600 mmDrive power 45 kWTying system 4-fold vertical, fully automaticThroughput rates for quality:Bulk density 20?30 kg/m³, throughput capacity up to 9 tonnes/hourBulk density 40?60 kg/m³, throughput capacity up to 16 t/hourBulk density 80?100 kg/m³, throughput capacity up to 21 t/hourBulk density 100?150 kg/m³, throughput capacity up to 28 t/hourBale weight up to 600 kg/bale, depending on materialHydraulic oil tank capacity 800 lTr ...
Technical data baler:Manufacturer MACPRESSE EUROPA S.R.L.Typ 112Year of construction 2002, partially refurbished in December 2025Operating hours 44,590 hours, stand December 2025Press power main press 200 tonsSpecific press capacity 16,5 kg/cm²Feed channel 2,000 x 1,020 mmFilling volume 2,65 cm³Theoretic throughput rate 795 m³/hBale size 1,100 x 1,100 mm, length variableDriving motor 2 x 75 kWTying system 5-fold horizontal, full automaticThroughput rate at MSW approx. 48 up to 54 tons/h, depends on materialVolume hydraulic oil tank 3,100 lMachine weight baler approx. 50,8 tonsScope of delifery:1 piece baler MACPRESSE, type 111A1 operating manual with CE declaration, electrical and hydraulic circuit diagramComments:The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced:? Hydraulic oil tank emptied and cleaned? Oil and ai ...
Technical data baler:Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50)Year of manufacture 2007Operating hours 13,209 hours, as of MarchNumber of bales pressed: 23,379 balesPressing force 50 tonnesSpecific pressing force 650 kN/m²Feed chute dimensions 1250 x 1050 mm (L x W)Filling volume 0.96 cm³Theoretical cycle time 32 secondsTheoretical throughput capacity 108 m³/hourBale dimensions 1100 x 700 mm (w x h) length variableDrive power 15 kWPower consumption, total in 50 ATying 4-fold vertical, fully automaticThroughput rates with abulk density of 30 kg/cbm approx. 3.1 t/hourBulk weight of 60 kg/cbm approx. 4.5 tonnes/hourBulk weight of 100 kg/cbm approx. 7.2 tonnes/hourBale weights with a bale length of approx. 1.2 m up to 500 kg, depending on materialHydraulic oil tank capacity 400 litresPLC control ...
Technical information baler:Manufacturer HSM GmbH + Co. KGTyp VK 4812 Year of construction 2014Hours of operation 5,612 hours, stand August 2025Press power main press 48 tonsSpecific press capacity 58,2 N/cm²Feed channel 1,250 x 1,020 mmTheoretic cycle time 11.2 sec.Theoretic throughput rate 332 m³/hourBale size 1,100 x 750 x 600 up to 1,200 mmDriving motor 30 kWConnected load 32 kWRated current 59 ATying system 4-fold horizontal, fully automaticThroughput rate at abulk weight of 20 kg/cbm up to 6 tons/hourbulk weight of 50 kg/cbm up to 13 tons/hourBale weight up to 550 kg, depends on materialSPS controller Siemens SIMATIC S7-200Operating panel Siemens HMI Touch PanelFilling quantity hydraulic oil tank 300 LOil type HVI 46Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h)Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h)Machine weight p ...
For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross bindingTechnical data baler:Manufacturer BollegraafTyp HBC 110 K / 75 kWYear of construction 2007Press power main press 100 tonsPress power of pre-press 50 tonsOperating hours 22,605 hoursFeed channel 1,600 x 1,100 mmCapacity per cycle time 3,15 m³Theoretic cycle time 19 sec.Bale size 1,100 x 1,100 mmDriving motor 75 kWConnected load 126 kWFull load current 238 ATying system 5-fold vertical, 5-fold horizontal, fully automatedThroughput rate at abulk weight of 30 kg/cbm approx.16 tons/hbulk weight of 50 kg/cbm approx. 25 tons/hbulk weight of 100 kg/cbm approx. 47 tons/hBale weight up to 1400 kg, depends on material and bale lenghtVolume oil tank approx. 1,300 lSPS controller Telemecanique TSX MicroOperating panel Schneider MAGELIS TouchBaler dimensions built up ...
Technical data baler:Manufacturer Presona ABTyp LP 80 VHK 1Year of construction 2012Total machine operating hours 25,895 hours, as of July 2025Pump operating hours, effective 14,135 hours, as of July 2025Number of bales pressed 235,597 pieces, as of July 2025Press power main press 78,5 tonsSpecific press capacity 95 N/cm² Press power of pre-press 28 tonsVolume of pressing chamber 2,7 m³Feed channel1,500 x 1,100 mmTheoretic throughput rate 930 m³/hThroughput rate under operating conditions 410 m³/hBale size 750 x 1,100 mmDriving motor 55 kWTying system 5 fold vertical, 3-fold horizontal, full automaticThroughput rate with a bulk density of30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material100 kg/m³ approx. 16 to 25 tonnes/hour, depending on materialThroughput capacity with MSW (Municipal Solid Waste) approx. 20 ...
Technical data baler:Manufacturer Presona AB, SwedenType LP 60 VH1Year of construction 2015Total operating hours, 30,143 hours, as of July 2025Effective pump running time onl 6,527 hours, as of July 2025Number of pressed bales 115,193 bales, as of July 2025Press force pre press 25 tMain press force 60 tonnesSpecific pressing force 73N/cm²Dimensions of feed chute 1,500 x 1,100 mmFilling volume / pressing cycle 2.7 m³Theoretical throughput capacity 800 m³/hourThroughput capacity under operating conditions 350 m³/hourBale dimensions 1,100 x 750 mmDrive power 37 kWTying 5-fold vertical, fully automaticThroughput capacity with aBulk weight of 50 kg/cbm 11 to 14 tonnes/hourBale weights 420 to 570 kg, depending on materialHydraulic oil tank volume 600 litresBaler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h)Transport dimensions excluding press 10,100 x 2,400 x 3,00 ...
For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with whirlulator, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire.Technical data baler:Manufacturer MACPRESSE EUROPA S.R.L.Typ 111AYear of construction 1996, refurbished in 10/2024Press power main press 170 tonsSpecific press capacity 14 kg/cm²Feed channel 1,800 x 1,020 mmFilling volume 2,5 cm³Theoretic throughput rate 750 m³/hBale size 1,100 x 1,100 mm, length variableDriving motor 2 x 55 kWTying system 5-fold horizontal, full automaticThroughput rate at a approx. 30 up to 35 tons/h, depends on materialVolume hydraulic oil tank 3,000 lTransport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h)Machine weight baler approx. 40 tonsComments:The baler was ...
Technical data packing press / can press / metal sheet press:Manufacturer unoTech GmbHType UPAXX 70Year of manufacture 2019Operating hours approx. 3,000 hoursPressing force 700 kN at 315 barFilling opening chute 420 x 1,250 mm (d x w)Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on materialDrive power 30 kWConnected load 40 kWPower consumption, total 70 AThroughput capacity for empty beverage cans with:one pressing stroke approx. 1.7 t/hourtwo pressing strokes approx. 2.5 t/hourAchieved compaction approx. 1200 kg/m³Hydraulic oil tank capacity 850 lPress dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h)Transport weight press approx. 9.5 tAccessories:Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355Material properties:According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet off ...
Technical data baler:Manufacturer BOA Recycling Systems B.V.Type M75-45-A-5-1.6 EcolineYear of construction 2021Hours of operation 2,658 hours (as of May 2024)Number of pressed bales 42,212 pieces (as of May 2024)Press power main press 71,2 kN (71 t)Specific press capacity 9 kg/cm²Operating pressure 280 barCylinder stroke 2,200 mmFeed channel 1,620 x 1,000 mmCapacity per cycle time 2,4 m³Theoretic cycle time 21 secondsTheoretic throughput rate 450 m³/hourBale size 1,100 x 720 mm, length variably adjustable up to 1,400 mmDriving motor 45 kWConnected load 100 kWCurrent consumption 200 ATying system 5-fold vertical, fully automatic, the press stamp is prepared for an additional 3-fold horizontal bindingThroughput rate at abulk weight of 30 kg/cbm approx. 13,6 tons/hourbulk weight of 50 kg/cbm approx. 24,2 tons/hourbulk weight of 100 kg/cbm approx. 36,4 tons/hourbulk weight of 150 kg/cb ...
Technical data baler:Manufacturer Presto GmbH & Co. KGTyp CC 36 MYear of construction 2010Hours of operation 3,641 hPress power main press 36 tSpecific press capacity 467 N/cm²Feed channel 1.080 x 1100 mm (l x w)Cycle time 34 sec.Capacity per cycle time 0,85 m³Theoretic throughput rate 90 m³/hThroughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hourBale size 1100 x 750 mm (w x h), length variableDriving motor 15 kWTying 4-fold vertical, semi-automatic, with polyester synthetic yarnThroughput rate at abulk weight of 35 kg/cbm 1,8 to/hbulk weight of 60 kg/cbm 2,5 to/hbulk weight of 100 kg/cbm 3,1 to/hTransport dimensions only baler 4.200 x 1.640 x 2.200 mmMachine weight baler approx. 4 toComments:The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating ...
2014 Pressa di disidratazione conica S15-E-EVA-7,5 modello per uso alimentare. Completamente rivisto. Storia e documentazione disponibili. Potenza del motore: 7,5kW.
Questa macchina da stampa di Collin presso Plastima Used Machinery in machine storage. La macchina è del 2001 ed è in buone condizioni. – Marchio: Collin Pilot & Lab Solutions – Modello: P200P – Anno di costruzione: 2001 – Dimensioni piastra: 200 x 200 mm – Max. forza di pressatura: 196 kN
Dati tecnici Pressione massima: 9 tonnellate Anno di realizzazione: 2010 Sezione trasversale del canale: 500 x 500 mm Dimensioni del portellone: 400 x 450 mm Collegamento di alimentazione: 400 V/ 50 Hz La macchina è pienamente funzionante dopo la supervisione tecnica. Sentiti libero di contattarci! La macchina è pienamente funzionante dopo la supervisione tecnica.
Dati tecnici Pressione massima: 26 tonnellate Connessione alimentazione: 400 V/ 4,6 kW Forza stampa: 2,7 kg/cm² Anno di realizzazione: 2016 Dimensione della balla: 1200x800x1150 mm Peso della balla: circa 400-450 kg Prezzo: su richiesta La macchina è completamente funzionante, dopo supervisione tecnica e ristrutturazione.
Dati tecnici Pressione massima: 24 tonnellate Collegamento elettrico: 400V / 4kW Forza di stampa: 2,5 kg/cm² Anno di realizzazione: 2012 Dimensione della balla: 1200x800x1000 mm Prezzo: su richiesta Peso della balla: circa 400 kg La macchina è pienamente funzionante dopo la supervisione tecnica. C'è la possibilità di ordinare la macchina con la ristrutturazione della vernice. Per maggiori informazioni, vi preghiamo di contattarci via email o telefono!
Dati tecnici: Pressione massima: 60 tonnellate Anno di realizzazione: 1999 Forza stampa: 72,7 t/cm² Numero di rilegature: 4 verticali Sezione trasversale del canale: 750 x 1100 mm Dimensioni del portellone: 1020 x 1400 mm Peso della balla: 450-650 kg Peso: circa 20 tonnellate Connessione di alimentazione: 400 V/ 45 kW Fasciatura balle: automatica Volume massimo di riempimento: 1,85 m3 Capacità di riposo: massimo 650 m³ / ora Capacità sotto carico: massimo 280 m³ / ora Prestazioni teoriche: 9,5 tonnellate/ora (capacità teorica di 35 kg/m³) 16,5 tonnellate/ora (capacità teorica di 60 kg/m³) 26 tonnellate/ora (capacità teorica di 100 kg/m³) Breve descrizione delle funzioni: - Tramoggia di alimentazione aperta per il riempimento con un nastro trasportatore. - Coltelli sulla piastra di pressa e sul telaio della pressa per tagliare la materia prima in ...
Indicazioni: Pressione massima: 18 tonnellate Connessione alimentazione: 400 V/ 4 kW Forza di pressione: 2,34 kg/cm² Anno di produzione: 2009-2013 Dimensione della balla: 1100x700x700 mm Prezzo: su richiesta La macchina è completamente funzionante dopo la supervisione tecnica e la ristrutturazione della vernice.
Indicazioni: Pressione massima: 53,2 tonnellate Collegamento elettrico: 400V / 7,5 kW Forza di stampa: 5,68 kg/cm² Anno di realizzazione: 2013 Dimensione della balla: 1200x780x1200 mm Produttività: circa 2 balle/ora Peso della balla: circa 500 kg Prezzo: su richiesta La macchina è pienamente funzionante dopo la supervisione tecnica. Abbiamo diverse pressature a canale e imballatrici nel nostro stock e vi invitiamo sinceramente a contattarci!
Indicazioni: Pressione massima: 40 tonnellate Anno di realizzazione: 2007 Forza di pressione: 63 tonnellate/m² Serbatoio dell'olio: 600l Peso della balla: 300-400 kg Peso: circa 7,6 tonnellate Collegamento elettrico: 400 V/ 15 kW Fasciatura balle: automatica La tramoggia aperta permette di riempirlo con il nastro trasportatore. Regolazione automatica della luce dal canale. Rilegatura automatica con filo Scelta della lunghezza della balla finita La piastra di pressa guida in modo stabile sui grandi rulli
GERMANPLAST SRL
