Modello
(Fabbricante: DESMA)
Macchine per lo stampaggio a iniezione verticale Desma Modello D968 250 ZO (S3) Volume di corsa 2000 cm3 Pressione di iniezione 1670 bar Platino 560 mm x 630 mm Luce diurna estesa 860 mm Espulsori idraulici superiore e inferiore corsa di 400 mm Controllo dell'aspirazione delle strisce Con pompa a vuoto Anni: 2014 / 2015
clamping force: 2.700 kN injection volume: 6.000 cm³ screw diameter: -- mm platen size: 560 x 630 mm Condition: second-hand, Specification: rubber injection moulding machine - second-hand, partially dismantled, but would be restored to its previous condition EUROMAP size 2500 – 7000 Clamping unit: - Clamping unit: vertical - Clamping force: 2.700 kN - Platen size: 560 x 630 mm - Max. stroke: 550 mm (see data sheet) Injection unit: - Max. injection volume: 6,000 cm³ - Injection pressure: 2150 bar - Power supply: 3x 400 V, 50 Hz, N, PE - Motor power: 28,2 kW - Installed heating capacity: 49,9 kW - Weight: Clamping unit approx.: 6,040 kg Injection unit approx.: 2,700 kg Hydraulic unit with oil and control cabinet 1,860 kg Total weight approx.: 10.600 kg - For dime ...
clamping force: 4.500 kN injection volume: 3.300 cm³ screw diameter: -- mm platen size: 670 x 780 mm Condition: second-hand, Specification: rubber injection moulding machine - second-hand EUROMAP size 4000 – 7000 Clamping unit: - Clamping unit: vertical - Clamping force: 4500 kN - Platen size: 670 x 780 mm - Max. stroke: 600 mm (see data sheet) Injection unit: - Max. injection volume: 3,300 cm³ - Injection pressure: 2150 bar - Power supply: 3x 400 V, 50 Hz, N - Motor power: 35,5 kW - Installed heating capacity: 73,9 kW - Weight: Clamping unit approx.: 8,400 kg Injection unit approx.: 2,700 kg Hydraulic unit with oil and control cabinet 2,200 kg Additional equipment (approx.): 3,000 kg Total weight approx.: 16.300 kg - For dimensions, see the installation data in the appe ...
clamping force: 4.500 kN injection volume: 5.600 cm³ screw diameter: 610 - 985 mm platen size: 670 x 780 mm Condition: second-hand, Specification: rubber injection moulding machine - second-hand EUROMAP size 4500 – 12300 Clamping unit: - Clamping unit: vertical - Clamping force: 4500 kN - Platen size: 670 x 780 mm - Max. stroke: 610 - 985 mm (see data sheet) Injection unit: - Injection unit type: ADV - Max. injection volume: 5,600 cm³ - Injection pressure: 2200 bar - Power supply: 3x 400 V, 50 Hz, N, PE - Pump capacity: 27 kW - Weight: Cutting unit approx.: 10,200 kg Injection unit approx.: 3,500 kg Hydraulic unit with oil: 2,600 kg Accessories approx.: 4,700 kg Total weight approx.: 21,000 kg - For dimensions, see the installation data in the appendix The data for this ad w ...
clamping force: 4.500 kN injection volume: 5.000 cm³ screw diameter: -- mm platen size: 670 x 780 mm Condition: second-hand, Specification: rubber injection moulding machine - second-hand EUROMAP size 4500 – 10000 Clamping unit: - Clamping unit: vertical - Clamping force: 4500 kN - Platen size: 670 x 780 mm - Max. stroke: 600 mm (see data sheet) Injection unit: - Max. injection volume: 5,000 cm³ - Injection pressure: 2060 bar - Power supply: 3x 400 V, 50 Hz, N, PE - Motor power: 38 kW - Installed heating capacity: 67.5 kW - Weight: Clamping unit approx.: 8,900 kg Injection unit approx.: 3,200 kg Hydraulic unit with oil and control cabinet 2,350 kg - For dimensions, see the installation data in the appendix There are 6 machines available, manufactured between 2001 and 2004. The data ...
Key data: 2700 kN, 29 g/PS
Offriamo questa macchina per la lavorazione della gomma DESMA D 969.250 Z (S3) in condizioni impeccabili, costruita nel 2021. Forza di serraggio: 2700 kN Volume di iniezione: 500 cm³ Pressione di iniezione: 3500 bar Dimensione EUROMAP: 2700-1750 Tensione: 400 V Frequenza: 50 Hz Corrente in cortocircuito massima: 10 kA Corrente totale: 138 A Pre-fusibile: 160 A Pressione della pompa: 265 bar Capacità di azionamento della pompa: 72/39 l/min Consumo di corrente dell'azionamento della pompa: 32,0 A Potenza di azionamento della pompa: 22 kW Forza di applicazione dell'ugello: 58 kN Peso: 10,7 t Portata d'aria compressa: 0,5 m³/h Pressione dell'aria compressa: 6 bar Portata di volume d'acqua di raffreddamento: 1,6 m³/h Temperatura massima dell'acqua di raffreddamento: 20 °C Ore del motore idraulico: 7:30 ore, pompa idraulica (forza di serraggio): 65 Orari, Sistema ...
