estrusori usati in vendita

Key data: 30 mm, 28 , 110 U/min

Linea di filamenti usati Estrusore monovite 30mm 28L/D Bagnomaria da 2 metri Grilletto AB50 Avvolgitore W250 Macchine di PMH GmbH

Key data: 35 mm, 25 , 107 U/min

estrusore monovite REIFHÄUSER usato Con dimensione della vite: diametro 35mm / 25 LD L'estrusore è in ottime condizioni Tipo RT 78-1-35-25 Nuovo quadro elettrico con nuovo motore AC -7,5kW Anno di costruzione 1994 Rapidamente disponibile

Key data: 50 mm, 30

Estrusore usato in buone condizioni Con dimensioni della vite: diametro 50 mm x 30V zona di aspirazione e degasaggio scanalata Tipo RH 241-1-50-30V con azionamento DC 30,2 kW Costruito nel 1993 Disponibilità immediata senza quadro elettrico Con quadro elettrico Tempi di consegna di 4-6 settimane

Includes (1) Single Screw Extruder PME60/35, screw diameter: 60mm, screw length: 35D with degassing vacuum pump, barrel heating zones: 7x 20kW, throughput: 60-180kg/h, power: 70kW, with integrated electrical control cabinet with temperature controllers and all connections, continuously operating screen changer type L-026 with two channels, granulating nozzle for 20 strands, stainless steel water bath with deflection rollers and cooling fan, dosing unit with hopper, (2) Double Screen 800/300 stainless steel with double screen chute, round perforation 8mm for downstream connection of a transport suction unit, monitor control, strand pelletiser GR 250, infinitely variable collection heating, single knife, inclined cut, pneumatically pressed feed roller, outlet with slide (3) Dry Air Dryer E200 with one fully insulated 1000l V2A vessel, drying throughput: 250kg/h, stationary unit, easy clean ...

Was used for PVC, PUR and TPEV, with control cabinet, used screws and one used cylinder, with documentation, was maintained regularly.

A single-screw extruder IDE with degassing is available. Extrusion height: approx. 1250mm, connected load: 88kW, screw diameter: 60mm, screw length (33D): 1980mm, number of degassing zones: 6, application: PMMA and PC profiles and pipes, operating hours: 17845h. Without melting pump, including SMP interface. Documentation available. On-site inspection is possible.

A single-screw extruder IDE is available. Extrusion height: approx. 1250mm, connected load: 25kW, screw diameter: 38mm, screw length (25D): 950mm, number of degassing zones: 3, application: PMMA and PC profiles, operating hours: 8203h. Documentation available. On-site inspection is possible.

A Pagani single-screw extruder including degassing is available. Extrusion height: approx. 1250mm, screw diameter: 60mm, screw length (33D): 1980mm, number of degassing screw zones: 5, application: PMMA profiles and pipes, operating hours: approx. 20000h. On-site inspection is possible.

PET films were produced on the extruder, working width: 650-800mm, output: 600-700kg/h, with cooling spirals, new extruder screw, degassing system, other spare parts and documentation, without dosing system, an on-site inspection is possible.

Screw diameter: 53mm, screw speed: 345rpm, heating type: electric. Including cooling and 2 pairs of screws.

Screw diameter: 58mm, power: 30.6kW, screw speed: 280rpm, conveying capacity: approx. 120kg/h, dimensions X/Y/Z: approx. 2500mm/1500mm/1500mm. Including 2x pairs of screws and a new Brabender FW 80 metering machine.

Motor power: 80kW, insertion diameter: 70mm, screw diameter: 70mm, speed: 300rpm, heating zones: 3(7kW/7kW/5kW), dimensions X/Y: approx. 5000mm/900mm, weight: approx. 5700kg. Including 2 pairs of screws, cooling roller mill MPM, year of construction: 2020.

One extruder line is available. Throughput: 350kg/h, raw materials: PP/LDPE/HDPE/EVA, dosing: PlastControl 1HK/3NK, melt filter: available, film type: flat film laminated film, working width: 2300mm, calender: pressure roller/chillroll, line speed range: 15m-60m/min, max. line speed: 100m/min, printing unit: EKS-Kabey incl. dryer, printing unit width: 2100mm, panel cut: 2x Slitec, rewinder: turret, max. line speed: 100m/min. Line speed range: 15m-60m/min, max. line speed: 100m/min, printing unit: EKS-Kabey including dryer, printing unit width: 2100mm, panel cut: 2x Slitec, rewinder: turret winder, turret winder diameter: 1200mm. Wide slot die extruder: 5x Reifenhäuser and 2x Verbruggen NV. Documentation available. On-site inspection is possible.

A Reifenhäuser extruder line is available. Throughput: 350kg/h, raw materials: PP/LDPE/HDPE/EVA, dosing: PlastControl 1HK/3NK, melt filter: available, film type: flat film - laminated film, working width: 2300mm, calender: pressure roller/chillroll, line speed range: 15m-60m/min, max. line speed: 100m/min, printing unit: 2x EKS-Kabey, printing unit width: 400mm, panel cut: 4x Slitec, rewinder: turret, max. line speed: 100m/min. line speed: 100m/min, printing unit: 2x EKS-Kabey, printing unit width: 400mm, rewinder: turret winder, turret winder diameter: 1200mm, unwinder diameter: 1000mm, web storage length: approx. 5m. Wide slot die extruder: 9x Reifenhäuser. Equipment: 1x spray gluing bar and 2x gluing application with cover liner. Documentation available. On-site inspection is possible.

A Reifenhäuser extruder line is available. Throughput: 350kg/h, raw materials: PP/LDPE/HDPE/EVA, dosing: PlastControl 1HK/3NK, melt filter: available, film type: flat film - laminated film, working width: 2300mm, calender: pressure roller/chillroll, line speed range: 15m-60m/min, max. line speed: 100m/min, printing unit: 2x EKS-Kabey, printing unit width: 400mm, panel cut: 4x Slitec, rewinder: turret, max. line speed: 100m/min. Line speed range: 15m-60m/min, max. line speed: 100m/min, printing unit: 2x EKS-Kabey, printing unit width: 400mm, panel cut: 4x Slitec, rewinder: turret winder, turret winder diameter: 1200mm, unwinder diameter: 1200mm. Wide slot die extruder: 3x Reifenhäuser. Documentation available. On-site inspection is possible.

A Kuhne extruder line is available. Throughput: 350kg/h, raw materials: PP/LDPE/HDPE/EVA, dosing: PlastControl 1HK/3NK, melt filter: Ettlinger, film type: flat film laminated film, working width: 2300mm, calender: pressure roller/chillroll, line speed range: 15m-70m/min, max. line speed: 100m/min, rewinder: turret winder, turret winder diameter: 1200mm, unwinder diameter: 1000mm, wide slit line speed: 100m/min, rewinder: turret winder, turret winder diameter: 1200mm, unwinder diameter: 1000mm, wide slot die extruder: 2x ribbing NV. Equipment: suitable for processing regrind. Documentation available. On-site inspection is possible.

A Kuhne extruder line is available. Throughput: 350kg/h, raw materials: PP/LDPE/HDPE/EVA, dosing: PlastControl 1HK/3NK, melt filter: available, film type: flat film - laminated film, working width: 2300mm, calender: pressure roller/chill roll, line speed range: 15m-70m/min, max. line speed: 100m/min, printing unit: 2x EKS-Kabey, printing unit width: 400mm, rewinder: turret winder, turret winder diameter: 400mm, line speed range: 15m-70m/min, max. line speed: 100m/min, printing unit: 2x EKS-Kabey, printing unit width: 400mm, rewinder: turret winder, turret winder diameter: 1200mm, unwinder diameter: 1000mm, web storage length: approx. 5m. Wide slot die extruder: 9x tire houses. Equipment: 1x spray gluing bar and 2x gluing application with cover liner. Documentation available. On-site inspection is possible.

Composto da: A. Estrusore bivite, marca Bausano, modello: 88MD2/66/19VK - Funi: 66mm Ø 19 L/D - Due motori da 10 CV (7,3 kW) ciascuno - Distributore di materiale - Degasatore con pompa a vuoto B. Tabella calibri, marca Bausano - Lunghezza: 2,5 m C. Carro traino, marca Bausano - Dimensioni: 2 m x 0,20 m di larghezza D. Sierra, marchio Bausano - Con disco da taglio Ø 350 mm E. Turner, marchio Bausano di 4m

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAM COEXTRUSION LINE now used for BIO PLASTICS, 3 extruders with screw diam. 63,5 mm., K Design thickness control, Inserts for working high neck (HDPE) and low neck (BIO), n. 3 x extruders 63,5 mm., n.4 Doteco components for each extruder, rotating pull off unit, still die , just cleaned, mm. 250, gap 1,8 mm., 1.650 mm wide pull off unit, Single winder 1.750 mm., ABF Duo EUROCHILLER for air ring and IBC cooling, EUROCHILLER ADIABATIC condensing battery ABF, Construction year 2009, available connected until March 25.

TECNOVA EXTRUSION LINE 130 mm. (5.11)500 kg/h (1,100 lbs/h), PE PP PC PS ABS PET PA, Including:, Scrap silo, Extraction auger, Extruder with 130 mm (5.11) screw diam.37 L/D, N. 1 vacuum degassing pump, 225 kw a.c. drive, Total installed power 425 kw, used in work 250 kw ca., Semi-automatic non stop screen-changer with screens diam.250 mm., Water ring pelletizer, Drying centrifuge, Offered AS IS, WHERE IS or reconditioned, price options: as is, checked, lightly reconditioned, totally reconditioned

GAMMA MECCANICA TRIMCO 50, specific for regranulating clean production scraps with compactor, suggested max water content : 4% for best results, Throughput rate : max.80 kg/h depending on feeding rate and material, conveyor belt with metal detector, reel feeding possible through pulling unit on top of the 500 mm Ø compactor, extruder with 50 mm screw, no degassing, 75 mm. Ø screenchanger, stainless steel water ring pelletizer type TDA2 with spinner, cooling system, filtering system,, constructed in 2018, prepared for Industry 4.0, with remote connection to check on performances and diagnosis, PLC to manage all safety devices, immediately available as is in next-to-new conditions

AMUT TWIN SCREW EXTRUDER BA86, n.2 x 86 mm diam. counter-rotating screws (24 L/D with 4.440 worked hours), Siemens d.c. 31 kw drive, N.1 vacuum degassing pump 1,5 kw, Throughput rate up to 180 kg/h with PVC, N.6 heating areas, N.4 cooling areas, Manuals, CE, drawings available, The machine is offered reconditioned, Possible addition of, - BANDERA cutting unit RCB/1V y.1997, - cooling system, on separate offer

GAMMA MECCANICA TRIMCO 50, Compact type extrusion line, Throughput rate : max.100-110 kg/h (increased power, compactor, extruder with 50 mm screw, 136 kw installed power, screenchanger, water ring pelletizer, constructed in 2009, available with reconditioning, reel feeder on request

PREALPINA EXTRUDER, For PE PP ABS PS PC PS, Average throughput rate 450-600 kg/h depending on material and feeding rate, 280 kw. a.c. drive, Electric cabinet with touch screen panel, Scrap silo available on request, if needed, with extraction screw, crammed feeding unit, Barrel with screw diam.130 mm.35 L/D, N.1 vacuum degassing pump, non-stop screen changer available with FULLY AUTOMATIC SCREENCHANGER on request, Water ring pelletizer, Centrifugal dryer, vibro classifier, On separate offer: vertical mixers for scraps and granulate,etc., running and connected, Available 02.25

CMD PREALPINA EXTRUSION LINE for PE PP PS PC ABS, 130 mm screw - 500-600 kg/h, including:, scrap silo, feeding auger, crammed feeder, extruder with 130 mm screw 35 L/D (new 2019), MISSING OF screenchanger (can be supplied separately), control panel, water ring pelletizer, Electric cabinet for complete management of the line, The line can be partially or totally reconditioned with addition of screenchanger, new screw+barrel+feeding piece, pelletizer, etc. on sepate request

PREALPINA EXTRUDER AS NEW, For PE PP ABS PS PC PS, Average throughput rate 450-600 kg/h depending on material and feeding rate, 280 kw. a.c. drive, Electric cabinet with touch screen panel, Scrap silo available on request, if needed, with extraction screw, crammed feeding unit, Barrel with screw diam.130 mm.35 L/D, N.1 vacuum degassing pump, Semi-automatic screen changer available with FULLY AUTOMATIC SCREENCHANGER on request, Water ring pelletizer, Centrifugal dryer, On separate offer: cyclon, vibro-classifier-vertical mixers for scraps and granulate,etc., Immediately available

EXTRUSION LINE PREALPINA CDM, throughput rate 500-700 kg, Installed power 435 kw (about 280 kw used in work), crammed feeding unit, Barrel with 130 mm screw Ø 35 L/D, screw geometry for LDPE LLDPE HDPE PC PS ABS, N.1 vacuum degassing pump, FIMIC RAS 400 fully automatic screenchanger y.2020, water ring pelletizer, drying centrifuge, vibro classifier, Bought in 2020, Still connected and working with PE., Ready-to-go, ---------------------------------------------------------------------- ----, (Possible addition of complete Mcguire feeding structure n.4 gravimetrical dosing units - new 2020 - original cost 100K€, bid your price if you need it), THROUGHPUT RATE: 500-700 kg/h, MATERIALS: PE PP PC PS ABS, INSTALLED POWER: 435 KW, AVAILABILITY: immediate

Description Regranulation Line Single screw extruder diameter 130 L/D 37 nr.1 vent Motor 200 kW A.C Hydraulic Screen Changer diameter 220 Silos for foil feeding Water ring pelletizer Twin Centrifuge Granulator Engine Plast BA 1000.550.3 KW 75