Macchine per il taglio della gomma

Key data: 1550 mm, 100 mm, 3050 mm

Plotter da taglio da tavolo con le seguenti attrezzature: - 2 assi Z per 2 utensili (uno per i coltelli e uno per il motore di fresatura, attualmente non è installato alcun motore di fresatura ma solo coltelli) - lama oscillante, azionata pneumaticamente - Tavolo aspirante con controllo automatico del campo - 2 pompe per vuoto regolabili - Tutti gli assi con servoazionamento - Modulo software di auto-nesting - Modulo software di layout interattivo per il posizionamento manuale dei contorni da tagliare - 3 teste per lame di spessore: 1 lama da 0,64 mm, 1 lama da 1,0 mm, 1 lama da 1,5 mm

cross-section width:: -- mmcross-section heigth:: -- mmfeed:: -- mmspeed of feed:: 0,4 - 20 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Granulatore Blackfriars Dimensioni della gola di alimentazione: 400mm di larghezza x 660mm di altezza Tipo di modello: 4040 Velocità 500 giri/min Precedentemente utilizzato su PU

cross-section width:: 700 mmcross-section heigth:: 500 mmfeed:: -- mmCondition: used, overhauledSpecification: splitter for rubber bales - overhauled with CE- cross section width max.ca.: 700 mm- cross section height max. approx.: 500 mm- cutting force approx.: 10 tons - AC motor: 4 kW, 400 V, 50 Hz- Infeed roller conveyor for product transport- Machine stands on a raised pedestal- Two-hand safety control for driving the blade movement- Safety guard according to current standards- New control cabinet- New on-board system machine- Operating and maintenance manual in English- CE marking- Paintwork: according to customer requirements- Refurbished with 1 year warranty- CE marking,Option:- Output roller conveyor newThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

USI Cumberland Grinder / Granulatore 28x20 50 CV Griglia 8mm 2 nuove lame morte 3 lame da mosca affilate Una nuova casella di controllo start / stop

Fogg & Young Bale Cutter

cross-section width:: 100 mmcross-section heigth:: 50 mmfeed:: 10 - 999.999,9 mmspeed of feed:: 1 - 50 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refer to code 1049 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

cross-section width:: 5 Schläuche 3-5 mmcross-section heigth:: 3 - 20 mmfeed:: 1,5 - 50 mmCondition: used, very good condition only approx. 1 year in productionSpecification: circular knife cutting machine for slices and rings- small cutting machine with high-speed rotating circular knife- feed and knife movement, pneumatic- Tube or strand diameter min.: 3 mm- Tube or strand diameter min.: 20 mm- Feed (ring or strand length): 1.5 - 50 mm- Output depending on material max.: 60 strokes/min- Optionally, the following can be cut 5 tubes or strands: diameter 3 mm to 5 mm 4 tubes or strands: diameter 5 mm to 7 mm 3 hoses or strands: diameter 7 mm to 12 mm 2 hoses or strands: diameter 12 mm to 15 mm 1 hose or string: diameter 15 mm to 20 mm- Power requir ...

cross-section width:: 40 (45) mmcross-section heigth:: 25 mmfeed:: 1 - 999.999,9 mmspeed of feed:: 1 - 60 m/mincuts max.:: 100 Schnitte/mCondition: used,Specification: circular knife cutting machine - second-hand for cutting rings, discs and profiles- diameter max.: 45 mm- 3 hoses or strands: 6 - 20 mm- 2 hoses or strands: 20 - 30 mm- 1 hose or string: 30 - 45 mm- cross section width max.: 40 mm- cross-section height max.: 25 mm- feed speed: 1 - 60 m/min, infinitely variable- Cutting capacity max.: 100 cuts/min depending on material and cutting length- Cutting length: 1 - 999.999,9 mm- Step jump: 0.1 mm- Feed by servo drive- Cutting by servo drive- Pulsed feed- Connected load approx.: 5 kW- Operating voltage: 3 x 400V, 50Hz, PE- Weight approx.:  ...

cross-section width:: -- mmcross-section heigth:: -- mmfeed:: -- mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cross-section width:: 100 mmcross-section heigth:: 40 mmfeed:: 2 - 999.999,9 mmCondition: new,Specification: Impact knife cutting machine CC-600/40 for hoses and profiles- contact length: 600 mm- product diameter: 40 mm- belt width: 100 mm- Tractive force: 400 N to 800 N- Drive: 2 drives upper and lower belt- Conveyor belt speed: 100 m/min- Drive feed, cutting motor: Servo drives- Cutting capacity with blade max.: 4,000 1/min- Connected load: 3.5 kW- Dimensions L/H/B: 1,900 x 1,650 x 960 mm- Weight approx.: 580 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cross-section width:: 85 mmcross-section heigth:: 25 - 40 mmfeed:: 1 - 999,999,9 mmspeed of feed:: 60 m/mincuts max.:: 100 - 120 Schnitte/mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Merkle Slitter largo 500mm

cross-section width:: Schläuche max. 11 mmcross-section heigth:: 11 mmfeed:: 0,5 - 100.000 mmCondition: used, very good conditionSpecification: universal cutting machine with roller drive for hoses - small cutting machine for hoses- feed unit: roller drive- microcontroller control: 80537- cutting unit: pneumatic- Type of cut: Blade cut- Industrial blade: for PVC hoses- Max. hose diameter: 11 mm- Maintenance unit: yes- Max. feed speed: 1 - 50 m/min - Cutting capacity max.: 450 cuts/min depending on the cutting length- Cutting force approx.: 500 N at 6 bar- Cutting length: 0.5 - 100,000 mm- Resolution/step change: 0.5 mm- Operating voltage: 230V, 50-60 Hz- Compressed air: 5 - 6 bar- Air consumption per stroke approx.: 0. ...

volt: 380 Vpeso: 1,4 t:

cross-section width:: 800 mmcross-section heigth:: 15 mmfeed:: ab ca. 5 mmspeed of feed:: m/mincuts max.:: Schnitte/mcondition: used, overhauledSpecification: Panel cutting machine - overhauled with CE- Section width max.approx.: 800 mm- Section height max.: 15 mm, depending on the hardness of the rubber sheets- Cutting length from approx.: 5 mm (depending on material)- cutting force approx.: 10 tons - Connected load approx.: 1.8 kW- Painting: green- Operating voltage: 3 x 400V, 50Hz, N, PE- Dimensions approx.: 1,200 x 1,450 x 1,950 mm - Safety devices according to current standards,- New on-board system machine,- New control cabinet with PLC system Siemens S7-1200,- CE marking,- Instructions for use and maintenance in English or German language ...

Taglierina di balle La lama di ghigliottina è larga circa 35 pollici

Macchina Z-Splicing Marca: Z-AUTOMATION Modello: Z splicing stand alone Anno 2014 8 kW, 6 bar Profili Sezioni trasversali 50 x 40 mm 2 - 4 cavità di giunzione Lunghezza 4600 mm Controllo touch screen Siemens Simatic HMI Controllo a pedale Interruttore di emergenza