presse per legno usati in vendita

Veneer press Brand: ORMA Type: NPC/DIGIT 6/90 New machine Technical datas: Press area: 2500x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (up to 120°C) Optional: - Aluminium coating - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - Extra charge for temperature up to 150°C - Extra charge for temperature up to 200°C - Mylar protection foil 350,00 ? per panel - Pressure plate covered with glass fiber fabric Teflon - Hardware for Industry 4.0

Hot press Make: ORMA Type: NPC/DIGIT 6/95 New machine Technical datas: Press area: 3000x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (120°C) Optional: - Aluminium coating for panels - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - 4 side loading - Max. temperature up to 150°C - Max. temperature up to 200°C - Mylar protection foil - Pressure plate covered with glass fier fabric Teflon - Hardware for Industry 4.0

Hot plate press (electric) Brand: ORMA Type: NPC 6/120 new machine Technical data: Heating plates: 3500x1300mm Cylinder: 6 pieces Press force: 120t Stroke/opening dimension: 450mm Connection value: 28.8kW (ELKOM plates) Options: - Intermediate plate - Anodized surface for ELKOM panels - Parallelism sensor á 1,000.00 EUR - Pressing mechanism from above (fixed lower plate) - Max. temperature till 150°C - Max. temperature till 200°C - 4-sided loading possible - Mylar protective film - Fiberglass Teflon protection - Hardware for Industry 4.0

New longitudinal veneer splicer Brand: CASATI Type: LINEA 1250 Technical details: Arm length 1.250 mm Veneer thickness 0,4 - 4 mm Min. veneer length 350 mm Min. veneer width 45 mm Glue for pre-gluing: Urea and PVA Glue for integrated gluing: Urea Feed speed 10 - 40 m/min. Heating area length 1.250 mm Total connected load 7,4 kW Power consumtion approx. 6 kw Compressed air consumption 5 Nl/min Compressed air pressure 6 - 8 bar This machine permits the longitudinal splicing of veneer sheets by applying glue on their edge. Immediately afterwards the veneer will be passing through a heated zone in order to activate the glue reaction: the glue will be hardening thus bonding the veneer sheets. The integrated glueing device allows the joining by one only process. Its also possible to bond pre-glued veneer sheets Option for an extra charge: Cooling device for the glue po ...

New hot press, hydraulically Brand: ITALPRESSE Type XL/6 30-13 PEA Golden electric heating plate surface anodized to ensure high surface hardness and excellent corrision protection. - Electrical - heating plates: 3000 x 1300 mm - Total pressure: 120 to. - Number of hot plates: 2 pc. - Number of floors: 1 pc. - Stroke: 350 mm - Day light opening: 350 mm - All-round feeding - Number of cylinders: 6 pc. - Diameter of cylinder: 85 mm - Power consumption (hydraulic unit): 3 kW - Electric - combi - heating plates made out of two components: Aluminium - electric - heating plate Iso printing plate - Heating power 22 KW - High pressure isolation plates - Operating temperature: 70 - 90° C. - Max. Temperature: 120° C. - Supply: 400V/50 Hz - Safety accordance with CE standard Standard equipment: - Movement of the press table with rack and pinion parallel guidance at t ...

Capacity: 50-80 kg/hDiameter of the briquets: 70 mmMotor output: 7,5 kWDimensions (L/W/H): 2135 x 1565 mmWeight: kg: Kg: m³The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 250 - 400 ton V ? Ring nominal force: 20 - 200 ton Counter ram nominal force: 10 - 100 ton Ram stroke: 30 - 200 mm V-Ring stroke: 40 mm Counter ram stroke: 40 mm Max. die size: 765 x 760 x 610 mm Number of strokes: 40 s.p.m. Approach speed: 120 mm / sec Return speed: 135 mm / sec Working speed: 5 - 50 mm / sec Die Weight total: 2400 kg

Capacity: 250 ton V ? Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Ram stroke: 67 mm Table surface area : 560 x 600 mm Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg

Inclination: 15°, an on-site visit is possible.

Working height: 300mm-1300mm, working length: 300mm-2500mm, working depth: 140mm-700mm, working table height: 500mm, max. pressure force: 12kN. Control defective. Documentation available.

An Impressafiner is available for dewatering in the timber industry. Operating pressure: 8bar, weight: approx. 15500kg. Documentation available. On-site inspection is possible. The machine is as good as new and is in its original packaging.

A fines press for dewatering for the wood industry is available. Screw diameter: 260mm, dewatering basket length: 520mm/100mm, speed: 29rpm, weight: approx. 830kg. Documentation available. On-site inspection is possible. The machine is as good as new and is in its original packaging.

An Andritz gluing press for the interlocking connection is available. Press dimensions X/Y: 200mm/3850mm, upper press temperature: 175°C, operating pressure: 0.6bar, pressing time: 20min, cooling temperature before dismantling: 50°C, total weight: approx. 900kg. The machine was rebuilt so that it only consists of 2 individual parts and can be moved with a forklift. The dismantled components of the machine (control, pump, etc.) are still present. Documentation available. On-site inspection is possible.

Two identically constructed heated Ital presses are available. Press length: 1700mm, press width: 1500mm, press height: 1400mm, press force: 800kN, total connection: 30kW, machine dimensions X/Y/Z: approx. 5400mm/2300mm/3200mm. Including piston from above, fittings for chair seats and heating. Documentation available. On-site inspection is possible.

This WEMHÖNER KT-F-1E laminating press was manufactured in 1994. It features a short-cycle pressing line capable of handling panel dimensions up to 4405 mm in length and 1390 mm in width, with thicknesses ranging from 6 to 38 mm. The system includes roller conveyors, a double-sided feeding station, and a stacking station, ideal for efficient large-scale production. Contact us for more information about this machine.

INDICAZIONI: Dimensione bricchetta: Ø 50 mm Potenza installata: 8,5 kW

INDICAZIONI: Funzionamento ad acqua Piastre montate Dimensioni del tavolo: 3000 x 1200 mm 6 pistoni: Ø 50 mm Corsa del pistone: 500 mm ATTREZZATURA: 1 termostufa

press capacity:950 kNcontrol:Siemens S7 Required air-pressure:6 barloading area:1200 x 600 mmPressure power:1000 kNtotal power requirement:18 kWweight of the machine ca.:6200 kgdimensions of the machine ca.:2600 x 1300 x 3100 mm

Stella di incollaggio con piastre riscaldanti. Collegamento 30 KW. Quattro superfici di pressatura. Idraulico, pneumatico. Seguiranno altre date.

Pressa elettroidraulica della piastra di riscaldamento, Acqua calda, area pressa 2500 x 1350 mm.

Pressione: 7 TGola: 180 mmCorsa: 100 mmSuperficie del tavolo: 300x300 mmSuperficie del pistone: 105 mmForo nel tavolo: 60 mmAltezza del tavolo: 1050 mmForo dell'utensile nel pistone: 30 mmPotenza totale richiesta: kWDimensioni della macchina ca.: BxTxH 1200x1200x2100 mm

pressure: 20 tdistance between columns: 450 mmstroke: 100 mmtable surface area: 440x320 mmram surface: Ø140 mmhole in the table: Ø50 mmtable height: 900 mmtool hole in ram: Ø40 mmtotal power requirement: 3 kWweight of the machine ca.: 2 tdimensions of the machine ca.: BxTxH 1400x1200x2200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 tthroat: 260 mmstroke: 100 mmtable surface area: 500x400 mmhole in the table: Ø50 mmtable height: 900 mmram surface: Ø140 mmtool hole in ram: Ø40 mmweight of the machine ca.: 2 tdimensions of the machine ca.: BxTxH 1200x1400x2200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine no. 10832, plate length approx. 2500 mm, plate width approx. 1100 mm, electric aluminum heating plates, max. passage height approx. 400 mm, 4 cylinders with diameter approx. 80 mm3000 x 1500 x 2200 mm2900 kguncheckedloaded on truck

Heavy series pellet mill, 380 volt power supply, 100 kg hourly production1200 x 800 x 800 mm100 kguncheckedloaded on truck

Heavy series pellet mill, 380 volt power supply, 100 kg hourly production1200 x 800 x 800 mm100 kguncheckedloaded on truck

Heavy series pellet mill, 380 volt power supply, 100 kg hourly production1200 x 800 x 800 mm100 kguncheckedloaded on truck

Heavy series pellet mill, 380 volt power supply, 100 kg hourly production1200 x 800 x 800 mm100 kguncheckedloaded on truck

Heavy series pellet mill, 380 volt power supply, 100 kg hourly production1200 x 800 x 800 mm100 kguncheckedloaded on truck

Heavy series pellet mill, 380 volt power supply, 100 kg hourly production1200 x 800 x 800 mm100 kguncheckedloaded on truck