fresatrici usati in vendita (2,440)

Tool diameter: mmsanding disc diameter: mmMotor output: 3 kWtotal power requirement: 3 kwWeight: 1.400 kgOverall size: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Corsa X: 800 mmCorsa Y: 340 mmCorsa Z: 460 mmControllo: Fanuc Potenza totale richiesta: kWPeso della macchina ca.: 3,5 tDimensioni della macchina ca.: m

Vendo il nostro vecchio centro di lavoro di fresatura verticale come distributore di pezzi di ricambio, purtroppo non posso dire cosa ha esattamente la macchina, so solo che la centralina è difettosa

Tavolo girevole magnetico come da foto. Ulteriori informazioni su richiesta

x-travel: 2.600 mmy-travel: 700 mmz-travel: 700 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: 20 - 18.000 min/-1power capacity - main spindel: 35 / 25 kWtool taper: SK 40 work table:: table surface area: 2.900 x 700 mmmax. table load: 2.150 kgtool magazin:: number of toolpositions: 30 pos.tool taper: SK 40 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmmax. tool weight: 6,0 kgfeeds:: rapid traverse ( X / Y / Z ): 40 m/minfeed speeds: max. 40.000 mm/minfeed power: max. 8 kNtotal power requirement: 54 kVAweight of the machine ca.: 14,4 tdimensions of the machine ca.: 8,0 x 5,6 x 2,8 mChip conveyor: Coolantsystem: high pressure coolant: 40 bar through spindle coolant: Rotary screen: 2x Signal-Light: paper band filter: interface 4. axis: indexing attachment: Hofmann - RWNC-220L tool setting: Blum - LaserCo ...

x-travel: 1000 mmy-travel: 500 mmz-travel: 700 mmtable surface area: 1250 x 700 mmspindle taper ISO: 50 spindle turning speed range: 20 - 3200 U/minquill stroke: 100 mmsemi-automatic operated: Phillips 432 Number of working hours: 62.340 hmain drive motor: 22 kWtotal power requirement: 27 KVAweight of the machine ca.: 7,7 tbase area: 3,8 x 4,1 x 2,4 mmaccessories:: hydr. Schraubstock X axis, longitudinal 1,000 mmY axis, vertical 500 mmZ axis, cross 700 mmMin./max. distance from vertical spindle to table top 138 / 600 mmOverhang max. approx. 800 mmSpindle taper SK 50 with inner coolingSpindle speeds (infinitely variable in 2 steps) 20 - 3,200 rpmFeed motion YXZ 1 - 3,000 mm/minRapid traverse XZ 6,000 mm/min, Y = 5,000 mm/min.Rotary axis as 4th axiswith housing of the working areaThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diametro massimo della ruota: 406 mmLarghezza dell'ingranaggio: 420 mmModulo massimo: 4,3 Min. Modulo: 0,5 Velocità di rotazione del creatore: 49 - 246 U/minDiametro del foro della tavola: 80 mmPotenza totale richiesta: 7 kWPeso della macchina ca.: 3,5 tDimensioni della macchina ca.: 2,8 x 1,6 x 2,2 mAnno di costruzione circa 1980

max. workpiece diameter: 500 mmthreading length: 1250 mmmax. module: 10 min. module: 1 workpiece dia. over saddle: 250 mmspindle bore of workspindle: 102 mmquill stroke: 100 mmworkpiece turning speeds: 0,0032 - 2,6 U/minfeeds - rolls: 0,027 - 5,66 mm/WUfeeds - longitudinal: 0,3 - 198 mm/minmain drive: 4 kWswivel angle for work spindle: 90/120 °diameter of hob: 150 mmmilling width: 100 mmhob turning speeds: 45 - 560/900 U/mintotal power requirement: 9,5 kWweight of the machine ca.: 4,2 tMachine equiped with:- Heavy Duty Hob Head ApFw- change gears- Milling Head ApFF- Single Indexing Device ETE- Bush Rest- Coolant TankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mmy-travel: 920 mmz-travel: 900 mmtable surface area: 1800x700 mmT-slot - distance: 120 mmTable load: 3000 kgspindle taper ISO: 50 power capacity: 22/30 kWspindle turning speed range: 60-3000 U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mAbout usmore than 400 machines in the warehouse over 12000 m² storage area,crane capacity 70 tmore than 1000 items accessories for your workshopYou wantto sell machines production lines or your company, then talk to us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mmy-travel: 1000 mmz-travel: 1000 mmControl: Heidenhain type: TNC 430 : spindle turning speed range: 15-1450 U/minTable area: 2300x1200 mmSpindle: 200 mmspindle stroke: 200 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mNr 3762Maschine wurde überholtmachine is retofitThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2.200 mmy-travel: 560 mmz-travel: 720 mmcontrol: iTNC 530 Heidenhainturning speed range - milling: 20 ~ 12.000 U/minpower capacity - milling spindle: 35 / 25 kWtool taper: SK 40 tool piece magazine with: 100 pos.table surface area: 2.600 x 600 mmrapid traverse X-axis: 100 m/minrapid traverse Y-axis: 50 m/minrapid traverse Z-axis: 50 m/minmax. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmmax. tool weight: 6 kgmax. table load: 2.200 kgtotal power requirement: kWweight of the machine ca.: 12 tdimensions of the machine ca.: 7,0 x 4,2 x 2,7 mChip conveyor: Coolantsystem: interface 4. axis: 4. axis: 560 mmSeperating wall: oil mist extraction: Tailstock: 350 mm / MK 5 elektr. hand wheel: through spindle coolant: 40 barTravelling column milling machineDECKEL MAHO - DMF 220 Linear- new spindle installed (April 2024)- incl. 4th Axis 560mm and  ...

x-travel: 17700 mmy-travel: 4755 mmz-travel: 800 mmmilling width: 3450 mmdistance table - vertical milling spindle: 3682 mmtable height over floor: 500 mmspindle diameter in front bearing: 200 mmturning speed range: 12 - 450 U/mintool taper: ISO 60 axial adjustment of the spindle slide: 800 mmcreep feed: 5 und 50 mm/minfeed stepless: 10 - 3000 mm/mincross adjustment of cross beam milling head: 4745 rapid traverse: 2 m/mincreep feed: 3 und 30 mm/minfeed stepless: 6 - 2000 mm/minrapid traverse: 10 m/mincreep feed: 3 und 30 mm/minfeed stepless: 6 - 2000 mm/minvertical adjustment of cross beam: 3682 mmrapid traverse: 1,5 m/mincreep feed: 1,25 und 12,5 mm/minfeed stepless: 5 - 1500 mm/mintable-size: 17800x2800 mmcolumn daylight: 3600 mmControl: SIEMENS 840 C table load: 50.000/100.000 kgdrive of main spindle: 100 kWtotal power requirement: 170 kWweight of the machine ca.: 300 tdimensions of t ...

: 600 mm: 500 mm: 400 mm: 1000x500 mm: 1200x250 mm: 40-3200 U/min: DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1050 mm: 480 mm: 550 mm: 1524x380 mm: SK 40 : 127 mm: 105 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 560 mm: 320 mm: 400 mm: 950x450 mm: 1050x320 mm: 25-3600 U/min: SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1200 mm: 580 mm: 550 mm: 1575x425 mm: SK 40 : 152 mm: 110 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1700 mmy-travel: 800 mmz-travel: 890 mmtable surface area: 2000 x 630 mmspindle taper: SK 50 spindle turning speed range: 35 - 3000 U/minspindle drive: 26 kWfeeds longditudinal/cross/vertical: 6 - 5000 mm/minrapid traverse: 15 m/mintable load: max. 6000 kgcontrol: HEIDENHAIN control: TNC 360 total power requirement: 45 kVAweight of the machine ca.: 13 tdimensions of machine L x W x H: 5,2 x 2,78 x 2,95 mAccessories: vertical head swivelling in 2 planes with hydr. tool clamping, various tool fixtures, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1050 mmy-travel: 560 mmz-travel: 510 mmtable-size: 1200 x 560 mmspindle taper ISO: 50 turning speed range: 15 - 4000 U/minfeeds longditudinal/cross/vertical: 1 - 3000 mm/minrapid motion -longitudinal/cross/vertical: 10 m/mindistance spindle nose and table: 150 - 660 mmdistance spindle center to column: max. 650 mmtable load: max . 1 tno. of tools in magazin: 24 tool diameter: 110 mmworkpiece length: 350 mmweight of tools max.: 15 kgspindle drive: 7,5 kWcontrol: FANUC 11 MA total power requirement: 13 kWweight of the machine ca.: 9,3 tdimensions of machine L x W x H: 3,55 x 2,64 x 2,68 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 400 mmz-travel: 400 mmtable surface area: 800 x 400 mmspindle taper: SK 40 control: HEIDENHAIN TNC 310 spindle turning speed range: 10 - 3150 U/minspindle drive: 5,5 kWfeed - longitudinal/cross: 1 - 5000 mm/minfeeds vertical: 0,5 - 2500 mm/minrapid traverse: 6 / 6 / 3 m/mintotal power requirement: 10 kVAweight of the machine ca.: 2,5 tdimensions of machine L x W x H: 2,16 x 1,70 x 2,0 mAccessories: solid table, vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mmy-travel: 940 mmz-travel: 1000 mmtable surface area: 3250 x 800 mmspindle taper: SK 50 spindle turning speed range: 40 - 1800 U/minfeeds longditudinal/cross/vertical: 0 - 2250 mm/minrapid traverse: 6 m/mintable load: 4500 kgcontrol: HEIDENHAIN, TNC 355 total power requirement: kWweight of the machine ca.: 10,3 tdimensions of machine L x W x H: 4,50 x 2,69 x 2,71 mAccessories: vertical head swivelling in 2 planes with hydr. tool clamping, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmTurning diameter500 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN ...

Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.65 mmGeneral- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Work spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN ...

GeneralIntegrated Mill Turn Center; Control: Control F31iB5 with CELOS CharacteristicsSwing- Ø, max.700 mmMilling spindle upper side1 Bar diametre80 mmSpeed max.4000 rpmMax. Turning Length1530 mmMax machining diameter670 mmDrive power tool spindle5,5/3,7 kWDrive power milling spindle28/23 kWDrive power main spindle18,5/15 kWMovements X / Z200/1542 mmLower Turret10 PositionsNumber of Toolmagazine positions38 Speed max.12000 rpmSlewability of B-Axis±120 degreeMovements X / Z / Y675/1562/300 (±150) mmWeight approx.18500 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p(Left Spindle) through-spindle hole dia. 91 mm, 4,000min-1 (STD)(Left Spindle) Through-spindle H ...

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Cross650 mmLongitudinal735 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools90 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.12400 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmCentre bore 50 mmMaximum load (table centre) 600 KgSlot width 14 mmNumber of Slots 9Rotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRo ...

GeneralUniversal Machining Centre in monoBLOCK construction - MPC Machine Protection Control; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal750 mmCross650 mmVertical560 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWTorque (100% DC)86 NmTorque (40% DC)130 NmSpeed range- 20000 rpmSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmMiscellaneousClamping SystemHSK-A 63 Floor space/WeightWeight approx.12300 KgNC swivel rotary tableTable surface 800 x 650 (Ø 650) mmCentre bore 50h6 mmMaximum load (table centre) 600 KgDirect measuring systemDi ...

GeneralUniversal machining centre; Control: Siemens 840D-Powerline ShopMill Classic Technical DataRapid traverse longitudinal/transverse/vertical60/60/60 m/minFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 63 Tool changerType of magazineChain ApplicationUniversal Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machiningProd. package 40 bar/23 l/minProduction package 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) tank 900 l, rotating clear-view window, scraper flight conveyor coolant through spindle centre form ADNC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 1000 x 800 mmTool magazine,chain, 60 pocket ...

GeneralUniversal machining centre; Control: Siemens 840D-Powerline ShopMill Classic Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Cross1000 mmLongitudinal1250 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 100 Tool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machiningProd. package 40 bar/23 l/minCoolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pumpNC rotary table with pallet changerType of Measuring system Direct measurin ...

GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal400 mmCross400 mmVertical375 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mWeight approx.7200 KgDie and Mold Package linearDie and Mold Package linear Dynamic package V-type Eagle timing belt for Z axisPackage Mill / TurnPackage Mill / Turn (only available for Siemens 840D solutionline) NC-Mill-turn table 450x450 mm / 17.7x17.7 in rounded down to d460 mm / 18.1 in ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/mininlineMASTER® spindlespeed range 20 - 15.000 min-1Drive power (100% DC) 14,5 kWDrive power (40% DC) 20,3 kWSpeed range 20 - 15000 rpmTorque (40% DC) 121 NmTorque (100% DC) 84 NmSpindle taper HSK-A 63Clamping System HSK-A 63Tool clamping for HSK-A63Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformationTool magazine 60 ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal550 mmVertical420 mmCross450 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/mininlineMASTER® spindlespeed range 20 - 15.000 min-1 SK40 suitable for BIG-PLUS® toolsDrive power (100% DC) 14,5 kWDrive power (40% DC) 20,3 kWTorque (100% DC) 84 NmTorque (40% DC) 121 NmSpeed range 20 - 15000 rpmSpindle taper SK40 Tool holder DIN ISO 7388-1-AClamping System DIN ISO 7388-3-A, ADToolchanger with set up station for tool loadingNumber of tools 30NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformat ...