fresatrici usati in vendita (2,441)

Diametro utensile: mmdiametro disco abrasivo: mmPotenza motore: 5 kWPotenza totale richiesta: kwPeso: 1.500 kgDimensioni complessive: mmControllo: cnc

x-travel: 580 mmy-travel: 200 mmz-travel: 340 mmspeeds: 115 - 1750 U/mintable surface area: 1000 x 240 mmtool taper: ISO 40 total power requirement: 4,5 kWweight of the machine ca.: 820 kgdimensions of the machine ca.: 1290 x 1090 x 2170 mmUniversal precision drilling and milling machine for horizontal and vertical milling work with digital 3-axis position display DPA 31 PlusDescription:- Heavy, solid design made of high-quality, vibration-absorbing gray cast iron- Oil bath gear with ground, hardened gear wheels- Coolant system- Halogen machine lamp with bundled beam- Solid and large cross table, precisely surface-machinedwith T-slots and adjustable wedge strips- Milling head can be tilted ± 45°- Right/left rotation- X-axis moves either with the handwheel or via the table feed device- Automatic limit switch on the X-axis- Height-adjustable protective screen with microswitch, against fl ...

x-travel: 3000 mmy-travel: 4000 mmz-travel: 1500 mmControl: Heidenhain TNC 430 M total power requirement: 120 kVAweight of the machine ca.: 83,2 tdimensions of the machine ca.: m3/5 axes CNC portal milling machine with integrated C-axisand changeable milling heads.The machine had a purchase price of € 1.4 million in 2002.An inspection in the sellers plant under power is possible afterprevious appointment.Condition:The machine was overhauled in 2018, costs of over € 100.000,-.- Drives of the X-axis renewed- New hydraulic power unit- Complete electrical wiring renewed- Spindle cooling unit new- 2 pieces longitudinal conveyors new- Coolant pump new- Cover complete X-axis new- Bellows Y-axis new- Exchange measuring ruler X-axis- Fork head spindle bearing newBelleville spring assembly newDrive motor A-axis newSpindle cone ground- Overhaul milling gear (2020)Working rangeTravelsX-axis 300 ...

x-travel: 2500 mmy-travel: 1300 mmz-travel: 900 mmControl: Heidenhain iTNC 530 table surface area: 2500 x 800 mmtable load: 5,0 ttool taper: SK 50 DIN69871spindle turning speed range: 36 - 4000 U/minfeed range: 2 - 12000 mm/minmain drive: 25 kWtotal power requirement: 50 kWweight of the machine ca.: 17 tdimensions of the machine ca.: 8,4 x 4,5x 3,8(3,9) mThe main engine was overhauled in September 2022 for € 6,000.The machine was partially overhauled in 2007Scope of overhaul:Feed motors were overhauledNew Heidenhain iTNC 530 control system with newmain spindle drive (Siemens)Retention of the control cabinet and feed drivesGeometric overhaul of the machineOverhaul of the tool changerDefective guideway covers were repaired or replacedThe milling head was completely overhauled approx. 3 years ago.Equipment:CNC control Heidenhain iTNC 530Horizontal/vertical swivelling milling headSeparate  ...

: 585/600 mm: 465/480 mm: 385/400 mm: 900x500 mm: 1200x250 mm: 40-2000 U/min: SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diametro massimo della ruota: 350 mmlarghezza dell'ingranaggio: 350 mmmodulo massimo: 8 minuti modulo: potenza totale richiesta: 7,5 - 22 kWpeso della macchina ca.: tdimensioni della macchina ca.: mDentariatrice con dispositivo di sagomatura degli ingranaggi, ciclo a 2 tagli

x-travel: 600 mmy-travel: 250 mmz-travel: 350 mmtotal power requirement: 5,5 kWUniversal Production and Toolroom Milling MachineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 150 mmgear width: 300 mmmax. module: 4,5 min. module: total power requirement: 20 kWweight of the machine ca.: 6 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hobbing length: 2100 mmmilling width: 300 mmmax. module: 16/18 min. module: total power requirement: 10 kWweight of the machine ca.: 5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diametro massimo della ruota: 0 mm Numero massimo di denti: 0 Modulo massimo: Modulo minimo: Potenza totale richiesta: kWPeso della macchina ca.: t Dimensioni della macchina ca.: mFresatrice a controllo numerico per anelli sincroni

X-corsa: 780 mmY-corsa: 220 mmZ-corsa: 410 mmLunghezza tavola: 1100 mmLarghezza tavola: 270 mmGamma di velocità di rotazione del mandrino: 40 - 960 U/minCono mandrino: SK 40 potenza totale richiesta: kWpeso della macchina ca.: 1,7 tdimensioni della macchina ca.: 1,8 x 1,6 x 1,8 m

x-travel: 600 mmy-travel: 400 mmz-travel: 500 mmtotal power requirement: 1,5 kWweight of the machine ca.: 1800 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 710 mmy-travel: 500 mmz-travel: 500 mmtotal power requirement: 24 kWweight of the machine ca.: 7 tdimensions of the machine ca.: mM I K R O N (Switzerland)CNC Controlled Universal Milling Machine with Tool ChangerModel WF 54 VH CNC Year 1991 Serial No. 5110302________________________________________________________ Table travel, X axis, longitudinal 710 mmTable travel, Z axis, vertical 500 mmMilling head travel, Y axis, cross 500 mmMounting height below vertical spindle, approx. 600 mmNC rotary table 800 mmResolution of rotary table, C axis 0.001 °Spindle taper SK 40Spindle speeds, 3 steps, infinitely variable 10 - 6,300 rpmFeeds, XYZ 2 - 4,000 mm/minQuickfeed, XY 10,000 mm/minQuickfeed, Z 8,000 mm/minSpindle drive, approx. 15 kWTotal electrical load, approx. 24 kW - 380 V - 50 HzWeight, approx. 7,000 kgAccessories / Spe ...

Corsa X: 500 mmCorsa Y: 400 mmCorsa Z: 400 mmControllo: Potenza totale richiesta: kWPeso della macchina ca.: tDimensioni della macchina ca.: m

x-travel: 600 mmy-travel: 300 mmz-travel: 350 mmtable-size: 1120 x 260 mmspindle taper ISO: 40 spindle turning speed range: 67 - 2010 U/minquill stroke: 120 mmbore capacity in steel: 40 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1,3 tdimensions of the machine ca.: 1,58 x 1,45 x 2,15 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mmy-travel: 400 mmz-travel: 380 mmtotal power requirement: 2,6 kWweight of the machine ca.: 1,5t tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mmy-travel: 330 mmz-travel: 350 mmtotal power requirement: 6,3 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 736 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mmx-travel: 850 mmy-travel: 435 mmControl: HEIDENHAIN TNC 150 total power requirement: 16 kWweight of the machine ca.: 3500 kgdimensions of the machine ca.: mF E H L M A N N (Switzerland)CNC-Controlled High Precision Drilling and Milling Machine withHEIDENHAIN CNC-Control Model TNC 150 Model PICOMAX 100 CNC – 2 + A Year 1985 Serial No. 16 085 109_______________________________________________________________Tabl e travel: Longitudinal ( X-Axis) 850 mm Cross (Y-Axis) 435 mmMilling/Boring head travel vertical ( Z-Axis) 210 mmTable size /Clamping area 500 x 1.570 resp. 390 x 1.280 mmMounting height below spindle, approx. 140 / 690 mmHeight adjustment of Milling head max. 540 mm ...

x-travel: 310 mmy-travel: 340 mmz-travel: 170 mmtotal power requirement: 2,5 kWweight of the machine ca.: 900 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 150 mmz-travel: 340 mmtotal power requirement: 2 kWweight of the machine ca.: 660 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Corsa X: 400 mmCorsa Y: 300 mmCorsa Z: 400 mmPotenza totale richiesta: 3,6 kWPeso della macchina ca.: 1,3 tDimensioni della macchina ca.: M

x-travel: 630 mmy-travel: 500 mmz-travel: 500 mmControl: CNC total power requirement: 13 kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1800 mmy-travel: 1200 mmz-travel: 900 mmtotal power requirement: 50 kWweight of the machine ca.: 15 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Corsa x: 0 mmCorsa y: 0 mmCorsa z: mmPotenza totale richiesta: kWpeso della macchina ca.: tdimensioni della macchina ca.: mMarcatrice per pezzi cilindrici, tavola rotante, 4 assi, PV 70 Testa

max. wheel diameter: 0 mmgear width: 150 mmmax. module: 2,5 min. module: total power requirement: 10 kWweight of the machine ca.: 2400 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 280 mmmax. number of teeth: 100 max. module: 6 min. module: 1 total power requirement: 6 kWweight of the machine ca.: 2500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diametro: 0 mmLarghezza: 0 mmForo: mmTesta tangenziale per creatore RS 2 - disponibile anche: Testa tangenziale per creatore RS 00 !

x-travel: 300 mmy-travel: 450 mmz-travel: 150 mmtotal power requirement: 1,5 kWweight of the machine ca.: 500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 30 mmworkpiece diameter: 30 mmthreading length: 110 mmthreading length: 110 mmthread pitch: 0,5-2,75 mm/GGthread pitch: 0,5-2,75 mm/GGtotal power requirement: 4,5 kWtotal power requirement: 4,5 kWweight of the machine ca.: 1,7 tweight of the machine ca.: 1,7 tdimensions of the machine ca.: mdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 400 mmmax. number of teeth: 150 max. module: 5 total power requirement: 16 kWweight of the machine ca.: 10 tWorkpiece Ø, min./max. 30 - 400 mmNumber of teeth 6 - 150Module range, max. 5 Tool holder shaft Ø SK 30 / 20Tool speeds 4,000 rpmSpindle drive max. infinitely variable 1.8 kWFeeds, longitudinal and cross 0.001 - 12 m/minWorkpiece speed, max. (1.5 kW) C Axis 2,000 rpmWorkspindle slide 400 mmTool speed, max. 3,000 rpmTool holder SK 30Total electrical load, approx. 16 kW - 380 V - 50 HzWeight, approx. 10,000 kgAccessories / Special Features BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process. 2 workspindle units, left and right, which can be set at any angle. CNC controlled: Z and W Axes for tool cross slide.  ...