Gebr. Stair formwork / delta formwork ramp, make HOWAL, for straight stairs - mechanically adjustable, stairs can be made in installation position up to approx. 2.26 m wide and 18 gradients, max. platform length: 2.00 m  ...

• more information

1 Gebr. Column formwork - Twin formwork - Length of formwork 16 m - max. chamber dimension 1.00 x 1.00 m - Steel formwork - incl. 10 vibrators - incl. converter - incl. control system Formwork is hydraulically movable  ...

• more information

racks: 17; support tube spacing: 60mm; rack length: 650mm; langth: 200 - 2000mm; rolls: Polyamid 4 Stück; depth: 870 - 1180mm; height: 198mm; safe load: 400kg; The user-friendly Varioflex drying rack is a space-saving and gentle solution for storing painted workpieces. The four swivel castors mean that it can also be used for transporting workpieces. Its solid tube frame design can be adjusted between 200 mm and 2,000 mm. With 17 inside and outside plastic-coated support tubes on each side, the rack can support up to 400 kg of evenly distributed weight. The plug-in inside and outside support tubes can be taken out and re-inserted as needed. When not in use, the drying rack can be c ...

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500 x 1500 Useful length: 9000 mm Chamber number: 129 Cake thickness: 30 mm Filter pressure: 16 bar Closing pressure: 380 bar Test pressure: 440 bar Operating temperature: 50 C Total filter area: 460 m2 Cake volume totalling: 6.2 m3 Motor voltage: 380 volts Plate material: PP Operation page: Right and left Plate transport: fully automatic

used chamber filter press / filter press Passavant A 1500 record size: 1500 x 1,500 mms benefit length: 10,510 mms chamber number: 160 pieces cake thickness: 30 mms cake contents: 8.4 m3 filter pressure: 16 cash Schliessdruck: 380 volts expiry: unanimously whole filter surface: 614.5 m² engine tension: 380 volts / 50 hertz

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500x1500mm Cake thickness: 30 mm Chamber number: 118 units Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Expiration: closed Plate material: PP  ...

• more information

ARBURG injection moulding machine Type: 420 V 800-150-150 2Component, with turntable controller: SELOGICA year: 1998 Clamping unit Clamping force t Gap between 80 mm: 500 Holm dimension mm: 420 x 420 min/max height mm: 250 Plate size: 545 x 545 Injection unit Screw diameter mm: 25/25 Injection weight gr: 49/49 Injection volume cm m³: 54/54 Spray pressure bar: 2500 Dimensions and weights Dimensions Lxwxh m: 4.7 x 1.7 x 2.1 machine weight kg: 5000 Miscellaneous 2 Component with turntable (with turntable)

Injection moulding machine 3-colours (horizontal /vertical/ and 3rd in L-position with protective enclosure) with turntable available now from our warehouse Hannover Make: Arburg Type: 420C 1000-150/150/60 Built in 2003 Control: Selogica Hours: 20092 h +Closing Unit+ Clamping force: 1000 kN / 1000 to. Tie bar ratio: 420 x 420 mm Plate size: 570 x 570 mm Injection Unit 1 (150 unit) Screw size: 15 mm (high-screw) Pvlzwy Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 2 (150 unit Screw size: 15 mm (high-screw) Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 3 (60 unit) Screw size: 15 m ...

coolant capacity: 110 l/min Capacity: 0,25 Watt conveying height: 10 total power requirement: 0,25 kW voltage: 400 V 0: 3/4 mm Suction depth: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• more information

sheet width: 100 mm coil outside dia.: 800 mm weight max. in kg: 150 kg speed: 0 - 60 m/min total power requirement: 2 kW weight of the machine ca.: t dimensions of the machine ca.: 2,89 x 1,38 x 1,4 m : 2 x 150 kg band width: 100 mm diameter of the mandrel: min. 170 max. 540 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.