Specifications: - working length 3500 mm - Stand passage 3050 mm - max pressing force 2000 kN - Distance table / ram max. 480 mm - Stand projection 260 mm - Ram stroke approx. 300 mm - Lifting speeds - Downspeed idle max. 100 mm/sec - Boost speed 80 mm/sec - Downward pressing speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - Weight approx. 16000 kg -with: - CNC control CYBELEC renewed in 2008 - controlled crowning device - controlled backgauge with height adjustment 5 - 1000 mm - hydr. Tool clamping - Upper tool + universal die tool - Material requirements - Two-hand contr ...

Bending tool, die, lower knife, lower tool, lower beam, -Tool: for folding machine -Widening: for lower cheek -Dimensions: 33/76/3040 mm -Bore distance: 280 mm -Hole diameter: 18 mm -Length: 3040 mm -Weight: 33 kg ...

• more information

Hydraulic press brake - conventional including paternoster system for uncomplicated tool change with 25 hangers. for export NC Press Brake Heut Lotze Type: PZ 100 - 25 Built in 1973 Pressure 100 t Bending length 2500 mm Stand width 2100 mm Weight approx.: 11.000 kg, Dimensions (LxWxH) approx.: 3,100 x 2,300 x 2,700 mm -------------------------- Paternostar system Schwab Maschinenbau Type: SIB 430/340 Built in 1982 Number of compartments 25 max. shelf load 150 Dpa max. device payload 3750 Press brake and paternoster can be purchased separately Maschinenhandel Nord new & used machines for industry, trade and commerce Import/Export Service & Advice Also ta ...

Working width: 2500 mm sheet thickness: 4 mm throat depth: 70 mm rear gauge: 520 mm power: 380 V, 6.3 kW space: 3200 x 2300 x 1270 mm weight: 4600 kg  ...

• more information

Working width: 5050 mm thickness: 10 mm power: 30 kW space: 2450 x 5600 x 2500 mm weight: 28000 kg  ...

• more information

CNC press brake make LOTZE type PZ 150Machine -No: 20327455 built in 1982 only 3200 operating hoursTechnical specifications:max.pressing force: 150 tmax.working length: 4500 mmTable width: 350 mmStand passage: 4000 mmInstallation height: 500 mmThroat: 200 mmTable height: 900 mmOpening width: 490 mmTable under the floor: 580 mmmot.backgauge: 5 - 1000 mmDownward speed idle max .: 100 mm / IUpward speed: 68.2 mm / lPress speed: 7.5 mm / lDrive power: 12.5 kWDimensions: 5400 x 2000 x 3500 mmWeight approx: 16000 kgwith- CNC control Cybelec DNC 70 (faulty) Control was retrofitted or converted in 1993- Universal die 90 x 90 divided, 4000 mm long- divided deer foot tool 4000 mm long, height 165 mm- ...

Motorized folding machine make LOTZE type HZK 25 2500/3Machine -No: 1827 built in 1956Max. Working length: 2540 mmMax. Sheet thickness: 3.0 mmmin. Inner bending radius: 4.0 mmMax. Opening width of the upper beam: 300 mmOpening width of the bending beam: 40 mmWorking height: 800 mmDrive power: 3.5 / 2.2 kWDimensions: 4200 x 1400 x 1600 mmWeight approx: 3.75 tWith- gear lever gearbox for opening and closing,xa0xa0xa0 Bending and returnused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your q ...

Hydraulic sheet metal shears make LOTZE type TS 3000/5machine -No: 2623003 year 1975Technical specifications:Max. Effective length: 3040 mmMax. Sheet thickness steel: 5.0 mmMax. Sheet thickness stainless steel: 3.0 mmOutside dimensions approx: 3750 x 1255 x 1600 mmWith- motor backgauge with handwheel fine adjustment- Cutting length limit- Angle stop front- Table extension- Footswitchused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tool ...

Motorized sheet metal shear make LOTZE Year of construction approx. 1960 Working length: 1500 mm Sheet thickness (steel): 8 mm Motor power approx .: 17 kW External dimensions approx. L x W x H approx .: 2500 x 1900 x 1600 mm Weight approx .: 5 t With: - 2 front support arms - Angle stop - Foot release - Finger guard used, in very well maintained and functional condition Price on request. Delivery: ex warehouse or location free loading truck. Payment: net at takeover or by appointment. Technical data are not binding. Errors excepted. We would be pleased, if you like our offer and are always available for your queries. Best regards M. Waldeck WAHO Machine Tools

pressure: 300 t chamfer lenght: 3050 mm distance between columns: . mm Control: Cybeleg type: DNC880S total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• more information