General SKU070A418 LocationBarneveld MakeStork Plaatwellerij Velsen No.1308 Year of construction1979 Pressure Working pressure4.5 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume1000 Ltr. Motor11 KW Specified Features - Stainless Steel Reactor Reactor(1x) Capacity1000 Ltr, Useful 800 Ltr Vessel sizesdia. 1042x1000mm Conical bottomcheck Dished top sidecheck Manhole/hand hole dia. 200mm Top connectionsdia. 150mm + dia. 40mm + 2x dia. 25mm Outletdia. 145mm With jacket(80 Ltr) Max. temperature150 Degr. C. With propellor stirrermake Ekato, type EM-060 Motor11,0 KW, 380/660 Volt (Ex) Stainless Steel Reactors MaterialSta ...

ARRIVAL /LIVE BIRD HANG CONVEYOR KILLING& DEFEATHERING OH CONVEYOR AT 6 INCH CENTRES DRIVE UNTIS TENSIONERS CORNER WHEELS SHACKLES ELECTRIC STUNNER AUTO KILLER BLOOD TROUGH SCALDER 2X AIR AGITATED(2 STAGE SCALDING) LOW SCALD TEMPERATURE CONTROLLER HOT WATER BOILER. 3 BANK PLUCKER 2 BANK PLUCKER HEAD PULLER LEGCUTTER FOOT UNLOADER SHACKLE WASHER EVISCERATION OVERHEAD CONVEYOR AT 6 INCH DRIVE UNITS TENSIONER CORNERWHEELS SHACKLES VENTCUTTER 16 UNIT OPENER 16 UNIT EVISCERATOR 20 UNITS CROPPER 16 UNITS NECK BREAKER 16 UNITS INSIDE /OUTSIDE WASHER 12 UNITS FINAL INSPECTION MACHINE 12 UNITS BIRD UNLOADER. CHILLER CHILLER 9 METER AUGER COUNETFLOW IC ...

Stork injection moulding machine used for 1000 ml bottles, type: S3-90/75-12, machine number: 20766+20767, year of construction: 2003, 400 V, 3 Ph, 50 Hz, 454 A, capacity: 5.400 bottles per hour, 2 Plastic Systems material receivers, type: TCM25, year of construction: 2010, Motan dosing unit, type: HSX06-1-E010-0, plastic outfeed belt, belt width: 80 mm, total dimensions: 9200 mm x 4300 mm x 3550 mm. Including Munsters dehumidifier, type: ML1100 E, number: 0526 190504 50709 and Weger air handling unit, type: ZL 57, year of construction: 2005, dimensions: 1500 mm x 700 mm x 1920 mm, 2 Hydac AB oil/air cooler, type: SCAF 1L/10/1.0/B/M/A/LPF160B3/-/IBT45, dimensions: (2x) 600 mm x 480 mm x 610  ...

Stork injection moulding machine used for 1000 ml bottles, type: S3-90/75-12, machine number: 20706+20707, year of construction: 2002, 400 V, 3 Ph, 50 Hz, 454 A, capacity: 5.400 bottles per hour, 2 Plastic Systems material receivers, type: TCM25, year of construction: 2010, Motan dosing unit, type: HSX06-1-E010-0, plastic outfeed belt, belt width: 80 mm, total dimensions: 9200 mm x 4300 mm x 3550 mm. Including Munsters dehumidifier, type: ML1100 E, number: 0526 190504 50705 and Weger air handling unit, type: ZL 57, year of construction: 2005, dimensions: 1500 mm x 700 mm x 1920 mm, 2 Hydac AB oil/air cooler, type: SCAF 1L/10/1.0/B/M/A/LPF160B3/-/IBT45, dimensions: (2x) 600 mm x 480 mm x 610  ...

Closing unit Clamping force t: 330 Opening path mm: 620 Holm size mm: 675 x 675 Installation height min/max mm: 200/620 Plate size: 1000 x 1000 Spraying unit Screw diameter mm: 62 Spray weight gr: 865 Spray volume cm3: 951 ...

• more information

STORK RHO40 homogeniser. 3800 l/hr, 250 bar, single stage. equipped with hydraulic operated rotating homogenising valve. fully reconditioned, excellent condition.  ...

• more information

Kat. No. 12-2155 in a very good condition max. working pressure allowed: 1,8 bar max. temperature allowed: 130°C DxH: 1800 x 5000 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

STORk RHO40 Homogenisator. 3800 l/hr, 250 Bar, eine stufig. ausgestattet mit dem hydraulischen bedienten Drehende homogenisierventil. völlig wieder instand gesetzt, sehr gutem Zustand.  ...

• more information

CAP.: 25 CARTONS/MIN., 300-395 x 227-300 x 250-273 MM - L x W x H, 8 KW  ...

• more information

Horizontal side channel pump Materials: - Case: 1.4581 - Wheels: 1.4408 - Wave: 1.4571 Housing sealing: single-acting sliding ring seal, carbon/silicon carbide/viton Version A6: Pump mounted on base plate elastically coupled with 1.35 kW IEC standard rotary current motor Pressure: 2 bar Power: 800 l/h Revolutions: approx. 1,450 rpm Rated frequency: 50 Hz Engine power: 230/400 V Protection class: IP 55 Type of protection: E Ex eII T3 Type of construction: B3 Pumps partly unused, therefore in very good condition!